Compatibility between version 8 and 9

We have a new Windows 7 Professional 64bit machine arriving soon, on which we want to install Framemaker and Creative Suite Design Standard 4.
Design Standard looks fine - it will be the same version so I assume there will be no issues, Framemaker on the other hand looks like it could potentially cause some issues.
We have 3 people using Framemaker 8 on Windows Vista Business, I'm assuming that for full Windows 7 support we should purchase Framemaker 9, however, having had a combination of CS3 and CS4 working together before I know that different versions can cause major headaches for our design team - in the case of CS it involved importing and exporting files and caused all sorts of problems. We've all on CS4 now.
So, are there any compatibility issues between 8 and 9, and is 9 the version to go for if using Windows 7?
I searched the site for quite a while (and other random Google hits) but I couldn't find anything conclusive.
Thanks in advance!

I have had no problems moving from 8 on Windows XP Pro to 9 on Windows 7
64 Professional nor in interoperating
with CS4. But my files may be much smaller than yours.
Ed

Similar Messages

I like ti known about compatibility between Windows 8 and iTunes

I like ti known about compatibility between Windows 8 and iTunes

It works for some and not for others.
At this time, there is no publicly available version of iTunes that is supported on Windows 8.
Only Apple knows when that will change.

Compatibility between Java crypto and open ssl

Hello
I have some question about compatibility between java crypto and openssl library.
This is my case:
1.I created DESede key and stored it to file:
SecretKey key = KeyGenerator.getInstance("TripleDES").generateKey();
File f = new File("c:\\key.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f));
dos.write(key.getEncoded());
dos3.close();2.I encrypt some file "c:\\normal.dat" through:
ecipher.init(Cipher.ENCRYPT_MODE, key2);
byte[] enc = ecipher.doFinal(normalData);
File f2 = new File("c:\\enc.dat");
DataOutputStream dos =new DataOutputStream(new FileOutputStream(f2));
dos.write(enc);
dos.close();

You have carefully left out some critical java code, namely the Cipher.getInstance() method. You'll notice in the documentation for this method that there 3 components to the "transform" argument of this method, the algorithm, the mode, and the padding. All of these must match exactly with the what openssl is using. Furthermore, if you are using one of the modes which require an IV, like CBC mode, then this must match exactly too. If you don't explicitly specify some of these parameters, you might get default values supplied. It is up to you to find out what these are.

What are the differences between version 9 and X of the Reader?

I have been running various releases of Version 9 of the Adobe Reader for a long time. I have noticed that when there is an update available for Version 9 and I click on the "more information" button on the update, it takes me to a web page where there is information on the latest levels of both Version 9 and Version X, but I cannot find any information on what the differences are between version 9 and X. I read the FAQ and found nothing on this, and I even searched this forum and was surprised that there were no topics on this question already.
Can someone tell me the differences between the 2 versions. I am running Windows 7; is that important as to which version of Reader I should use?

http://www.adobe.com/products/reader.html
http://blogs.adobe.com/asset/2010/07/introducing-adobe-reader-protected-mode.html
Both Adobe Reader 9 and Adobe Reader X work on Windows 7 .
Hope this helps.

Connection key compatibility between Contribute 3 and 4

Does anyone know whether Contribute connection keys are
compatible between versions 3 and 4?
Can I create a connection key in Contribute 3 for a version 4
client or vice versa?
At the moment, I have several customers who may be on
different versions of Contribute and want me to handle the
connection key side of things, so I need to ensure that the keys I
create will work in either version.

For windows users can you create a connection key in Windows machine and send the same.

Compatibility between 32 bit and 64 bit of TimesTen

Hi All,
Please tell me is there any document avialable to see compatibility between 32 bit and 64 bit of TimesTen ?
Regards
Pratheej

Hi Pratheej,
1. You cannot replicate between 32 and 64 bit TimesTen.
2. For direct mode connections, the application must be the same 'bittedness' as TimesTen 932-bit app -> 32-bit TT, 64-bit app to 64-bit TT).
3. For client/server connections a 32-bit app can work with both 32 and 64 bit TT. A 64-bit app can only use 64-bit TT.
If you want to deploy a 32-bit app using 64-bit TT on the same machine we have an optimised shared memory client/server connection (shmipc) mode. This is much faster than TCP or Unix sockets but is still much slower than direct mode.
HTH,
Chris

Difference Between version 8 and cs3/4 ?

