Compatibility OK between Air TV and TV PANASONIC TX-L55DT60E LED 3D : is it OK before I Buy ? Thanks.

Hi, I would verify the compatibility between the Air TV and the Panasonic TX-L55DT60E LED 3D ?
Is it OK before I buy ?
Thanks for your answer,
Jacques

It has HDMI so should be just fine, be sure to turn off any silly motion settings the TV offers.

Similar Messages

  • HT4437 What is difference between air play and home sharing if you just want to show iPhoto's on HD tv through apple tv (just purchased MacBook Air and Apple tv)

    What is difference between air play and home sharing when wanting to show photos on HD tv through apple tv?  Just bought Mac book air and apple tv. 

    You would have to use home-sharing if streaming from a computer. Computer would need to be on and running iTunes.
    http://support.apple.com/kb/HT4352
    Airplay would be useful if streaming from an IOS device
    http://support.apple.com/kb/HT4437

  • Known backwards compatibility issues between Robohelp 9 and Robohelp 8?

    Hi Group,
    In addition to avoiding the tasks in the Review menu, does anyone know of any other backwards compatibility issues encountered while opening and using files generated in RoboHelp 9 from within Robohelp 8? Thanks, gail

    Welcome to the forum.
    Simply the fact that RoboHelp 8 will not open a project that has been run in RoboHelp 9. Sure you might well open a project by deleting the CPD and perhaps the XPJ and using the HHP, however I would not recommend that except in an emergency.
    What I am not clear on is how you link that to "avoiding the tasks in the Review menu." What has that got to do with the question?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • IChat - compatibility problems between v2.1 and v3.1

    Hi,
    I now have the new iMac Intel with iChat 3.1. I am trying to use it with a friend who has OS 10.3.9 with iChat 2.1.
    I can see and hear him, but he can only hear me.
    Is there a compatiliby problems between v2.1 and v.3.1 or it is just a configu problems?
    Thanks a lot for any information
    Bruno

    Most likely cause is that you haven't updated the ProApplication Support file. Check here:
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

  • HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

    ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

    Hi,
    Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
    the Problem report.
    When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
    "native" windows drivers. Now, every major PC company has there own version
    Thus the problem report.
    There is  rather involved and lengthy procedure to check and install the correct Bluetooth drivers
    in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
    Here is what I propose;
    The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
    try apologizing to it and that you'll never never do it again, what ever it takes!
    Make the best investment you can make for your Blackberry, buy a media card.
    All the memory in the BB is dynamic, this facilitates the functions of the phone.
    By storing media in that memory, you effect are wasting X amount for file storage.
    Store all media and files on the media card, and you will have a smooth running device.
    They run about $25.00usd, they are easy to install, and they also make moving your
    media a snap. You will need the USB adapter that came with it, but you can get that at
    your local carrier store.
    So if you agree with this I need some info.
    On the Blackberry go to the options icon,click then scroll up to ABOUT.
    I need your software version number, it's listed in this format: 4.x.x.xxx.
    Send it back to me and I can tell you what size card you can get.
    Let me know your thoughts!
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Compatibility issues between PS3.0 and Windows Vista

    Have PS3 for Windows XP. Have had it a while and it wouldn't load on my old computer because the harddrive didn't have enough space.  Now trying to load it on to HP Pavilion bought last spring.  When I tried to load it, I got the error window with: compatibility issues with this software.  Windows didn't find a solution.  Went to adobe.com and tried update for PS3.0 which I thought should work.  it said 3.0.1.  Won't work.  What am I missing?  Am I missing anything?  Will Adobe work as I want it to work?  As it's supposed to work?

    Well, it's not "supposed" to work in Vista. The earliest version of Elements that officially works in Vista is 5, with the special patch. However, some people have had success running earlier versions in XP compatibility mode.

  • HT4623 Is there any compatibility problem between iPod 4 and Bose docks?

    Is there any compatibility problem beteween ipod touch 4 and Bose docks?

