Compatibility of Mac OSX 10.4 with 10.7.4
Hi there,
I bought this cambridge advanced learner's dictionary Third edition that's compatible to both Windows and Mac OSX10.4. But my DVD -Rom just not accepting. Its simply ejecting after a couple of minutes. Same happened with my Windows operating system as well. My Mac operating system is 10.7.4. What I need to know is
1. why is my DVD rom not reading the CD?
2.Is the software compatible to Mac Osx 10.4 also compatible wit 10.7.4?
3. How must I solve the issue?
4. Can you tell me where can I find the dictionary that's compatible with my operating system that's Mac 10.7.4?
Thank you
So I would try resetting your SMC on you mac running 10.4 http://support.apple.com/kb/HT3964 You may also need to clean out the optical drive with pressured air. If those 2 things don't work, then you might want to have the optical drive looked at. As far as the software being compatible with 10.4 and 10.7, most likely it's going to be a power pc app and not going to be compatible with 10.7 but you can always try loading the software.
Similar Messages
-
Is my JVC Everio GZ-HM330 Camcorder compatable to Mac OSx and if so where can I download the software please?
chrisfrommarion wrote:
Thanks, while it worked on yours it doesn't work on mine, any other ideas?
Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
And how long did you hold it down?
I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit? -
Mac osx 10.6 with sbs server 2003
Hi everyone
i m using mac osx 10.6 on my imac . i want to connect it with sbs server 2003 , then i want to to make a map drive on it .I m trying it to cmd+k to connect with server but it not connecting , i m wondring do i need to configure any thing else to connect with windows server .
cheersHi John,
thanks for your advice, I have actually been using the two links you provided,
yet they both lack support for the home user, and all suggest that the users have a static ip address, but this is sadly not the case.
has anyone used . http://www.dyndns.com/about/home_solutions.html
Does anyone use this service at home for their server and which settings did they use ?
This would at least let me think Im working along the right lines.
Im getting stuck with the Primary DNS questions along the setup route from apple setup. : (
thanks again
Yaddle. -
Mac OSx Full Drivers with Printer Options
Hi,
Is there a way to deploy full drivers with iPrint. The PPD driver deployment works well, but it lacks any of the printer functions that is needed by the clients. The printer is a Xerox WorkCenter 7845 (Color, HolePunch, Stapling. . . )
The PPD driver only does grey scale printing and none of the other features work. I would love to do the following with iprint:
1. Set printer options.
2. Deploy the full Mac OSx Driver package of Xerox for this printer.
Hope there is a reply out there.
Thanks.Originally Posted by odegos
Hi,
Is there a way to deploy full drivers with iPrint. The PPD driver deployment works well, but it lacks any of the printer functions that is needed by the clients. The printer is a Xerox WorkCenter 7845 (Color, HolePunch, Stapling. . . )
The PPD driver only does grey scale printing and none of the other features work. I would love to do the following with iprint:
1. Set printer options.
You can edit the ppd file to set the options.
Originally Posted by odegos
2. Deploy the full Mac OSx Driver package of Xerox for this printer.
Would like to know this to.
Originally Posted by odegos
Hope there is a reply out there.
Thanks. -
Instructions for Rebuilding Mac OSX 10.7 with Bootcamp?
Hi Folks!
I'm new to the Mac OSX world (well, relatively) so please bare with me as I ask what may seem a very elementary question....
I would like to completely rebuild my iMac, and include Bootcamp (yes, I want the option at boot-up time; not VMWare) so I can run Windows 7. Is there a document, or website, that would provide these instructions? From booting up from the OSX CD, creating the various partitions, installing Bootcamp, followed by intalling Windows 7?
Thanks in advance for any, and all assistance!!!
Cheers!
RichardIt is very simple. Boot from your original install DVD and run Disk utility. Wipe the complete drive by either erase or partition. Then install OS X. Once that is done run Boot Camp and create a partition for Win 7. Download the support files from Apple for Win 7 and have the Win 7 DVD handy. Insert 7 DVD and install. Once the install of 7 completes (or during the install of 7) load the Apple drivers.
