Compatibility BOXI Deski and BO 6.5.

Hello to all,
My client refuses to migrate its BO 6.5 server to a BOXI 3.1 sp3 system.
My question coul be strange but it is possible to connect with a BOXI deski to a BO 6.5 repository?
Thank you in adavance for you fast answers?
Best regards.
Julien LEFEVRE
Edited by: Julien Lefevre on Apr 1, 2011 1:36 PM

No, it is not possible.
BO XI tools cannot connect to 6.5 repo, nor 6.5 tools to XI ....

Similar Messages

  • New VMS/IPC boxes - speed and pricing

    For the most part, I've been a very happy FiOS customer. The internet side has gone out exactly once in the year I've had the service, and it was restored within an hour. TV has dropped out twice, both times very late at night (I assume for head-end maintenance). Reliability is better than every other ISP I've ever had, combined.
    That said..
    I wanted to snag another STB for the house - found out the local stores had all been closed (I can understand why from the financial aspect, but it was still a shock pulling up to my old store to pick up another STB.. and finding a "for lease" sign, when I'd been by there 2 months prior), so I looked at options online. The new VMS + IPC boxes looked promising, especially since they added the ability for the entire house to pause, rewind, schedule recordings, etc, from any TV - instead of only the DVR being able to do that (though the old boxes could stream recordings from the DVR).
    My chief complaint so far - while the VMS box itself is responsive, the IPC boxes are painfully slow to respond to anything. Picture quality is fantastic, but using them feels, to put it in nerd terms, like using a Pentium 90 with Windows XP and 128MB RAM. They take 5+ to respond to anything more than a channel change (and even that takes up to 3 seconds), and frequently "lose" remote key presses if you try to, say, hit guide, hit page down, then try to arrow down to the channel that you know is on the next page. It literally feels like a throwback to the earliest digital set top boxes from Comcast/Time Warner - the first ones with built-in TV listings in the mid 1990s. The speed is right on par with them; the only thing faster right now is they don't shut down for 30 minutes a day to update the TV listings.
    I've gone through the built-in diagnostics on the boxes to verify signal levels - they're decent (not perfect, but this is a 20 year old house with mostly original coax), but we have no pixelation or picture drop-out, so I would think they could carry the basic stuff between the IPC boxes and VMS pretty easily. The router certainly has no problem handling the 75/35 on the same coax (speedtest shows 85-90 down, 35-40 up, with a ~5ms ping, no matter which cable outlet it's plugged into)..
    My other complaint - why did Verizon move to "rooms" for pricing? I thought I was getting a DVR plus 3 STBs (since I ordered 3 STBs and asked for a DVR), instead of a VMS + 2 STBs - and I'm paying much more than I did for the old DVR + 2 STBs.
    With the griping out of the way - is there a reasonable chance that firmware updates will help with the speed of the IPC boxes? Or is there a chance it's a cabling issue? (I have no problem pulling new coax or cat5e, and I can provide signal levels if that'll help) If not, is there any chance of getting the old QIP7232 DVR + QIP7100 box back (and adding another 7100), and switching back to what I was paying before? I know they're a bit antiquated (especially the 7100s), but they were much more responsive, and didn't make me want to throw the STBs through the window. It just seems really rediculous that I'm paying such a large premium (plus the "upgrade fee") for equipment that, in terms of the user experience, is much worse.
    Again.. been a happy customer for a long time, but the new terminals are super painful to use.
    Thanks.

    If this is the case.  I think I will wait till the bugs are worked out
    Question what were you paying before and after for the boxes.   So what was the old DVR + 2 STB's and the new DVR plus 2 stb's
    Trying to get an idea of what you meant by way more.  Most people said same pricing and a small $20 or so upgrade fee

  • TS3297 Every time I open iTunes to listen to music, not access the iTunes Store, I get the password sign in box, over and over again. When I try to access the iTunes Store it does not except my password. This has happened since the last update.

    Everytime I open iTunes to play music, NOT to access the iTunes Store, I get the password sign in box for the iTunes Store. If I click cansel the box pops up a second time.
    When I try to sign in to the iTunes Store it does not except the password and pops up the sign in box afain,and again endlessly.
    This started happening about two weeks ago.

    if itunes will not run, you probably have mangled windows badly
    one feature of windows 8 is the refresh that saves libraries,
    because you are using windows 7, you will need to backup all files to another storage device

  • I contacted apple on the 28th of october for a repair on my ipod as it is no longer working. On my repair status it says empty box shipped and it should arrive within 2 business days. It is now Friday and the box still hasnt arrived.

