Compatibility between tag names in Professional and Binding in Designer

Q: Is there a way to get the same 'recognition' Acrobat Professional uses in their object/tag names to match up with an object name set in Designer?
We have tried naming the objects in an xdp/pdf using Designer, but without the same results as if these objects were named in Acrobat Professional.
History: Currently we use Designer 7.0 to build XDP's of our forms (350+) to run on FormServer. Many fields on each of these forms 'prefill' with advisor/client information from settings in the Binding tab. These forms are then stitched together to make on large PDF.
There are approximately 30 of these forms that are also used/shared in another 'forms tool' that uses the tag names set through Acrobat Professional. Professional doesn't allow us to do any 'Advanced Editing' if the form was designed in Designer.
So...,
Our process for these (30) forms is to [1]build the forms in Designer (since we need the XDP for other apps), [2]'dumb' the form down page by page in Illustrator, [3]merge these individual pdf's back into one pdf through Professional, [4]and then proceed with the interactivity. (!whew!)
With this process, we can [5]then add in tag names to each object that needs prefilling by the other system and finish the form.
Not too bad for 30 forms - but we are now looking to inherit 300+ more forms.

Conversion is strictly necessary and irreversible between the latest version of Power Pivot for Excel 2010, and Power Pivot in Excel 2013 (365 or disc - Pro Plus). Once converted to 2013, there is no way to open the same file again in 2010.
If you do not have the latest version of Power Pivot for Excel 2010, I believe you will need to upgrade that, then use that to open an older Excel 2010 workbook, then open in 2013 to upconvert.
If you have users on multiple versions of Excel, SharePoint is your best bet for sharing a Power Pivot workbook.
If you have users on multiple versions of Excel who must collaborate on building a workbook, you've got some installations, VMs, or spare laptops coming your way.

Similar Messages

File compatibility between CS 5.5 MAC and CS 5.5 PC?

We are currently a PC based shop with a few MAC's tossed here and there. I have been asked to verify the file compatibility between CS 5.5 MAC and CS 5.5 PC. Are the files fully compatible? i.e. can user A on a PC create an illustrator/photoshop/etc document which is then opened by user B on a MAC with no issues?
Thanks!

Yes. For the programs you mentioned it has been forever this way and even for programs like Premiere Pro or Encore, that were platform-specific until recently, this is no longer an issue ever since CS5. Of course you will still have to take care of different handling for file paths on different platforms for externally linked files, but that's a different matter and nothing specific to Adobe...
Mylenium

Still no compatibility between Storage Client Library v3 and emulator?

Hi,
According to this blog post:
I'm apparently unable to post a link, but here's the text from the blog. I'm sure you can find it via google if interested.)
<<<<
Storage Emulator Guidance
As mentioned above an updated Windows Azure Storage Emulator is expected to ship with full support of these new features in the next couple of months. Users attempting to develop against the current version of the Storage emulator will receive Bad Request
errors as the protocol version (2013-08-15) is unsupported. Until then, users wanting to use the new features would need to develop and test against a Windows Azure Storage Account to leverage the 2013-08-15 REST version.
>>>>
So it seems there was not compatibility between the storage emulator and Storage Client Library v3. I'm wondering if that is still the case. I get a 400 error when calling container.CreateIfNotExists() when pointing to local storage, but no problem pointing
to production storage. I'm using SCL v3.0.2.
Thanks...
-Ben

Hi,
Please see
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/c961d0df-e6ab-4563-958c-b3646ee2cd9d/the-value-for-one-of-the-http-headers-is-not-in-the-correct-format?forum=windowsazuredevelopment#16892f11-498d-4975-aa4b-adfa12b03fea
Here is a snippet of this thread.
Storage Emulator 2.2 is currently incompatible with Storage Client Library 3.0.0.0. This has been mentioned in Storage Team Blob as well:
http://blogs.msdn.com/b/windowsazurestorage/archive/2013/11/27/windows-azure-storage-release-introducing-cors-json-minute-metrics-and-more.aspx (Please
read "Storage Emulator Guidance" section towards the end of the post).
It may be fixed in the next version.
Hope this helps
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ITunes compatibility between OSX 10.6.8 and iOS 7.1.2?

