Compatible list for VGA connection

Since the list theMagius is collecting only deals with DVI compatible monitors I was wondering if anyone is interested in a similar list, but for people with VGA monitors?
if so, I volunteer to make a simple PHP page where people can fill out their monitor brand and model, along with comments and which mini model it was tried on.
what do you guys think?

I already made a thread asking about VGA monitor compatibility list...
http://discussions.info.apple.com/webx?128@@.68bccda5

Similar Messages

When replying to an add on Craig's List, for example, it goes back to my old email address I had with IE, and fails to connect with the ad's author and I'd like to know how to make it use my gmail address with Firefox instead.

When replying to an ad, via email, posted on Craig's List , for example, it attempts to use my old email address I had with IE, then fails to connect with the ad's author. How do I get it to only use my gmail address with Firefox?
== This happened ==
Every time Firefox opened

See https://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

DVI or VGA Connection For Sharp Aquos??

I've got an older Sharp Aquos, specifically the LC37G4U. Previously owned a Mini G4, 1.42 GHZ. The best I could do imagewise was with a DVI connection and the Aquos and Mini set to 1280 x 768. This resulted in an image cropping of approximately 1/2 inch on the right and left sides of the screen. I lived with it for a few years. I recently upgraded with a sweet Mini Duo Core 1.83 GHZ, 2 Gig of RAM, 7,500 RPM Seagate HD, etc. The computer is great, but with the DVI connection, it appears to default to the old 1280 x 768 setting, with the same exact image cropping. The maximum resolution on the LCD is 1366 X 768, and I'd like to attempt to do better as far as the cropping goes. Has anyone out there tried the VGA connection alternative? Or if anyone has any ideas, I would be forever in your debt. Thanks All!
Mac MIni Duo Core 1.83Ghz, 2 gig, etc. Mac OS X (10.4.9)

I have a sharp lcd tv as well, and as far as I know, if you connect the mini to it using DVI (you shouldn't really use anything else) the mini will default to the tv's resolution. I swap my mini from monitor to tele depending on what I'm using it for, and everytime it automatically fixes it's display settings to match whatever is connected to it. Hopefully this is the case for you too, try it out.

External VGA connection for N80

Hi,
I need an external vga connection for my N80 to make presentations using a projector.
Any ideas, Nokia or 3rd party products are all welcome.
Thx, ML.

I think jive is used in webcenter discussions?
You may have the wrong forum... this is for Webcenter Interaction Products.
For help with Webcenter Discussion, blogs, and wiki's (part of webcenter services), you want to ask your question here:
http://forums.oracle.com/forums/forum.jspa?forumID=733

I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
Thanks
Pheona

Greetings Pheona,
That appears to be a hard drive based camecorder. Usually these mount on the desktop of your computer as a little white hard drive icon. If you go inside you should be able to find the movie files the camera is saving. See what format they are (the last 3 letters at the end of the file name is a good place to start).
You can drag the movie files from the camera hard drive to the computer to copy them. Then convert them with a video file conversion program to a format iMovie can understand.
Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4". Then import the resulting file into iMovie and see if that works any better.
If that program can't convert the files you can try another file conversion program:
http://www.southpolesoftware.com/iVI/iVI.php
http://shedworx.com/voltaichd
http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
Hope that helps.

I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!

I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!

Unless the iPhone was purchased as unlocked very recently directly from an Apple Store (the only place in the US where unlocked iPhones are sold, and then only since June), which from the symptoms I doubt is the case, then it was locked to AT&T and jailbroken to make it work with an Irish cell carrier. Updating the operating system has now relocked the iPhone back to AT&T.
Only the cell carrier can institute an official unlock, one which will hold across updates of the operating system, and AT&T will not do so for any reason. All we can advise here is that you return the iPhone to your uncle and purchase an iPhone there in Ireland.
Regards.

