Compatibility Mode Error when NOT in compatibility mode

I have a Dell Studio XPS 16 running Windows 7 Ultimate (RTM, not RC). iTunes installs fine but I get this error when I open it:
"iTunes.exe has been set to run in compatibility mode for an older version of Windows. For best results, turn off compatibility mode for iTUnes before you open it."
Once you click OK, the program runs fine. But this still bothers me. Thoughts? Under the application's properties, compatibility mode is NOT selected.

I'm getting the same thing, if you find a solution let me know!

Similar Messages

Issue is with OpenGL. System Info it allows Normal Mode but does not allow Advanced Mode.

Problems with Repousse 3D feature in Photoshop CS5 Extended
I am trying to use the Repousse 3D feature in Photoshop CS5 Extended and have been unable to figure how I can get it to be an option using text. Can you explain how I do this, please?
I have also tried rasterizing the text first and that does not work. I have tried placing the image and them loading the selection and I still do not have the option of Repousse.
I believe the issue is with my OpenGL. In the System Info it allows Normal Mode but does not allow Advanced Mode. I spoke with the "Geek Squad" who advised that this is not an issue with my Mac but has something to do with the software.
Can someone please help me fix this? Thanks.

If you really want help you may have to provide relevant information about your OS, GPU, its VRAM …

Windows 7 Compatibility Mode Error when Compatibility Mode is OFF

I have Windows 7 Ultimate 64 bit on my Dell Studio XPS 16.
When I launch iTunes, I get the "iTunes has been set to run in compatibility mode. For best results, turn Compatibility Mode off" message. The program is NOT set to run in compatibility mode. The program works fine otherwise but I don't understand why I get this error message.
Background: I ran the installer as an administrator and the program is set to run as administrator. I've tried reinstalling twice.
Any ideas?
Thanks.

First head into your Compatibility tab and check to make sure that all the checkboxes are are unchecked. (Having any checkbox whatsoever in there checked can cause a compatibility mode message, including "run as administrator".)
If all your checkboxes are unchecked, and you're still getting the same compatibility mode error, you may have a problem with a rogue registry entry that can hit some folks in their iTunes and/or QuickTime on 64-bit systems. For a discussion on how to get past that (on Windows 7 64 bit), see RandomBehavior's post in the following thread:
http://discussions.apple.com/message.jspa?messageID=10397771#10397771

Nexus 5500 - unexplainable mutual-exclusion error when using "conf sync" mode

We have 2 Nexus 5548UP switches which are running NX-OS 7.0(5)N1(1).
I'm trying to reconfigure an interface, which was previously configured in conf t (local) mode on both switches, in conf sync mode.
Original config:
conf t:
interface Ethernet104/1/33
inherit port-profile DevServers
I've changed the configuration so that the vlan was manually configured and the port-profile was removed from the interface. Otherwise, it was not possible to configure a Port-profile inheritance in conf sync mode (as this was in conflict with the config in local mode).
Current config:
conf t:
interface Ethernet104/1/33
switchport access vlan 13
However, when I try to configure a PP inheritance for this interface in conf sync mode, I'm getting the same error as if there were a conflict:
conf sync:
interface Ethernet104/1/33
inherit port-profile DevServers
commit
Failed: Verify Failed
Status: Verify Failure
Error(s):
Following commands failed mutual-exclusion checks:
interface Ethernet104/1/33
inherit port-profile DevServers
When I configure another interface (not in use) with exactly the same configuration (so access vlan 13 in conft mode on both switches, and then a PP inheritance in conf sync mode), it is accepted and the configuration is correct. It looks like something is stuck within the NX-OS switch which makes it believe that the PP inheritance is still configured in conf t mode...
I've had this issue before on another interface, and found somewhere on the internet that the NX-OS keeps an internal database, which is mysteriously not always in sync with the current running-config, and that this could be forece manually with the command "resync-database" in conf-sync mode. On that other interface, this resolved the issue, but this time, it does not work and I keep getting the above error when I want to configure the port-profile.
Any suggestions?

Ok... I found the source of the problem (looks to be buggy behaviour).
Here's my recent blog post that covers a detailed description and a fix/workaround:
http://nexp.com.ua/technologies/nx-os/troubleshooting-nx-os-config-sync/
Hope this will help anyone.

