Compatibility mode message comes up when launching itunes

Hi All,
When I launch the new itunes (downloaded today) I get a message "itunes.exe has been set to run in compatibility mode for an older version of windows . For best results turn off compatibility mode for itunes before you open it." After I click ok itunes lauches without problems. My question is what do I need to do?
Thanks,
Brad
Dell Windows XP

You should be able to resolve this with the information on the following link.
http://discussions.apple.com/thread.jspa?messageID=3705522&#3705522

Similar Messages

What action can I take to eliminate the following error message when launching iTunes?

Since the iTunes upgrade last week I persistently get the following message when launching iTunes. "You are signed in with a different Apple ID than previously used with Podcasts. Do you want to sync these podcast subscriptions and stations with ------------ "
I only have one Apple ID of which I am aware. I changed the password just before the update, after receiving an email advising access from a device that I did not recognise.
The error message goes on to refer to a Windows XP, desktop system as the previous platform for this synchronisation. I have been relying upon the old MacBook Pro since March, when iTunes on the Desktop crashed. I gave up trying reinstallation etc. on the desktop as nothing appeared to resolve the problem. I have "uninstalled" the application in Windows but lack the necessary skills to remove all traces. I still get error messages about iTunes when opening Windows XP but there is no evidence of application elements on the Hard Drive / System that I am able to recognise.
iTunes appears to lack a process for updating to recognise that the current platform should be the default.

Try signing out of iTunes, then back in again. This worked for me and a few others. To sign out, in the iTunes menu bar, click "Store" > "Sign Out".

I'm trying to make a purchase at itunes, but when I finish asking the card data to the message comes into contact support itunes appears, can you help me?

I'm trying to make a purchase at itunes, but when I finish asking the card data to the message comes into contact support itunes appears, can you help me?

Do exactly what it told you to do.
Contact itunes support

TS1372 a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

The linked article
http://support.apple.com/kb/TS1372
has some suggestions. Did you try doing those things?

When launching iTunes match in Austria or is Germany better than we????

When launching iTunes match in Austria or is Germany better than we????

Sorry, we're all apple users here too. None of us that I know of work for apple. We are just all apple users that try to help each other out.
I would say as soon as Apple possible can they will launch it in your country. Might have to do with goverment regulations or music licenses in your country.
Apple wants to take as much of your money as you'll give them so I'm sure they are working hard to give you the chance.

Whenever I open itunes in my ipad a message comes "cannot connect to iTunes Store"...help to get it right please

Whenever I open itunes in my ipad a message comes "cannot connect to iTunes Store"...help to get it right please, I have the new I pad and I was able to connect to iTunes before,and I use 3 g network..there is no network problem for sure because I could use safari and App Store perfectly...

Make sure cellular data is turned on..I checked and it was on
Tap Settings > General > Cellular
Switch Enable 3G to off then back on.
Same for Wi Fi. Tap Settings > Wi-Fi. Switch off then back on.'
Then restart the device.
edited by: cs

"An error occured during operation" this message comes up when I try to print from the internet

This message comes up when I try to print from the internet...."An error occured during operation" I have to screen print if I want to print anything from internet. Can anyone help with this.
Bob

Hello,
I see that you're having an issue with the printer.
Are you having an issue printing from any other program besides the internet?

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

The Deskjet series printers connect to wireless networks with what is called USB to Wireless.
You will need a supported operating system to connect a Deskjet to a wireless network. Supported operating systems to connect the printer to a wireless network are Windows 7 (32bit and 64bit), Windows Vista (32bit and 64bit), and Mac OS X (10.5, 10.6, and 10.7).
While there is a software download option for Linux distributions, this is not the full featured software that is capable of adding the printer to a wireless network. Most printers have a wireless setup wizard to accomplish this task, but the Deskjet series printers connect in a different way.
Once the printer is connected to a wireless network, HPLIP 3.12.4 drivers should be able to locate the printer.
Click on Installing the Product Software for a Wireless Network Connection to receive instructions to connect to a wireless network using Windows and Mac operating systems.
Click on Software & Driver Downloads - HP Deskjet 3070A e-All-in-One Printer - B611a to download the appropriate software for a supported operating system to connect to a wireless network.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Help! My iPhone 4 can not be switched on as it went off while updating. The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!

The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Can't boot up the 640 G1 Laptop. ME Unlock is forbidden in Production Mode message comes up

Can't boot up the 640 G1 Laptop. "ME Unlock is forbidden in Production Mode" message comes up

Hi ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details)
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George

Warning message when launching iTunes

I upgraded to iTunes8 and on launching iTunes, the following error message appears "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of other CD burning software. Please reinstall iTunes." I then reinstalled the "Repair" from the downloaded file (iTunes8Setup), but the warning message still appears after rebooting my computer and launching iTunes . I then removed iTunes from my computer and reinstalled iTunes from this download (iTunes8Setup). I rebooted my computer and launched iTunes, same result. Any ideas on how I can fix this warning message. Please note this warning message did not appear when launching my previous version of iTunes.

