Compatible decks for cs3 windows? no device control ...

I recently purchased for my department (after much research, I thought) two dvd/dv decks for use with Premiere CS3...see below
JVC SR-DVM600EU 3-in-1 Digital Video Recorder
http://www.creativevideo.co.uk/public/view_item_cat.php?catalogue_number=jvc_sr-dvm600eu
I have Vista and my colleague has XP so it was a chance to see if they'd work on both.
My research told me they'd work with any NLE but on both machines it asked for a A/VC tuner driver which was not supplied by manufacturer and the JVC help was non -existant.
So with the fun prospect of sending these decks back.. I have to find something else that is compatible. Here is all I could find that Adobe say but this is quite old..
http://www.adobe.com/products/premiere/decks.html
Does any one know anything that may help me purchase something????!
We cant continue to use cameras to capture or the avc converter to capture from DVD as it is making our rubbish cameras even rubbisher!
I would appreciate any help or advice from people who have attempted the same....

Does premiere cs3 supports these no matter what the operating system?
If so I may well invest..
Also is there a method simliar for device control when capturing from dvd? or any combined dv/dvd systems at all...this would be V useful. OR
Should I stick to the avc converter and use the software plug in like Pipeline ProVTR for this? Does that work for DVD players etc
Any advice would be appreciated
Thanks
Clare

Similar Messages

PPRO CS3 RS-422a device control?

Hello everyone,
     I'm attempting to capture within Premiere Pro CS3 from a Panasonic AJ-HD130DC DVCPRO HD deck. The manual states that the deck is RS-422a compatible and we've been successfully capturing from this deck using machine control with our Velocity HD system for quite some time so I know it should work.
     I've called adobe support, and after some time they simply told me to 'reinstall premiere'. This seems ridiculous.
     I'm on an HP xw8600 workstation using the single COM1 port on the motherboard directly connected to the Panasonic deck. I've gone through the 'device control' settings in premiere and set it as follows:
Protocol - Panasonic RS-422
Port - COM1
Time Source - LTC (only option)
Time Base - 59.94/60fps
     This configuration gets rid or the "Device Control Error: No Communications with VTR" warning, so I know it's doing something. But it still doesn't control the deck.
     I've looked into changing some of the settings on the COM1 port in Windows XP64 device manager, but I'm not sure of what it should be and left it default.
     Any ideas, thoughts or experience with this would be greatly appreciated. This is a rather popular broadcast DVCPRO HD deck and it seems that premiere MUST be capable of communicating with it... that's what the "PRO" stands for right?
     Thank you.

Since the computer's COM port is RS232, you'll need to convert that to RS422 as well as accommodate the connector genders at each end. The Addenda RS-2/3R cable does this in one neat package. See at www.addenda.com.
Bruce

Window title and borders for Render Window (3D Picture Control)

Hi all,
some more questions on the 3D picture control.
I use the external render window, because in the solarsystem.vi demo, the 3d picture control appears to be very slow. The render window is much faster there. (I haven't tried it for my application though.)
I'd like to display a full screen 3D animation. How the hell do I get rid of the window title bar (I can set it to empty, but the bar itself remains), and the borders of the render window?
Regards
Matthias

The update speed of the solarsystem example is 2 ms (in the timeout event). This would result in 500 updates per second, witch is totally redundant. Put it on 33 ms, and you'll still get smooth updates, and much better performance! No monitor will update 500 times a second, and your eye can only see 25-30 frames per second anyway.
With this, you could probably use the normal 3d control (indicator actually). The window doesn't have any way to remove the title bar.
(You can do some things with window API's, but removing the titlebar is only possible by creating a new class, a new window, and then it would be impossible to tell LabVIEW to use this window...)
If you'd make the render window full screen, how would you close your application? There is no way (or I'm missing it) to get events back from the render window.
Regards,
Wiebe.

Support for Windows CE devices with StrongArm

Will there be support for the Windows CE devices with the StrongArm processor (like the Compaq iPaq) in Oracle Lite?
Peter Bakker

Which version of Oracle Lite are you on ?
You must be talking about a Windows Mobile 5.0
device. If yes, then Oracle Lite 10.2.0.2.0 and later
should work on that.I appreciate your help Vino on my issue.
You're right, i meant a windows mobile 5.0 device. What i'm confused about is that, i have oracle lite 10g Release 2 installed on my machine however i don't find in the cabinet packages an installer for windows mobile 5.0 device. Should i use the cab file for SDK420? or there is a specific cab file for windows mobile 5.0?
One last question. Do we have two version of Oracle lite 10g Release 2 (one is 10.2.0.1.0 and the other is 10.2.0.2.0)?
Again thanks a lot Vino :)

Thinking about selling Iphone 5 for new WIndows Phone

So I am a new Iphone 5 user. Went from a Motorola Droid to an Apple product. I must say I like the Iphone 5, but I like the new windows phone. I have even thought about selling my Iphone 5 to get the Windows phone. ANyone have any thoughts about the windows phones compared the the Iphone 5?