Ipod not recognized by computer or itunes when not in disk mode

My ipod nano 6th gen. recently has stopped working. I am able to charge it for a short amount of time but have to reset the ipod everytime I go to turn it on. I wanted to update the software but when I plug it into my comp that I have previously updated this ipod on, it says that the device is not recognized. I followed steps on the support page and discovered that the ipod is recognized as a device and as a ipod in disk mode but when I reset the ipod back to normal mode it is once again not recognized. I don't have a problem with my comp or itunes when I connect my iphone or ipod touch so I'm trying to figure out how to get the ipod to work. any suggestions.

I have kind of the same problem with my 60gb ipod with colour display.
everything was working fine up until last sunday when i plugged into my laptop and I got the 'folder with exclamation mark' icon
i reset it and put it into disk mode but when i connect it to my laptop it doesnt turn up on itunes or windows. occasionally it will appear then disappear again so i can't restore it to factory settings.
i did manage to get it to appear in itunes and click on the restore button but i got the message that it couldnt be restored and there was a problem with the 'firmware' but before i could try anything else it disappeard from itunes again.
i have been told that the problem may be with my USB cable so i will buy another one at the weekend but if that doesnt work does anyone else have any ideas as i have tried nearly everything.
i personally think my ipod caught me looking at my friends new 80gb video ipod and got jealous!!!!!
Message was edited by: princesspurplehippy

How to use SNMP to access interface counters for WAN port when not in bridged mode

Hi All,
Can't fault my timecapsule, however just struggling to get one little bit of functionality working. I'm keen to get access to the WAN port interface counter information via SNMP, so I can track total bandwidth/throughput & also volume.
I have no issue getting SNMP to work & can see the 2.4 & 5.0GHz network counters, also total number of WIFI clients, wlan0, wlan1 and bridge0 interfaces. Trouble is none of these are the WAN/external ethernet port.
I see that it is likely that I'm trying to find the vlan1 port, however from what I'm reading this may only be available when the device is running in a routed mode (I'm running in bridge mode).
Anyone able to suggest anything?

Some cable modem you can turn off NAT.. and then use the TC in router mode.. or even use DMZ if the cable router allows that.
Have you ever looked at gargoyle router firmware and its ability to count and quota all clients connecting to internet service.. it is a simply fantastic firmware and can be loaded onto a router that costs $70-130 dollars.. it is 3rd party but very solid if you choose the right combo.
http://www.gargoyle-router.com/wiki/doku.php?id=screenshots

Error when compiling in debug mode

I receive an error when i try to ORA-04021 timeout occurred while waiting to lock object stringstringstringstringstring
Cause: While waiting to lock a library object, a timeout is occurred.
Action: Retry the operation later.

I receive an error when i try to compile a package :
ORA-04021 timeout occurred while waiting to lock object stringstringstringstringstring
....thanks for your help

I keep getting error when in the install mode in shared technology

Getting error when downloading and installing element 11 & premier 11 what can I do ?

See this knowledge base document which has common failures including a section on shared thechnologies
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Checksum error when not displaying [row selector]

Hi !
In my tabular form, I need no row selector, so I unchecked the check box "Show" on the "Report Attributes" page.
But this leads to a checksum-error when updating a record and pressing "Submit".
What's the reason and why does it happen ?
Heinz

Hi Patrick.
No I've not tried it, bit I will try it after Christmas and post the result.
I've realized, that changing a column from "Text field" to "Standard Report Column" or vice versa may lead to checksum errors - but I have no idea how and why a non-database field like the row selector has influence upon the checksum - again some misterious behavior of ApEx tabular forms.
Heinz

Whitecap could not load in 64 bit mode error when opening iTunes. What do I do?

Upgraded to Lion recently. Opened iTunes and got a "Whitecap could not load in 64 bit mode". Tried to sync my iphone a few times but iTunes crashed. Managed to fix the problem by making iTunes run in 32bit mode only. My version of iTunes is 10.4 (80). Something is wrong here though as I thought this version is a 64 bit version.

there's a system library and each user has a library. have you ever installed something and the installer asked you if you wanted to install it for all users? it would put that in the system library. the way you installed this whitecap plugin for itunes as your user, my user can still log onto the same machine and not be affected by it. why did they hide the user's library folder? i guess they felt you wouldn't need to go in there and mess things up on accident. the other way to get to these "hidden" folders is by going to finder and clicking the Go menu then Go To Folder (Shift + Command + G). it's even tab completable, which is nice =)

OWB10GR2 - Error when try to use 'MOD' function in an Expression

Hi
I'm trying to use the MOD function in an expression, e.g. mod(44,12), however, when I validate I get the error:-
Line 2, Col 18:
PLS-00201: identifier 'MOD' must be declared
Line 0, Col 1:
PL/SQL: Statement ignored
Has anyone else come across this problem, and can anyone please suggest a solution?
Thanks
GB

Not yet, thanks for the suggestion.
If you use MOD in an expression or Constant, the expression does not validate but the mapping itself does validate, deploy and runs ok. So
This issue has been reported as a bug therefore for the time being we can just ignore the expression validation message.