Hi I have dreamweaver 8 and I use it for all my tasks related to website development.
I just wanted to know if there is any significant difference between version 8 and cs3/4 ?
Suggestions appreciated.

I don't think any of those you have listed are major additions to my own personal workflow in my opinion David.
Nice add-ons but it's not like 'I really need this'.
I'd like a better computer each and every year but I can still do all I need with the one I have. Of course you never want to go back once you upgrade but its not as if you can't do what is needed with an older version.
Improved css rendering? I struggle to find an improvement apart from maybe overflow:hidden; I guess it may also be down to the way you write the css. I've never really struggled with css rendering from version MX onwards, others have.
Built in css layouts? I wouldn't touch those with a barge pole personally. They can remain in the domain of the inexperienced and when they come to alter them they are so complicated they won't have a clue where to start.
Spry widgets? Again overcomplicated and used mainly by inexperienced users.
Live view/live code? Personally have no use for it.
None of those you listed would effect my workflow. But as I said it's best to download a trial and take it for a spin.
DW in my opinion doesn't have much more in the way of development to offer apart from incorporating elements which are non-essential. Its a bit like the progress of all their software; they struggle with each new release to find anything wortwhile to include.

Difference between Version 20 and 21.0.025

Hi,
I want to know what is the deffence between version 20 and 21. i.e what are the new updates/improvements in version 21.

Which phone do you mean?

File Size Between Version 3 and 5

I'm evaluating Captivate version 5. When I import captivate version 3 projects into version 5 and then publish them, they turn out to be 2-3 times larger in size. I publish them as .exe's. As far as I can tell I have the settings matching between the two versions, for when I publish. Can anyone tell me if this is a known "feature", or possibly some setting that's new or different in version 5? I've tried lowering the quality of the puplished file, but I really don't want to live with the reduction in quality it's giving me.
Thanks for any help or info you can provide.
I'm evaluating version 5 because version 3 doesn't appear to play nicely with the current version of Adobe Audition, which I'm also evaluating. Having noise issues when recording my audio, so I've been trying to "edit with Audition" to take out the noise. This works well, but I end up having to edit and save the audio 3-4 times before it will actually save back into my captivate project. Haven't had these problems with version 5, but now my file size is ballooning up...

Im having the same problem....its very frustrating...
adam

File size difference between version 3 and 4

I'd like to know how to publish a file at the smallest possible size with Captivate 4.
I have 1 file that is 9176KB published with Captivate 3. The same file published with Captivate 4 becomes 10300KB. I didn't add any functionality just publish it once saved in 4.
What is the same content ~1MB bigger with the new version? How do I make it smaller?
Thanks,

Thanks for the hint! It did make me revisit those files and now I see the reason for the small file sizes: The Apple Finder does note update the file size view once a file was added to a folder. Here's what I did:
Opened a folder full of .NEFs in detail view in Finder.
Converted them using DNG Converter
Looked at the sizes of the files as they were shown in the Finder window allready open.
Unfortunately, those file sizes are not correct. If I open a new Finder window of the same folder, file sizes are correctly reported as between 3.5 and 5 MB.

Export/import compatibility between 2.0 and 2.2

If I upgrade my development environment to Apex 2.2 whenever it is released, can I export apps/pages from there and import into a Apex 2.0 environment?
Both export files have the following in them.
-- This date identifies the minimum HTML DB version required to import this file.
wwv_flow_api.set_version(p_version_yyyy_mm_dd=>'2005.05.01');So I guess the answer is yes, but I don't want to make any assumptions that would prevent me from deploying new/changed functionality into my existing 2.0 Production environment.
Can someone from Oracle comment on this?
Thanks

Vikas,
Yes, in most cases that will work just fine. There are two options on the application export page that would make it so you can't import your application in APEX 2.0, "Export Deployment Attributes" and "Export Comments". Selecting either of those will include metadata in the export which wasn't around in 2.0, so they affect the import compatibility.
Otherwise, apps and pages should be compatible with 2.0.
- Marco

Control on quantity and price between version 2 and version 0

Hi,
My client works on scenario where the cost planning (boq upload) is done in version 2 and operative is version 0, now the requirement is that, when they want to create a reservation the system should trigger error if change in quantity and price
for eg: 'X' material quantity is 10 nos. in version 2 (plan) and in the operative version 0 if the reservation is put for 11 nos then the system should trigger an error.
Also, if "X" item price is 10 rupees each and at the time of reservation after 1 year if it 20 rupees each then the system should prompt an error for change in price (NOT AVAC for budget exceed)
Kindly suggest if this can be done.