If you want multiple partitions for Mac or Win 7 I'm not sure you can do that and still install 7 or after and have everything still work.
Or you could just buy a lower cost Win 7 PC and place it next to your Mac. -
Mac osx kernel panic with nomachine
Symptom : Was frequently getting kernel panic on MacBook Pro 9.1 after any mac osx 10.8 (mountain lion) software upgrade.
Root Cause : NoMachine softare installed on Mac
How to Fix : Start Mac Book Pro in Safe Mode (Hold Down Shift while starting, until a grey bar appears)
Once booted in Safe mode, remove from "NoMachine" from Applications folder
Other third party drivers can cause similar problems.
Diagnosis Steps:
1. Start in Safe Mode
2. Get the panic log - /Library/Logs/DiagnosticReports
3. Will have error like
0xffffff80fbf7bfb0 : 0xffffff800becf473
Kernel Extensions in backtrace:
com.apple.iokit.IOPCIFamily(2.8)[6C1D646D-7E5E-3D7F-A557-2CBA398FF878]@0xffffff 7f8c475000->0xffffff7f8c49dfff
com.nomachine.driver.nxusb.io(4.0)[99876DC0-AF55-30D5-AF55-DD53791C05A2]@0xffffff7f8e1f4000->0xffffff7f8e210f ffUninstalling NoMachine altogether is not required. It is enough to disable the USB driver as explained here:
https://www.nomachine.com/AR10K00733 -
Install MAC OSX 10.5 with 10.4
Hi there all,
I have a 933mhz G4 Mac book and I want to experiment with OSX 10.5. I currenlty have 10.4 installed. As I have just above the min spec's for 10.5, I want to preserve my instillation of 10.4.11. Can I dual boot 10.4 and 10.5? If I make a second partition on the HDD, could I install 10.5 on it and on booting choose which version of OSX to boot into?
JamesIf I make a second partition on the HDD, could I install 10.5 on it and on booting choose which version of OSX to boot into?
Yes. Of course making such a partition will erase the entire disk, so you will have to back everything up first and then reinstall Tiger as well as installing Leopard: that done you can choose which to set up as your startup disk, and you can hold option while booting to bring up a screen to choose the other partition. Or you could get a firewire external disk drive and install Leopard on that. -
Powershot ELPH 135 compatibility wi/ Mac OSX 10.6.8
I have a 3 year old Mac Book with OSX 10.6.8. Just got a nifty new Powershot ELPH 135 and Mac doesn't recognize it. Old Powershot worked fine, USB cord is good, batteries charged, etc. Is there a free softward download, can't seem to find one.
Hi reneea!
Thanks for posting.
Did you download the [Digital Camera Software 3.0] from our website? If not, please download that and install it. Click HERE to go to the download page.
Do you have any devices connected to your Mac other than your camera?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I'm getting this on two different machines running different OSX versions with different graphics cards:
Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.
My computers are:
iMAC / OS X 10.9.5 / AMD Radeon HD 6970M 2048 MB
MacBook Pro / OS X 10.10 / AMD Radeon HD 6750M 1024MB
Was in a chat with an Adobe tech person and they even remotely got on my computer and changed permissions on two Adobe folders and sub folders and it still didn't work. Adobe Premiere CC seems to work. But clients are all using CC 2004.Hi ufoclub,
Try this:
Go to the following locations:
Location 1: When in Finder, click on Go > Go to Folder > ~/Library/Application Support/Adobe
Location 2: Go > Go to Folder > ~/Library/Preferences/Adobe
Location 3: Documents > Adobe
In all the locations, rename the 'Adobe' folders to 'OldAdobe'
Launch Premiere, accept the License Agreement and see if it works.
Note: You will lose your customized workspaces and keyboard shortcuts.
Thanks,
Rameez -
Does Mac "OSX Lion" come with "iCloud"?
I am unsure if the new Mac "OS X Lion" comes with the new "iCloud" i hope so but i'm not sure it hasn't said it does or does not on this site
Even if it is free, there is no guarantee it will remain so. Still, it sure looks free to me. Plus, Dropbox security has me worried. I was never interested in MobileMe, even when it was free. I am definitely interested in iCloud, even if it isn't.
