Compatibility issues between CS5.5 & new macs?

Hello all. Does anyone know if there are compatibility issues between Audition CS5.5 and new macs? Just got a 2013 MacBook Pro (OS X 10.9) and haven't been able to install my copy of CS5..5, which I've been using on an older mac for years. I've tried both the original installation disc and a download.
Thanks!
-- Tony

Depends entirely on the application. You should probably visit the
individual product forums for details.
I will tell you this. For InDesign you're not going to be happy at all.
Bob
CBH_admin <mailto:[email protected]>
Monday, January 7, 2013 3:16 PM
>
      Compatibility issues between CS5.5 & CS6.0?
created by CBH_admin <http://forums.adobe.com/people/CBH_admin> in
/Creative Suites Windows/ - View the full discussion
<http://forums.adobe.com/message/4974872#4974872

Similar Messages

  • Data DVD compatability issues between PC and Mac

    I own a macbook g4 12" 1.5ghz and have recently created over 30 data file based dvds using disk utility and dvd-r's speeds 1-16 and 1-8 phillips brand.
    When I put these dvd's in a pc the drives do not recognize the dvd's or anything being in the drive. I have tried these dvd's on 5 different pc's all with either dvd burners or roms.
    When I put the dvd in the mac it recognizes the dvd and the files.
    I found this to happen with 2 other macs in which I have used to burn dvd's (they do not show up when in a pc).
    What can I do to view these data dvd's on any pc?
    Thanks
    macbook   Mac OS X (10.4.6)  

    Try this instead.
    In the Finder select File --> New Burn Folder. Drag your files into this folder and then click the Burn button while its window is open. This should make an ISO 9660 format disk that can be read by both Macs and Windows machines.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.9)  

  • Adobe Flash IDE: Migration/Compatibility issues between Adobe Flash Professional CS3 and CS5

    Hi,
    Adobe Flash IDE: Adobe Flash CS3 Professional and Adobe Flash Professional CS5
    I am facing some  migration/compatibility issues between Adobe Flash CS3 Professional and Adobe  Flash Professional CS5:
    I am working on a project that has  been completely developed in CS3 earlier. When I am using CS5 (Flash Player 9 /  Flash Player 10) to compile the FLA files, it is creating some new issues like  some customized radio buttons are getting disappeared while viewing the SWF on a  web page etc.
    So, I would like to  know:
    1) Is there any  migration/compatibility issue between Adobe Flash CS3 Professional and Adobe  Flash Professional CS5?
    2) If yes: Is there any patch  available from Adobe for it?
    3) If no: What could be the causes  and the best possible solutions for it?
    Any help and support would be highly  appreciated. Many thanks in advance!
    Thanks & Regards
    Amit

    Apparently some people have issues, but I don't think it is across the board.  Here's a link to another recent posting that may or may not prove helpful to you...
    http://forums.adobe.com/thread/776615?tstart=60

  • Compatibility issues with CS5.5 and Maverick 10.9

    I'd like to know if there are any compatibility issues with CS5.5 and Maverick 10.9 before I upgrade from 10.6.8.

    To be honest, I use the CS5 Premium Creative Suite and have had to upgrade all my app's to Mavericks because I have a new iMac, the other one just died.
    I used the 'Time Machine' to backup and to transfer all the files, the Mac apps almost transferred 100% but not all successfully, especially iDVD, it was probably something that I did not click in the 'Time Machine preferences'.
    If I had the choice, upgrade to 'Mountain Lion, I would revert back to Mountain Lion but not got the discs, I find Mavericks very clunky and slow and causing lots of issues with my Adobe applications.
    So if it is not too late, I would wait a few months before upgrading to Mavericks.
    Hope this info' has helped.

  • Compatibility issue between your power management system and Windows 8.1

    I have purchased a new Lenovo Ideapad S410 and have this problem.
           Compatibility issue between your power management system and Windows
           It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
           If you'd like to know more, you can search online later for this error:
    VIDEO DXGKRNL FATAL ERROR
    Please help! My laptop is only 5 days old.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Why can't I use WebCT chat with my computer?  I get the 'spiral of death' every time I try to type in my chat.  I have a feeling it has to do with compatibility issues between Java and Tiger.

    Why can't I use WebCT chat with my computer?  I get the 'spiral of death' every time I try to type in my chat.  I have a feeling it has to do with compatibility issues between Java and Tiger.

    Hi Elizabeth,
    Do your Mac meet any of these requirements?
    http://www.wvnet.edu/services/webct/requirements.html
    From this it appears to be PC only!???
    http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
    Can you provide any more info on which bersion or file you have?
    Can you tell us why you need this for your use?

  • Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1 ?

    Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1

    A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • Compatibility issues using CS5 on Apple Mavericks?

    Are there compatibility issues using CS5 on Apple Mavericks?

