"Compatibility of the navigation of the People Centric CRM with EP6"
Hello all,
for which version of Business Package and which SP Portal 6.0. is SAP-Reference note: 659881 "Compatibility of the navigation of the People Centric CRM with EP6" valid.
We brought the note for portal 6.2.0.4 (BP 60.2.3) and
navigation functioned not.
Does anyone know this problem and can help me?
Thanks in advance
Best regards
Hello Irene,
Go ahead and do as per the instructions given in the note. Download the zip file and proceed as instructed. Everything works fine. This note is applicable to the SAP Enterprise Portal 6.0 and any level of the support package.
Hope this helps..
Thanks,
Sunitha
Similar Messages
-
Implementing People-Centric UI with BSP and SAP EP Cookbook
Here's the URL to access "Implementing People-Centric UI with BSP and SAP EP Cookbook."
https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000583719&
--KALHello KAL,
I think that you have more access rights to Service Market Place. I as a Customer Employee only see a link to the People-Centric CRM - SAP Help Portal and a Overview Presentation People-Centric CRM. Are you at a SAP Partner?
Regards
Gregor -
When I send a email, the people get it with my daughters email as the one who sent it. I have checked all the settings ...help
Does your daughters email address show up as one of the options in the From line as discussed above? If so, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
-
Creating Alerts in Area People Centric CRM
Hi,
I need to create and display Alerts in the portal in Area People Centric CRM.
My role is that of a Servicemanager and a Salesmanager.
Could you please let me know how to do this?
Thanks and regards,
MoitreyeeHi Gregor,
Thank you for your reply.
Could you please let me know about any documentation available where the steps to create alerts is mentioned clearly?
Thanks and best regards,
Moitreyee -
Hello Guys..
What is People Centric CRM ?
How it is related with My SAP CRM ?
What is the Importance of People Centric CRM in My SAP CRM ?
regards
vamshiIts a web based user interface that can be used for front end users as was said previously. Using this allows users to not have to log in directly to a SAP GUI to use the system, all they would need is a browser to access it. There is actually a room here on SDN just below the general & framework room. It's here: [SAP CRM: People Centric UI (Read Only Archive);
In many cases now, the IC Webclient can take the place of the PCUI, especially depending on the version of CRM you are using. -
Define Layout of the People-Centric UI (Customizing Tool)
Hi All,
I m woking on CRM 5.0 I want to create a new layout in people centric UI. Let me describe u: I want to add a new field in my BP.Lets say SSN NO. can anybody tells me wheather I can do in STATIC MODEL OR DYNAMIC MODEL. What is the diff b/w this two.
Another tihng if anybody can guide me how to do in complete step thayt will be appriciate. If possible can u send me to my mail id [email protected] that will be best.
let me give u the complete path IMG>define layout of PCUI>>COMM_BUPAR>>VERSION 0>>static model.. search area>>field group>>BUP_BUS1006_SEARCH_04>>field group variant>> default>>BUP_SEARCH_LOG_04-->>partner. Here I want to add a new field SSN NO and that will reflect on BP screen.
100%points will be rewarded.
Thanks in advance
ChinmayaHi Chinmaya,
You have to first check whether your field to be added is available in the structure assigned to that Field group. In this case structure COMT_BSP_BP_SEAREQ_BUS1006. You can check this in SE11.
If available then you have to add that particular field in SPRO transaction for Field Group structure (Application Element-> Field Group -> Field group structure. In your case for Field Group BUP_BUS1006_SEARCH_04. Specify your View, sequence and other field details while doing so.
Then generate the field group in SPRO ( Application Element-> Field Group -> Layout generation) for your view.
Then you can view the field in PCUI.
If the field is not available in structure then it is a complex process.
Regards,
J.Prabananth
Please award points if the answer is useful. -
Special Features in the People-Centric UI
Hi experts,
I found the following text in help.sap.com
" You can send a selected contact person an e-mail or a fax. An activity, which can be displayed on the tab pages Activities and Interaction History, is created in the background for this transaction. Using the hyperlink you can navigate to the relevant transaction in the application Activities, where the texts of the e-mail as well as attachments to the e-mail are stored."
Can someone guid me to implement this feature? I want see the E-Mails in interaction history.
Thanks for help.
AlexHi,
you should try the following:
1. Check your transaction customizing - in the standard system there is the transaction type 0003 - outgoing mail and 0004 - incoming mail.... - check if these transaction types are active...
2. Go to customizing - Main functions - and choose one-to-one e-mail - enter the transaction types.
3. go to the activity application and choose the button - e-mail... now you can write a new e-mail...
4. to use the incoming e-mail functionality you should read the help of the one-to-one e-mail customizing, because there is a realy simple way to work with e-mail integration with outlook! You can also use the transaction CRM_EMAIL_OUTLOOK in the gui...
regards
marc -
Error while configuring the People Soft adapter with ESB
Hi All,
We are intergarting PeopleSoft application using ESB ver 10.1.3.1
I have been following the Oracle Application Server Adapter for People Soft User's Guide.
The following are the steps covered.