    What does Bose say? Make sure you look for a 4G with iOS 6.
    I do not recall being aproblem with iOS 6 but with 7 I think yes.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the dock
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • Compatability problems between NI-FBUS and Rosemount DXR375

    Hello,
    Some time ago I had the chance to use a Rosemount DXR375 FF handheld, which I hope is familiar for most instrumentation users. Well, I was using Configuration 2.3.6 and I had problems when I hooked up the DXR375, like having other devices going offline or even dissapearing from the network. I have tried to match the communication parameters, (T1, T2, T3, slot time, etc.) but I was not able to use DXR375 in combination with NI-Fbus in sa safely way. Please note that both FF interfaces (NI-FBus Configurator and DXR375) work properly when used separately, but as soon as they are together, conflict appears.
    I would like to know if somebody at the forum have good experience with DXR375 in combination with NI-Fbus.
    Thanks in Advance,
    Alfredo Matus
    Service Manager
    Endress+Hauser Chile Ltda.

    Alfredo,
    To be honest, I am not clear the relationship between DXR375 and Emerson 375 Field Communicator device. But if you are talking about 375 Field Communicator, I had ever put NI interface card together with it in the same H1 segment before, and as I remembered, the devices on the segment worked properly and I was able to read data from NI-FBUS Configurator software.
    However, as I know, the 375 Field Communicator normally works in a vistor address and will not conflict with LAS device, thus the PCMCIA-FBUS card is able to work well with it.
    I think the best way to find out the problem is to have another NI interface card with NI-FBUS Monitor software if it is possible; with the Montor software, you can simply know whether there is conflict in node addresses or bus communciations.
    Anyway, please feel free to contact us at [email protected] if you want to have further discussion about any conflict issues.
    Regards,
    -- Sean
    BTW: If you need any help to upgrade your Series 1 card, just let me know.

  • Compatibility problem between HBS-730 and iOS6 (6.0.1) ?

    I bought bluetooth headset named HBS-730.
    But, I think iOS have some problem with the compatibility about Bluetooth as follows.
    Sound streaming is delayed about 1 seconds. For instances, I got the game item in game play. After 1 seconds, The sound play. This is very unconfortable.
    Also If I listen to the music and pause the play, I hear the noisy after 1 seconds.
    I've search the similar issue in this community. and I found the follows.
    https://discussions.apple.com/thread/4389635
    Re: IOS 6 bluetooth issues - micro cuts on musichttps://discussions.apple.com/message/19670046#19670046
    I think this is bluetooth 3.0 compatibility problem because backbeat headset is works well with iOS6.01
    backbact is equiped with bluetooth 2.1
    First of all, I wonder this issue is iOS's problem or headset's problem.
    Please help me. I want to escape the this delaying problem.
    I'm very unconfortable and I lost the trust about the Apple's product.
    Thank you.

    I bought bluetooth headset named HBS-730.
    But, I think iOS have some problem with the compatibility about Bluetooth as follows.
    Sound streaming is delayed about 1 seconds. For instances, I got the game item in game play. After 1 seconds, The sound play. This is very unconfortable.
    Also If I listen to the music and pause the play, I hear the noisy after 1 seconds.
    I've search the similar issue in this community. and I found the follows.
    https://discussions.apple.com/thread/4389635
    Re: IOS 6 bluetooth issues - micro cuts on musichttps://discussions.apple.com/message/19670046#19670046
    I think this is bluetooth 3.0 compatibility problem because backbeat headset is works well with iOS6.01
    backbact is equiped with bluetooth 2.1
    First of all, I wonder this issue is iOS's problem or headset's problem.
    Please help me. I want to escape the this delaying problem.
    I'm very unconfortable and I lost the trust about the Apple's product.
    Thank you.

  • Is there a compatibility issue between Acrobat 10 and MS Office 2010?

    I'm having a problem printing to a PDF with MS Office 2010.  The program locks-up before the filename screen is displayed.  I can SAVE AS a PDF, but not print to a PDF.  I has worked previously, but started having problems a couple of months ago.  I've run both Acrobat and MS Office "fix it" programs, but no help.  Acrobat seems to work fine with Quicken.  Any ideas?   Bruce

    Hi Michael,
    Interesting, and yes, I can from the Acrobat Ribbon in MS Word.   Now I'm really confused...must be something associated with the Acrobat printer driver I have installed.
    Bruce

  • Compatibility issues between Office 2004 and Snow Leopard?

    Hi,
    Received and installed Snow Leopard today and I seem to be having issue after issue.
    I've managed to sort a few issues but Excel 2004 keeps crashing my mac. When I say crashing, the screen turns blue and reverts back to the log in screen without warning.
    Anyone else experiencing this?

