Compatibility of graphics driver for vista with xp

I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista:  NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
This question was solved.
View Solution.

luit wrote:
I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
OK.
Now that is new information that you should have shared earlier with us.
You need to use all of the drivers that are available at the ECS website for the  ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Satellite A60-156: Where to find graphic driver for Vista

    I've recently upgraded my A60 with new dvd, memory and hard drive.
    Upgraded to Vista and all works perfect except i cannot find an upgrade for my display driver.
    Just shows as standard graphics adaptor and i cannot get any 3d functionality on it even for Vista Windows games or screensavers.
    Can anyone advise as to where I can get updated drivers for this function? Graphics card is ati radeon 7000igp.
    Thanks.

    What to say It seems Toshiba page doesnt provide any Vista drivers for this unit.
    So you could try to use an graphic driver from the 3rd party website like www.omegadrivers.net
    But note; these are not Toshiba drivers and therefore the drivers are not tested on the Toshiba notebooks. You can install it but only at your own risk.
    Best regards & good luck

  • Graphics Driver for HP Pavilion dv6t-6000 CTO Quad Edition Entertainment Notebook PC for Win 8.1

    Hello Everyone,
    I currently have an HP Pavilion dv6t-6000 Quad Edition with intel i7 and switchable radeon HD graphics card . I have made the jump from Windows 7 to 8.1 as I am a Current University student studying Information technology and have the need to be updated in terms of technology. I found Win 8.1 to run a bit faster on my PC than Win 7. I have ran into a couple of problems when upgrading to 8.1.
    1.) I've been having an issue finding the correct and stable Video Graphics driver for my Radeon HD 6770M switchable graphics. I tried intalling the original Win 7 driver in the HP driver but does not work properly. I have also tried download a generic driver from the AMD Radeon driver website, but the screen is extremly dim when intalled and is almost impossible to use unless I hold a lamp to the LCD screen. The brightness function keys DO get reconized when pressed, but the brighness will not change no matter how high or low the brightness threshold is at.
    2.) It is a bit out of topic, but I have also been having alot of trouble getting the validity fingerprint sensor to work with Win 8.1.
    I would really appreciate if anyone can help me with these issues or point me in the right direction in order to get them fixed. I am an IT student and have done alot of reasearch on these topics but have been unable to get them to work as intented.
    P.S: I have read alot of fixes about brightness using regedit and edditing some values on specific registry entries. I have found them for many other pc manufacturers, but not for HP. Not an expert on registry stuff, but seems like many people get it fixed by doing so. Just an idea.

    Due to the age of this model, HP is only providing drivers for Windows 7. After searching through the HP Forum, I was unable to find a satisfactory solution to your issue.
    Please contact official HP Customer Support in your region / country, via the HP Worldwide Support Portal, for official assistance with your issue.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Partitioning an External 320gb drive for use with Time Machine and...

    I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
    Is this possible?
    I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
    Has anyone done this before?
    Cheers-

    Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
    See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

  • Still no working driver for Vista

    Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
    For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
    Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

    Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
    I've since reactivated UAC, but not driver signing since several drivers are unsigned.
    But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
    All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
    All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
    There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
    Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
    Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
    I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
    So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

  • Driver for 1220C with Windows 7

    I have a HP Pavilion g7 with windows 7 64-bit.  My printer is a Deskjet 1220C.  When it prints, it only prints pink.  It does not print blue, yellow oe anything else.  With a brand new toner cartridge in it.  What do I do?

    Hi,
    Based on the following link, no driver available
       http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=se&prodNameId=19142&pr...
    You may have to use driver for Vista as mentioned in this:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 8 graphics driver for macbook pro

    Which graphics driver for my macbook pro early 2011 for bootcamp windows 8 pro do I use?  Does it switch between AMD 7400 and Intel graphics 3000?  Is there a way to make it switch or will it be automatic?
    I have had problems where screen scrambles or turns blue with narrowly spaced vertical white lines.  I generally just reboot my system and the problem goes away for awhile.  This problem has not occured with OSX Mountain Lion, only happens with Windows 8.
    What is the recommended solution?  Surely Mountain Lion Boot Camp should have appropriate graphics driver support for Windows 8 by now!

