Compatible addin version of excel 2007?

Hi All,
I'm using excel 2007 and installed 7.5 essbase excel addin, but it's not working for me,
is it compatible, if not then can anyone let me know the compatible version of addin for
excel 2007
Regards,
Gyan

OK, now you have let out my little secret, I am John Goowin, CL, GlennS_2 and sometimes GaryCrisci :) I jsut sit on the board all day longanswering myself and correcting my alter ego CL

Similar Messages

  • Is Discoverer Plus compatible to the Microsoft Excel 2007?

    Hi,
    I have a Discoverer Report in which the data is formated with Bold,underlines, $ signs and different background color for the grnad totals etc..
    When i export the data to microsoft excel 2007 i loose all the formatting. Microsoft Excel 2003 did not had this problem.
    Is Microsoft Excel 2007 is compatible with Discoverer Plus? Do we have any Patch which will resolve this issue?
    Please advice.
    Thanks in advance.

    Hi,
    Is Microsoft Excel 2007 is compatible with Discoverer Plus?Yes,it is compatable with discoverer and we are also using office 2007
    Do we have any Patch which will resolve this issue?there is no patch required for this and it doesnt deal with patches.Do check out with your admininstartor installed office properly or not.By the ay did you install full version which is licensed or the crack version.I dont think so crack version works out.
    go through this link [http://support.microsoft.com/kb/277621]
    Hope it helps you.
    Kranthi.

  • Essbase excel add-in 7.1.5 compatible with Microsoft office excel 2007

    Hi All,
    Can you please let me know Essbase Excel add-in 7.1.5 version is compatiable with Microsoft excel 2007.
    Current Environment:
    Hyperion Essbase Administration services 11.1.2
    Essbase Excel add-in 7.1.5
    Microsoft excel 2003
    We have requirement some of Essbase excel templates developed with macros in Excel 2003 and client is planning to change excel 2003 to 2007 version.Is it possible all templates migrate from Excel 2003 to Excel 2007 versions.Required your valuable suggestions.
    Thanks,

    Looks like it: Re: Hyperion Essbase Excel Addin - Unable to connect
    But the OP in that thread never posted what solved his problem, if it was ever solved.
    Regards,
    Cameron Lackpour

  • XL reporter generate in excel file cannot view in some excel 2007 version

    Dear all,
    Hi friend. Do you any experience before about the file generated by xl reporter cannot to view correctly in excel version 2007 in some workstation?
    I have a client cannot view the result file generate by XL reporter in excel version 2007. Strange..It is working fine on other workstation with version 2007. However, a few person who carried laptop cannot view the excel file.
    I tried to copy the file & view into my excel 2007. It is working fine. Also i check the version for other 2007 workstation which is working, marco setting, operation system Service pack. All is same.
    The report view showing something like this #NAME#NAME#NAME where cannot see the value inside. However when i view the same file my other PC who used version 2007 as well it is fine.
    Any other idea about compatible or version for excel 2007?
    Thanks in advance.
    Regards,
    Eric

    Hi Eric,
    Check the following thread
    Security settings Excel 2007
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Which TDM Addin for Excel 2007?

    I downloaded what I think is the latest TDM add-in for excel 2007.  When I go to open my file a message comes up saying that my file has more than 65000 rows.  I know the limitation is not in excel 2007.  Will the add-in only load 65000 rows of data? 

    Frank,
    So the installation of the addin went smoothly?  You did not have to add it in manually like in this KB?
    http://zone.ni.com/devzone/cda/tut/p/id/5885
    You may want to check the specs on the trial version of excel 2007 that you have.  Did you get this from the web?  I don't know if Microsoft would do this, but sometimes the trial software won't have all of the features of the full version.  I just installed the addin on my machine with full version of excel 2007 and was able to open a TDM file with a million random numbers stored in it. 
    A good way to test this would be to just create a spreadsheet file with 100,000 numbers in it, then try to open that in excel just to see if it throws the same error.  That would eliminate the possibility of the addin being to blame.  If the file opens without error, then you may want to check that the addin was installed correctly by referencing the KB linked above.
    Have a great day.
    Brian Coalson
    Software Engineer
    National Instruments

  • Information of Print Area is missing in VB6 Addin of version Excel 2007 and Excel 2010

    Hallo, 
    I have a problem with my old VB 6 COM Addin. My document has Print Area, but when I use my addin to open this document. The information of print area is lost. 
    This problem takes place only in the following situations.
    If the PrintArea is set in Excel 2007 and 2010, it will be missing. But in Excel 2003 without problem.
    From the code, the  ".ActiveSheet.PageSetup.printArea" is always empty, although when the print area is configurate in Excel 2007 and 2010
    What is the possible reason of this problem?
    Thanks very much.

