Compatibility between MV on 10g from 8i Master Database ?

We have a master DB on 8i and we are currently using MV on DB 9i,
Now we are going to migrate DB 9i to 10g so i need to know if MV between 10g -> 8i is supported.
Thanks in advance

Babu Baskar wrote:
Replication never support different version.
ThanksWhy not ???
Please refer to
Planning your Replication Environment
Interoperability in an Advanced Replication Environment
If you plan to configure an Advanced Replication environment that involves different releases of Oracle
at different replication sites, then your environment must meet the following requirements:
Oracle Database 10g master sites can only interact with Oracle8i Database release 8.1 or later master sites.
Oracle Database 10g materialized view sites can only interact with Oracle8i Database release 8.1 or later master sites.
Oracle Database 10g master sites can only interact with Oracle8i Database release 8.1 or later materialized view sites.
Oracle Database FAQs
</br>

Similar Messages

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5 and I did the usb with compatibility software-once installation start from dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the instalation?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
Manuel

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

Need to pull postal code in SO from customer master instead on postlcd/city

I want postal code to be pulled in sales order - partners tab for bill to party from customer masater/ under PO box adress.
Currently it is pulling postal code/city from customer master/ under street address.
Is there any standard con-fig available for same ?
please reply,
Thanks and regards,
Sujit

normally not but in asset reporting there seems to be a relation between structure and report-name (not tcode)
go to tcode se11 and search for structures with search term FIAA_SALVTAB* and you'll find some structures.
The last part of the name (RABEST, RABEWG ) is the link to the report (RABEST01, RABEWG01)
hope that helps
Andreas

Compatibility between CRM 4.0 and IS-U 4.64

Hi,
My company is using SAP IS-U 4.64 and is studying the use of SAP CRM. Does there is any problem of processus compatibility between these two versions ?
I don't find any document on the market place or in sdn. Does there is a document that shows the optimization for cross application use of SAP ?
Thanks
Thomas

Hi Gaurav,
I've dealt with both realities (specially in IC Webclient) and from the configuration point of view and in my opinion, it is basically the same.
For me the main change is that, in IC webclient scenario, instead of you do some customizing in a XML code, in CRM5 you'll do it by configuring tables.
In CRM5, you'll have some nice functionalities that CRM4 doesn't have (e.g.: You can choose with channels your transactions are allowed, Email Workbench, ERMS categorization is time dependent, and so on...), but the big jump is given when you compare CRM5 to CRM6 (or CRM 2007).
Kind regards,
Bruno

Text linkages from material master to purchase requisition

I already set the text linkage between basic data text in material master with item text in PR. I left fix indicator blank since I want the text to be adopted automatically.
I run MRP and create planned orders. Then I convert planned order to purchase requisition. Material master basic data text is not shown in purchase requisition. I tested using N and * and they both show. With N it shows (reading from material master) and I accnot modify it. With * it shows but I have to adopted to actually store the text as part of this document. With blank is not working. We want the text from material master to be automatically adopted in PR without manual intervention as with *.
Thanks and regards, Jose Oyon.

Hi
If got ur query correctly : you want to make short text field in Preq as Display.
If yes then go to Tcode OLME (or SPRO) -> Purchase requistion->Define Screen layout at doc level->select ME51N--->double click basic data, item and make short text filed as display.
regards
rahul.

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

Compatability Matrix for Oracle 10g

I'm searching for the compatability matrix for Oracle 10g database. Need certified combinations for Operating system (Unix/Windows), Application servers (BEA/IBM) , Web servers, etc.
Can anyone post me the link?
Thanks in advance.

I'm searching for the compatability matrix for Oracle 10g database. Need certified combinations for Operating system (Unix/Windows)Here: http://www.oracle.com/technology/support/metalink/index.html
Application servers (BEA/IBM) , Web servers, etc.There are not cert. matrices for app. servers from other vendors.
You can use whathever application server in combination with Oracle 10g BEA/IBM/JBOSS, etc. Everything you need appropriate client (for example for application in Java - Oracle JDBC connector which is free to download).