URGENT..error when trying to access mod plsql link on intial 9ias server page

Can anyone provide me with a solution to my problem?
When I finished my installation of 8.1.7.1(patchset)DB, then 9ias 2.1
I try to access the mod plsql link to access the server gateway. However the following error appears.
'You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)'
I've found out it might be due to the SSOHash java class not executing. As a result I ran an sql statement that showed i'm missing login server data. Tried a fix but didn't work.
Does anyone know what I can do apart from a re-installation?
thanks

Did you run ssodatan in order to setup the wwsec_enabler_config_info table?
Eric

XP Mode error when loading

i just built the comp, virtual pc , says it finished, and then i load xp mode, it gets almost to the end, and i get a red bar, says it did not install and to retasrt the install, this is win 7 pro, i have not activated it yet as there are video issues
i am dealing with, but does this ever load right and actually work? asus M5afx99 pro, fx 6300, 8 gb ram, 1tb sshd.
thanks you for the help

Hi Terry,
Thank you for your update.
I fully understand the inconvenience you have encountered.
To find the root cause, please check the Application logs under Windows logs in Event view.
You may also check the file located C:\Windows\Logs\CBS\CBS.log and open it in notepad to see if any error is recorded.
please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Application logs and the CBS logs to a public folder and share their URLs with us.I will be glad to assist you to analysis the data.
You may follow the steps from the link below to uninstall XP Mode, virtual machines, or Windows Virtual PC.
Remove Windows XP Mode, virtual machines, or Windows Virtual PC
http://technet.microsoft.com/en-us/library/ee431673(v=ws.10).aspx
Regarding install and setup xp mode, I would like to suggest you refer to the link below to setup XP mode:
Set up Windows XP Mode
http://technet.microsoft.com/en-us/library/ee449430%28v=ws.10%29.aspx
Windows Virtual PC and Windows XP Mode Setup and Installation Guide
http://technet.microsoft.com/en-us/library/ee681616(v=WS.10).aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

TS4284 iMac won't start ... Disk0s2: I/O error when starting in safe mode

My iMac started lagging badly with a color wheels spinning round and round, so I rebooted and now it won't startup at all.
All I get is a white/grey screen with the Apple logo and a spinning wheel, but no joy in starting up.
I managed to start in safe mode, but it stopped at the following:
disk0s2: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 1544944] [LBlkNum 3758] [FSLogMsgId 1702152349] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode root_device] [MountPt /] [FSLogMsgId 1702152349] [FSLogMsgOrder Last]
Don't understand a word of this, but would appreciate any guidance as to what to do? Is it time to take it in to the Apple Store or do I just dump the machine and get a new one?
I wonder if this is not caused by any updates? Would that be possible?

FunkyJazzMuso wrote:
Could the drive be taken out and accessed via a ISB cable so I can at least rescue my iPhone and iPad info?
Without any problem. Just extract the hard drive, buy an enclosure to put the hard drive and connect it to your new computer after setting it up, so you will be able to transfer all your data onto the new Mac. You can find some enclosures in OWC > http://eshop.macsales.com/shop/hard-drives/External-Enclosures/

RFC lookup error when table in change mode

Hi,
I´m using an RFC lookup from XI to translate external to internal partner nr. Input to the FM in R/3 is the external partner nr och the FM should return the internal partner nr to XI. The problem is that when a user edits the table that my FM reads from a get an error.
- Isn´t it possible to read a r/3 table while it is in change mode? Is my only way around this to create a z version of this table?
Claes

Hi Claes
have a look on these links ,
For your RFC lookup,
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
RFC lookups pdf https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/xi%20mapping%20lookups%20rfc%20api.pdf
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Michal's Blog on RFC Mapping Lookup:/people/michal.krawczyk2/blog/2005/09/15/xi-rfc-mapping-lookups-from-bc-to-xi
RFC Lookup.
RFC lookup return no values
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/d609b48ea5f748b47c0f32be265935/frameset.htm
Also check this useful link which also talk about Value Lookup:
Value lookup
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
Lookups - /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Lookups - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Thanks !!

Compatibility Mode Error when NOT in compatibility mode

Similar Messages

Maybe you are looking for