I recently got a new iPhone 5S and was trying to sync it with the iTunes library on my (admittedly old) late '08 MacBook (Apple spec page). However, when plugging my phone into the laptop, I received an error message which read "iTunes could not connect to the iPhone "[my device name]" because the device timed out."
Simply syncing from the cloud isn't an option, as I've got a lot of music that was ripped from my physical media collection, or was created by me, and doesn't live there.
I'm running OSX 10.6.8 on my laptop, mainly because my understanding is that the newer OSX versions are RAM hogs for older machines, and that will make this computer much less useful for its original purpose (audio processing applications). Is this an insurmountable 'generation gap' between OS's, or does a solution exist? Thanks.
Processor: 2.4 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3

https://www.google.com/search?q=itunes+sync+device+timed+out

Can anyone tell me the compatability between macbook pro running lion and the kindle touch?

I originally wanted an Ipad, but when I already have a macbook pro, and an android phone, planning to upgrade to an iphone when I qualifiy for one, I could not see paying the money for an ipad when between my computer and phone I have all the capabilities covered. However, being a college student who uses pdf files of textbooks a lot, sometimes pulling out my laptop every time I want to look some little thing up in a textbook gets old. And carrying all my engineering textbooks everywhere is going to kill my back one of these days. So I want a cost friendy e-reader or tablet. Ive heard good things about kindles. But what is the compatibility like for a mac? will it be a pain in the but like my android?

Get an iPad. Once you have that, you may not really need to spend the money on an iPhone, since the iPad will do everything the iPhone does (and be easier to see doing it) except make phone calls, and even an Android phone can do that.

Compatibility between R/3 4.6c and BI 7.0

Hello,
First of all, I want to stress out that I just spent hours reading SDN and service marketplace, and I just couldn't find a precise answer, so that's why I ask you this ..
we have SAP R/3 4.6c, SP 23, no BW sofar.
We plan to have BI 7.0, and I have been asked to which SP level we had to be in SAP R/3.
I understand that we have to get the right PI version ( PI 2004.1 SP10 if I'm right ?), but what about the SP level of SAP R/3 itself ??
Thank ou very much if you can help.

Hi Andreas,
Thank you for your quick answer !
In fact I had already read this thread...So I did the 'R/3' search, and read it all.
But now maybe I am a little bit more stupid than I thought, because when I read the compatibility matrix between SAP R/3 SP level and netweaver here :
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000653817&
I just don't understand:" PI 2004.1, with R/3 SP01 (??) and R/3 plug-in SP10 "
So all I understand is I must have the 2004.1 plug-in with SP10 on my SAP R/3 4.6c system..am I right ?
Thanks again

Compatibility between Sun C++ 5.1 and Sun C++ 5.2

Is it possible to create with Sun C++ 5.1 a shared library refering symbols from other libraries created with Sun C++ 5.2 ?

There should be no problem linking 5.1 to 5.2 objects. In fact 5.0, 5.1, 5.2 and 5.3 objects
are all compatible. Note this does not apply to debug binaries. Debug objects are compatible but
the information changed between releases. The latest version of dbx should be used in a mixed
environment.
Alan
Sun Developer Technical Support

Compatibility between D-Link wireline adaptor and Asoka wireline adaptor

WiFi coverage in my house was just plain awful with the old 2Wire gateway, no signal strength outside of the room the gateway is in. Better signal strength from my neioghbour's house! Bought a D-Link wireline adaptor pair and that fixed one connection problem. A recent problem had AT&T replace the old 2EWire unit with a Arris NVG589 gateway. Slightly better reception around the house, but not stunning in a couple of rooms. Technician left me with a pair of Asoka wireline adaptors to help solve my bad reception problem. Plug and Play they aren't. I cannot find the magic for them to connect with my D-Link adaptors. Any suggestions? ThanksPeter

ATT tech replaced the gateway with a brand new system. Admitted I seem to have a dead spot when it comes to wireless internet in one room - remote TV box in that room seems to work fine. I have a D-Link wireline adaptor set up between my gateway and the bedroom - works find for my son's Playstation. Tried to add the ASOKA adaptor into that "network" doesn't seem to be compatible with the D-Link.I'll have another try - the box teh ASOKA adaptors came in didn't have any instructions, so I may be doing something wrong. More research, it seems

Compatibility between Oracle 8.1.7 and HP UX 11iV2 (11.23)

Dear,
We need to know if Oracle version 8i (8.1.7.4) is compatible with the version of HP UX 11iV2 (11.23) installed on a HP superdome.
This is quite urgent because we replace the server where the DB runs by another.
Is there a document with the compatibility ?
Do we need to install Oracle 8i 64 bits ?
Thank you in advance,
Xavier

if Oracle version 8i (8.1.7.4) is compatible with the version of HP UX 11iV2 (11.23) Desupported configuration. 
 
