Compatibility of Solaris WBEM servises and SBLIM wbemcli utility

There is a strange situation, when Solaris wbem server is running on port *:5988, access to CIM server are granted for users, firewall is disabled, however there is no possibility to connect solaris CIM server from linux hosts using wbemcli.
So the question is: Is there a compatibility between Solaris WBEM realization and SBLIM realization?

From what I have read Sun Cluster 3.2 will not be supported with RAC 11g R2 untill September time frame.
The functionality will be released via a cluster core patch.
Currently Sun Cluster is looking down in /etc/init.d/init.crs to start CRS (11g R1). With 11g R2 the start script for GRID is now /etc/init.d/ohasd.
SC does support HA 11g R2, but not RAC at this point in time.

Similar Messages

Font compatibility with Office (for Mac and Windows)

Hi,
Despite extensive searching, I'm struggling with a font compatibility issue between my Mac and my colleagues' PCs. The main points in order:
The fonts work correctly on both my Mac and other PCs.
The font in question is HelveticaNeueLT Std, rolled up into which are several different weights. The files are OTF files. The same files install without any problems on all the computers in question (and show up in Font Book). And the font can be used successfully:
- in Keynote, I select Helvetica Neue LT Std, and underneath choose whichever weight I want
- on PCs, the font and weight can be selected from the drop-down list in MS Office.
- in Office for Mac 2016 (Preview), I cannot select the font from the drop-down list, but can hit Cmd+T, and then select the appropriate font and weight under 'Latin text font'. What is odd is that in the dropdown list, only a particular weight/typeface is shown:
As this is a preview version, I wouldn't expect Office to work perfectly just yet...
When a file is created on a PC, it works fine on my Mac.
Every file I have attempted to open that was created on a PC, and using these fonts, works fine. The fonts display correctly (i.e. including the correct weights), and I can work with the document without any problems. The only odd bit: sometimes in the dropdown box on my Mac it then says (null):
Whereas at other times, the font name shows correctly:
Both of those examples were created using the 'Thin' weight of HelveticaNeueLt Std. I can't see any pattern as to what causes this inconstency.
The problem is that what I create on my Mac shows incorrectly on a PC.
If I create anything using Office 2016 or Keynote, selecting the preferred weight as described above, it shows just fine on my Mac. But when I send the PPTX file to a PC, all weights look identical (it looks as though the PC has just displayed everything in a standard weight). This is the problem I am trying to solve.
To try to get around this, I tried the process of removing the Helvetica/Helvetica Neue .dfont files that come with the Mac - but this didn't work and caused several other problems. Besides, the font I'm trying to get to use as intended has a different name.
All help would be greatly appreciated - my thanks in advance.
John

Thanks Kappy and apologies if it is inappropriate - but just to clarify, my main question is whether fonts used in Keynote should be compatible with other software (in this case Office running on Windows). The Office for Mac Preview is a bit of a red herring but I thought it should be mentioned.
I tried to clarify my first post, but it didn't work. What I wanted to add was simply whether Keynote handles fonts in a way that other pieces of software struggle to read - despite the font itself working perfectly in both environments.

Solaris 8 x86 and 10 x86 differences

I have a device driver that works on Solaris 8 x86. I installed this same device driver on a box with Solaris 10 x86. Under Solaris 10 x86 I get a message "WARNING: minor name <tec
_0> is not compatible network driver name <tec>". Also, opening the device under Solaris 10 x86 will cause the OS to quit responding. Where can I find a list of differences between Solaris 8 x86 and Solaris 10 x86?
Thanks.
David

Another way to install Matrox G550 is to Install AcceleratedX from www.xig.com
It supports a lot of graphic card and it also supports hardware acceleration for OpenGL
BUt obviously its not free :(

Solaris 8, 9 and 10 Security Files

Good Morning:
I am hoping that someone out there can confirm the following scenario:
I want to use a standardized set of security files for all my operating systems Solaris 8, 9, and 10. The files from Solaris 10 and are listed below:
/etc/default/passwd
/etc/default/login
/etc/security/policy.conf
The questions I have are as follows:
1. With the understanding that some of the security features may not work in Solaris 8 or Solaris 9, is there a problem in using these files across the all Operating systems?
2. Are there any known issues with this approach?
Mark K.