    As Windows can't switch graphic cards of your Mac, Windows only uses the AMD graphic card. From what you say, it may be a driver issue, so I recommend you to download the most recent driver from the AMD website > http://support.amd.com/us/gpudownload/Pages/index.aspx
    Apart from that, as you said, Windows 8 Boot Camp drivers aren't ready yet, so you may have these type of problems until Apple releases those updated drivers

  • Need HD graphics driver for my Satellite C660

    Can anyone help with a HD graphic driver that works with AutoCAD 14 and above. I have the latest Toshiba driver for my laptop and the Intel and AutoCAD site just refer back to manufacture web sites.
    C660 i3 64bit 8GB ram windows 7 Intel HD graphic version8.15.10.2189
    Screen locks up when Acad loads.
    Regards,
    John

    Originally Posted by Chad
    Hi
    Usually the latest Intel HD graphics driver could be downloaded directly from Intel driver website.
    The Intel driver depends on the Intel CPU.
    So I’m wondering what Satellite C660-xxx do you have exactly and what CPU has been installed in the notebook.
    Could you provide such details?
    I tried the INTEL web site update service, but they see the graphic driver as a customised item (TOSHIBA) and so their driver will not work and refer back to the manufacturer.
    Info requested below;
    TOSHIBA SATELLITE C660-1LD
    PART No. PSC0QE-03M00CEN
    Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz
    8GB RAM
    64 bit operating system
    Windows 7 Home Premium
    Intel (R) HD graphics driver version 8.15.10.2189
    Any help much appreciated,
    Regards,
    John

  • How to scan my computer and external hard drives for pictures with out importing duplicates.

    how do i scan my computer and external hard drives for pictures with out importing duplicates.

    iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

  • Cannot Install Graphics Driver for windows 7 64 bit...

    Hi... I cannot find a suitable amd driver setup file for my windows 7 64 bit machine of HP.. Can anyone help??!!

    Hi:
    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Cannot-Install-Graphics-Driver-for-windows-7...

  • Need to download printer driver for 3510 with windows 10

    I need to download printer driver for 3510 with Windows 10

    Here is the link to the Deskjet 3510 drivers.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Tecra S10-106 - 3G driver for Vista Ultimate 64bit

    Hello,
    I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
    Thanks in advance.

    Hi
    To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
    That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
    Hope that helps.
    Regards
    Phil

  • T530 windows 8.1 Intel graphics driver for Widi

    A new graphics driver appears to be required when running Widi on the T530 after an upgrade to Windows 8.1.   Intel provides a generic version 15.33.5.64.3316, but this will not load on the T530.   It fails because it wants me to load a version from Lenovo.   Lenovo does not appear to have released a new graphics driver for the Intel 4000 graphics processor yet.   When will that be available?
    Barry
    Solved!
    Go to Solution.

    You need to uninstall the existing intel driver using programs and features in control panel. After restarting, the generic driver should be able to install using the installer. I wouldn't force install via device manger as when I did that it left components of the old driver around and caused system hanging.

  • 32 bit hd graphics driver for windows 7 model-15-d006TU

    plz plz
    32 bit hd graphics driver for windows 7 model-15-d006TU

    Hi:
    You should be able to use all of the W7 32 bit drivers except the audio from the HP Probook 450 G0.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p...
    For the audio, accept the agreement, download and install the first file on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

  • Nvidia GeoForce Go 7600 graphics driver and IQ770 with Windows Vista Home Premium 32 bit edition

    I have been having problems with my screen for several months now:  every so often, for no apparent reason, it loses some of the pixels.  I can still read the items on the screen, but the resolution is trashed.  It happens intermittently and then goes back to normal.  I have tried uninstalling the graphics driver and letting the computer go find it on a reboot.  This does not work.  I have also tried installing the original graphics driver.  This does not work either.
    If I look in the "Problem Reports" area in Control Panel, there is a graphics related error: 
    Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078)  The resolution listed is to reinstall the device driver (which I've tried dozens of times without success) or to change the computer's performance settings, which also does nothing.  I still get the occasional loss of screen clarity which returns to normal all by itself.
    Is anyone else seeing this problem?  Does anyone have a resolution?
    I have tried the latest graphics driver available on the hp website, from 8-2008 as well as the originally installed version from January 2007.  The version of Windows is Vista Home Premium 32 bit edition, Service Pack 1.
    If I completely uninstall the graphics driver, and do not reload any, the screen performance is fine, but then there are other problems, such as graphics acceleration.
    Thanks for your help.

    For the IQ700 series
    If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
    http://support.microsoft.com/kb/975163/ 
    If you're running Windows 7, install this patch
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
    And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

Maybe you are looking for