Compatibility Windows 10 and SCCM 2012 R2

Hi,
Is SCCM 2012 R2 compatible with Windows 10?
Will we need to update MDT 2013 or if they will be a new version? What about USMT?
When may we expect to have a fully compatible solution for Windows 10?
Thanks,

Hi,
It is explained it this blog post
http://blogs.technet.com/b/configmgrteam/archive/2014/09/30/windows-10-enterprise-management-with-sc-configmgr-and-intune.aspx
I haven't seen any offical statement of how long after Windows 10 is released in RTM that these products will be released as well, as we are getting closer more information will come I assume.
And USMT is included in ADK preview that is available here:http://www.microsoft.com/en-us/download/details.aspx?id=45522
If windows 10 is compatable with SCCM 2012 R2, I would say yes it works is it supported no, as Windows 10 isn't released.
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

  • Windows Intune, Windows 8.1, SCCM 2012 R2

    Hello,
    I am planning to setup a new infrastructure to manage devices using Intune and SCCM 2012 R2 for one of my customer.
    We plan to have one single site, where in the devices will be imaged with Windows 8.1 and then will be provided to users who roam around the world.
    We like to manage these devices and do:
    1. Inventory
    2. Software Distribution
    3. Software Updates
    4. EndPoint Protection
    5. Reporting
    I have come to learn that:
    1. Add and verify company domain at account.manage.microsoft.com
    2. Add UPN in AD
    3. Run DIR Sync for Users
    4. Configure Intune Subscription
    5. Install Connector
    6. Whats the next step for configuring Windows 8.1?
    My questions:
    1. Is Cloud based Distribution Point required for hosting content. If not, how will the devices download the content and install the app?
    2. Do we need PKI for Windows 8.1 devices(enrollment and management)?
    3. Where should I install Company App Portal?
    4. What are the different ways of enrolling Windows 8.1 device (Workplace & Store)?
    5. Any other info if you can share, really appreciate
    Please advice
    Rajiv

    Hello Nico,
    Thanks for the guidance.
    1. Distribution Point: manage.microsoft.com - whats the disk size/storage available by default. Is it unlimited. As the Intune license is user based. I can have 5 devices enrolled per user. I may have loads of packages/apps.
    5. Your apps need to be signed with certificate that's is trusted by your device : I guess when we import
    an Application in SCCM, it never checks if it has a signed certificate. One would need to ensure that the cert is present.
    Can I install software updates to devices managed using SCCM Intune?
    We are planning to have a single site with a remote DP for building devices with Windows 8.1. Once the device is ready, it will be given to the user. The user will enroll the device and is good to go. I am sure we will be able to embed Company Portal App
    into the build image?
    Thanks
    Raijv

  • Cost of Intune and SCCM 2012 r2 vs SCCM 2012 r2 ICBM

    Is there any research/info on pros and cons of SCCM 2012 using intune for internet clinet management vs SCCM 2012 r2 and ICBM?  Things like cost, supportabiliy, etc.  I have seen intune vs sccm not Intune & SCCM vs SCCM and Internet Client
    Based Management. 
    Cyndy

    Hi,
    I think the reason is that you cannot manage Windows clients using the WIndows Intune Agent and integrate it with SCCM 2012. The integration with Intune and SCCM 2012 is for Mobile Device Management only so there is no possibility to install the Windows
    Intune Agent on a client and then manage it through the SCCM Admin Console.
    THe only scenario where that would work is if you manage a Windows 8.1 with the OMA-DM agent and enroll them in Intune as a mobile device with a limited set of features.
    So ICBM is still the way to go if you need all the features in SCCM or you want one console to rule them all.
    Regards,
    Jörgen  
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • System task 'policyevaluator_unlock ' returned error code 0x8000fff in windows pacth deployment on windows 7 by sccm 2012 Sp1

    hi All,
    I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
    system task 'policyevaluator_unlock ' returned error code 0x8000fff
    Kirpal Singh

    Thanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
    unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
    schedule”.
    BC

  • Windows Intune with SCCM 2012 R2.

