Compatible problem in ZEN micro and ZEN micro ph

I have a ZEN micro already and want to buy a ZEN micro photo. Problem is that is the two accessories compatible? Can I use the former batteries and adaptor in the latter? Thanks a lot!

Yes, most if not all of the stuff should be compatible. But do note that the Zen Micro Photo battery has a higher capacity so it will last longer than the Zen Micro battery.

Similar Messages

  • Compatiblity problem with cs 5 and windows 8?

    Is there any compatibility problems with indesign cs 5 and windows 8? Its very choppy on my computer. Its a windows 8 laptop with 32 gb of ram and 2 tb disk space. It shouldn't be a problem with lack of resources. I was wondering if there is anything i can to to make it less choppy. Also the scroll bars on the side and bottom won't scroll I need to use the space bar which is fine but can be annoying at times. Sometimes the side menu boxes wouldn't work correctly sometimes they will. I tried to reinstall the program and it didn't change anything. I also tried using the windows troubleshooting where you can tell the computer to use old settings for older programs. Once in a while it'll also crash. Indesign works great on my windows 7 desktop. I didn't know if there was a preset or something that might help resolve the issues. I can use the program but I have to fight with it so much sometimes its not worth using on the laptop. thanks

    I didn't even try to install CS5 on Win 8. The only thing I have on my desktop and laptop is CS6.
    I did read someone having problems with scrollbars but that was on a Surface Pro tablet.
    Bob

  • Problems with zen micro

    Since getting my zen micro and transferring music via media player, some albums have been sorting tracks into alphabetical order. I made sure before copying that all tracks were in the right order and were being sorted by track.
    The Greenday album 'American Idiot' seems to go into alphabetical order very quickly. A few other albums have gone into alphabetical order a few days later. When i check the track details it always says 'Track #0'. Most albums are ok though. Should i try the creative software instead? I have the .02.05 (i think thats what its called) firmware. The battery also seems to be running out kinda quick. Less than 5 hours of whatever its meant to last for...

    This doesn't exactly qualify as a problem with the Micro. It's more of bad ID3 tag info in the files from the sounds of things. As for t he MPEG Layer 3 Audio thing. That is just what an MP3 is. What was being referenced is the TAG info for the track. Open the file in Media Source and then use the EDIT TAG option or whatever it is labeled. ( I don't have it in front of me) You should see information for things like Artist, Album, and TRACK. IF the track item is empty or has a 0 in it then that is waht you will end up with for track info. You would need to edit each track for proper info at this point.

  • Random Problems with Zen Micro? Try a diff. USB cable

    I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
    So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
    Hope this helps - I am (now) loving my new Micro!

    I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
    I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
    I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
    I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
    My old Zen Micro with the old, original firmware did NOT have this connectivity problem
    Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

  • Power and Sync problems with Zen Vision:M

    )Power and Sync problems with Zen Vision:MX Lately, my Vision M is having problems that when I plug it into the USB port on any PC to charge it, it lights up for a moment and then goes blank.
    When I unplug it and reseat the usb cable, nothing happens. When I try to turn it on, it's dead. This happens even though it's not fully depleted of battery energy.
    Pressing the reset button does not do anything. The only thing that I've found that will work is to open it up and unplug the battery. But even that is starting to not work.
    This doesn't happen every time I use it, but it is happening quite a bit. It's gotten to the point today that I can't even charge the battery at all.
    Any suggestions? I don't think it's the battery, as it does charge when I don't have these issues, but I'm not really positi've of that either.

    The connector on the motherboard check it . It may need to be resoldered. The last time I ran into those symptoms that was the solution.

  • Problems With Zen Touch Turn

    After just recently purchasing a Zen Touch in December 2005, I already have problems with it.
    I have never dropped it or hit it. I plugged it in to re-charge one day after using it and when it was done charging I turned it on, used it for 5 minutes then set it down. The next morning I went to turn it on to use it, and it wouldn't turn on. The blue light at the side on the power button was on, but the screen just wouldn't show up. Now the blue light won't turn off. I have read about these problems with Zen Micro freezing up and read about Zen Touch freezing up back in 2004 when it was released. I have phoned the number but couldn't seem to get through. Should I consider taking it in? Or is there an easier way?

    Have you tried resetting it's Connect to the mains adapter and press the tiny recessed button on the side of the player. Don't use anything sharp to press it, a bent paper clip is best.

  • Strange problem with Zen Style 300

    I got a Zen Style 300 for my birthday and it is given me some problems. I tried looking at this forum and on google, but so far haven't found anything like it. What happens is that during the sync process, some folders on my portable harddisk (which is where the music is located) get renamed into names with strange symbols and become unreadable. The strange thing is that it doesn't happen with all files and just as strange is that it does happen with files not related to the sync that are located in a completely different folder. You can imagine I got quite scared the first time, afraid of having lost my music collection, but on restart everything was fine again. Until I plugged in the ZEN again that is.
    My second problem is probably related to it. Part of the files transfered to the player don't show up when I try to listen to them with the player. When I check they have been copied to the player correctly, yet somehow they don't show up.
    I have Windows XP and tried syncing with the standard Creative software, MediaMonkey and iTunes but they all face the same problem. Although with the second problem it might happen that files copied one way don't show up, while the same files transfered with a different program do. All 3 cause the problem with my harddisk. I tried formatting the player and updating it. So anyone has any idea what might cause this?

    I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
    I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
    Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over.