    Should i contact apple about this? does the box need to be signed for? do i need to be here when it arrives? how big is the box? and does anybody know how long it will take for the ipod to be returned?

    For my experience i shipped my ipod on a monday, they had it for tuesday and got it back on wendesday but this is because apple put my ipod on express shipping with ups but dont worry about it you should be getting it within this weekend and no you don't have to sign for it, the package is fairly small. If the delivery truck goes by your house and no one is home they will leave a notification on your door saying so and on the paper will be options to eighter make a delivery date where you will be available, or tell them to withhold a package for you at one of thier locations and pick it up. If you choose to pick it up you will require to bring a state id with you that has your current adress. Hope this helps somewhat.

  • How to Setup Service Desk and CHARM in Solu Man 4.0

    Hi Gurus
    I am New to Solution Manager 4.0 and i want to setup Service Desk and Change Request Management for my client. Any one help me to guide where i can start and after configuring how the functionality of service desk and change request management.
    Can anybody send the documents with screen shot how to configure and how it lokks after Configuration.
    My client requirement is he wants to make Service desk as a ticketing tool and Charm as Change management tool
    Please help me
    Piont rewarded for solution
    Rajesh

    Hello
    I have configured Ibase for Charm, i followed spro config info as follows:
    Manually Create and Assign the Component Systems asiBase
    In this IMG activity, you define the Installed Base (iBase) manually, that is for refreshing existing iBases after solutions have been changed.
    An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
    For the Value Added Reseller (VAR), it is not absolutely necessary to manually define the iBase at this point. We recommend, however, that you carry out this step so that you have a functioning test scenario.
    Activities
    1. In transaction Change Installed Base (IB52), choose iBase No. 1 (SOL_MAN_DATA_REP).
    2. Create under the IBase Header (SOL_MAN_DATA_REP) an IBase component, for example the SAP component system (SAP WEB AS) or use an existing one.
    3. To assign the systems as iBase components, go to the Text item tab.
    Three components are included in the standard package.
    4. Add all the satellite systems as text items to the table:
    Column Short text: Description of the system
    Column Identification: System ID, installation number, client
    5. Save.
    After changes have been made to a solution, repeat these steps to update system landscape data for iBase.
    Note:
    Every system is only listed once in the iBases. That means a system is not listed in an iBase if it has been listed in another iBase before.
    If the identification is not entered correctly, the system cannot correctly identify the component from the incoming Service Desk message.
    Its really good and I have set up the config in that way only.
    If useful reward the points.
    Thanks
    Regards
    Sharmishtha

  • Out of the Box alerts and messages.  Necessary?

    Hi,
    I have installed Grid Control and I am monitoring a couple of Hosts and DB's and well, before I even did that I noticed that Grid had a whole bunch of Critical and warning alerts along with Policy Vioalations. Now I assume these are out of the box alerts and messages, cause some of them seems pretty dumb to me. I know we can change them to change the values but I just wanted to make sure if I should really worry about these or not? Are they really serious. Some of them don't make any sense to me and I have been trying to look online at places where I can find out what they mean exactly and how to correct them. Does anyone know how to. These messages are just annoying and I would like to log in to Grid and see no alerts or violations. Here are some examples of what I am talking about. Any advice or help is much appreciated :)
    Examples Alerts:
    -51.55% of all processes are in zombie state, crossed warning (35) or critical (50) thresho...
    -Number of Active Agents exceeded the critical threshold (1). Current value: 0
    **This one seems dumb to me since I only have one agent on the server and the threshold is set to 1!!!!
    -Metrics "Current Open Cursors Count" is at 1673
    -Target is in broken state...
    **This one I would really like to figure out what it means. It is listed under the errors tab.
    Example Policy Violations:
    -Critical Patch Advisories for Oracle Homes
    -Listener Direct Administration
    -Use of Hostname in Listener.ora
    -Oracle Home Executable Files Owner
    Thanks

    -Critical Patch Advisories for Oracle Homes
    Nice but pretty obvious - only need if you have a security policy at your company-Listener Direct Administration
    Dont believe in that one ...-Use of Hostname in Listener.ora
    Same with this ..-Oracle Home Executable Files Owner
    Should be fixed .. a valid problem.

  • The update itunes update software box comes up when I open itunes, I click to download the box disappears and it never starts the download. Whats wrong?