Lars,
Use ldmp2v to convert existing physical server to VM and
Convert Solaris 8 and 9 physical servers to container in Solaris 10 VM?
Is that what you are saying?
Major constraint I have is, applications running in the current physical servers have no vendor support, vendor doesn't exist any more. Application has been locked to run only on the same OS version. What I am worried is, while running ldmp2v should not prevent the application coming up in the new virtualized environment. Keeping that in mind, I gave a thought like
1. Install and configure the CDOM (control domain)
2. configure and Install LDOMs with Solaris 10 OS
3. Run flar on the existing Solaris 10 physical server
4. Transfer the flar created to Solaris 10 LDOM and configure it as a zone
5. For Solaris 8 and 9, create LDOMs with Solaris 10 OS
6. Install additional patches and packages needed for supporting Solaris 8 and 9 zones
6. create flar images on the existing Solaris 8 and 9 physical servers
7. transfer the images to newly created LDOM and configure the zone.
8. Current servers sun4u which has to be converted to sun4v.

Solaris 8, 9, and 10 zones in logical domains

We are planning to migrate our current environment to T5-2.
Current application environment is running with Solaris 8, 9 and 10 OS versions in V8* series and M5000.
Our plan is to install multiple logical domains in T5-2 with Solaris 10 or 11 and migrate the current running Solaris 8, 9 and 10 servers as zones. Plan is to create the flash using flar and restore in the target T5-2.
Will there be any issue with the said OS versions on migration?
Please suggest.

Lars,
Use ldmp2v to convert existing physical server to VM and
Convert Solaris 8 and 9 physical servers to container in Solaris 10 VM?
Is that what you are saying?
Major constraint I have is, applications running in the current physical servers have no vendor support, vendor doesn't exist any more. Application has been locked to run only on the same OS version. What I am worried is, while running ldmp2v should not prevent the application coming up in the new virtualized environment. Keeping that in mind, I gave a thought like
1. Install and configure the CDOM (control domain)
2. configure and Install LDOMs with Solaris 10 OS
3. Run flar on the existing Solaris 10 physical server
4. Transfer the flar created to Solaris 10 LDOM and configure it as a zone
5. For Solaris 8 and 9, create LDOMs with Solaris 10 OS
6. Install additional patches and packages needed for supporting Solaris 8 and 9 zones
6. create flar images on the existing Solaris 8 and 9 physical servers
7. transfer the images to newly created LDOM and configure the zone.
8. Current servers sun4u which has to be converted to sun4v.

Solaris Management Console and X86 Disk

Greetings,
I am trying to use the Solaris Management Console to manage the 2 disks I have in my Intel PC. Both disk are allocated 100% to Solaris 10 and were formatted and partitioned by the installation program.
Why is it that when I use the Management Console it tells me that there is no Solaris FDISK partition and that I cannot manage the disk until I put a Solaris FDISK partition on them? It doesn't seem like the tool is all that useful if it cannot use the default format put on the disk by the install program.
On related note, why is it that auto layout during install creates partitions that are barely large enough to hold the OS? From what I can see it puts the bulk of the disk space into home for user home directories but this creates a problem when trying to install additional SW such as StarOffice.
Cheers
TC

Thanks for your help. I updated my root password from 4 charcters to 4charcters + 4 numerals , still SMC will not let me in. I updated 2 machines and both allow me to login as root (GUI) but SMC wants to confirm the password and will not let me in.
I have reinstalled (initialized rather than upgrade) Solaris 10 on one machine (Ultra60) , that machine now works fine. It allows me to login as root(GUI) ans the SMC accepts my root password
The machines are an Ultra10 and an Ultra60.
I choose to upgrade rather than a new install because of to much info to rebuild.
Brian

Compatibility Matrix for Reader X and Acrobat?

I've scoured adobe.com and can't find a compatibility matrix for Reader X and different versions of Acrobat. Does someone have a link?