  • Problem with ZEN Style M300

    When I trying to found bluetooth audio devices with ZEN Style M300,? the player get to freeze after a little bit time that is searching devices, and so I have to push the reset button for using again the player. :mansurprised:Anyone have the same problem?

    I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
    I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
    Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over.

  • Frozen problem of ZEN Stone p

    Hi all,
    I need your help with my ZEN Stone plus (2GB). It was bought last December. Recently, it always gets frozen?with the?showing of?"CREATIVE" letters?after I press the play button. I cannot get to?the menu. All the buttons lose their functions. I cannot even turn it off. In addition, my laptop doesn't recognize it'swhen I plug it into the USB portal.
    When I plug it into my laptop, the light for recharging is always on. It never flashes even if it is out of battery.
    I have?tried the "reset button". But it dosen't work at all. The same problem?repeats. Can anyone help me out? Thank you very much.

    $Re: Frozen problem of ZEN Stone plus Have the same basic problem, slightly different symptoms.
    Had just recharged my 2GB player (w/speaker) and added some songs and a podcast not half an hour before.
    Was playing songs one at a time but got distracted. When I went to choose the next song pressed the button up top to bring the screen up. It came up but then winked out. Figured it timed out so I turned it back on again.
    Showed the Creative screen, got to the "Zen Stone" screen and then just sat there and sat there. After what seemed like forever got onto the website and followed the directions about rebooting and restarted it. Same thing. Tried it again. No luck.
    Thought to hook it up to the computer to see if that made a difference. The player came on automatically but stil stalled. And? the computer doesn't recognize it. No icon of any kind, nothing in "Safely Remove Hardware" or a sign of it anywhere else. Even opened Creative Media Lite and it says there's no player connected. So I've hit reboot and have left it turned off.
    Thought about letting the battery run down but since I can't be certain it will recharge even though it lights up when connected to the USB - and there could be a solution but only if it has power - I'm not going to do that. There's nothing specific I can find in the Troubleshooting about "frozen log in".AND "computer won't recognize".
    I don't care about the files. But I haven't had a moment of trouble from it until this happened - no computer interface issues, battery life problems, nothing. I love this little thing. People are always asking me about it when they see it clipped to my shirt collar when I'm out. Haven't had it long and can't afford to replace it right now.
    Really hoping that it's something fixable.

  • Two problems with Zen Vision: M

    Hi all. I'll give my player's specs before describing the problem(s):Zen Vision: M 30 GBVersion .40.02 Anyway, I've had my Zen for about 4 months now, and up until now, it's worked perfectly. Recently, for the first time, it froze on me. I figure it was because I was shuffling through songs on random too quickly, as I see other people have had this problem too. So I reset the player, but it only rebuilt halfway; on the "Rebuilding" screen, the green line stops about halfway through. Now, whereas I once had about 2600 songs I'm down to a little over 000. I didn't think it was that big of a problem; I've either got all my songs backed up on my computer or CD. But when I connected the Zen to my computer, my computer couldn't read the device. Sort of, that is. My Zen can still charge through my computer and when I plug it into the computer, a message will pop up asking me what I'd like to do with the MP3 device. However, when I go to Zen Vision: M Series Media Explorer, I get the message "Your player is not connected. Please connect your Zen Vision: M Series to the computer." I went through the FAQ at the top of the message board and tried basically every solution outside of trying the Zen on another computer. I'm thinking it's a problem with the player, not my computer. It still acts erratically at times- like, if I leave it off for an extended amount of time and turn it on, it'll go into rebuilding mode. Other than that, though, it's fine. Could the hard dri've be corrupted Any help would be appreciated.

    I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

  • Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

    I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
    ?Message Edited by studandydon on 07-29-20070:38 AM

    I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

  • Problem with Zen Xt

    I purchased a refurbished Zen Xtra back in May and had the player lock up on several occasions. It would eventually resolve if I let the batteries drain and then recharge. The last time it happened I came to these forums and learned how to enter recovery mode. I tried to do a firmware update which failed and now the player will only boot into recovery mode. When I attempt to do the firmware update I get the message player not connected. I can see the player connected in windows and can actuall browse the HD which is obviously now empty. How can this be resolved?

    Re: Problem with ZEN MX >FYes, it's true. Creative Centrale is full of **bleep**.:robotmad: You can use it only to one thing. To convert films from your computer to their stupid format called "cmv". But even with this it's stil the same problem. This is crap, because sometimes you can do it, but sometimes not. Beside of this Creative Centrale doesn't have any good functions. For further users - don't install Creative Centrale! You will have more free space and do all things (without moving films to watch on your player) just from your computer and not this **bleep**.

  • Which portable speakers are compatible with my Zen vision M

    can anyone tell me which other speakers are compatible with my Zen Vision M. other than the Z500thanks

    all speakers including other brands that has a Line-In will work with the player for audio....

  • Problem with Group policies and Administrator count

    I have one problem with Group policies and Admnistrator count.
    Win XP, Client 4.91, Client Zen 4
    I use DLU for users.
    the Group policies are well applied and i keep them after logout for
    security reasons.
    But my problem is, after logout, the Administrator count becomes this
    Group policies, and the only technique that I use, is to remove the
    repertories c:\windows\system32\GroupPolicy*. Administrator must
    loguing again for having good policies.
    Can you help me?

    Bill,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

    I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
    Currently use a Mac with the latest Mavericks 10.9.4

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

Maybe you are looking for