Harsh Saxena wrote:
Hi,
>
> For price check, AVAC will do the job, no need to go for different solution....
> else,
> you will need development for both price and quantity checking while creating reservation.
> or
> reservations can be generated automatically from the project if you attach the same materials as in BOQ to in activities in project. This way reservation will be created only for the required quantity only. For price either use AVAC or go for development.
>
> Regards,
> Harsh.
Hi,
AVAC will check the budget, they want a control on change in price.
Development has to be done from two different version please clarify how this can be done.
Boq can be uploaded in the operative project but they can even add a extra quantity or raise a new PR...kindly correct
Regards,
Reena

Compatibility between Oracle 6 and with new versions of Internet Explorer

Hi,
my client has a big Forms application. Currently, the application's users need to have installed older versions of Netscape in order to be able to load and see the Form´s applet. We developed a J2EE application for the client and this client has asked us to create a link between the Forms application and the J2EE application.
The easiest and most portable way to do that would be to create a link to the Web application URL. The problem is that we use lots of CSS and JavaScript which just can´t be rendered with the version of Netscape they are using. They told me that they cannot run Forms with newest version of IE or Netscape because they are not compatible with their version of Forms (which, I believe, is version 6). Is there a patch or workaround to be able to run the web application in the most recent versions of IE or Netscape/Mozilla/Firefox ?
The other way would be to create a link in the Forms application to run an script which would run a more recent version of Netscape or IE. But, in doing that, we would lose portability.
If option 1 is not possible (to use Forms with newest versions of Netscape/IE), do anyone know of any other solution to this problem ?
Regards,
Alessandro Coelho Ribeiro
[email protected]

We are running our 9i forms application quite happily in IE6 and I'm playing around with development in IE7 without any problems right now. Were they able to tell you if there were specific issues they had with running their forms application?
Richard

Compatibility between Photoshop CS4 and Lightroom 5 on a Mac

Hi,
A beginners question:
I am about to buy a Canon EOS 1200D Digital SLR Camera with EF-S 18-55mm f/3.5-5.6 IS II Lens. I am currently trying out Photoshop CC and Lightroom 5. I have Ps CS4 and I am thinking of buying Lr 5 in the future after the trial and I want to work with RAW photographs in the main.
Are there any compatibility issues that I should know about with the software versions I have/might buy and the RAW images taken by this model of camera? I need to have the answer(s) to this question before I buy the camera and the correct software.
For your information, I intend using a late 2013 MacBook Pro with a retina screen and 16 Gig RAM.
Many thanks,
David
(Brighton, UK)

The EOS 1200D was first supported in Camera Raw 8.4 and Lightroom 5.4
Camera Raw plug-in | Supported cameras
Camera Raw 8.4 is only compatible with Photoshop CS6 and newer
Camera Raw-compatible Adobe applications
So you'll be fine with Lightroom 5.4 or later.
However PS CS4 is not compatible with Camera Raw 8.4 and never will be. So you'll either have to upgrade to CS6 or join the Cloud.
Or you can use the free Adobe DNG converter, convert all EOS 1200D Raw files to DNGs then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

RV042 compatibility between older firmware and new

Hello all
We have several RV042 routers with older firmware version 1.3.12.19-tm.
We have purchased new RV042 routers as hot spare replacement that's coming with firmware version 4.1 installed.
We have a VPN tunnels between multiple sites using the older firmware version.
My question is: Will a RV042 with firmware version 4.1 connect to a RV042 with firmware version 1.3.12.19-tm and vice versa?

Jack,
i have seen some case come through customer having problems with connections between RV042 V2 to V3. So i wanted to test this in our lab. I tried to make them disconnect and couldn't please note this was an ideal connections no ISP involved. I did put them on the T1 connection but both public ip address are really as if locally connect as they will hit the gateway and route back through several switch i still didn't have any trouble. I have seen some V3 have trouble with older modem and cause duplex mismatch, so if the connection between modem and router is solid. Your tunnels should be solid. If you have trouble give Cisco Small Business a call @ 1-866-606-1866 and open a support case on the v3 router.
Jasbryan

Compatibility between version 8 and 9

Similar Messages

Maybe you are looking for