Indeed they're not - we haven't got an updated version yet, but the rules are effectively the same as for 9:
Acrobat X can coexist with Adobe Reader 5 through X
Acrobat X cannot safely coexist with another version of Acrobat, nor can Acrobat Pro and Acrobat Standard safely coexist*
Acrobat X and Reader X both contain an option under Preferences to choose which is the default PDF handler.
*On Windows you cannot install Acrobat X without uninstalling all previous copies of Acrobat. On OS X you can force the install to run, but you're destined to see strange effects.

Compatibility OK between Air TV and TV PANASONIC TX-L55DT60E LED 3D : is it OK before I Buy ? Thanks.

Hi, I would verify the compatibility between the Air TV and the Panasonic TX-L55DT60E LED 3D ?
Is it OK before I buy ?
Thanks for your answer,
Jacques

It has HDMI so should be just fine, be sure to turn off any silly motion settings the TV offers.

I have recently started a solaris. I have a solaris using 64x and 86x systems and have java. The machine is very active and is very quick. I am happy so far with its performance and think its worthwhile to continue with my projects. That's all I have to s

I have recently started a solaris. I have a solaris using 64x and 86x systems and have java. The machine is very active and is very quick. I am happy so far with its performance and think its worthwhile to continue with my projects. That's all I have to say.
John Lupton

I have recently started a solaris. I have a solaris using 64x and 86x systems and have java. The machine is very active and is very quick. I am happy so far with its performance and think its worthwhile to continue with my projects. That's all I have to say.
John Lupton

Solaris 8.x and 9.x (archive) ISO Request

Solaris 8.x and 9.x (archive) ISO Request
Hello, can someone please upload or let me know who I can talk to about getting x86 ISO's for Solaris 8.x and 9.x.
I had previously downloaded them legally for free from Sun and had them in my Sun Connection profile for ages. Now they are gone and I need to get them to do patch testing and troubleshooting for the fleet of 8.x boxed I have to work on now. They run on hardware thats too weak for the Solaris 10.x branch.

Here is link to download Solaris 9: http://www.sun.com/software/solaris/9/
but for Solaris 8 as i read is EOL and is not offered for download

Solaris 8 hangs and data access error on reboot

Hi
using solaris 5.8 on UltraSPARC-IIi 360MHz.
I know it is an old hardware but similiar hardware is running fine. here is the issue,
System booted : works okay for some time then display was hung so system was rebooted ..it gave data access error. again rebooted and it came up fine..
I have pasted the /var/adm/messages here..
http://pastebin.com/m5d2d1d53
Is it a CPU problem or Hard disk or memory issue ? or something else ?
what could be solution , a kernel patch is an option ?
uname -a
SunOS sparc5 5.8 Generic_108528-07 sun4u sparc SUNW,Ultra-5_10
test-all at OBP did not show any error.. passed all.
Thanks

I cant see the /var/adm/messages output, Since you have already performed a Full Diagnostic check, then you boot your solaris using CD and then perform full FSCK on root File Systems and see any errors get reported. Keep doing fsck 2 -3 times untill all the errors are clean.
Also you must check the latest patches available for this system architecture.

Solaris 8 (Intel) and Voodoo Banshee

Hi all,
I need install the Solaris 8 operation system in a INTeL machine and it has this kind of video card. Please, there is a driver for this video card?
I downloaded the Solari's HCL and I could not see this card in the Capatibility List. If someone have some way to do this, please send me a email or the driver.
Thanks in advance,
Marcelo Muzilli ([email protected])

Hi,
Not sure about Windows 95.
But yes, I have done dual boot with Windows 98 and Solaris 8.
I installed Solaris 8 first, used only 50% of disk for Solaris and then installed Windows 98.
May be somebody else in forum can share their experience with Win95.
Thanks
Kalpesh

Cross compiling apps on solaris 8 for solaris 10 x86 and x64

Hi All,
We have a few applications built on Solaris 8. and we want to build the same apps on Solaris 10 x86 and x64 but the problem is clearcase does not support Solaris 10 yet.
Can we cross compile the apps on Solaris 8 for Solaris 10 x86 and x64 ? and how ?
waiting for any info on this.
TIA,
warm regards,
Girish

FYI, I noticed the reply on Sun Studio General Forum:
If you build an app on one version of Solaris, the app will run on later Solaris versions. So in particular, you can build an x86 application on Solaris 8 and run it on Solaris 9 and 10.
Unfortunately, an x64 application must be built on a Solaris x64 system, which first became available with Solaris 10.