-
trying to update 2 ipods but when I go through the process it says "The ipod software update server could not be contacted" "Network connection could not be established". One of the ipods is locked and I don't remember password.
Here's what you can do in case of the forgotten password:
Connect in recovery mode and restore, you'll get the option to rest the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Check this post for the network problem:
https://discussions.apple.com/message/17855328?ac_cid=142432#17855328 -
Mac OSX Tiger Authentication with Active Directory
I'm at my wits end and need some help. We have a Windows network, that we joined a designers new Mac to. When he, or an administrator logs into the network from the Mac, when they try to access network shares, (GO-->Connect to Server) they get permission denied.
Any Ideas??
ThanksHi Daniel,
you can use the User Management Engine (UME) to do that. Just map your AD to UME (its done via xml-mapping file and pretty simple, although I dont have an example at hand).
You can then use the UME-API to check user Roles and Groups or access their attributes.
regards
Jan -
Printer compatibility for Mac OSX
Can my Apple Max osx 10.9.2 (Maverick) operate an Epson Printer
Epson WorkForce WF-2510WF Multifunction Inkjet PrinterVisit and/or contact Epson tech support & check out the following KB Articles:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system -
Mac OSX Server Problem with authorizations
Bonjour,
J'ai des problèmes avec mon serveur sur Lion 10.7.3 avec mes postes aussi sur 10.7.3.
Un souci récurrent de problèmes d'autorisations en écriture.
Si je crée un dossier sur un poste je ne peux pas l'utiliser sur un autre
Problème apparemment connu
A l'aide...Hi Cartoon Boy, and a warm welcome to the forums!
If it's server you're doing, some directions hear won't work, might even mess things up on Tiger Server, I'd try reposting in one of these...
http://discussions.apple.com/category.jspa?categoryID=238 -
Adobe Reader 9 and Mac OSX 10.5 - FDF Issue
I have an issue that only happens when using Adobe Reader 9 and Mac OSX 10.5.
When submitting a form from within a PDF, the FDF that gets sent is completely blank.
Tested on Mac OSX 10.4 with Adobe Reader 9 - no issue
Tested on Mac OSX 10.5 with Adobe Reader 8 - no issue
Tested on Mac OSC 10.5 with Adobe Professional 8 - no issue
It only seems to be a combination of OSX 10.5 and Reader 9. Does anyone have any clue about the settings of these two and what might be happening?
Any help is greatly appreciated.Mac OS 10.4.11: I could not open pdf docs today (12-24-08), uninstalled & installed Adobe Reader 9.0.0. pdf docs icons changed but open, however cannot open Reader from Applications and get: Adobe Reader
Version 9.0.0
Installing/fixing installation
Then immediately get this error message:
Adobe Reader could not install correctly.
Adobe Reader was unable to install a necessary component
and must quit.
Any help out there for me?
Thanks, Tony
Maybe you are looking for
-
What is the best way to partitioning Macbook Air 13" 2012 solid state drive
What is the best way to partitioning Macbook Air 13" 2012 solid state drive.
-
How can i retrieve or install my lost wi-fi address?
How can i bring back or retrieve,,,or re install my lost wi-fi address?my iphone4 setting?
-
Can't find Photoshop CS6 in Aperture
I installed Photoshop upgrade to CS6 and I am using Aperture 3.4.3 with a Mac Computer. I don't want to export to Photoshop I want to send to Photoshop so the photo wil go back to Aperture. I used to be able to do this before I upgraded. Edit with Ex
-
Hi Gurus, we use an AS2 adapter from seeburger and now there are some messages (in seeburger adapter monitor) in status "Waiting for delivery-, receipt- or both reports". Which is probably, that message has been sent successfully, just we haven't rec
-
Problems colour correcting multicam in angle editor
Hope someone can help: I'm trying to colour correct one of the multicam clips in the angle editor. When I click colour match and hover over the other clip part of this multi cam clip nothing happens and the 'apply match' button remains greyed out. I