Still no compatibility between Storage Client Library v3 and emulator?

Hi,
According to this blog post:
I'm apparently unable to post a link, but here's the text from the blog. I'm sure you can find it via google if interested.)
<<<<
Storage Emulator Guidance
As mentioned above an updated Windows Azure Storage Emulator is expected to ship with full support of these new features in the next couple of months. Users attempting to develop against the current version of the Storage emulator will receive Bad Request
errors as the protocol version (2013-08-15) is unsupported. Until then, users wanting to use the new features would need to develop and test against a Windows Azure Storage Account to leverage the 2013-08-15 REST version.
>>>>
So it seems there was not compatibility between the storage emulator and Storage Client Library v3. I'm wondering if that is still the case. I get a 400 error when calling container.CreateIfNotExists() when pointing to local storage, but no problem pointing
to production storage. I'm using SCL v3.0.2.
Thanks...
-Ben

Hi,
Please see
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/c961d0df-e6ab-4563-958c-b3646ee2cd9d/the-value-for-one-of-the-http-headers-is-not-in-the-correct-format?forum=windowsazuredevelopment#16892f11-498d-4975-aa4b-adfa12b03fea
Here is a snippet of this thread.
Storage Emulator 2.2 is currently incompatible with Storage Client Library 3.0.0.0. This has been mentioned in Storage Team Blob as well:
http://blogs.msdn.com/b/windowsazurestorage/archive/2013/11/27/windows-azure-storage-release-introducing-cors-json-minute-metrics-and-more.aspx (Please
read "Storage Emulator Guidance" section towards the end of the post).
It may be fixed in the next version.
Hope this helps
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Launch Discoverer 10g from Oracle Applications Menu

Please provide steps to launch Discoverer 10g from Oracle applications menu.
Thanks in advance.
suresh

Hi,
Follow these steps....
The process is in 3 stages _(stage 1 will be done only once for all the reports)._
Stage 1:
Set the application discoverer relevant parameters.
Perform this stage only once.
1.1 Enter the application in System Administrator responsibility.
1.2 Choose menu 'Profile' and then submenu 'System'.
1.3 Find the desired profile by filling 'Icx%Discoverer%' and press Find button.
1.4 Fill the fields (only the values) as described in the table of values bellow.
Parameter Value
ICX: Discoverer Default End User Layer Schema Prefix your eul name without the suffix (_US).
note that if you have several invs it can be diffrent between them.
ICX: Discoverer End User Layer Language Override American English
ICX: Discoverer Launcher http://your_server_name:7777/discoverer/viewer?Connect=[APPS_SECURE]
ICX: Discoverer Release 10 or any other that you are using
ICX: Discoverer Viewer Launcher http://your_server_name:7777/discoverer/viewer?Connect=[APPS_SECURE]
ICX: Discoverer use Viewer Yes (or not if you want plus to open - but change the viewer to plus in the link as well - the previos parameter)
Don't forget to press save button.
Stage 1 Ends.
Stage 2:
Build an oracle application function for each discoverer report.
Perform this stage for each report.
2.1 Enter the application in System Administrator responsibility.
2.2 Choose menu 'Application' and then submenu 'Function'.
2.3 Fill needed values in each tab by the next instructions (function values)
2.3.1 Description tab – fill the function, function user name and the description. Notice that the function value should be without spaces.
2.3.2 Properties tab – fill the:
Function with the same name you have choose in the previous tab,
Type with 'SSWA plsql function',
Maintenance Mode Support with 'None' (Default value),
Context Dependence with 'Responsibility' (Default value).
2.3.3 Form tab- fill the:
Function with the same name you have choose in the previous tab,
Form & Application fields leave empty,
Parameters – there are two options available:
1st Leave it empty – will cause the function to open the discoverer all reports web page and user will have to choose a specific report from the list .
2nd Fill it with value '=workbook=name of the workbook' but without spaces, convert the spaces (if there are any) from the workbook name to + (plus) sign.
For example '=workbook=BI+SERVICE+Performance' represents the string for the 'BI SERVICE Performance' report.
Note: you can also send parameters to the report but since almost all the parameters have a default value (accept from dates) it's not necessary.
2.3.4 Web HTML tab – fill the HTML call with ' OracleOASIS.RunDiscoverer'.
Don't forget to press save button.
Stage 2 Ends.
Stage 3:
Build an oracle application menu or submenu for each discoverer report that represented by the function you has created in stage 2.
Perform this stage for each pair - responsibility + report/function.
3.1 Enter the application in System Administrator responsibility.
3.2 Choose menu 'Security' and then submenu 'Responsibility' and then submenu 'Define'.
3.3 Locate the needed menu by the responsibility that you want to enable her to use the report – of course that the report should be granted for the responsibility via discoverer mechanism as well.
Do it by clicking on the flashlight that located in the left upper corner and find the needed responsibility.
3.4 Find the needed responsibility and select her via next screen (Don't forget to use % as wildcards)-choose by double click on her
3.5 Copy the menu name that related to the responsibility you have choose from the menu field located in the next screen and close the window.
3.6 From the navigator screen choose menu 'Application' and then submenu 'Menu'.
3.7 Locate the menu that you've copied in 3.5 (with the flashlight and the find screen, double click on the menu name – similar to 3.3 and 3.4) via next screen.
3.8 Press on the 'add record' sign (+) that located in the right upper corner of the screen (Do it after the mouse sign and focus is in the rows as you can see the oval mark).
3.9 Fill the prompt with what you want the user to see in the menu that will activate the report link and after fill the user function name as you have build her in stage 2 (Don't forget to save it).
Don't forget to press save button.
Stage 3 Ends.

