Compatibility with 10g Express

Greetings all,
I know that APEX is not 'certified' to work with 10g, but is the combination of 10g Express and Application Express "viable" ?
I have a situation that requires a pretty quick turn-around and while I could experiment to find this answer, in this case it may be faster just to ask.
Oh, and I know I will lose the interactive-reporting ability.

Hello:
>
I know that APEX is not 'certified' to work with 10g, but is the combination of 10g Express and Application Express "viable" ?
>
Where did you get this information from ?
Please read through APEX 3.1.2 requirements at
http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/pre_require.htm#i1009513
Varad
Edited by: varad acharya on Jan 28, 2009 12:25 PM

Similar Messages

ODP 11 compatibility with 10g

Can anyone comment on whether ODAC 11 (albeit still in beta) is likely to raise compatibility issues with apps created with ODAC 10 against Database 10g?
At one of the recent Oracle Develop events, I recall being told that 11 beta was stable enough to be used straight away but I'm not sure if anything was said about backward compatibility.
Graham Keitch
www.oracleonwindows.co.uk

Hello:
>
I know that APEX is not 'certified' to work with 10g, but is the combination of 10g Express and Application Express "viable" ?
>
Where did you get this information from ?
Please read through APEX 3.1.2 requirements at
http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/pre_require.htm#i1009513
Varad
Edited by: varad acharya on Jan 28, 2009 12:25 PM

No Http server on port 8080 with 10g Express Edition ( TNS-12631 error)

I downloaded the Oracle 10g Express Edition for Microsoft Windows and tried to install the software on 3 pcs.
2 pc works but mine is not working.
All works well during installation but when I want to connect to the home web page, it displays error (http://127.0.0.1:8080/apex)
It isnormal because I have no process running under 8080 port.
But I don't know why there is not an http server on port 8080.
netstat -a :
Connexions actives
Proto Adresse locale Adresse distante Etat
TCP LABOLLC:epmap LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:microsoft-ds LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1521 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:42510 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1051 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1255 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1291 localhost:1292 ESTABLISHED
TCP LABOLLC:1292 localhost:1291 ESTABLISHED
TCP LABOLLC:netbios-ssn LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1338 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1342 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1355 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1359 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1472 messagerie.castel.fr:epmap TIME_WAIT
TCP LABOLLC:1473 messagerie.castel.fr:1026 TIME_WAIT
UDP LABOLLC:microsoft-ds *:*
UDP LABOLLC:isakmp *:*
UDP LABOLLC:1027 *:*
UDP LABOLLC:1339 *:*
UDP LABOLLC:1340 *:*
UDP LABOLLC:1356 *:*
UDP LABOLLC:1357 *:*
UDP LABOLLC:1427 *:*
UDP LABOLLC:4500 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:1028 *:*
UDP LABOLLC:1062 *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:netbios-ns *:*
UDP LABOLLC:netbios-dgm *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:42508 *:*
The file sqlnet.log contains the following comments :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-MARS -2007 16:28:39
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
I don't know what to do !!
Help

Yes i Check all that.
For example, I have Tomcat installed on my PC and I can launch it easily.
So that means that port 8080 is completly free.
No I haven't http service as you can see with netstat results.
Lokk at the log sqlnet.log, I have following :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-MARS -2007 14:46:35
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Thanks

AIX 6.1 compatability with 10g

AIX 5.3 was upgraded to AIX 6.1.
Running OEM Grid 10g R3.
The repository database fails to start:
SQL> startup;
ORA-27123: unable to attach to shared memory segment
IBM AIX RISC System/6000 Error: 22: Invalid argument
Additional information: 1
Additional information: 68157440
SQL>
Red and tried all solutions presented by Metalink.
No progress...
Is this a result of incompatability of 10g and AIX 6.1?
Is there a support for AIX 6.1 by Oracle 10g?
Thx,

From Oracle® Database Release Notes
10g Release 2 (10.2) for AIX 5L Based Systems (64-Bit)
AIX 6.1 Certification
Starting with Oracle Database 10g release 2 (10.2.0.3), AIX 6.1 (64 bit) operating system is supported. The latest information on patches and support for this release is available in OracleMetaLink document 282036.1.

Final Cut Pro Project compatibility with FC Express

Hello, I have the latest universal version of Final Cut Pro. If I edit a project can someone with Final Cut Express open it and work on it?
THanks,
Neobe

No -- nothing I can think of will work...
Can go the other way... but not down to FCE.
CaptM

G4 mac compatability with Airport Express?