I do not burn any CD's so don't have one to insert into the drive to test the diagnostics. No I am not running 64 bit version of XP.
See below results from rinning the diagnostics.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
ACER Aspire E500
iTunes 8.0.0.35
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.0.25
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number D1F09C78CC** <Edited by Moderator>
Current user is an administrator.
The current local date and time is 2008-09-29 21:28:09.
iTunes is not running in safe mode.
Video Display Information
ATI RADEON XPRESS 200 Series
SAPPHIRE RADEON X300SE
RADEON X550
SAPPHIRE RADEON X300SE - Secondary
RADEON X550 Secondary
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {EFAF9826-1BC6-4217-A75F-70968D938047}
Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:03 1970
Lease Expires: Thu Jan 01 04:00:03 1970
DNS Servers:
Adapter Name: {31029B03-6743-4E35-B15F-555C4A5A585E}
Description: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:03 1970
Lease Expires: Thu Jan 01 04:00:03 1970
DNS Servers:
Adapter Name: {1A454B26-0287-4327-8BBC-7F3E9B4D5B16}
Description: WAN (PPP/SLIP) Interface
IP Address: 86.97.62.8
Subnet Mask: 255.255.255.255
Default Gateway: 86.97.62.8
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:00 1970
Lease Expires: Thu Jan 01 04:00:00 1970
DNS Servers: 213.42.20.20
213.42.20.20
195.229.241.222
Active Connection: ADSL USB MODEM DIAL-UP
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-09-28 06:05:23.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: NTIDrvr (1.0.0.6),
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.0.35 is currently running.
iTunesHelper 8.0.0.35 is currently running.
Apple Mobile Device service 2.10.31.0 is currently running.
Universal Serial Bus Controllers:
ALi PCI to USB Open Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number: JQ608FRWTXL
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Get error message when launching iTunes

Hi I have a problem with iTunes it's probaly my own fault but i hope someone in here know what i possibnly could do. I succesfully installed iTunes and used it for about two hours, then the electricity shut down in the house while iTunes was running. When i tried to start my PC again and launched iTunes i got an error message from windows, askin me if I wanted to send them a report of the problem.
i tried to uninstall iTunes and install it again, didnt work. I tried to clean my computer as good as icould clean registry run scan disc and so on, and then install it again no help didnt work.
Do you know what i possibly could do?
:: Kasper Sørensen

let's keep pushing our luck with the Windows troubleshooting techniques ... so far this is proceeding just like a standard PC troubleshoot ...
okay, that's the result that suggests that you've got a problem with the itunes preferences files in your usual XP User Account. there's a different set of preference files in each XP user account, which is why we can get this "crash in one account, launch in another" behavior.
if you've got damaged preference files, we can usually get past this by rebuilding the preference files in the usual account.
quit itunes. log out of the new account and back into the usual account.
find and delete the following two files:
C:\Documents and Settings\<username>\Application Data\Apple Computer\iTunes\iTunes.pref
and
C:\Documents and Settings\<username>\Local Settings\Application Data\Apple Computer\iTunes\iTunes.pref
(“<username>” here will be the name of the account you’re having difficulties with.)
You might have to turn on "show hidden files" to find them. (Right click "my computer", select open, select Tools menu -> Folder Options. Select View tab, "show hidden files" radio button is in the center scrolling panel.) these will be rebuilt the next time you try to launch itunes in your usual user account.
(the itunes setup assistant will run, you'll be asked to agree to the license again, and so forth.)
after the setup assistant has finished, does itunes finish launching without the crash?

When i connect touch to mac running os 10.4 it wont update the software even though the update button is availible, when i press the update the message comes back saying that itunes is up to date even though it was the button for update touch software to

When the ipod is ct isonnected to the mac itunes gives the message that there is an update to the os availible, when i click on update the message comes back that i tunes is up to date even though it was the update os button that was pressed, it is doing the same with my iphone, does anyone know where the conflic

The lates iTunes (10.5) requires Mac OS 10.5.8 or higher. You appear to be running 10.4.X. You will need to upgrade your Mac OS.
Stedman

Error message (-41110) when launching Itunes

rene.haller
Feb 24, 2013 4:30 AM
I have just downloaded the latest version of Itunes (or rather the latest update). And now I get an error message when i lauch Itunes: -(41110).
However, it does not prevent me from actually using Itunes. It's just an error box that appears when Itunes is launched. Any idea?
Windows 7
I have this question too (11)
Reply
Categories: Installing, Removing and Upgrading
Re: Error message (-41110) when launching ItunesFeb 24, 2013 4:10 PM (in response to rene.haller)
Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s: iTunes: Advanced iTunes Store troubleshootin
I have the question above, bwecause of this annoying problem and the aswear they cave does not solve my problem, the answer is not clear in what to do.....

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Compatibility mode message comes up when launching itunes

Similar Messages

Maybe you are looking for