I Need a new list for Compatible Phones

Any one have a list for all compatible Phones, i like to use all isync aplications and i dont find a correct phone
Please help me, my company let me change the phone but i have 10 days only

Your cellphone company has quite a lot of iSync compatible phones:
http://www.clarochile.cl/interior/equipos/equipos2.php?cat=Sony%20Ericsson
Sony Ericsson C702, C902, K510, K550, K790, K850, S500, W200, W300, W350, W380, W580, W610, W760, W890, Z750
All those work with an iSync Plugin from here.
Plus there's some Nokia's, Samsung's and a couple of Motorola's.
Julian
Aluminium 20" iMac 2.4Ghz, 2GB RAM Mac OS X (10.5.5)
Apple Required Disclaimer: "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I can't find Samsung Admire SCH-R720 on either the supported or unsupported lists for Firefox for Android. The phone seems to meet the minimum specs, TI OMAP 3610 processor (ARM-A8) and 512K of memory. Marketplace says not compatible. If not, why?

Sorry, included details in question.

Is the TIOMAP 3610 not a 800 MHz ARM Cortex-A8 ? which is ARMv7. http://phonecpu.com/omap-3610
It does however only has 125MB or 196MB RAM or such depending on sources when 512+MB is recommended.
The Motorola Defy in compatible list has the TI OMAP3610-800 or TI OMAP36300-800 but it has 512MB Ram.

W520 Owners: Compatible Splitter for combo Headphone/ Microphone Port

The w520 has a combo Headphone/ Microphone Port. You can use either a headphone or a microphone but NOT both UNLESS you have a ...
1. Headset with special 3 ring jack such as
      a. ThinkPad In-Ear Headphones (#57Y4488)
      b. 3.5mm TRRS Plug type Headphones for Smartphones (e.g. iphones, etc.) -- so you use the same headphone/mic you use for your cellphones (but lesser sound quality)
2. Splitter - so you can you use your own microphone and your own headphone/ stereo speaker (for better sound quality)
This solution was found here...
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Where-is-the-Stereo-out-on-the-W520/ta-p/47306...
But a list of Compatible Splitters was not listed...
The aim of this thread is to verify and list compatible Splitter for W520 combo Headphone/ Microphone Port
The specs of the splitter are as follows: (Kindly verify if correct)
3.5mm (1/8") TRRS male plug (aka Smartphone plug) TO
3.5mm TRS Audio-Out Jack/ female plug AND 3.5mm Microphone-In Jack/ female plug
I browse online and found possible splitters. (In no particular order)
1. Sound Professionals Part# - SP-SMARTPHONE-CABLE
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-SMARTPHONE-CABLE
--it was mentioned in the details tab that it is compatible with " Lenovo T410, T410s, T510, X, L & Edge computers"
so it is possible that W520 is compatible if the other Lenovo have the same combo port
- nickel contacts
2. Headsetbuddy Gold PC Computer Headset to 3.5mm Smartphone Adapter (Part# 01-PC35-PH35G )
http://www.theheadsetbuddy.com/gold-pc-computer-headset-to-3-5mm-smartphone-adapter/
- it was mentioned "Convert two 3.5mm plugs to single smartphone 3.5mm headset plug (TRRS) with mic and audio"
   so it fits the specs but I am not sure if it was tested for W520...
- gold contacts.
3. Headsetbuddy Gold PC Headset to 3.5mm Smartphone Adapter (Part# PC35-PH35G )
http://www.theheadsetbuddy.com/gold-pc-computer-headset-to-3-5mm-smartphone-adapter-1/
- same description as above but different part#. I am not sure if this is the same product or just a typo error on their website.
-gold contacts
4. Headsetbuddy PC Computer Headset to 3.5mm Smartphone Adapter (Part#01-PC35-PH35 )
http://www.theheadsetbuddy.com/pc-computer-headset-to-3-5mm-smartphone-adapter/
- - it was mentioned "Convert two 3.5mm plugs to single smartphone 3.5mm headset plug (TRRS) with mic and audio"
   so it fits the specs but I am not sure if it was tested for W520...
- nickel contacts
5. KV Connection iPhone 1/8 inch microphone and headphone adapter - 3.5mm 4 conductor TRRS Male to 3.5mm TRS Jacks (Part# KM-IPHONE-2TRS)
http://www.kvconnection.com/product-p/km-iphone-2trs.htm
It was mentioned that they have "Premium shield coax a/v cable for EMI/RFI interference...DC blocking protection ... microphone impedance matching"
They say it will "work with most 3.5mm mono or stereo microphones except for for unpowered ECM (electret condenser mics). If your microphone is an ECM without batteries then this special version of the adapter KM-IPHONE-2TRS-ECM is the adapter you would need."
So I guess the the type of microphone will have an effect also on what splitter to get.
On this site..
http://www.wfu.edu/~yipcw/lenovo/2011/T420s/review/
It says that on using the Part# KM-IPHONE-2TRS, with a "mono mic [Sony F-V410 cardioid imp 600 Ω vocal] in , it reverts to internal microphone for some reason.) and headphone"
So there can be incompatible mics for any splitter you use... OR is the defective splitter or the computer setting that is wrong...???
-nickel contact
6. KV Connection iPhone 1/8 inch electret condenser microphone and headphone adapter - 3.5mm 4 conductor TRRS Male to 3.5mm TRS Jacks (Part#KM-IPHONE-2TRS-ECM)
http://www.kvconnection.com/product-p/km-iphone-2trs-ecm.htm
-On site it says "This adapter is specifically for unpowered ECM (electret condenser mics). If your microphone is an ECM with batteries then the standard adapter, KM-IPHONE-2TRS is the adapter you would need."
-nickel contacts
7. eVerbatim splitter
http://www.everbatim.net/store/index.php/hardware/microphones-audio/headphone-microphone-jack-splitt...
- It says "This adapter has been designed and tested to work with all current Lenovo ThinkPad computers with a combined audio (VOIP) jack running Windows 7. Some ThinkPads that have the combined jack and that are running XP do not work with the adapter, which is a software issue and not a defect of the adapter. "
-nickel contacts
8. Startech 3.5mm 4 Pin to 2x 3 Pin 3.5mm Headset Splitter Adapter - M/F (Part# MUYHSMFF)
http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Pin-to-2x-3-Pin-35mm-Headset-Splitter...
It says "allowing you to add a mono microphone input as well as a stereo output to your PC or Laptop, through a single 3.5mm audio port."
-nickel contacts
Kindly tell if you have used any of this on your laptop. And tell...
1. Compatible with your headphone? (what kind you use)
2. Compatible with your microphone? (what kind you use)
3. Any problems with sound?
I hope we can continue this thread to list the compatible splitters for the Lenovo Thinkpad W520... Please do add if you have seen other brands.
Thanks