    XP is not supported using Boot Camp and Mavericks. http://support.apple.com/kb/HT5634.
    The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/
    The Boot Camp Dixcussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

  • Compatibility issue between your power management system and Windows,

    Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Boot Camp issues in a new Mac Pro 6 core Westmere

    I'm trying to install WinXP SP2 on a drive in bay three of my new Mac Pro (with four internal drives). The boot camp instructions state that a boot camp installation should be done only on a drive in the lowest available numbered bay and that I should remove all the drives in the lower numbered bays in order to do the install. If my OS X system and the boot camp utility are on the hard drive in bay 1 and I'm trying to do an install on a drive in bay 3, this presents a problem. Apple tech support suggested that I swap the drives in bay 1 and 3 prior to the install and then swap them back, which I did. This seemed to work. The startup disk control panel in OS X seems to have no trouble dealing with setting my startup disk to either Mac OS X (in bay 1) or Win XP (in bay 3) after the drives were swapped back. However, I have problems on the windows side. The boot camp control panel in Win XP lets me set Mac OS as the startup disk but I get a permanent black screen at startup requiring me to hold in the power button to shut off the computer and then restart it. Afterwards, I can't start up in OS X unless I hold the option key down at startup and manually pick OS X. I can then reset the startup disk to the OS X in the Mac OS startup disk control panel but this never works from inside XP.
    Two questions that I would greatly appreciate answers for:
    1. Do you need to install windows on a drive in the lowest available numbered hard drive bay in a Mac Pro?
    2. Is the hard drive swap trick I did above confusing the boot camp control panel in XP so that it can't figure how to set Mac OS X (switched back to bay 1) as the startup disk? If the disk swap trick is causing the problem, is there another way to do a boot camp install on a drive that is not in the lowest numbered drive bay?
    Thank you very much!
    Steve

    Support for IE6 is gone. IE9 is coming in beta in Sept. And yes, IE8 can run sites in compatibility mode.
    My feeling is those apps that require an old and buggy browser like 6 should be headed for the trash.
    XP Mode IS XP in hardware virtualization VM. You may want Windows 7 Pro, for XP Mode but also if you have two physical cpus.
    Tech support has been known to give conflicting info on a question, or throw up their hands, and seem really like they need to use Windows first, rather than gain a rep for being clueless and unable to help customers.

  • Has anyone had issues with the new Mac Pro computers and the Adobe Application Manager?

    We just purchased a new Mac Pro and transferred everything from the old computer to the new one.  Now we are getting Adobe Application Manager errors and it wants us to download Application Manager.  That leads us to the Adobe Installer that encounters the following issues
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.  But that doesn't work either.
    Anyone run into this?

    Yep, half of my tracks are coming up displaying an error -69 ( http://docs.info.apple.com/article.html?artnum=302684 ) and every time I remove a track from the shuffle or update the shuffle, Itunes opens a window displaying the contents of J:\ (obviously the ipod) and hidden folder \iPod_Control.... I'm really irked with this. Been mucking around with the stupid thing for hours now.
    Nothing was wrong with it until it suddenly decided to stop working, it wouldn't play tracks and Itunes wouldn't recognise it, hadn't missed a beat up till now. Sifted through the Support site for an answer and getting told I needed to update Itunes and update the Ipod software, ***?? It was working fine before. Me thinks Apple have inserted software in ipod to force users to update to newer version of Itunes. Anyway, ever since updating to the latest Itunes, the Ipod is back in action, but it is trying to tell me that half of my mp3s are corrupt (see error -69), rofl, um no, it's your stupid software Apple, I'm off to by myself a decent MP3 player without the bloat software.

  • Adjustment Layer Issue in CS3 & new Mac Pro

    anyone having the following issue:
    when adding an adjustment layer to a file I get a spinning beachball for 10-30 seconds before the adjustment layer is applied. Strange behaviour never seen before. New Mac Pro Dual Quad 3.2ghz, 10gb Ram, Nvidia Gefore 8800GT.
    S.O.S.
    Thx!

    How did you update to 10.5.3?
    Via Software Update; or from the COMBO?
    [I notice that MacFixit are also now strenuously urging people to stay away from SU and to use the COMBO instead.
    [Pace Stockholm!]
    And did you run DiskWarrior and Repair permissions both before and after you installed the new software?

  • Compatibility issues between R12 and report builder 2.5

    Hi,
    I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
    Thanks
    peopsquik

    As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
    You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Thanks,
    Hussein

  • Lenovo Z50-70 compatibility issue between power management ....

    Hello I got my Lenovo Z50-70 Back in May 2015 and decided to reinstall the OS cause I didn't want the bloatware that came with the computer. I installed the drivers that came with the computer and now I'm getting a power management compatibility issue that I can't seem to find the solution to online. I believe this is part of the problem as to why my computer only charges to 60%.  Some forums have suggested Bios issues but idk how I would go about approaching that issue so if anyone could help me solve this issue, that would be greatly appreciated.  Description
    Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website. The hardware ID of your device is ACPI\VEN_VPC&DEV_2004.Problem signature
    Problem Event Name: PnPDriverNotFound
    Architecture: x64
    Hardware Id: ACPI\VEN_VPC&DEV_2004
    OS Version: 6.3.9600.2.0.0.768.101
    Locale ID: 1033Extra information about the problem
    Bucket ID: a174dfba8fc39d6da507dde9f5dc0925 (-1543083658)  

    hi sreedhar2009,
    Welcome to the Lenovo Forums.
    Just to verify, was the machine running on Windows 7 before and you upgraded to Windows 8 via the upgrade advisor?
      - If this is the case then you will need to uninstall the Lenovo Energy Management for Windows 7 from the Control Panel > Programs and install the Windows 8 versions below (reboot if necessary):
    For Lenovo G580 (2189, 20150):
    Lenovo Energy Management
    Windows 8 32/64bit
    em8.0.2.5.exe
    45.4MB
    For G580 (2689, 20157):
    Lenovo Energy Management
    Windows 8 32/64bit
    em8.0.2.3.exe
    45.4MB
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for