1. Basic installation of the SOA Suite done (On the windows machine)
2.Packaged application adapters installed.
3. Post installation tasks carried out
a Installed Patch 5895585
b Library files copied(psjoa.jar from the target peoplesoft application server)
c.BSE deployment verification done.
d we would be using the file repository for BSE
Then I created a configuration for BSE (creating a new configuration )
And then I can see all the 3 nodes -Adapters,Events and Business Services.
But when I click on the adapters node I do not see any adapters and I get the following error:
"This application has failed to start because iwsiebel.core.dll was not found.Re-installing the application may fix this problem"
I have done the installation again but still getting the same error.
I checked and the above dll is present at the following location :
<Oracle_Home>\adapters\application\lib
<Oracle_Home>\j2ee\<oc4j_container>\connectors\jca-app-adapter\jca-app-adapter
Any pointers or suggestion on how I can overcome or resolve this issue..??
Thanks & Regards,
ShilpaHi All,
Any pointers or direction to resolve this issue would really be helpful... ?
Thanks &Regards,
Shilpa -
Why CRM ? I am not getting the purpose of CRM ? Help on this ?
Hi All
I am looking forward to learn CRM (Present i am working on Netweaver)
Even i have seen some docs but i am not getting the main purpose of the CRM
Can any one help me to get the basic details of CRM?
Like
Why CRM? Where it will be used ? what it contains?
How the data will be maintained etc....
Adv thanx and points to all
regards
PrasadHi Prasad,
There are three UI in CRM
Interaction center -- Web client, Winclient
Mobile Client Application
PCUI
Pls proceed.
Interaction center:
I have told u already
Mobile Client Functions
Integration of the Mobile Client Calendar with Microsoft Outlook or Lotus Notes
This function allows you to integrate the mobile client calendar with groupware. such as, Microsoft Outlook and Lotus Notes.
Inbox
This function allows you to view e-mails, rejections, and notifications that you receive on your mobile client
Infocenter
This function allows you to view your SAP Enterprise Portal Infocenter content in an offline capability
This guarantees fast access to information at a specific time, thereby accelerating the execution of your business processes.
Chart Overview
This function enables visual depiction of data in a predefined way, using graphics. These business graphics are represented as charts
Reports
This function allows you to generate reports in a predefined format.
Cross-Component Functions
This function encompasses a set of functions, such as creating attachments and notes that are common across business components in a mobile client application.
People centric user interface : ( PCUI )
The People-Centric User Interface (People-Centric UI) is an intuitive Web-based user interface that helps you perform your daily tasks quickly and simply.
With the help of predefined roles , the People-Centric UI gives you central access at all times to the data and information you require for your daily work.
The People-Centric UI meets end user requirements and makes it possible to:
Navigate easily through complex applications
Get access to information quickly
Reduce processing time to a minimum
I would like to appreciate u by rewarding the points.
Thanks and Regards,
Maniprabu -
People-centric/enterprise portal
Hiya Guru's
Got a problem .I have customised my webclient but cannot execute the people-centric UI.I am currently using a 4.0 server (IDES) and the institution cannot help because they claim that they do don have any access.can any one suggest ways on how i could get access to people- centric.? Does 5.2 server have the access to people-centric UI? if so, can you suggest any provider who can give me access at a fee?Hi
This does not seem to be a VC related question. Please can you try and post this on another forum.
Jarrod Williams -
Customer Prospect in People Centric UI
Hi together,
can somebody explain to me, how to create an iView to create customer prospect in Portal?
I found two OSS-notes where I found the information, that I have to copy the BSP and to add my own view on to the customer (ie. OSS-note 712481).
In the iView "account", of the crm business package, there is called the BSP bsp_frame. In Customizing of the application CRMM_ACCOUNT (which is also defined in the iView) there is the package CRM_BSP_MODEL_IL_BP assigned. In this package I only found only the BSP-Application "crm_prn_acc_ov" - but I think this is not the account BSP.
Have anybody an idea, which BSP-Application I have to copy? Where I'll give in the new iView the information for the new BSP-Application? Which steps I have to do in customizing?
Thanks and regards
ThomasFrom OSS-Note 712481:
<i>In the SAP GUI, business partner roles (BP roles) represent different views for a business partner.
This function is implemented in a different way in the People-Centric UI.
SAP delivers the "Account" and "Competitor" People-Centric UI applications with CRM Release 3.1 and CRM Release 4.0 - two views for the business partner. The "Contact person" application represents a special view for the contact person relationship of a business partner.</i>
I'm working with CRM 4.0 and Portal-Application. The proplem is, that I wan't to create(!) business partners in the role prospect (BUP002) and additional in role general (00000). SAP delivers only two iViews one to create business partners in role "sold-to" (CRM001) and one to create competitors (CRM005) (see OSS-Note).
Regards, Thomas
Message was edited by:
Thomas Blasche -
There is no sound in one of the earphones I received with my iPhone. My iPhone is still under warranty, so can I just go to the genius bar and get replacement earphones?