    There are several things I don't follow in the details you gave
    "I click an excel document in the third-part program and Excel 2007 will be open automatically"
    - Describe the 3rd party program you open the workbook in if not Excel"
    - What do you mean by "click and Excel document", what do you click and where is the document
    - Why click on an Excel document (workbook, worksheet something else?) to get a 3rd party app to automate Excel, then does some other workbook load?
    It's very confusing!
    Did you try the code in VBA in the instance of the workbook whose sheet you want to return the Print Area
    Re: Excel Object Library is 9.0
    Did you set a reference to XL-9 in the test app with my code then transfer to a different system with 2007?
    However, a ref to xl-9 shouldn't be a problem if the code compiled with that ref. If the app/dll is transferred to a different system it will pick up the Excel GUID in that system, which is exactly the same for all versions since Excel97. The only time it
    would be an issue is if code compiled with a new object model is not supported when used with an older Excel object model.
    The fact my code appears to work without error returning the message "Print Area not defined" suggests it is referring to a different workbook, ie one in which the Print-Area has not been defined. Double check which workbook it is referring to,
    eg
    Private Sub cbPrintArea_Click(ByVal Ctrl As Office.CommandBarButton, _
    CancelDefault As Boolean)
    Dim ws As Excel.Worksheet
    Dim s As String, s2 As String
    On Error Resume Next
    s = xlApp.Caption
    If Err.Number Then
    MsgBox "xlApp error " & vbCr & Err.Description
    Exit Sub
    End If
    Set ws = xlApp.ActiveSheet
    s2 = ws.Parent.Name & vbCr & _
    ws.Name & vbCr & _
    ws.Range("A1").Value & vbCr
    If Err.Number > 0 Then
    MsgBox "failed to reference ActiveSheet"
    Else
    s = ws.PageSetup.PrintArea
    If Err.Number Then
    MsgBox Err.Description
    Else
    If Len(s) = 0 Then s = "Print Area not defined"
    MsgBox s2 & vbCr & s
    End If
    End If
    End Sub
    This should confirm the workbook name, activesheet name and value in A1 (before running maybe add the current time in A1 with ctrl-shift-;  in the same workbook as the print-area has been defined)
    Peter Thornton

  • How to print an excel file (2010 version) with multiple tabs into a pdf file with bookmarks (acrobat 9). I was able to do this easily using excel (2007 version).

    Recently I got a new laptop, with excel 2010 version and acrobat 9 standard.
    I could no longer print (save as) an excel file with multiple tabs into a pdf file with bookmarks.
    My old computer has excel 2007 version and acrobat 9 standard.
    Print an excel file into pdf with bookmarks was a piece of cake.
    Both machine has the same add-in -- Acrobat PDFMaker Office COM addin
    Thanks if anyone could help me with this.
        Tom

    You need to upgrade Acrobat to a newer version.
    On Thu, Oct 30, 2014 at 4:12 PM, excel-pdf-bookmarks <

  • Can't open Excel 2007 workbooks on version 2003

    Hi,
    I saved a workbook using excel 2007 and now when someone using version 2003 try to open it, this error message appears: "Workbook format .xlsx is supported only from office excel 2007 version".
    Does anyone know how to fix this without having to install office 2007?
    Thanks in advance.
    Best regards,
    Rogério

    Hi again,
    I tried your advice and I get a new error message saying "The workbook is corrupt and cannot be loaded"..
    Any other sugestions???? :s
    Thanks!
    BR,
    Rogério

  • Where can i download Essbase addin 9.3.1 version for Excel-2003???

    H,
    Where can i download Essbase addin 9.3.1 version for Excel-2003???
    Please advise

    Thanks for your reply...i had the client software also...
    In general what procedure do we follow while installing the Essbase into PC?
    I have installed Client software 1st and searched for MS office 2003 and installed...
    when i go to Tools->addins->hypeionanalyticservices->bin->there is no addin ...
    please suggest me...is that right way to install the client software before installing the MSoffice??
    or else
    do i need to follow the below steps??
    In Excel 2003
    * Go to File -> Open….
    * Navigate to <drive>:\Hyperion\AnalyticServices\client\sample.
    * Open Esstoolb.xls file.
    * Now the Essbase toolbar is shown.
    Regards,
    Prabhas..