Is there a document with the compatibility ? 
Oracle's Certification Matrices 
 
Nicolas.

Compatibility between SAP ECC 6.0 and LDAP

Hi,
Does the current version of SAP ECC 6.0 has any dependency on the Domain and Forest Functional Level of Active Directory?
Currently the Domain Functional Level is Windows 2000 native and the Forest Functional Level is Windows 2000.
The Domain and Forest Functional Level will be raised to Windows Server 2003.
While raising the Domain and Forest Functionality level to Windows 2003 provides additional features and capabilities as far as Active Directory enhancement it does not cause any issues with the application as such.
It will be a good idea to confirm from SAP if there are any dependencies on this.
Please do let me know if you need more information or any help from me.
Thanks,
Saurabh

Hello,
It is good to get on to the win 2003
Read the SAP Note and refer the microsoft support link for further info:
1377424 - Information on Active Directory domains and trusts
http://support.microsoft.com/kb/310996
Regards,
Sai R.

Project File Compatibility between Final Cut Pro 6 and 7?

I have a group of three editors who are on Final Cut 6 while I am on 7. Is there any way to be able to share project files with Proxi's back and fourth?
Thanks...

What would be the best way then to have a group of editors work on the same project that is on Final Cut 7 but with some editors only able to work on Final Cut 6?
Thanks as always.

Compatability between Roboform 6.10.2 and Firefox 4.0?

Installed the latest 4.0 version of Firefox, and Roboform version 6.10.2 wouldn't work properly with it. When I clicked on the Roboform toolbar, instead of bringing down the toolbar menu, the web page for the latest version 7 of Roboform came up in Firefox.
Had been using Roboform version 6.10.2 with version 3.6.1.6 of Firefox for many years, and everything did work perfectly, so uninstalled Firefox 4.0 and then reinstalled Firefox 3.6.1.6 and Roboform then worked properly again.
My question is: does the new version 4 of Firefox work with the previous version 6.10.2 of Roboform, or is it necessary to update my Roboform to version 7 so that the two will work together?
Thank You,
Rick

Roboform expects their users to update to version 7 for Firefox 4.0 support.

Can WS name and Binding name be changed?

Hi,
When we generating the wsdl file from a sender agreement, A webservice name and Binding name have been created in the wsdl file.
web service name AS "XI_20ec1074cc28367c964b34f226098f29_Service"
and binding name as "ServiceInterfacenameBinding"
But the legacy people who are going to access this webservice need this names to be changed. is it possible from PI??
i mean like instead of "XI_20ec1074cc28367c964b34f226098f29_Service" they want some name like "getProductinformation"
and binding name like as "ProductinformationBinding"
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Sep 1, 2010 8:32 AM

Hi Balaji,
It s not possible within PI, as this Information is generated when you retrieve the WSDL from the Directory.
However if you want to change that you can do it manally before forwarding the WSDL to other people.
The name of Binding/Service has no impact on the call at runtime.
Best regards
Sebastian

Case sensitive Tag names

Hi friends
I have a question, is it possible to transfer case sensitive tag names into xml structure ? for exemple, I want to transfer Tag name "DateCreated" . I did a test but start tag names is "DataCreated" and it is Translated in "DATACREATED" and this is a problem.
Thanks
Sergio

Sergio,
Usually what ever you have given in your xsd or message type you will have the same. So please check it. I just tested this and it seems to be the same as defined in your xsd or message type.
Regards,
---Satish

DI Integrator XI and Data Service Designer

Hi all
I am playing with DI XI (11.7) now, but very soon we would have Data Service Designer (new version of DI which is called Data Service Designer). I'm just wondering what the difference is between DI Integrator 11.7 and Data Service Designer. The interface and object types are very different and a big surprise for me? Or I might ask what's new in Data Service Designer?
Thanks for your help.

You will be very familiar with DataServices Designer. You will find more transforms - the data quality transforms - and a few menu items, flags etc. But really, DataServices is just a name change. For DQ customers things changed a lot.

Compatibility between tag names in Professional and Binding in Designer

Similar Messages

Maybe you are looking for