    Windows Intune with SCCM 2012 R2.
    I am able to download Certificate Signing Request (CSR).
    When I submit CSR file to Apple Push Certificates Portal I get following prompt:
    Do you want to open or save create02fe592d.json (132 bytes) from identity.apple.com?
    I am unable to get the APN Certificate.

    That is a known issue with Internet Explorer and the Apple Website.  If you just go back to the main page where all your certificate are located you can download it from there.
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • Trouble Deploying Windows updates via SCCM 2012

    Hello
    I'm testing Windows updates via SCCM 2012 - I have successfully deployed updates to 4 test PC's.
    I then added another 15 Test PC's into the same group - Not one of them receive updates (they're all within the same Domain and even in the same room)
    I reviewed "UpdatesDeployment.log -
    1. I highlighted some points that stood out to me
    2. I have the Maintenance window set to 24hours for this test
    From the Server side and Clients side - What are the best .logs to look at.
    CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    Suspend activity in presentation mode is selected    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    Proceeding to non-business hours activites as presentation mode is off.    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    Auto install during non-business hours is disabled or never set, selecting only scheduled updates.    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    Attempting to install 0 updates    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    No actionable updates for install task. No attempt required.    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)
    Updates could not be installed at this time. Waiting for the next maintenance window.    UpdatesDeploymentAgent    22/08/2014 10:00:00 PM    4604 (0x11FC)

    Hi,
    You could also check Windowsupdate.log on the client.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Top 4 basic issues that are encountered in SCOM 2012 and SCCM 2012

    HI,
    I need to give a presentation on the basic issues that are encountered in SCOM 2012 and SCCm 2012.
    Can anyone help me out with this?
    Thanks in advance
    Rohith Kumar

    Hi,
    I am not familiar with SCCM, so I will give some issue I encounterred in SCOM:
    1. Not monitored and grey agent, here is an article for your reference:
    http://technet.microsoft.com/en-us/library/hh212723.aspx
    2. Failed to discover and install agents, this may caused by the action account or install account does not have proper permissions to install the agents. Some time maybe the discovery rule is not enabled.
    3. Failed to import Management Pack, this may caused by references MPs are not imported to the management group, or sometime the proper referenced MPs are imported, but there may be incorrect typing in the XML file which defines the management pack.
    4. Runas account and Action account fail. If you change password for action account, you may also need to change the password everywhere the account is used in SCOM. For run as account, if the account does not have enough right to run some tasks, we may
    encounter errors. You may refer to the below link which take SQL mp for example:
    http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • Windows 8.1 Mobile Device Management and SCCM 2012 R2 - 'Turn on' option missing

    I am trying to test a virtual desktop with SCCM 2012 R2 integrated with Intune. There is no Configuration Manager client on the workstation, the Intune subscription is configured and enabled for Windows enrolment, AD is synchronizing with Intune, DNS has
    the enrolment record added and resolves, the user can logon to Intune from the client using Internet Explorer and the client has had the registry key added with the DiscoveryService  configured to manage.microsoft.com. The problem is that on
    the 8.1 workstation in Workplace Settings the only option is 'Join' and the 'Turn-on' option is missing. How do I get it to appear?

    Yes I am using an activated version of 8.1 Enterprise, it is in a workgroup and I am logged in as a member of the local Administrator's group but not Administrator. I even joined the domain again and then removed it. Still there is only the 'Join'
    option and no 'Turn on' option. This is driving me nuts.

  • Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

    Hi,
    Trying use "User-Driven Installation"  with
    SCCM 2012
    R2 CU4 and MDT
    2013 Update 1 for deploy Windows
    10.
    Created MDT Task Sequences with
    template "Client Task sequence"
    and Deployment Method "User-Driven Installation".
    When I try to deploy I have error like:
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Part smsts.log
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
    [ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the action: Error in the task sequence.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
    The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

    MDT Updates for Windows 10 Technical Preview Build 10041
    Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
    http://zalozny.com.ua

  • Applocker with Windows Installer rules and SCCM 2012

    Hi,
    We have been running Applocker since two years on Windows 7 Enterprise clients with SCCM 2007 as management and distribution tool.
    This setup was working fine until we migrated to SCCM 2012 and started to encounter problems with msi-packages not being able to self-heal when the source was the sccm client cache.
    We have recreated this scenario in a lab environment.
    Our setup is this:
    Windows 2008 R2 (DC)
    Windows 7 Enterprise SP1 (Client)
    Standard user (not admin)
    SCCM 2012 R2 (upgraded from 2007)
    Applocker with these rules:
    Executable Default rules enabled (Enforced)
    Windows Installer Default rules enabled (Enforced)
    Exception for %WINDIR% (where SCCM cache is located)
    Script Default Rules enabled (Enforced)
    Application msi-package with self-heal (omus) and advertised shortcuts
    We install the application from the sccm cache (%windir%\ccmcache) and then trigger a self-heal (user components being copied to the user profile).
    What we see on the client is: Error 1718. File C:\Windows\ccmcache\54\application.msi was rejected by digital signature policy.
    Event log is showing: Event 1008: The installation of
    C:\Windows\ccmcache\54\application.msi
    is not permitted due to an error in software restriction policy processing. The object cannot be trusted.
    It looks like the file cannot be evaluated by Applocker and therefore is not trusted. We get an Access Denied error when testing AppLocker-policy with the following PS-command,
    Get-AppLockerPolicy -Effective | Test-AppLockerPolicy -Path C:\Windows\ccmcache\54\application.msi. This command works fine when accessing files in the cache-folder on a SCCM2007-client.
    For testing purposes we recreated a similar folder structure: C:\Windows\Folder1\Folder2\application.msi where the user has no permissions on Folder2 and read on the other folders and the File.msi.
    This is how the permissions look like in SCCM 2012 (no user permissions on %Windir%\ccmcache). Applocker cannot evaluate the trust-level of application.msi.
    The GPO setting “Bypass traverse checking” is set to everyone.
    As we can see, the permissions are the same on SCCM 2007 client cache (%Windir%\syswow64\ccm\cache) but we do not have this issue there.
    Has anyone got Applocker (with windows installer rules actived) to work with SCCM 2012 and windows installer self-heal?

    More info. I found some people also encounter this same issue, but specific msi, take a look at
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ad92754-f01e-410e-97db-7a9bc81586db/msiinstaller-event-1008-when-trying-to-install-3ds-max-2011-after-group-policies-apply-on-domain?forum=winserverGP
    Juke Chou
    TechNet Community Support

  • Microsoft Intune and SCCM 2012 R2 Integration - Windows 7 clients.

    Hi All,
    This is our scenario I am trying to find out more about Intune integration with SCCM 2012 R2 and what solution is best for us.
    We have a SCCM 2012 R2 instance up and running which services/monitors machines on our internal network. All of these machines are Windows 7 OS. We have laptops that travel frequently and need for these to report back to our SCCM server whilst connected
    via internet connections. Also we have multiple "off domain" machines (ie workgroup machines) which we also need to report back to the same SCCM server.
    I have read a lot about Intune integration with SCCM but it appears to be targetted at MDM not around PC management.
    What would be the best way for us to move forward?
    Thanks in advance.