  • Excel 2007 Support for versions prior to BPC 5.1

    Hi,
    Will versions prior to BPC 5.1 support Excel 2007?  Specifically 4.0, 4.1, and 4.2?
    Thanks,
    Mike Lantz

    4.0 & 4.1 would not have been tested and certified on 2007 as they were relased before Jan 2005.  As of 4.2 SP3 (released April 2006) the supported Excel versions are listed in the release notes as:
    Excel 2000 SR1 or later
    Excel 2002 (XP)
    Excel 2003 or later

  • Problems with Excel 2007 and Essbase 6.5

    Hi,
    Two quick questions:
    1. We are planning to upgrade our office to 2007, XP professional SP2 but still going to use Essbase excel add-in 6.5 for some users and Essbase 7.3 add-in for others. Has anyone faced any problems with this combination?
    2. The only problem I encountered so far was when I double click a member name for retrieval, the pointer (cursor/icon) flickers / flashes continuously. But when I take the pointer out of the excel spreadsheet, the flicker goes away. Does anyone know a fix to this. Thanks.

    Hi,
    I'm admin of an hyperion essbase database.
    I'm testing our addin 6.5.1 with excel 2007.
    First problem evocated on retrieve is confirmed.
    I continue my test and tell you if i find another problem.
    What i would say is that old version can be unsupported but i'm sure we can use this addin on excel 2007, i hope.
    Regards.
    Edited by: user9947793 on 4 sept. 2009 08:56

  • Vista, Excel 2007 and Essbase 9.2.0.3

    hi <BR><BR>I am trying to install Essbase Analytics on my Vista Home Premium machine with OFFICE 2007. It is not listed as a supported excel version. I want to find out if it is compatible or if I have to install a version of office which is supported by Hyperion?<BR><BR>Thanks

    <BR>Hyperion has not yet shipped a version of their products that is supported on either Vista or Excel 2007. Note: our Dodeca product is, as far as I know, the only Essbase client software that is supported on Windows Vista.<BR><BR>Tim<BR><BR><BR>

  • HFM Smartview 7.2.1.1 with Excel 2007

    Hi,
    We are using the following Versions:
    Hyperion Smartview 7.2.1.1
    Hyperion Financial Management 4.0.1
    Microsoft Excel 2007
    When we try to retrive the data from Excel 2007 with 80 tabs, we are getting blank values around after 20 mins.
    Sometimes, we are getting the values and sometimes we are getting the blank values.
    Is there a compatibility issue between these versions of HFM with Office Excel 2007.
    Is there any way to get the values instead of blanks.
    Thanks in Advance.
    Regards,
    Hari

    Hi Hari,
    I am not completely certain, but have a good feeling that this is a compatibility issue. I just checked the Supported Platforms Matrices:
    http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
    The site doesn't have version 7 documentation, but the oldest version, 9.2., is not compatible with Office 2007. The earliest version that 9.2 is compatible with is Office 2003.
    I'd wait and see if you will get more responses here, but I'd also check with Oracle.
    Cheers,
    Mehmet

  • Bring Excel 2007 to the front when called from LabView v9 in Windows 7

    I am building a duplicate system using Windows 7, LabView v9 and Excel v2007.  The original system used WinXP, Excel 2007 and LabView v8.6.  The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible.  This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front.  The icon blinks in the Win7 taskbar and when selected displays over LabView.  If I minimize the Labview window, Excel is there.  This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar.  The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode.  At the customers request, the new system uses the .xlsm extension on the Excel template files.  I have tried using application.visible = True in the macro as well.  Could be a setting in Labview?  Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview. 
    HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
    Thank you in advance
    Stephen
    Solved!
    Go to Solution.

    I will try the windowstate change.  Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls? 
    I am not sure about the API since the discussion there is with regard to DDE.  (Taken from the link document:  If you want to call a DLL that contains ActiveX
    objects, use the Automation
    Open VI with the Property
    Node and the Invoke
    Node.).  I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be.  Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work?  I may be trying this already but in Excel through the use of the macro I call from LabView.  It contains application.visible = True at the beginning before reading files and plotting data.  
    I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro.  The puzzle for me is the blinking Excel icon in the task bar.  This means active and running but not visible or something wrong as well.  There are a few #VALUE cells if not all test in the system are run.  Again not a problem in Excel 2007-WinXP-LV8.6
    Thank you again one and all.

  • ADI and Excel 2007 compatibility

    Hi everyone,
    Do you know if ADI 7.2.0.09.12 is compatible with Excel 2007?
    The users here at office have Excel 2007 and when trying to use ADI, the system gets hung.
    Thanks in advance,
    Jose

    ADI release 7.2.10 (Patch 6455020) is certified with Microsoft Office 2007
    For more details, please refer to:
    [Note: 443515.1 - Is ADI Certified With Microsoft Office 2007?|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443515.1]
    [Note: 434917.1 - Is There a Version of ADI That is Compatible With Office 2007?|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=434917.1]
    For Web ADI, refer to:
    [Note: 466229.1 - Are there Web ADI Viewers available that are compatible with Microsoft Excel and Word 2007|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466229.1]

Maybe you are looking for