    Try Neo Office, if you can't follow the directions already supplied:
    http://www.neooffice.org/neojava/en/patchmirrors.php?file=NeoOffice-3.0-Patch-7- Intel.dmg

  • We have you fill out card and iTunes is still the appstoor asks for payment method before you buy

    how can i edit my account?
    i need to change my country and a payment method
    i filld money to redeem and i cant buy anythings whaaaaaaaaaaaaaay???
    heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllllpp meeeeeeeee

    Sometimes it is helpful to post in your native language too so that another native speaker can pick up the post and explain to your better understanding.
    You have received a message regarding  "kernel protection" mode which is the computer's way of alerting you to a fault (usually) in the system files. The first thing to try is a shut down: Hold down the Power button for a few seconds until you hear the drive stop and see the display go black. Leave it for a little while, then press the Power button to start up your system as you normally would. This usually gives the system a chance to do a "File System Check" and make any necessary repairs. Nothing is required of you at this stage except to wait for the process to complete. If everything is now in order, then your computer will boot normally. It might take a few more minutes than usual; this is alright and not to worry. If everything is fine then relaunch the app where you experienced the problem and see what happens. If it is the same thing, then get the computer to a qualified
    Apple repair service center for diagnosis. (Before you spend your money on the upgrade there might be a fix closer to hand at a much lower price. The computer could very well "heal itself" in the restart process.)

  • Font compatibility with Office (for Mac and Windows)

    Hi,
    Despite extensive searching, I'm struggling with a font compatibility issue between my Mac and my colleagues' PCs. The main points in order:
    The fonts work correctly on both my Mac and other PCs.
    The font in question is HelveticaNeueLT Std, rolled up into which are several different weights. The files are OTF files. The same files install without any problems on all the computers in question (and show up in Font Book). And the font can be used successfully:
    - in Keynote, I select Helvetica Neue LT Std, and underneath choose whichever weight I want
    - on PCs, the font and weight can be selected from the drop-down list in MS Office.
    - in Office for Mac 2016 (Preview), I cannot select the font from the drop-down list, but can hit Cmd+T, and then select the appropriate font and weight under 'Latin text font'. What is odd is that in the dropdown list, only a particular weight/typeface is shown:
    As this is a preview version, I wouldn't expect Office to work perfectly just yet...
    When a file is created on a PC, it works fine on my Mac.
    Every file I have attempted to open that was created on a PC, and using these fonts, works fine. The fonts display correctly (i.e. including the correct weights), and I can work with the document without any problems. The only odd bit: sometimes in the dropdown box on my Mac it then says (null):
    Whereas at other times, the font name shows correctly:
    Both of those examples were created using the 'Thin' weight of HelveticaNeueLt Std. I can't see any pattern as to what causes this inconstency.
    The problem is that what I create on my Mac shows incorrectly on a PC.
    If I create anything using Office 2016 or Keynote, selecting the preferred weight as described above, it shows just fine on my Mac. But when I send the PPTX file to a PC, all weights look identical (it looks as though the PC has just displayed everything in a standard weight). This is the problem I am trying to solve.
    To try to get around this, I tried the process of removing the Helvetica/Helvetica Neue .dfont files that come with the Mac - but this didn't work and caused several other problems. Besides, the font I'm trying to get to use as intended has a different name.
    All help would be greatly appreciated - my thanks in advance.
    John

    Thanks Kappy and apologies if it is inappropriate - but just to clarify, my main question is whether fonts used in Keynote should be compatible with other software (in this case Office running on Windows). The Office for Mac Preview is a bit of a red herring but I thought it should be mentioned.
    I tried to clarify my first post, but it didn't work. What I wanted to add was simply whether Keynote handles fonts in a way that other pieces of software struggle to read - despite the font itself working perfectly in both environments.

  • Communicating between Air apps on local network?

    I am trying to build an AIR application that allows communication on a local network only.  Can I use the Local Connection to achieve this or is that only to communicate between apps on a single machine.  The functionality I am trying to achieve is simple check in/out app to let users know when someone is already working in a folder.   I already have the functionality built for this, I just need to be able to broadcast events to another AIR app on a local network.  Can anyone help or shot this down?  Thanks in advance.

    You are right: you can only use LocalConnection for communication between AIR applications (and SWF content in browsers) on a single machine.
    You may want to build a server application that the other AIR applications communicate with via a socket connection.

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

Maybe you are looking for