Compatible Unit Software Component in SAP Enhancemant Pack 2

Hi All,
Can anyone pls tell me Which software component I need to apply for Compatible Unit (CU) ? Which are are the files I need to deploy ?
I want to install CU in our ECC 6.0 environment. What are the pre-requisites for that ?
Thanks and warm regards
Purnendu

Hi,
While Importing some components has missed and the Exception is unable to handle it. Is it possible for you to Import again and check the table space is sufficient.
Regards
Agasthuri Doss

Similar Messages

Compatible Unit Software Component in SAP Enhancement Pack 2

Hi All,
Can anyone pls tell me Which software component I need to apply for Compatible Unit (CU) ? Which are are the files I need to deploy ?
I want to install CU in our ECC 6.0 environment. What are the pre-requisites for that ?
Thanks and warm regards
Purnendu

Hello Senthil,
If you have access to FPM wiki, you can check it.
Thanks, Senthil

Some Software Component Versions do not show up in transaction sproxy

I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?

Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor

Aborted: development component - com.sap.pct.mdm.appl.packages.mdm_550

Hi,
I have upgraded my EP from EP 6.0 SP 9.0 to EP 6.0 SP 19.
I have undeployed the following first
com.sap.pct.mdm.appl.packages.mdm_550
com.sap.pct.mdm.tech.packages.mdm_550
com.sap.pct.mdm.tech.systems
com.sap.pct.mdm.tech.wizards
com.sap.pct.mdm.appl.masteriviews
com.sap.mdm.tech.connector
com.sap.mdm.tech.mdm4j
com.sap.mdm.uwl
com.sap.mdm.uwl.config
When trying to deploy BPMDMTECHN06_0.sca, I am getting the error. Can any one tell me the reason.
Starting Deployment of com.sap.pct.mdm.appl.packages.mdm_550
Aborted: development component 'com.sap.pct.mdm.appl.packages.mdm_550'/'sap.com'/'SAP AG'/'5.50.20071025121041.0000'/'0', grouped by software component 'BP_MDM_APPLICATION'/'sap.com'/'SAP AG'/'1000.5.50.6.0.20071025122621''/'0':
Caught exception during module deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.mdm.appl.packages.mdm_550.. Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.mdm.appl.packages.mdm_550.epa: The following objects could not be locked: [pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.bupa/com.sap.pct.mdm.appl.bupa.result_set|Administrator]
com.sap.portal.prt.sapj2ee.deployment.PortalDeploymentException: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.mdm.appl.packages.mdm_550.epa: The following objects could not be locked: [pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.bupa/com.sap.pct.mdm.appl.bupa.result_set|Administrator]
     at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchive(PackageDeployServiceImpl.java:215)
     at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchives(PackageDeployServiceImpl.java:363)
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:163)
', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception during deploy: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.mdm.appl.packages.mdm_550.epa

It seems like few objects are still locked. I faced this problem once.
Please restart the WEBAS and then proceed again. Restart will release all held locks on the objects.
Please award points if helpful
Regards
Saurabh

Regarding BASIS software Component 7.01

Hi All,
Our basis team applied EHP1 SAP NetWeaver 7.01to our landscape and they have imported the BASIS software component "SAP BASIS 7.01" to PI system .
Now i have Two BASIS software components "SAP BASIS 7.0" and "SAP BASIS 7.01"
I have already configured many interfaces in Configuration , all Adapters are using the BASIS software component as "SAP BASIS 7.0". How can i make use of "SAP BASIS 7.01" for all which is already configured?
I can select the "SAP BASIS 7.01" for newly creating communication channels
what abt already existing communication channels??
Generally what would be the procedure for this when we have new BASIS SWCV???
Regards

Hi,
>>So when ever we have New BASIS component , then we need to change the existing channels manually if we want to use the new BASIS component??
yes of course how would the new parameters be filled ?
>>>Is there any automatic update?? ) ( i don't think so)
you're right
>>As far as i know there is no major difference between SAP BASIS 7.0 and SAP BASIS 7.01
not true for IDOC adapter there are many new parameters now
like idoc packaging
so there are some important changes with some adapters but you don't need to change it if you don't need to use them
Regards,
Michal Krawczyk

Software component and unit in PI 7.0

can you distinguish bw software component and unit in PI 7.0.
since unit is not available in XI 3.0.

S/w Unit is a logical link between Product version and SWCV.
S/w unit contains information of product version and this infomation can be shared across all software component version related to that particular product version.
A product can have many S/w units and a S/w unit can have many SWCVs
Regards,
Prateek

Entry in SLD for SAP delivered software component contents

Hi
I have a predelivered software component version ( SWCV ) ESA ECC-SE 602 which I imported into IR ( by setting the *tpz file in the appropriate folder and the imported from IR ) This worked ok. Now I have a custom SWCV - that I created in SLD. Before importing this into IR , I want to create a install time dependency from this custom SWCV pointing to the standard. SWCV.
Question is : Where is the entry in SLD for the SAP standard SWCV - i.e ESA ECC-SE 602 - without this entry - in SLD - how can I point my custom SWCV to ESA ECC-SE 602 ? Or is there any other zip file apart from the *tpz file that is available in marketplace for ESA ECC-SE 602 that I need to import into SLD ? I am stuck at the point of defining the dependency with this question.