Hi all
To be frank, some of the multimedia laptops, with SRS Premium Sound, etc. are having the same speakers as W510 / W520 and is very loud (AFAIK, Dell Inspiron N5110 have the same speakers as W520 and the placement is just below the palmrest like surround sound). Theoretically, it makes the sound less focus and soft, but it works well with that laptop.
The Mic and Speakers are powered by the amp / drivers. The hardware in fact is very good, the only problem with it is the driver / software not well written. Good Hardware + Bad Software = Bad Product.
If you want a better sound / mic, you could try my Dolby Home Theater v4 solutions, hopefully it could meet more than your expectations and solve your problems without any cost. In fact, Dolby GUI is more customizable than Conexant. Most of us would not think it's more complicated, as techies would prefers more options to have fun.
1. I don't even need a external mic, an internal mic does the job with this fix.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-bad-microphone-Usable/m-p/528497
2. Dolby makes the sound much better and louder with correct settings. If not, my post are not able to stay active till now, reaching 100+ posts.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Sound-Enhancement-Thread/td-p/442761/pag...
Installation steps:
Simplifications of installing and optimizing Dolby Home Theater v4 threads. Message 77 and 78 + Attachment.
3. Get a USB solution only if you need multichannel audio, stereo / wave mix or studio grade quality, if you are just using for entertainment, etc. W520 with Dolby Home Theater v4 should be more than sufficient.
Cheers
Peter
=============================================
Does someone post helps you? Give them a kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Refunded Set: W510, 4876-A11
Current Set: W520, 4284-A99
Dolby Home Theater v4!:
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Sound-Enhancement-Thread/m-p/451401#M155...

What's a DVI-to-VGA connection have to do with sleep?