Uninstall oracle 10g from Linux Red hat

is any body know the standard procedure to uninstall oracle 10g from linux red hat.

The correct answer is "Undo the changes you made during the install"
By this I mean:
Stop all of the processes
Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
Delete the oraInventory directory if it isn't inside ORACLE_BASE
Delete /etc/oratab, /etc/oraInst.loc
Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
Undo any environment settings you may have modified (in .bash_profile and bashrc)
That should be just about it. That's how I usually clean out my system between installs.
~Jer

Difference between forms6i and 10g

Is there a big Difference between forms6i and 10g? Can someone with 6i experience use forms 10g without problems?
Thanks

In our company Forms applications are still developed in 6i C/S, but they run without modifications, just recompilation, on
- 6i C/S (obviously :-))
- 6i Forms server
- 9i Forms services 9.0.2
- 10g Forms services 9.0.4
- 10g Forms services 10.1.2
We have customers with all these architectures on Linux and Windows, and they have DBs from 7.3.4 to 10g.

Compatibility between Exchange 2007 service packs

Hi all, I have 5 servers Exchange:
- 3 Servers CAS and HUB
- 2 Servers Mailbox server in Microsoft Failover Cluster (MSCS)
Domain Controllers are all
Windows Server 2003 SP2
The versions of Exchange 2007 SP1 servers are all:
8.1 Build 240.6
I have thought about installing SP3 and RU13 in all 5 servers for Exchange, but I'm going to install SP3 and RU13 on 2 servers CAS / HUB and the following week at the other CAS / HUB server.
Finally, the following week in the two Mailbox Servers.
Is there any problem if I miss 2 servers CAS / HUB with SP3 RU13 and the other CAS / HUB in SP1, this will only be for a few days?
Is there any problem if I leave the servidors Mailbox Servers in SP1 while CAS / HUB are in SP3 RU13, this will only be for a few days?
regards
Microsoft Certified IT Professional Server Administrator