As a past user of an iPhone 4 and a Windows Phone 7.5 device, I would say that the user experiences are similar, with the exception of far fewer apps being available for Windows Phone. However, there are several apps available and I could find a livable level of satisfaction with the app selection. There are fewer accessories available for any Windows Phone device (or any other phone, for that matter) than for the iPhone. One thing that I think that has changed for Windows Phone 8 is that users will no longer sync through Zune on the PC. I'm not up-to-speed with this part, so if this is important to you, you might want to research this further.
The other thing that may impact your user experience would be how integrated into Apple's ecosystem you are. Even though you said that you just got the iPhone 5, I don't know if you are an iPad or iPod user that relied on iTunes for content management. Your other ecosystem concerns would include whether or not you use iCloud for media storage and whether or not your friends send you text messages in iMessage. If none of these things are big deals for you, then a switch to a different mobile OS may be fine.
Your other differences are your hardware differences. You didn't name a specific Windows Phone device, but I think that every Windows Phone that is coming out is larger than an iPhone 5. Were you attracted to the thin and light profile of the iPhone 5, or did you think that the screen was too small? The cameras on the iPhone 5 and the upcoming Windows Phone devices are said to rival each other, so that probably won't be a major consideration for you.
There are many other things to consider, but hopefully my questions will remind you of what you consider to be important, and you can go from there. I always recommend hands-on time with a new device that you are considering, so go to stores to try out Windows Phone devices to get more of a feel for them.

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

If the site has been optimised for IE (which is non-standards compliant), the best you can try is to spoof IE from Safari.
I'm using an earlier version of Safari than you, so I hope Allan or someone will correct me if the procedure is different.
First, go to Safari Preferences and enable the developer menu;
Then go to the menu and select User Agent - choose a flavour of IE.
Works about 50% of the time.
It won't work if the site is using Activex controls.

How do I load CD for CS3 in new windows 8 computer? It wants Adobe PDF.dll file ??

How do I install my CD for cs3 in a new windows 8 computer? It wants Adobe PDF.dll file?? Do I need a new serial number?

no, your serial will work on all compatible win os'es.
download the installation files if you have a cd problem,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

WDM upper filter for "Windows Portable Devices" device class

Hi folks,
I have a WDM filter driver, based on WDK toaster sample, that I am using to filter portable devices (mainly Phones), as upper filter. During AddDevice phase, I am querying device properties (such Description, Manufacturer and so on) and then attaching
to device. I can see the IRP_MN_START_DEVICE, which I send down to next lower driver after setting a completion routine.
This is working fine on most of the machines I am testing on, but on some systems (every XP and some Windows 7 and Server 2008), when I send the IRP_MN_START_DEVICE down to next driver, I get a STATUS_DEVICE_CONFIGURATION_ERROR, so this is preventing the
device from being installed in the first place.
I have managed to overcome this error by editing the hardware ID registry key for the device and creating "UpperDriverOk" and "KernelModeClientPolicy" values, setting them to 1.
This way the device starts without issues and I can filter it as normal.
Now, I am aware of Portable Devices being managed by an UMDF driver, but does that explains the issue with Start Device phase?
I haven't found any differences between those systems with the issue and those that are working fine without needing the "registry values" workaround.
Is there any system setting or service configuration that might be helping (or ruining) this filtering scenario?
Would it be possible to apply the "KernelModeClientPolicy" workaround for the whole system and not separately for every single Phone device?
Thanks a lot in advance!

Hi Kumar, thanks for your response.
By "inbox WPD driver" you mean the 3rd party driver that controls the WPD device, right?
Is that policy mandatory? Because when I plug my Nokia Lumia 520, I don't see that value set in registry.
Anyway, what I would like to know is, why is IRP_MN_START_DEVICE failing in Server 2008, and working fine in Windows 7, with the same device and the same WDM filter?
Thanks!

Device Control Capture from Beta SP Deck into a G-4, Using Firewire ???