I've been experimenting with hooking my HDTV to my Mac Pro's 5870 video card. Currently I have my 27" ACD connected to one of the mini displayports (mDP) and a VGA, connected through an Apple VGA-to-mDP (active) adapter to the other mDP. When I want to use the TV I can connect the HDTV to the 5870's DVI connection with a (passive) HDMI-to-DVI adapter. It works. Indeed it works too well! Whether the TV is taking input from the computer or not the computer thinks the TV is a third monitor which can get very confusing when the mouse is accidentally moved off my ACD on to the TV (6 feet away) and I can't find the cursor. Another minor nit is that using the DVI means no audio can be passed on the HDMI so the computer speakers are used unless of course I hook up a separate audio connection.
I could get around the 3-monitor problem using SwitchResX but I prefer not to. I'm willing to simply manually connect and disconnect the HDMI cable on those few times I want stream stuff to the TV. But as an alternative I tried switching the TV and VGA connections, i.e., connect the TV to the mDP through a (passive) mDP-to-HDMI adapter and the VGA through a (passive) VGA-to-DVI adapter.
This second scheme also works. However because all the adapters are now passive the VGA will disconnect when the HDMI is plugged in. Ok. I can live with that and I understand the behavior due to the 3-monitor limitations of the 5xxx cards (i.e., active adapters required).
All the above was just background and context leading to the question I entitled this post with. Forget the HDMI connection. I have the ACD connected to its mDP and the VGA through the passive VGA-to-DVI adapter (i.e., the second scheme I described above). With this configuration my machine will not sleep on its own (i.e., at the time the energy saver specifies). I can "manually" put it to sleep ("Sleep" from the Apple menu). It just won't do it on its own (and none of the checkboxes in energy saver are checked -- wake for network for example -- and no active processes are running that would explain this behavior either).
Experimentation has shown that it is somehow related to using the VGA through the DVI. If I put my original configuration back (VGA-to-mDP) the machine will sleep on its own at the designated energy saver preference time.
What I don't understand is what's a DVI connection have to do with the energy saver sleep setting? The only remote possibility I can think of is perhaps the screen saver is running on both the VGA and ACD and an active VGA is sufficient to make the machine think there's activity when connected through the DVI (but not when connected through the mDP).
Of course none of this is really a serious problem. I'm only asking for academic interest.

I know I can do that but that's not the subject of this thread! I'm only asking why would a VGA connection to DVI keeps the computer from sleeping on its own.
And, oh, by the way, another audio alternative is something like this,
http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=5279
although this requires stringing a separate audio cable.

My MBP Retina doesn't allow the use of two Thunderbolt to DVI adapters. It only works with one TB - VGA adapter and one TB - DVI adapter. However now the color on the VGA connected monitor is slightly different.

The monitors are Viewsonic VA2406m-LED. The Display preferences show all three monitors but one monitor always says "No Signal" if they are both connected TB -> DVI.
The Color on the VGA connected one is slighly off. It seems like I should be able to connect two DVI monitors not sure why this is stopped. Does it have something to do with the Graphics card?

The problem was with the newEgg adapter. I just went to the Apple Store and bought an Apple adapter and the monitor now displays correctly.
For future reference, in case anyone experiences this problem:
the newEgg adapter is part number 9SIA1PU0P88920, described as a Thunderbolt Mini Displayporrt Display Port DP to DVI Adapter for APPLE Macbook Pro Air and the full description says it works for macbook pro, etc.
when this adapter is used, the macbook pro recognizes the monitor, but the monitor displays nothing.
When the apple adapter (MB507Z/B Mini Display Port to DVI Adapater) is used, the monitor displays correctly.
Of course, the individual newEgg part might simply be defective, but I doubt it. moral -- spend the extra $$ and buy the Apple adapter.

Re:Error while updating Warehouse List for the items in DTW..!!!

Dear SAP Members,
We have transferred the items through DTW but while updating the warehouse list for the items.i got a error message like this:
No. Status Key Reason
1 Updatefailed ItemCode cannot find this object in B1-application defined or object defined error65171
How to resolve this issue.It shows error for 600 records.It is very dfficult to enter manually.Help me on this issue.
With Regards,
Revathy

Hi Revathy,
I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
If it is one time effort you may just map them manually.
I hope I am making sense to you.
If you want us to try it out, give the name of the template, the content in the template may be few lines.