Bind 9 DNS Server chroot cannot work on Solaris 10 u6 and u7

My Old verion "Solaris 10 x86 Generic_Patch_118844-30" can be run "Bind 9 DNS Server" in chroot mode.
And this is no any problem.
I have been try to use "Bind 9 DNS Server" in Solairs 10 x86 u6 or u7.
The result is not any problem.
But when I turn it run in the chroot mode. the "Bind 9 DNS Server" cannot run.
I have been manuelly run the named:-
/usr/sbin/named -c /etc/named.conf -t /chroot/dns -u named -f -g
The respond is :-
13-May-2009 02:17:46.623 starting BIND 9.3.6-P1 -c /etc/named.conf -t /chroot/dns -u named -f -g
13-May-2009 02:17:46.624 found 1 CPU, using 1 worker thread
13-May-2009 02:17:46.627 socket.c:3259: unexpected error:
13-May-2009 02:17:46.627 open(/dev/poll) failed: No such file or directory
13-May-2009 02:17:46.628 ./main.c:495: unexpected error:
13-May-2009 02:17:46.628 isc_socketmgr_create() failed: file not found
13-May-2009 02:17:46.629 create_managers() failed: unexpected error
13-May-2009 02:17:46.629 exiting (due to early fatal error)
Look like the bind 9 runing in the chroot mode after that cannot find /dev/poll
Even I use Bind 9 version 9.6.0, the result is same.
So, I don't sure the problem are the Bind 9 or Solaris 10 u6/u7
I try to continous install New verion Bind 9 in my old version Solaris 10.
THE Result is NO ANY PROBLEM in old version Solaris 10.
And I already bypass the SMF problem.
Anyone can tell me what the problem in solaris 10 u6/u7?

