Compatible tomcat version for Directory server 6.3

Dear All,
Could someone please tell me which version of Tomcat will be the compatible for Directory Server 6.3. And i am new to this directory server environment, here i need to install tomcat too so kindly send me the steps for installing tomcat. Thanks!
Regards,
Karthik

Hi Karthik,
Directory Server 6.3 Control Center has been released many years ago, so it has been certified (so this means that IT IS OFFICIALLY SUPPORTED) on the most common application servers at that time, so Tomcat 5.5 and Sun App Server 8.2.
Personally I've run the DSCC also on the latest releases of Tomcat (6.0.35 at the time of writing) and Glassfish (2.1.1 series) for test deployments absolutely fine; but in case of issues, if you want your solution to be 'officially supported' by Oracle, you've got to reproduce the problem on the supported app servers in the compatibility matrix.
HTH,
marco
P.S.: also Directory Server 6.3 is getting older and older... at least try to get the latest patch: 6.3.1.1.1
http://docs.oracle.com/cd/E19261-01/E26994/html/index.html
The latest release is now 11.1.1.5.0 if you don't have any architectural/sw compatibility constraint, try to move/migrate to a more recent release

Similar Messages

End of support dates for Directory Server

does anyone know where I can find an end of support matrix for Directory Server ? We are still running 5.1sp4.....Thanks

Is this information publicly available? I am interested in this as well...
Thanks

Compatible NWDS version for SP 22 ?

Hi All,
We are using NW2.0 version, EP 6 version.
Client has upgraded only the QA portal to SP 22.
(not sure about DEV sp details)
Note: DEV portal and QA portal are not in same patch level.
Which is the compatible NWDS version for SP 22?
Please suggest.
Regards,
Subashini.

Hi,
Did you check the PAM?
https://websmp107.sap-ag.de/pam
Regards
Ayyapparaj

Can't find SP4 patch for directory Server 5.1

I am trying to upgrade directory Server 5.1 SP2 to SP4 on sunOS 5.8, but am having some difficulties in finding the actual patch. Below is what the release notes for SP4 say about updating form a previous 5.1 version. I have found the 113859-04 patch, but it is for sunOS 5.9. I even tried to run this patch on the test server but found that it complained about everything being out of date. I have downloaded directory Server 5.1 SP4 so I could try the ZIP install, but could not find any patch ZIP that they reference from the release notes section below. I am assuming if I just do the standard install of the Directory Server 5.1 SP4 it well destroy my current configuration instead of updating it. I am hoping for any help in this upgrade as I have not found any information in all my searches. thanks for the Help.
# If you are running a ZIP installation, upgrade by using the patch ZIP provided with Directory Server 5.1 SP4
# If you are running IPLT packages, upgrade by installing the following packages:
SPARC: 113859-04
x86: 114273-04

I forgot to tell one thing: I use SSL, without SSL I do not have this problem. Perhaps it's only the popup I get when starting DS, where I have to enter the certificate password?

H/w requirements for DIrectory server for 200,000 users

Hi,
I would like to implement Directory services for 200,000 users. How can I know whether iPlanet Directory 5.1 will support this many users or not? If supports, Which h/w I have to use?
If any one can let me know the formula to calculate users and h/w
Thanks

The directory server can handle many more users than 200K. The hardware requirements calculations are amply explained in the book "Solaris and LDAP Naming Services" by Bialaski. If you have iPlanet support contract they can provide you tuning information which includes this info.
You should remember the possibility of growth and load in terms of number of clients and peak requests per second. With your needs, my gut feeling is that even a Netra can host it. However, if it's an enterprise service you may want to go with at least 220 machines in a replicated configuration for load balancing and availability.
DISCLAIMER: Use these opinions at your own risk. You must do your own analysis and calculations to design a suitable physical/logical architecture.

URL to be used in high availability for Directory Server

Hi All,
I have an environment configured for high availability. I have two OVD and OID servers each in this environment, configured in high availability. What should be the value in the Server URL field of the Directory Server IT Resource in the OIM for this environment? In the normal environment, I had it as "ldap://ovdhost01:6501" and it was working fine. But since there are two servers here, I am not sure what URL to use in place of this. The entry for the two ovd hosts in the OHS is "idstore.com" which is configured on 6501 port. But I tried using the following URLs and none of them worked:
1. idstore.com
2. ldap://idstore.com
3. ldap://idstore.com:6501
4. ldap://ovdhost01:6501,ldap://ovdhost01:6501
Can someone help me know the correct URL to be used in this case?
Thanks,
$id

Not sure about OVD or OID but for SOA and OIM:
SOA:
XMLConfig -> XMLConfig.SOAConfig -> SOAConfig
Rmiurl -> t3://soahost1:soaport1,soahost2:soaport2
Soapurl -> Load balancer or web server url (without the /workflow context)
OIM:
XMLConfig -> XMLConfig.DiscoveryConfig -> Discovery
OimFrontEndUrl -> Load balance or web server url (without the /oim context)
And ofcourse on your LB or WebServer, you need to configure these:
SOA: http://docs.oracle.com/cd/E23943_01/core.1111/e10106/ha_soa.htm#CHDDJEGD
OIM: http://docs.oracle.com/cd/E21764_01/core.1111/e10106/imha.htm#BGBDFEIE
-Bikash

Can't start NT service for Directory Server using other acc. than LocalSys.

Hi!
I'm using Directory Server 5.1 on a Windows 2000 machine.
I wrote a Plug-In for DS that needs Administrator Access to the NT Domain. So I tried to run the DS-Service as Administrator but the service can not start. I just keeps in status "starting...".
I don't get any error message and the errorlog doesn't contain anything.
Has anyone an idea?
Thanks!
Florian

I forgot to tell one thing: I use SSL, without SSL I do not have this problem. Perhaps it's only the popup I get when starting DS, where I have to enter the certificate password?