AnyConnect: No Address Available for SVC Connection on Cisco ASA 5505

Get Error
The secure gateway has rejected the connection attempt. A new connection attempt to the same or another secure gateway is needed, which requires re-authentication. The follow message was received from the secure gateway: No address available for SVC connection.
ip local pool VPN 192.168.250.50-192.168.250.60 mask 255.255.255.0
tunnel-group SSL type remote-access
tunnel-group SSL general-attributes
address-pool VPN
tunnel-group Any-Connect type remote-access
tunnel-group Any-Connect general-attributes
address-pool VPN
I have a VPN pool
I can make a clientless SSL connection

Hi,
Maybe you are not falling into that tunnel-group SSL? By default, you will fall into the DefaultWebvpnGroup unless you choose the TG via a dropdown or directly access the group via a groupurl.
Example: When no 'tunnel-group-list' or 'group-url' is configured:
Accessing https:// will take you to DefaultWebvpnGroup.
When 'tunnel-group-list enable' is configured under webvpn, you will get a dropdown of tunnel-groups to choose from [provided you have an alias defined for the group]
When group-url is configured for a particular TG, say https:///test , on accessing that URL, you are taken to that group directly.
So basically, you would need to check which group you are hitting. Running 'debug webvpn 255' should also show you this.
Thanks
Rahul

What's on your wish list for the NIke+ sportkit?

Here's my wish list so far. What's on your wish list for the Nike+ Nano sportkit? (Already sent to Apple and Nike+ feedback so please don't tell me to do that. Apple & Nike+ do read the forum. )
Nike+:
I would like to see:
-- a date on the start of my goals (rather than just "you have 16 days to go").
--previous goal start and end dates (I have completed goals in half the time I gave myself but it doesn't show that)
--MOST IMPORTANT--some way to show improvement in pace (or distance, or time). At the moment you don't see what your previous cumulative pace was. You don't even know whether it's getting better or worse. You have to guess on the basis of looking back at each individual run.
--a simple, foolproof way to re-upload run data to Nike+
Nano:
I would like to see:
--a two-step way to end a run, rather the current four step Pause> Menu> spin the dial>End
--since the sensor obviously records steps (you can see step count in the xml file), let the users see that step count in their totals and upload the steps data to Nike+

- support for podcast playing as well as typical control of now playing - the ability to move the item playing back if you miss something (say, while listening to a podcast or audiobook). I like to catch up on my podcasts while I run, then listen to music at the end of the run. I am kludging my way through with playlists right now, one for each day, but I'd really rather not. Really there should be a "Music" menu option so that you could choose to listen to an artist or an album or a genre - your choice - rather than just a playlist or shuffle songs.
- support for other shoes, even legacy Nike shoes, perhaps with a rigid arch support insole or something that you can slip in that has a pocket for the sensor? I realize that Nike is likely looking at this as a way to make people buy higher margin shoes, but I'd pay extra for a Nike branded insole like that, too.
- I agree with the option for a non-flash site.
- The ability to turn off the power song feature, or at least customize some of the features. I'd prefer a quick trip to the main menu with a press and hold, say, with a menu item on the end of the main menu to return to the workout data (sort of like the "Now Playing" menu item) so that I can change music selections, change backlight timing, whatever.
- I'd love to be able to access workout data on the PC without having to connect to the internet.
- If you are listening to a podcast or audiobook, I'd like the spoken announcements ("you have 10 minutes to go") to pause the playback rather than speak over it, or at least give me the option to do so.
I've only had it a week; I am sure that I will come up with more as I use it more.

23" Cinema Display and VGA connection ??

Hey all,
I have a VAIO S580 notebook and a 23" Apple Cinema Display. The VAIO uses a VGA connection to connect to external monitors. I have been looking for VGA to DVI adapters that would allow me connect my VAIO to my ACD. However, I could only find adapters that are DVI-I and DVI-A thus far. Will these adapters work for my setup?
TIA

Monoprice.com is another good site. I have a question for everyone. I have a Powermac G4 and 21" cinema display. I recently connected the computer to a tv via a DVI to HDMI cable. It worked fine for a few days. Now when I restart the screen freezes without a toolbar at the top of the screen or the dock. If I unplug the cable the screen goes blank for a second and both the toolbar and dock appear. Can someone help with this?

Compatible list for VGA connection

Similar Messages

Maybe you are looking for