You may wish to make an appointment first. Otherwise, you may face a long wait
due to the extra business being generated with all the people getting
help with their newly acquired holiday gifts. -
RFC is to be created in ECC that should fetch the data from CRM
Hi Gurus,
I am facing with a problem in knowing the fields and table to develop an RFC in ABAP.
My exact requirement is :
ABAP : the field PERNR is passed as exporting parameter to RFC and imporitng paramter is an internal table that consists of PERNR and overpayment status field.
ABAP CRM
Exporting Parameter = PERNR Importing Parameter= ? " Which field should i take as importing field"
Importing Parameter = LT_ITAB Exporting Parameter= ? " internal table consisting input field and
overpayment status field "
NOTE : In order to provide a means of progressing overpayments and to provide a statistical analysis of overpayments, RFC is required that combines the information in CRM with that in ECC6 for overpayment details.
Pls Can u Help me by providing table and field name in CRM
Thanks,
Reddy..Hi Kalpana,
if you want to fetch ecc data to crm you have to create one rfc enabled function module in ecc use that function module in crm.
calling a smart form is different scenario go through this links you can get to know how to call..
**************** - Calling an RFC function module from one system to another
Print an Adobe Form from CRM Web UI - CRM - SCN Wiki
Call a Smartform in webUi
example:
sample code:
clear lv_client.
IF sy-mandt = '110'.
CONCATENATE 'ECDCLNT' sy-mandt INTO lv_client.
ELSEIF sy-mandt = '200'.
CONCATENATE 'ECQCLNT' sy-mandt INTO lv_client.
ELSEIF sy-mandt = '300'.
CONCATENATE 'ECPCLNT' sy-mandt INTO lv_client.
endif.
call function 'zfunction_module' destination lv_client
exporting
is_date = lv_date
tables
ot_tab = ot_tab.
Thanks & Regards,
Srinivask -
I am able to forward emails forwarded to me on my hp but if I forward them from my iPhone or iPad the people I send them to are unable to read them
Certainly there has not been any noticeable increase on the forums of people reporting problems with Verizon.net email. I think the Verizon tech may have been passing the buck.
Delete the account and start over. Here are the instructions:
https://www22.verizon.com/ForYourHome/VZRepair/vziha/Service.aspx?ihaweb=EmailSe tup -
Show the custom popup window on clicking the people name in sharepoint people search result
Show the custom popup window on clicking the people name in sharepoint people search result
We are doing the below code to open a popup but while clicking on name link its postback the page and not opening the popup in first click but opening in second click.The same issue occurs while navigate to second page using pagination
The below code used to show name in item template
<button id="NameFieldLink" class="temp" style="font-size: 12px;text-decoration:none;color:#0072c6;border:0px solid #fff;background:transparent;margin-left: 1px;height: 15px;padding: 0 10px 17px 0px;text-align: left;cursor:pointer;font-family:
Arial, Helvetica, sans-serif;" title="">_#= DisName =#_</button>
The below jquery code used to open popup in control search template
ctx.OnPostRender = [];
ctx.OnPostRender.push(function () {
$(".temp").on("click", function(event)
event.preventDefault();
$('#fadeout').show();
$('#pop1').find('.tab-content-people').html($(this).closest('.emp-card').find('.pop-content').html());
$('#pop1').show();
return false;I believe the issue is that you are not actually searching against the result source you made in step #1.
It's not enough to make a result source, you have to tell the search results web part to use it.
Try this:
1. Go to the Pages library of Search Center
2. Create a new Search Results page
3. Edit the page, then edit the search results web part
4. Change the source for the search results web part to your source
5. Add the page to your Search Center navigation
6. Run the search on that page
Scot
Author,
Microsoft SharePoint 2013 App Development
Author,
Professional Business Connectivity Services
Author,
Inside SharePoint 2013
Blog, www.shillier.com
Twitter, @ScotHillier
SharePoint Trainer, Critical Path Training
Maybe you are looking for
-
Hi Experts, I am getting below error in the sender file adapter: errors: u201Coffset[249(read Segment : IEA)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!u201Derrors: I have used replace string parameter but of no use I
-
I want to buy the NFL Game Pass package to view this season on my iPad 2 which I bought and registered in the U.S. I now live outside the U.S. but a message in the app store says I cannot download the app from the U.S. store. By the way the product c
-
Webutil- How to open text file by using Wordpad
Hello: Is it possible to open the text file either from client or server (sun) by using the wordpad? I was able to open it with Notepad; however, it was given the rigth format such as new line. WEBUTIL_HOST.NONBLOCKING('CMD /C NOTEPAD'||:input_select
-
Bulletin Board recommendations
Hey all, I was wondering if anyone had any suggestions for online forum-bulletin board software compatible with Mac OS X Server that is fairly user friendly to install and configure. It looks like phpBB is the norm, but just wondering what others are
-
i'm trying to do a mouse over effect on my buttons where they swap images everytime a mouse hovers over the button. I've tried to enter the javascript line suggested by http://swforum.sun.com/jive/thread.jspa?threadID=53771 ,here is what i put: docum