    Just see my reply in the ConfigMgr forums. 
    Torsten Meringer | http://www.mssccmfaq.de

  • WSUS 4.0 and SCCM 2012 SP1 Sync Errors

    SCCM 2012 SP1 is installed on a Windows 2012 Std server with the WSUS 4.0 Role installed.
    All other links I have found list a 2008 R2 Server with WSUS 3.0 SP2 hence all the "fixes" revolve around hot fixes and patches/settings for WSUS 3.0 or 2008 R2 systems.
    WSUS is set for port 8530/8531
    SCCM SUP is set for ports 8530/8531
    Both are on same machine (single site SCCM 2012 SP1 System)
    What does Bad Configuration, SUPs present but no default SUP
    mean and how do I fix it?
    Recent entry in my WCM.LOG states:
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.401+420><thread=6052 (0x17A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.454+420><thread=6052 (0x17A4)>
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.481+420><thread=6052 (0x17A4)>
    Changes in active SUP list detected. New active SUP List is:~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.489+420><thread=6052 (0x17A4)>
        SUP0: SCCM2012.xxdomainnamexx.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
    Bad Configuration, SUPs present but no default SUP  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
    Waiting for changes for 11 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
    Wait timed out after 11 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
    Randall

    Here is my WCM Log from this mornings "re-attempt"
    Trigger event array index 0 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:22.156+420><thread=5540 (0x15A4)>
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.179+420><thread=5540 (0x15A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.181+420><thread=5540 (0x15A4)>
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.194+420><thread=5540 (0x15A4)>
    No SUPs are present  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.199+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.220+420><thread=5540 (0x15A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.224+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.226+420><thread=5540 (0x15A4)>
    Trigger event array index 0 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:37.356+420><thread=5540 (0x15A4)>
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.388+420><thread=5540 (0x15A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.493+420><thread=5540 (0x15A4)>
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.541+420><thread=5540 (0x15A4)>
    Changes in active SUP list detected. New active SUP List is:~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.543+420><thread=5540 (0x15A4)>
        SUP0: SCCM2012.MORTONGENERAL.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.546+420><thread=5540 (0x15A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.550+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.553+420><thread=5540 (0x15A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.559+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.562+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.593+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.596+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.611+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.614+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.617+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.620+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.634+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.637+420><thread=5540 (0x15A4)>
    Trigger event array index 0 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.640+420><thread=5540 (0x15A4)>
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.761+420><thread=5540 (0x15A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.798+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.813+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.823+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.826+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.840+420><thread=5540 (0x15A4)>
    Waiting for changes for 23 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.843+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.846+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.849+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:07.863+420><thread=5540 (0x15A4)>
    Waiting for changes for 23 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:07.866+420><thread=5540 (0x15A4)>
    Wait timed out after 23 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:30.913+420><thread=5540 (0x15A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.917+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.920+420><thread=5540 (0x15A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.923+420><thread=5540 (0x15A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:31.041+420><thread=5540 (0x15A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.045+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.048+420><thread=5540 (0x15A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.051+420><thread=5540 (0x15A4)>
    Randall

  • Orchestrator and SCCM 2012 integration: run task sequence and install assigned applications/packages?

    Dear,
    We do not have Orchestrator running in our SCCM 2012 R2 environment. Though I wonder if we could accomplish the following scenario with it:
    Task sequence Windows 7 => Orchestrator step which queries assigned installations to the computer object and installs them one by one.
    Could you advise?
    Kind regards,
    Stev.
    SteveWonB

    > > Define "assigned to computer objects". How is this done technically?
    Well, computer objects are members of collections via AD memberships, like the collection "W7-Google-Chrome" (exists of 100 computer objects).
    Deploy of packages is done to these collections. So a computer member of  "W7-Google-Chrome"  will automatically get Google Chrome.
    Some computers are member of 30 collections, some of 80.
    Goal is to have the task sequence run all applications/packages assigned (with their reboots if needed).
    Kind regards,
    Steven
    SteveWonB

  • Driver issues with HP Z440 and SCCM 2012 R2?