Hi
I see that in IR , the SAP std software component has the following name ECC-SE, version 602 . But I do not see a corresponding entry for this in the software catalog in the SLD.
*Question is - should an entry be created automatically in SLD under the software catalog for all SAP delivered contents whenever the tpz file is imported into the IR ? I don't see it created in our case. What is missing ?

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

SAP EU software component for Web Dynpro SP9

Hi all,
I've followed the tutorial on how to create a Web Dynpro Callable object and couldn't go further because I couldn't find the libraries needed in the Local DC (caf/eu/gp/api/wd) api's.
I've found the Blog from Andre Truong on how to retrieve this API's in your Local Development Component projects (SP7).
/people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Unfortunally this is only working for SP7 (And maybe SP8) but not for SP9.
In the blog Andre mentioned that this problem might be resolved with SP9 because the API's come as default with the IDE.
This appears not to be the case for me.
Does anyone know how to resolve this problem?
PS I also read the following thread and the reply from Tomas Kuba but that seems to be a difficult and dirty way to do it?
Re: Guided procedures & WebDynpro (SAP-EU software component)
Thanks in advance!

Ok, seems to work just fine for SP 9 also.
Only the folders eu and gp don't excists. Just create them and extract the zip files.
Great blog thanks!
Message was edited by:
B. van Prooijen

Guided procedures & WebDynpro (SAP-EU software component)

Hi,
I'm trying to develop a Webdynpro component that is going to be used in Guided Procedure (CAF) in 2004s SPS08.
This snippet is in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/de/8976417f2d5558e10000000a1550b0/content.htm">tutorial</a>:
The software component SAP-EU must be imported in your development configuration. In particular, you need the following development components (DCs):
- caf/eu/gp/api
- caf/eu/gp/api/wd
In addition, you need the following DC from the software component SAP-JEE_1:
- com.sap.security.api.sda
I do know how to use DC's but where do I get this component SAP-EU from ? I could not find these caf/eu/gp/api etc. components in anywhere in the DC's I have on the local development.
Kind Regards,
Jari Pakarinen
Message was edited by: Jari Pakarinen

Jari,
Seems that document may be useful: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f7be53bb-0b01-0010-1c96-be3cb6799c1b.
Also re-post your question to specialized forums: Composite Applications
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Software component

Hi all,
could anyone give me some idea on what are the mandatory fields while we creating software component in sld( give me idea what is the UNIT field while we creatinmg SWCV)
regards
Joshi

HI Joshi
YOu mean to say Software Unit..
If yes Software unit is a particular aspect of the Product functions.It is a logical link between the product version and the software component version.
A product version consists of multiple software units. These units are implemented by various software components (or versions).
The product SAP R/3 Enterprise, which represents an SAP technical component, has, among other things, a product version SAP R/3 Enterprise Core 4.7. The software unit that represents the functions of this product version has the same description as the product version. Various software components (or versions) fill the functions of this software unit. These software components (or versions) are, among others, SAP Basis 6.20, SAP HR 4.70, and SAP Enterprise Retail 1.10.
To know more about Software Unit, please see page 30 onwards of the help file of SLD by going on this link:
http://<xiserver name>:<port>/sld/doc/sld.pdf
This help file will give you information about Software Unit if PI 7.0 is installed on your machine.
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

XI 7.0 Software Component on SLD

Hi,
i am new in using XI 7.0 based on NW2004s
i can not delete Software Component Versions i created,
remove buttom is disable. how can i delete SWC?
i can delete product, but not software component
when i create software componet, what is unit?
thanks
venjmain

Hi,
what state should i change?
i tried to change "develope" from "released", but same issue.
and when i selected some SWC SAP provieded on select screen, that SWC is getting into table control, but MY SWC i created, is not getting into table screen.
and how can i delete SWC I created? which is not getting into table screen so i can not delete it
i am missing XI 3.0, he he
does anybody has exprience?
thanks
venjamin?