Looks like something reported similar bug:
[BIND fails to start|http://bugs.opensolaris.org/view_bug.do%3Bjsessionid=376e1152f0ddc75829ed1725542e?bug_id=6799867]
but I am somewhat puzzled why there is no follow up on the bug fixing.
Ok, I found the source (may be?):
From named:
http://src.opensolaris.org/source/xref/sfw/usr/src/cmd/bind/bind-9.3.6-P1/bin/named/main.c
    462 static isc_result_t
    463 create_managers(void) {
    464      isc_result_t result;
    465      unsigned int socks;
    466
    467 #ifdef ISC_PLATFORM_USETHREADS
    468      if (ns_g_cpus == 0)
    469           ns_g_cpus = ns_g_cpus_detected;
    470      isc_log_write(ns_g_lctx, NS_LOGCATEGORY_GENERAL, NS_LOGMODULE_SERVER,
    471                 ISC_LOG_INFO, "found %u CPU%s, using %u worker thread%s",
    472                 ns_g_cpus_detected, ns_g_cpus_detected == 1 ? "" : "s",
    473                 ns_g_cpus, ns_g_cpus == 1 ? "" : "s");
    474 #else
    475      ns_g_cpus = 1;
    476 #endif
    477      result = isc_taskmgr_create(ns_g_mctx, ns_g_cpus, 0, &ns_g_taskmgr);
    478      if (result != ISC_R_SUCCESS) {
    479           UNEXPECTED_ERROR(__FILE__, __LINE__,
    480                      "isc_taskmgr_create() failed: %s",
    481                      isc_result_totext(result));
    482           return (ISC_R_UNEXPECTED);
    483      }
    484
    485      result = isc_timermgr_create(ns_g_mctx, &ns_g_timermgr);
    486      if (result != ISC_R_SUCCESS) {
    487           UNEXPECTED_ERROR(__FILE__, __LINE__,
    488                      "isc_timermgr_create() failed: %s",
    489                      isc_result_totext(result));
    490           return (ISC_R_UNEXPECTED);
    491      }
    492
    493      result = isc_socketmgr_create2(ns_g_mctx, &ns_g_socketmgr, maxsocks);===========================> here. (notice the error message and the actual function called are not the same).
    494      if (result != ISC_R_SUCCESS) {
    495           UNEXPECTED_ERROR(__FILE__, __LINE__,
    496                      "isc_socketmgr_create() failed: %s",
    497                      isc_result_totext(result));
    498           return (ISC_R_UNEXPECTED);
    499      }
    500      result = isc_socketmgr_getmaxsockets(ns_g_socketmgr, &socks);
    501      if (result == ISC_R_SUCCESS) {
    502           isc_log_write(ns_g_lctx, NS_LOGCATEGORY_GENERAL,
    503                      NS_LOGMODULE_SERVER,
    504                      ISC_LOG_INFO, "using up to %u sockets", socks);
    505      }
    506
    507      result = isc_entropy_create(ns_g_mctx, &ns_g_entropy);
    508      if (result != ISC_R_SUCCESS) {
    509           UNEXPECTED_ERROR(__FILE__, __LINE__,
    510                      "isc_entropy_create() failed: %s",
    511                      isc_result_totext(result));
    512           return (ISC_R_UNEXPECTED);
    513      }
    514
    515      result = isc_hash_create(ns_g_mctx, ns_g_entropy, DNS_NAME_MAXWIRE);
    516      if (result != ISC_R_SUCCESS) {
    517           UNEXPECTED_ERROR(__FILE__, __LINE__,
    518                      "isc_hash_create() failed: %s",
    519                      isc_result_totext(result));
    520           return (ISC_R_UNEXPECTED);
    521      }
    522
    523      return (ISC_R_SUCCESS);
    524 }And in isc_socketmgr_create2():
   3384 isc_result_t
   3385 isc_socketmgr_create2(isc_mem_t *mctx, isc_socketmgr_t **managerp,
   3386                 unsigned int maxsocks)
   3387 {
<SNIP>
   3488
   3489      /*
   3490       * Set up initial state for the select loop
   3491       */
   3492      result = setup_watcher(mctx, manager);===============================>will call open() on /dev/poll.
   3493      if (result != ISC_R_SUCCESS)
   3494           goto cleanup;
   3495      memset(manager->fdstate, 0, manager->maxsocks * sizeof(int));
Other the above, I cannot really understand or help further. But I know it should fail in somewhere in setup_watcher() in socket.c.

Solaris 10 Sparc and Oracle 11g DB with GG

Hi,
I have Solaris system with Solaris 10 Sparc and Oracle 11g DB.
From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10.
I tried to Install but I am getting the following error..
$ ldd ggsci
ldd: ggsci: ELF machine type: EM_AMD64: is incompatible with system
Can you please let us know which might be the best golden gate software for us.

Vinod wrote:
I have Solaris system with Solaris 10 Sparc and Oracle 11g DB.
From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10.
I tried to Install but I am getting the following error..
$ ldd ggsci
ldd: ggsci: ELF machine type: EM_AMD64: is incompatible with system
Can you please let us know which might be the best golden gate software for us.Possibly the solaris x86_64 build was downloaded, instead of the build for solaris sparc? (I think all of our current solaris builds are 64-bit.) It's almost certainly a download / OS mismatch.
What exact file did you download (what's the file name, before unzipping it), and on your solaris box, what's the result of => "uname -a" and/or "isainfo -v" ...? Just make sure the downloaded file matches what the box is running...
Btw, not that it matters in this case, but if you were hypothetically running a 32-bit database on a 64-bit OS, you'd need a 32-bit build of GoldenGate. But I don't know why you'd do that. (And that's not the problem here.)

Compatibility of Solaris WBEM servises and SBLIM wbemcli utility

Similar Messages

Maybe you are looking for