Hello,
I have been told by many people that it is possible to capture video with device control from a Beta SP deck, if you have the correct setup. But no one seems to be able to tell me exactly how using a G-4 Dual 1.25, or G-5 single processor computer. What I'm hoping to do is establish a serial interface that will allow for device control from a RS-422 circumstance. I'm hoping that I can do this, and still capture using DV- I don't want to have to resort to using a video capture card, for an assortment of reasons that I won't get into.
Question: Is there anyone out there converting video from a beta sp deck to firewire in FCP, using device control, and if so, what is your set up?
Thanks!
Stuart Baker

ProAppTips is your friend:
How to get BetaSP footage into FCP without a capture card
Patrick

Need confirmation on Windows Mobile Device compatibility for Fiori

Hello Experts,
Can you please confirm if SAP Fiori application is compatible in Windows Mobile OS 7.X/8/X devices? In http://service.sap.com/sap/support/notes/1935915 , I am not seeing any mention about Windows Mobile Devices. We need to know if SAP Fiori application can be run in any browser in windows mobile devices and if there SAP Fiori client in available in Windows App Store. Please help us in getting this information.
Thanks,
Diptanu
Tags edited by: Michael Appleby

Hello Krishna,
Thanks for the prompt response. So, after seeing the comments, should I come to a conclusion, as of now Fiori is not supported on Windows Mobile Devices and if my understanding is correct, are you aware of any tentative timeframe when we can expect Windows Mobile device compatibility for Fiori? The reason is we are looking for a customized Fiori application for Windows Mobile Device, and was looking to check Fiori compatibility for the same.
Regards!
Diptanu
******* I have copied the snippet from the blog you shared to validate if I am looking at the right place ******************
John Wargo 09-May-2014 16:35 (in response to Pekka Korsoff)
Right now, the SAP Fiori Client appliction doesn't work with SMP. With SMP 3 SP03 which was released last week (Ramp-up customers only, sorry), there is an updated proxy that supports Fiori access from a Kapsel application (the application would need to onboard with SMP and that's not supported with the Fiori Client today).
The next release of the Fiori Client will have support for SMP and more. Next on my todo list is a blog post that talks about SMP and Fiori. You should find all of your questions answered there. Expect it next week.
Yes, we plan on supporting Windows 8.1. Right now, Cordova on Windows 8.1 doesn't support some of the things Fiori Client does. We're working with the Fiori team, the Cordova dev team and Microsoft to work through all of those issues. No definitive timeline, but it is something we want to support

How can I set-up my mac mini server to be a central file server for my windows boxes (they don't see the mac on the network), and how do I set-up a central iTunes server so that all my devices sync to the mac mini?

I am looking for step by step instructions to configure my mac mini server to support the following:
1. Central itunes server for all my devices (ipad, ipod, iphone, etc.)
2. Central file server so that my windows devices can save and retrieve data from the central system (the mac does not show up in the network for the windows systems - all running windows XP or 7)
Thanks,
Keith

You will need to enable file sharing in System Preferences
as well as setting up sharing and permissions for the
directories that you want shared. You may also want to
setup a non-administrative user or allow limited guest
access. The user would require entering a user name and
password to make the connection, but would allow remotes
to change files, if set up tat way.
As for serving iTunes media, better to post in the iTunes forum.

Are they ever gonna make a version of Itunes for windows mobile devices

I bought the Moto Q, great phone/pda/mp3 player. Does all I need to do in just one piece of electronics that fits conveniently on my hip. No,I do not work for Motorola, but I like this phone. My issue is, I have purchases from the Itunes store that I would love to tranfer to this mobile device with out having to take it to the hospital for same day surgery. I know, I can rip multiple audio cds of my music then tranfer them to my laptop (which I use for syncing my mobile device), use software to convert them from audio files to mp3s or wma then copy and paste them to my Moto Q. WAY TOO MUCH HASSLE!
I like using Itunes as my place to purchase new music but I may have to go to a site that will sell me wma files i can play on my Q. My Q runs windows media center for mobile devices so it will play MP3, WMA and i think unprotected AAC files but the protected AAC files on my tower will not play after being copied to the memory card.
Just because they don't make a phone/pda/mp3 player for apple that rocks, do I have to STOP BUYING MY MUSIC AT THE ITUNES STORE, and start buying them thru microsoft????

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

How to get Cumulative Update packages for SQL Server Compact v3.5 SP2 for use on a Windows Mobile device

There are links on the pages for various Cummulative Updates for SQL Compact v3.5 SP2 which look to relate to the desktop version, but are these also available for Windows Mobile devices? If so, what is the process to get hold of them?
We are seeing intermittent problems with corrupted databases on devices which are using SQL Compact v3.5 SP2 and have seen that some of the Cumulative Updates do relate to corruption and would like to see if these can help to solve the issue.

Just select the KB article, at the top of each there is a link to request a hotfix, you will then get a email with a download link. The 8088 and 8109 hotfixes also apply to Windows Mobile.
http://erikej.blogspot.dk/2010/08/sql-server-compact-35-sp2-downloadable.html
Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Compatible decks for cs3 windows? no device control ...

Similar Messages

Maybe you are looking for