Software Component Vector in Modification Adjustment Transport

Hello all,
We are in the middle of a support pack project for our SRM system, and I've run into a snag as I prepare to move them into QAS. We've had this system for many years, and when DEV was originally installed in 2000 it was as a B2B 2.0a system. It was upgraded to 2.0b before GoLive, and the QAS and PRD systems were installed directly as 2.0b systems. The entire landscape has been upgraded several times in the twelve years since, and today it is on release SRM 5.0.
The problem is that the DEV system still shows an installed software component of NDI_ERM (Extended Relationship Management) in release 20A. Obviously that is actually long gone, but it still shows up in SPAM in the Display Package Level function, and under Attribute SAPCOMPONENT in the properties of all transport requests released from this system. It should have been passively deleted during the first (or subsequent) upgrade long ago, but for whatever reason that didn't happen. This software component never existed in QAS or PRD and does not show up in SPAM in those systems.
This hasn't been an issue in the past, and so I've just ignored it as I always had bigger fish to fry. I've performed upgrades and support packages for these systems without an issue, but we hadn't done any of these tasks for the past three years.
Until now.
I successfully installed support package stack 28 for SRM 5.0 into DEV a few months ago, and I performed the required modification adjustments in SPAU, creating the usual modification adjustment transport. Now, however, when I am trying to import the support packs into QAS, I have a problem when defining the queue, at the step for adding the modification adjustment transport. The transport is marked with a Software Component Vector that includes the defunct ghost NDI_ERM 20A, and NDI_ERM doesn't exist in QAS. SPAM finds the transport, but marks it with a red light ("Transport does not fit"). Drilling into details shows me that everything matches perfectly except for my ghost. On that line I get "The software component is not installed," and SPAM will not allow me to add the transport into the queue.
I should point out that I can import regular transports just fine, and I'm pretty sure I could just import the queue without the modification adjustment transport, and then import it manually when SPAM gets to the step about performing the adjustment. No doubt that would work, and that's almost certainly what I'm going to end up doing. But it bugs me that I can't fix this.
I have some thoughts about fixes that might work, and I'd like input on whether anyone else has dealt with (and solved) this problem before.
I think that I could probably just delete the line in DEV in table CVERS for NDI_ERM and so have it no longer show up in the attributes of future transports. That might solve the problem going forward, though it won't fix the mod adjust transport I've already released. Any thoughts about this?
I was able to get the existing transport to no longer show NDI_ERM in its attributes by deleting the appropriate line in DEV in table E070A. After doing that the transport looked fine in the STMS queue for QAS when drilling into its properties. However, this apparently isn't enough for SPAM. As I had already uploaded the transport in SPAM once, SPAM 'remembers' it and seems to have therefore cached its properties, including the NDI_ERM software component. I haven't been able to figure out how to get SPAM to 'forget' this transport so I could completely upload it anew and hopefully get new attributes that will then match the correct software component vector for the target system. Resetting the queue status doesn't do it.
Any thoughts on where (what tables) SPAM stores information about modification adjustment transports, and how to clear that information out? Any thoughts on the (admittedly drastic) measures I've mentioned above?
Thanks in advance,
--Matt

Hello,
SAP strictly forbids the modification of those tables for specific Add-Ons or even essential software component. As you do not really delete those products from a SAP system. This will only partially remove meta information from a SAP sytem. After the "reinstallation" the data and many other log files are still exists and may have some really inconvenient side effects in a SAP systems (inconsistent installation, incomplete database table conversion, problems regarding maintenance via notes and support packages, modifications cannot be reverted...) .
Additionaly it will be very difficult or even impossible to resolve upgrade or maintenance issues.
If you have any issue regarding an installation of a SAP product, you should contact the corresponding SAP support. They will provide you the right solution.
Currently SAP only provides for a small subset of Add-Ons the deinstallation.
Thanks a lot for your understanding
with kind regards,
Thorsten Scheyter (Development support)

Is it mandatory to give the software component version

while setting up sld objects . and in creating a software product is it mandatory to give the software component version also in it
please advice
thanks and regards
sandeep

Hi,
When u click on Product then it will give u one screen where u need to provide product,Unit,vendor,version,name all fields are mandatory.
Yes it is mandatory field.
Haev a look at the process in SLD.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
Thnx
Chirag

Impact to existing Software Component during EHP upgrade

Hello Friends,
I have the below query with regard to Enhancement Pack Upgrade from EHP5 to EHP6.
Our Current set up
ERP Version - SAP ECC 6.0, EHP5
SPS Stack 11 (Released Oct 2013)
SAP_HR Level 69 (Released in Dec 2013)
Proposed upgrade to
ERP Version - SAP ECC 6.0, EHP6
SPS Stack 09 (Released in Oct 2013)
SAP_HR Level 69 (Released in Dec 2013)
When we upgrade the system to EHP6, SPS Stack 09, what would be the impact to the SAP_HR software component which is already on SP level 69 which is released on December?
After upgrade will the SAP_HR SP level be downgraded to level 66 (released in Oct), since we are moving to SPS Stack 09 ? And are we expected to apply SAP_HR SP 67, 68 and 69 once again?
OR
2. Will the SAP_HR component remain at SP level 69 while rest of the system gets upgraded to EHP6 SPS Stack 09 (Oct 2013)?
Any help would be appreciated.
Thanks,
Ananth

Hello Ananth,
The EHP upgrade will not downgrade the SAP_HR packages,
if stack level that has lower SAP_HR level included it will remain at current level
and apply stack level to any components lower than that so as you
describe in second part is accurate.
Regards,
Aidan

Compatible Unit Software Component in SAP Enhancemant Pack 2

Similar Messages

Maybe you are looking for