I'm still a bit of a ******* when it comes to my AX (and thanks to the 2 people who answered my other question regarding it)
In this case, I have a software dillemma - my Powerbook G4 says that it is not sufficiently updated to connect to my AX. The Airport Assitant Utility helps with "Graphite and Snow", but not my AX.
Where can I update the Assistant for my Powerbook G4 laptop, or is that even possible? - so that it will (hopefully) work with my AX?
Powerbook G4 12-inch Mac OS X (10.3.9) Intel Mac Mini 1.5GHz Core Solo 1GB RAM Mac OS X (10.4.8)

Duane,
I have a similar problem and am wondering how my situation works with your statement of 2wire not working with AX.
Posted: Jul 2, 2007 10:01 AM in response to: bleedingrose19
The AX can not be used to wirelessly extend the wireless network of a 2Wire portal. The 2Wire is not compatible with Apple's WDS.
My original set up worked great with the AX. DSL modem (NON-wireless), to router, to Airport Base (original type) to AX. The old modem and router started dropping everything so I upgraded to a 2wire wireless modem through my DSL provided.
I have my 2wire working and my Airport working but can't get the AX to work.
I've reset the AX time and time again so that it doesn't remember a thing. I want to use the AX as a booster to another part of the house so I can work on my laptop there and my husband can use it with an ethernet wire to his PC like we use to be able to do.
Here is how I have it set up now on a WEP password.
Plugged into this router is:
733 MHz PowerPC G4 running OSX 10.3.9
Airport Extreme (1st edition)
HP 6MP laser printer that connects to a Asante box (needs appletalk)
Airport Extreme has a USB Printer attached to it
Airport Express that is a booster and is also used by a non-wireless PC laptop for internet access using a blue cable
PowerBook and an iBook using the wireless set up. Both running OSX 10.3.9

6500-E with SUP720 compatibility with 10g module

I have 6509-E chasis with supervisor VS-S720-10G.
I need to add a new WS-X6708-10G-3C= module to this same chasis.
As per the cisco datasheet both the cards and the supervisor are compatible, just need to confirm this.

WS-X6708-10G-3C will never be compatible with Sup2T. The Sup2T has DFC4/PFC4 and the card has DFC3/PFC3 card which cannot be upgraded.

ADSL/ISP compatibility with Airport Express

Airport Express doesn't seem to work with my new ADSL connection which is provided by Demon. They aren't helpful and its driving me mad, can anyone shed some light on this for me as I'd like to be able to use my ibook wirelessly. Having changed to demon and having my internet connection coming through my telephone line doesn't seem to allow me to connect my Airport Express in any shape or fashion. Am I just being a bit thick? Thanks in advance!

Starting with a very basic question - do you have an ethernet-interface DSL modem connected to the ethernet port of your Airport Express, and if so what make/model is it?

Safari Compatibility with airport express and remote speakers.

Is there a good reason why Safari shouldn't broadcast sound to remote speakers through Airport Express in the same way that ITunes does. I'm thinking specifically about my Netflix addiction and that I always have to plug directly into a pair of HK speakers rather than play remotely over my whole home audio. I will restrain my capitalist conspiracy theories for now....any thoughts?
Thanks

Welcome to the forums!
Netflix haven't updated to comply with Safari 5 yet, but in the meantime they offer the following solution:
http://www.engadget.com/2010/06/07/how-to-re-enable-netflix-in-safari-5/

Audio/midi interface compatibility with Logic Express Mac osx 10.6.5

hi all, I'm looking for a compatible audio/midi interface to use with the latest mac os. I recently purchased a Ediroll UA25 but was unable to get it working . I installed the latest drivers from the Roland site but when plugged in it just wasn't being recognised. I sent it back and got a full refund but now I am insure if the Ediroll was faulty or if it wasn't compatible with os 10.6.5. I am now in the process of looking to purchase another interface but am looking for help from you guys.
Thanks in advance,
kiev

Hi,
just out of curiousity: did you use the UA-25 or the UA-25EX? I know the 25EX has a driver switch on it's back where you can enable a standard driver which should be compatible to OS X without an additional driver.
However, i didn't find another interface including a compressor except for the Yamaha Audiogram 6, if you need this feature.
If you don't need it, buy a MOTU, preferably with firewire, or a Presonus. If you want quality, maybe an Apogee Duet. I myself - due to shortage of funds - still use either my Tascam Fireone or my Alesis I/O 2. The Alesis sounds nice for it's price, but i won't buy any of these lower end interfaces anymore. You get what you pay for. I also used the Edirol UA-25EX for a time, but this was before snow leopard, so i can't really say "Yes or No", but it was definitely a very good interface compared to it's price. I won't recommend M-Audio, however, but others like it.
Fox

M-Audio Fast Track Pro compatibility with Logic Express

I am looking to add M-Audio Fast Track Pro. Does anyone have feedback for me, such as yes or no, or what else I might consider?
Thanks,
Tony

I have one and it works great for me. I'm still using LE8, but I'm sure it works with 9 as well. I use is primarily to record vocals (I've got an older ElectroVoice condenser mic). No complaints. If I had the money, I might go with a Firewire device, since it would be faster (less latency), but I don't have any regrets using the FTPro at all. I also use it to monitor my recording with its headphone jack.