Hi Yupikaiey.
Only thing you should be concerned is if you have CAS-CAS proxy or the Mailbox Cluster part.
Your current plan looks good. Just stay alert for any uncommon issues popping up, which would normally mean due to the difference.
If you upgrade your servers in this order, you may avoid potential service interruptions.
Details below:
Version Constrains are more of between roles of 2007-2010-2013 and not between same version SPs or RUs.
Exchange 2013 Server Role Architecture
The Past: Exchange 2007 and Exchange 2010
Our goal was to make these server roles autonomous units. Unfortunately, that goal did not materialize in either Exchange 2007 or Exchange 2010. The server roles were tightly coupled along four key dimensions:
2.This also necessitated a tight versioning alignment – a down-level Hub Transport or Client Access shouldn’t communicate with a higher version Mailbox server; in some cases this was enforced (e.g., Exchange 2007 Hub Transport servers cannot deliver messages
to Exchange 2010 Mailbox servers), but in other cases they were not (e.g., an Exchange 2010 SP1 Client Access server can render data from an Exchange 2010 SP2 Mailbox server).
The versioning restriction also meant that you could not simply upgrade a single server role to take advantage of new functionality – you had to upgrade all of them.
The Present: Exchange Server 2013
If I upgrade the Mailbox server with a service pack or cumulative update, then for a given mailbox hosted on that server, all data rendering and content conversions for that mailbox will be local, thus removing version constraints and functionality issues
that arose in previous releases.
Exchange 2007 Servicing
http://technet.microsoft.com/en-in/library/dd421853(v=exchg.80).aspx
Deployment Order
Our test infrastructure guarantees that Exchange hotfixes work across multiple server roles. The order in which you apply the update rollup to the servers is not important except if you are deploying CAS-CAS proxying. Because the update rollups are not segmented
for different Exchange server roles or for specific file configurations, apply each update rollup package to all Exchange 2007 servers in your environment.
If you have multiple Active Directory sites, and if you deploy a Client Access server in the proxy sites that do not face the Internet, you must
apply the update rollup to the Internet-facing Client Access servers
and to the non-Internet-facing Client Access servers in the proxy site simultaneously. For other Exchange 2007 configurations, we recommend that you
apply the update rollup package to the Client Access servers before
you apply it to servers that are running other Exchange 2007 server roles, such as the Mailbox server role, the Hub Transport server role, and the Edge Transport server role.
Note:
Applying service packs and update rollups to clustered Mailbox servers requires specific planning and application steps. For more information about how to apply service packs to Exchange 2007 clustered Mailbox servers, see
Upgrading Clustered Mailbox Servers to Exchange 2007 SP1 or later. For more information about how to apply update rollups to Exchange 2007 clustered Mailbox servers, see
Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers.
For Patching and compatibility between versions:
Determine the service pack level of Exchange.
Update rollups are service pack dependent. For example, an Update Rollup 5 package is available for Exchange 2007 and for Exchange 2007 Service Pack 1. To determine the service pack level of Exchange, examine the
ExchangeVersion property. For more information about how to view the
ExchangeVersion property and about the build number that is associated with each Exchange version, see
Exchange Server 2007: Platforms, Editions, and Versions.
References:
How to Install the Latest Service Pack or Update Rollup for Exchange 2007
Exchange Server Updates: build numbers and release dates
We are looking at doing the roll-up to SP3
Coexistence of Exchange2007 SP1 and Exchange 2007 SP3
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Compatibility between Java crypto and open ssl

Hello
I have some question about compatibility between java crypto and openssl library.
This is my case:
1.I created DESede key and stored it to file:
SecretKey key = KeyGenerator.getInstance("TripleDES").generateKey();
File f = new File("c:\\key.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f));
dos.write(key.getEncoded());
dos3.close();2.I encrypt some file "c:\\normal.dat" through:
ecipher.init(Cipher.ENCRYPT_MODE, key2);
byte[] enc = ecipher.doFinal(normalData);
File f2 = new File("c:\\enc.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f2));
dos.write(enc);
dos.close();

You have carefully left out some critical java code, namely the Cipher.getInstance() method. You'll notice in the documentation for this method that there 3 components to the "transform" argument of this method, the algorithm, the mode, and the padding. All of these must match exactly with the what openssl is using. Furthermore, if you are using one of the modes which require an IV, like CBC mode, then this must match exactly too. If you don't explicitly specify some of these parameters, you might get default values supplied. It is up to you to find out what these are.

Compatibility between MV on 10g from 8i Master Database ?

Similar Messages

Maybe you are looking for