    The update itunes software box comes up when I open itunes, I click to download, the box disappears and it never starts the download. Whats wrong?

    You might not have enough space left on your hardrive.

  • No matter where I click a black box appears and on the left side a black box telling me where my cursor is at the moment. How do I get rid of those black boxes?

    No matter where I click a black box appears and on the left side a black box is telling me where the cursor is at the moment. How do I get rid of it?

     ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off

  • When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still

    When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still persists.  How can I fix it?  thank you.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I redownload itunes, but the problem still persists.  How can I fix this?

    When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still persists.  How can I fix it?  thank you.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • How to create dropwdown list box values and checkbox in screen painter.

    Hi Experts,
    I need to know the creation of dropdown list box values and the checkbox to use in screen painter.
    I have 3 values to insert as:-
    INR,USD,EUR
    if user selects INR/USD/EUR, then it will store into the table field.
    And also want to know the checkbox functioning in screen painter, i.e. what should we write in PBO/PAI.
    I have found some sites to get knowledge, but didnot found anything that relates to my questions.
    So please help me!
    Thanks,
    Deepanshu

    Hi,
    For dropdown list box in Screen create a input field and choose Drop down by index.
    To populate the values write the logic in PBO as follows
    TYPE-POOLS : VRM
    DATA : field_id TYPE VRM_ID ,
                values  TYPE VRM_VALUES,
                 value   LIKE LINE OF values.
    PROCESS BEFORE OUTPUT
    MODULE list_fill_100
    MODULE list_fill_100 OUTPUT
    SELECT f1 f2 f3  FROM tab WHERE condition.
    value-KEY = f1.
    value-TEXT = f2
    APPEND value TO VALUES
    CALL FUNCTION 'VRM_SET_VALUES'
           EXPORTING
                id     = 'i/o screen field'
                values = values.
    ENDMODULE.

  • Finder box jumps and a box blinks asking me to restore windows

    my finder box jumps and a box blinks on and off asking me to restore windows? have you had this problem and what did you do?

    Hello, can you explain in more depth?
    Not sure if this Finder box is a window or what, & restore windows referring to Windows® or finder windows.

  • I backed up my phone and now all of my lock box info and music is gone

    I backed up my phone and now all of my lock box info and music is gone

    To fix this go to Settings>Messages>Send & Receive and do one of the following:
    Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
    Because you are both using the same Apple ID for iMessage. To prevent this, on one of the phones go to Settings>Messages>Send & Receive, tap the Apple ID, sign out, then sign in with a different Apple ID.  Note: you can continue to share an Apple ID for purchasing; it does not need to be the same as the ID you use for iMessage, FaceTime, iCloud and other services.
    Also, to prevent merging your calendars and contacts if you are syncing these to the same iCloud account, be sure to set up separate iCloud accounts on each phone with separated IDs.

  • Service Desk and Change Request Config document

    Hi SolMan Experts,
    Could you please help in getting Service Desk and Change Request Management Configuration document please !!!
    Thanks in advance.
    - Ignacio.

    Hi,
    Please get the stuff from the following sites.
    1. http://help.sap.com/ -> SAP NetWeaver -> SAP Solution Manager
    2. http://service.sap.com/solutionmanager
    3. use tcode SPRO--> search for service desk and follow the steps.
    4. use tcode SPRO--> search for Change Request management and follow the steps
    Regards,
    Srini Nookala

  • Integration SAP Sol Man Service Desk and HP OV Service Desk

    Hi!
    We have installed SAP SM 4.0 and we also use HP OV Service Desk 4.5.And now we want to integrate both this solution.
    As I understand, the interaction is realised wia web interface
    In pdf file "Incident Exchange Service between HP OpenView Service Desk 4.5 and SAP Solution Manager 4.0 Service Desk" I have read what needed interface (or service) is integrated to the HP OV SD. But our administrator of HP OpenView Service
    Desk sad that where no this srvice.
    Are anybody know how to integrate SAP Sol Man Service Desk and HP OV Service Desk?

    Hello - the document is located at http://service.sap.com/solutionmanager - media library - technical papers - Service Desk WebServices API. 
    However, HP is CERTIFIED by SAP to connect to this SOAP interface - the only vendor so far (Remedy and Peregrine are in process.)  HP has tested this interface at SAP and recieved certification several months ago.
    I would have your HP person escalate this issue higher in HP.

Maybe you are looking for