Import/export in 10g express edition

hi all,
my application was runing in win2000server and 8i oracle. now i want to change to xp with 10g express edition.
i am geting error while importing data of 8i exported file in to 10g ED (as error 12899).it is missing the data while importing.
my data contain arabic charchters.
please help out

ORA-12899: value too large for column string (actual: string, maximum: string)
It breaks out character sets conversion from arabic to unicode. It needs
more length than arabic.
Can you create tables on Oracle10g XE before importing?
Oracle8i Oracle10g
CHAR(N) CHAR(N char)
VARCHAR2(N) VARCHAR2(N char)

Connecting oracle 10g express edition to jdeveloper

I am having all kinds of problems connecting oracle 10g express edition with my jdeveloper 10.1.3.3. I can query the database from my command line so I know it is set up, but for whatever reason jdeveloper will not connect with it. When I try to connect with the database through jdeveloper here is the error I keep getting:
Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
localhost:1521:ORCL
I have been all through the google results looking for an answer and have come to the conclusion that it is something with either the listerner file or the tns file, but as of yet have been unable to locate them. here are both of those files too.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = ##########)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = #########)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please any help would be appreciated I have been at this for days, thanks.

This has to be some kind of bug with 10g express because I see lots of people having similar problems. I'm in the process of uninstalling 10g, and I will re-install it see if that makes a difference. Again if anyone has any other ideas please keep them coming because this is utter BS it shouldn't be this hard.

Oracle Database10g Express Edition's compatibility with Forms/Reports 10g

hi,
I have a problem while connecting from Oracle Forms/Reports 10g to Oracle Database10g Express Edition.I have configured through the net configuration assistant and it shows the test is also successful. But while connecting from Oracle Forms/Reports 10g, an error is being displayed saying that the TNS could not resolve service name(ORA - 012154). I am able to connect to my database server normally. I got a doubt now regarding Oracle Database10g Express Edition's compatibility with Oracle Developer Suite 10g. Can I use Oracle Database10g Express Edition as backend for Forms/Reports 10g in a stand alone machine.
Can anyone please give me a solution regarding my issue.
Thanks in advance.
RAKESH

12154 means that the TNSNAMES.ora that reports is using does not understand what the '@XE' means.
Check that you do not have several different TNSNAMES.ora files - there are probably several, and the one you are using probably does not point to XE. This is the most common cause I've seen.

Using Oracle Developer Suite 10g with the 10g Express Edition Database

I'm new to Oracle and I'm taking an SQL college level course using a text book entitled "Guide to Oracle 10g". Our text book came with Oracle Developer Suite 10g (9.0.4.0.1) but no database. We adopted the 10g Express Edition (XE) as the database. I have both the database and the Developer Suite loaded on Windows XP Pro. I've been using the database for months now and it runs fine and the Developer Suite installed OK.
However, I would like to use some of the Developer Suite apps (for learning purposes) with the database but I can't seem to log on to the database through the Developer apps when I open them and use my 10g XE database user-name and password. For starters, I would like to see if I could use the edition of SQLPlus (release 9.0.1.4.0) that comes with the Developer Suite because it has configuration options that are not available in the SQLPlus command line version that 10g XE contains (which otherwise works fine).
When I open SQLPlus (Developer Suite Version) and try to log on with my database user name and password (and no host string), I get the error:
ORA-12560: TNS:protocol adapter error
I did search the discussion forum first and also reviewed some Oracle pdf's including the concepts pdf but came up empty. I would greatly appreciate any suggestions on how to succeed or a determination of the compatibility of 10g XE with the Developer Suite. Thanks kindly.

I think your last idea might be helpful at this point and in case it matters, they are both installed on a sinlge machine (laptop). Thanks in advance:
Here is the Developer Suite tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SID = PLSExtProc)
Here is the 10G XE tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = obw)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)

Compatibility with 10g Express

Similar Messages

Maybe you are looking for