Compatibility issues with iChat Server/clients

I have the iChat server configured and running on my 10.5.1 (Build 9B18) server.
NAT/Ports on the firewall are configured for text/audio/video.
Server has the same FQDN on the outside of the firewall and inside the firewall.
The problem comes up that I have varying client versions in my environment.
An eMac, with 10.4.9 could not add me as a buddy on my 10.5.1 client. Kept getting accept/deny pop-up.
The 10.4.9 client could buddy with a 10.4.10.
10.4.10 could buddy with 10.5.1
My question:
Is this a server authentication problem (Open Directory, Kerbos, etc.)?
I will also be asking this in the iChat AV thread area.

The answer to your problem is very easy: you should change the authentication settings in your jabberd server files.
Here's an Apple support topic on how to do it: http://docs.info.apple.com/article.html?artnum=306749
And here's another topic solving this same problem: http://discussions.apple.com/thread.jspa?messageID=5995966
Hope this helps!

Similar Messages

Compatibility issue with outgoing server; they suggest downloading Thunderbird. Any suggestions?

My internet provider says there is a compatibility issue with outgoing server and suggest downloading Thunderbird. Any comments?

Not without some details from you.
What version of OSX
Who is the mail provider
If not iCloud mail what type is it (POP or Imap)
That's a start.

SQL Server 2008 R2 Standard - Compatibility issues with Windows Server 2012 R2

Hello,
We used as a test a box on which we installed Windows Server 2012 R2 and SQL Server 2008 R2 Standard Edition. No Service pack was installed. It worked perfect.
Now we try to do it on another box and all of the sudden there is compatibility issue when we try to instal SQL Server. We can still install SQL Server by clicking "Continue without getting help".
Where can this come from? If it is hardware related what are the thing I should look at?
Thanks all

Hello,
Adding to Shanky suggestion, you can perform a slipstream installation of SQL Server 2008 R2 + SP3 to make SQL Server
2008 R2 compatible with the newer operating system, as explained on the following post.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
https://support.microsoft.com/en-us/kb/955392/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

A project which specifies SQL Server 2012 as the target platform may experience compatibility issues with Microsoft Azure SQL Database.

Hello
When I try to publis my asp.net application in azure, i have the next error:
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : A project which specifies SQL Server 2012 as the target platform may experience compatibility issues with Microsoft Azure SQL Database.
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : The project and target databases have different collation settings. Deployment errors might occur.

Hello
When I try to publis my asp.net application in azure, i have the next error:
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : A project which specifies SQL Server 2012 as the target platform may experience compatibility issues with Microsoft Azure SQL Database.
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : The project and target databases have different collation settings. Deployment errors might occur.
Hello,
This forum is to discuss vb.net issues, your issue is mainly regarding Azure SQL Database, I found that you have posted another thread in that forum
https://social.msdn.microsoft.com/Forums/azure/en-US/f435921a-14d1-4441-8b2b-32ba3d937aea/a-project-which-specifies-sql-server-2012-as-the-target-platform-may-experience-compatibility-issues?forum=ssdsgetstarted#f435921a-14d1-4441-8b2b-32ba3d937aea.
I would recommend you focus on that thread to get help.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ms SCM has compatibility issue with MS SQL 2008 & 2008 R2

Hi,
I'm trying to install Ms Security Compliance Manager in Windows 8.1 (64-bit machine). During the installation, it gives me the following error message:
This program has compatibility issues
Microsoft SQL Server (2008 & 2008 R2)
Could anyone help me to solve this issue?
Kind regards,
Mohamed Maricar

Hi,
Please refer to the known issues part in the article below:
Microsoft Security Compliance Manager (SCM) - Release Notes
This is a known issue that causes this message to display after installing Microsoft SQL Server 2008 R2 on a computer running either Windows 8 or Windows Server 2012. The workaround to resolve this issue is to click the Run the program without getting
help option on the warning message and then proceed with the SCM 3.0 installation. SCM 3.0 will install on the computer without any impact from the warning message.
Besides, regarding SCM related issue, we'd better seek help in the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=compliancemanagement
Best regards
Michael Shao
TechNet Community Support

Known compatibility issues with 2008 and 2008 R2

For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known
compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. please help me here. i need to get SQL server up and running. thanks

Hi FLORENCEOKOSUN,
According to your description, you encounter a compatibility issue when uninstalling SQL Server 2008. For further analysis, please help to post the full error message and
SQL Server summary log. By default, the log can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
There is also a KB article about known issues of installing SQL Server 2008 on Windows Server 2008 R2 for your reference.
https://support.microsoft.com/en-us/kb/955725
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Are there any compatibility issues with Captivate and OS X Yosemite?

Has anyone noted any compatibility issues with Captivate and Yosemite?

I had the same issue. Updating resolved this as well.
I tested with Captivate 7 and almost everything seemed to work fine. I tested with an existing project file containing TEB's, Motion recording, a third party drag 'n drop widget, and a playbar with a TOC. This all seemed to work fine both in preview mode as after publishing. I also tested with Captivate 6 although I didn't publish anything. Here, everything seemed to work fine as well. However this was only SWF.
As jpm226 described for 8, previewing HTML5 doesn't seem to work with Captivate 6 and 7 either. Chrome gives a "This webpage is not available" notification. Publishing however, does seems to work.
Fortunately, the client we work for that asks us to use Captivate 7, also asks for SWF output. So I'll continue to use Yosemite for now.

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

Sign in issue with Lync Mobile client

Hi guys,
I'm trying to deploy a reverse proxy for mobile and external users, but I am having issues with the mobile client for android. It keeps saying "an unknown error occurred". Please try again.
I've got the log zip file outputted by the client here if someone could have a look and point me in the right direction? I've set
up server farms for the webservices, meet, and dialin.
Desktop clients can log in without any issue btw.
Cheers,
Gareth L. Armstrong

Verify from DNS Configuration and Check what is causing this issue from
Lync Connectivity analyzer
Also to troubleshooting Lync mobility, you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

HT5306 I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? compatibility issues with wh

Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?

Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers and my iTunes wifi sync isn't working. Anyone else having the same problems?

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...

Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Adobe Acrobat 8 Standard compatibility issues with Office 2007 and Windows 7

I just updated my platform to Windows 7 and upgraded from Microsoft Office 2003 to Microsoft Office 2007. The PDF printer did not download and realized that there are compatibility issues with Office 2007. How could I get this fixed?

Buy Acrobat 11.

Compatibility issues with iChat Server/clients

Similar Messages

Maybe you are looking for