    Greetings, we received our first charges of Z440 workstations last week. We immediately downloaded the HP Z440 driverpack from http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html and imported those into our System Center Configuration Manager 2012 R2. Of course we did use the Win 8.1 drivers to inject into our boot image and wie normally imported the Windows 7 drivers for the Windows 7 deployment.Well, unfortunately SCCM WinPE5 does not show any drives installed, even with the correct drivers installed. We even tried to import  the WinPE 5 driver pack and the drivers from SoftPaq download manager, but none of those seemed to work. Is there any known issues with Z440s drivers and SCCM? Please help me out on this, it's pretty urgent. Thank you & kind regards

    The problem cannot be replicated. My Z440 has an 1TB WD SATA drive attached to port 0 of sSATA 6 Gb/s. Download and install the ´Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update´:   https://www.microsoft.com/en-US/download/details.aspx?id=39982 Download and extract the ´Intel Rapid Storage Technology Enterprise Utility and Driver for Microsoft Windows (64-bit Editions)´, 4.1.0.1046 B(12 Nov 2014), sp69762.exe:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978829&swItemId=wk_139802_1&swEnvOid=4059 Copy the IRST driver “64bit_RSTe_4.1.0.1046_F6_Drivers” abd sub folders into “C:\z440_x64\64bit_RSTe_4.1.0.1046_F6_Drivers” Open the ´Deployment and Imaging Tools Environment´ command window as administrator and create bootable USB media:copype amd64 c:\winpe_x64 Dism /Mount-image /ImageFile:c:\winpe_x64\media\sources\boot.wim /index:1 /MountDir:c:\winpe_x64\mountDism /Add-Driver /image:C:\winpe_x64\mount /driver:C:\z440_x64 /recurseDism /Get-Drivers /image:C:\winpe_x64\mountdism /unmount-wim /Mountdir:c:\winpe_x64\mount /commitMakeWinPEMedia /UFD c:\winpe_x64 d: Boot Z440 to F10 Setup.Set Factory Defaults and exit.Boot to WinPE media created above.I also tested the wim file as the boot image in SCCM 2012. The hard drive is detected correctly. 

  • WSUS 4.0, SQL server, and SCCM 2012 version help

    I am trying to get to the bottom of a version question.
    We currently have SCCM 2012 R2 up and running, with a DB on a separate server version MSQL 2008 R2. Now we also are using the WSUS integration. I am being told WSUS 4.0 cannot be ran on SQL server 2008 R2, so they could only install and use WSUS version
    3.0.
    Can anyone out there please shed some light on my version items from above?
    Thank you

    I am being told WSUS 4.0 cannot be ran on SQL server 2008 R2, so they could only install and use WSUS version 3.0.
    (Pedantically speaking this is true because there is no such beast as "WSUS 4".)
    However, WSUS v6.2 (Windows Server 2012) and WSUS v6.3 (Windows Server 2012 R2) can most certainly be installed on SQL Server 2008 R2, and the official documentation is at
    http://technet.microsoft.com/en-us/library/hh852344.aspx
    However, the *preferred* installation methodology, unless you've expressly chosen to use a remote SQL Server, is to use the Windows Internal Database feature which is built into Windows Server 2012 and 2012 R2.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for

  • "...does not support this type of alias."

    I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an err

  • Windows 7 compatibility to firefox

    Is there any fire fox program that is compatible with windows 7

  • Will LR v1 support DNG full resolution embedded previews?

    I would like to know if LR v1 will support the DNG full resolution embedded JPEG previews; and if not, will we be seeing a new DNG Converter along with the release of LR v1 that will support the full res previews as well as the new tonal adjustments

  • How to view compiler warnings?

    Hi all, newbie here to PL/SQL and SQL Developer. I have (I think) successfully written my first PL/SQL Trigger and when I run it to update the server trigger file it tells me it was successfully compile, but that there was a warning. How do I see the

  • Please help with paper profiles

    I'm trying to set a paper profile I use with my canon i560 printer. I set the profile under printing preferences where I set the print quality, color adjustments and intensity then add to the profile tab under printing preferences. Where I seem to ha