How can I achieve high available solution for directory server

You can start with deploying multi master replication which will give you 2 servers available for writes (and as many read-only consumers as you want).
You can also install Directory Server in a Cluster (using Sun Cluster) which will provide more failover capabilities.
If you combine both, you should be able to have almost no downtime.
You can also use the Directory Proxy Server (aka iDAR) to provide transparent failover for client applications.
I hope this help.
Regards,
Ludovic.

Licensing-Can I use 10 client version for Web server?

I have a client that is looking to move their web servers from IIS and Windows to OSX server.
My question is, how does the licensing shceme work? Can we use a 10 user version of OSX Server for a web server, or do we need the Unlimited version?
Not 100% familiar with the server side of Mac things, so treat me gently

Hi
The licensing only applies to connected AFP users, so you can use a 10 Client version without any problems.

Minimum Solaris installation for Directory Server

Hello,
i want to set up a new Solaris installation for Sun ONE directory server.
But i don't want to install always the "entire distribution" and then turn off all services. I want to keep the solaris os installation as small as possible. Has anybody tried this before and can report some experiences? Is the "reduced network" cluster the right way to go or better the "core" cluster? Does anybody have a list of the packages which must be installed after a minimal solaris installation for the ds to work?
Thanks a lot,
af_inet

Since you original question is "minimum requirement
at the SERVER", I would say that X is not really
needed at the server end if you use installer text
mode CLI (command is "./installer -nodisplay")
instead of installer graphical mode (GUI). However,
to fix uninstall/reinstall issue, X is needed as the
"prodreg" which is used to uninstall packages is a X
program, without text mode option.This is correct.
It is not a must to run ./startconsole (X program)
LOCALLY so as to perform DS admin functions as you
could always run SUN ONE Console REMOTELY from any
remote host (Windows or UNIX/Linux) with just the
console binaries installed. (for large data centre
env. the LDAP server is usually locked in server room
away from your desk and you tend to use remote admin
console).This is correct too. I think it's a matter of taste if i want to install console on the DS itself or on a separate host. As long as i have only one DS i will leave it on the machine itself. But you are right, this is not a must. So i should have asked my question more precicely :-)
Thank you very much,
Chris

How to find the patch & version of directory server

How to find version & patch of Sun JES Directory Server.
What does 2005Q4 mean to?

Just look at your errors log file after you start up the directory server. If you are running Directory Server 6.0 you will find a line that looks like this:
Sun-Java(tm)-System-Directory/6.0 B2007.030.1546 (32-bit) starting up
Depending on the version you have it will show something slightly differently.

Time Setting for Directory Server Gateway

I am using the DSGW software supplied with Netscape Directory Server 4.1. When a client search returns a client displaying the last modified time, the time is from a wrong timezone.
This entry was last modified on Thursday, November 07, 2002 10:17:21 PM EST by PMurphy
This displays EST, my timezone is Australia EST
How can I get it to display correct timezone information

Yeh - I did check time zone on server; when i call date from command line, it gives correct time (including tmiezone), so it looks to me that it is NOT using the timezone as from the system.
any other ideas?

Correct version for windows server 2008 Standard 64 bit

Hi could you help me to download the right version to install adobe reader in a machine running Windows server 2008 with 64 bit, since this machine doesn't have internet access I would need the offline installer but I don't know where to get it.
Thanks

Is this just for people sat at the server as if it were a workstation? Use the Windows 7 version.

Compatible Portal Version for GRC 10

Hello GRC Experts,
We are upgrading GRC PC 3.0 to 10.0 and our Client is using Portal to access PC. We are also planning to upgrade Portal version 7.0 to 7.3. Please let us know which version of the Portal is compatible for GRC 10 (PC and AC will be upgraded to 10).
We are informed that Portal 7.3 is not compatible, kindly advise if there is a patch available to make Portal 7.3 compatible for GRC 10 (PC and AC) upgrade.
Thanks and regards
Babu.

Hi Babu,
As of now EP 7.02 is supported for integration with GRC 10. Please check the SAPnotes below for the intgration and compatiability details.
1) Note 1603438 - GRC AC 10.0 EP Plug-In (JAVA), supported NW versions
2) Note 1607279 - GRC 10.0 Enterprise Portal - Integration Scenarios
3) Note 1607232 - GRC 10.0 Enterprise Portal Configuration
BR,
Guru

AS5350XM - Compatible IOS version for 'ip host ... srv' command.

Hi Friends,
I'm having AS5350XM model of Voice Gateways in CVP8.0 environment working with ICM8.0 and CUCM8.0.
I'd like to define static hostname-to-address mappings in VG for my CVP CallServers along with command argument 'SRV' to use all 4 CVP servers for loadbalancing and failover functionality thereby assigning priority to each call server.
I tried by using a couple of IOS version starting from 12.4(24)T4 till 15.1(3)T, but can't find a particular version which supports the argument 'srv'.
I'd appreciate if someone could suggest me an appropriate IOS version supporting 'srv' argument with 'ip host' command on AS5350XM Gateways.
Pls feel free to revert for any clarifications. Thank you.
Regards,
Soman Nair.

You should be able to do it.
In your dial peer you should be able to say
session target dns:callserver.sgp.foobar.com
and in your IP host table
ip host CA1.sgp.foobar.com 10.10.1.2
ip host CA2.sgp.foobar.com 10.10.1.3
ip host CA3.sgp.foobar.com 10.10.1.4
ip host CA4.sgp.foobar.com 10.10.1.5
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA1.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA2.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA3.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA4.sgp.foobar.com
Regards,
Geoff

Compatible tomcat version for Directory server 6.3

Similar Messages

Maybe you are looking for