Compensation Datasources

I have the following questions about the HR compensation datasources. Any comments will be appreciated.
I have activated the following datasources in ECC from
HR-Compensation Management...
1. Adjustments(0HR_PA_CM_1) - When I run the extractor checker, 0 records are being pulled. The delivered version of the datasource extracts the data from the Infotype 380, whereas I found out that the infotype 380 is deemed obsolete by my client.
Is there any other version or datasource that pulls the information from latest infotypes ?
2. Awards-Nullification(0HR_PA_CM_2)
Awards-Exercising(0HR_PA_CM_4)
Awards-Vesting(0HR_PA_CM_5)
Awards-Granting(0HR_PA_CM_3)
All these datasources are pulling only few records in the extractor checker. The delivered datasources are pulling the data from the infotype 382.
Are there any updated versions or datasource(s) which pulls the data from the latest infotypes ?

HI Ajay Kumar,
did you can to resolved this problem?
Regards

Similar Messages

HR PA-EC Enterprise Compensation Management Load Issue

All,
I have activated standard business content and have connected ECC 5.0 source to BW 3.5. I tried executing a load for Compensation Process ODS and the load says there is no data available in source system.
I checked the source and infotype tables 0759 & 0758 both contain data. I also did an extract check in source and it returns values, however when executing the load in BW it returns no values.
Any advice?
Thanks,
DC

Hi DC,
I know it has been more than an year that you faced this issue and closed this thread. But I thought I could get some input from you. I am having a similar situation, but in my case I am unable to see any records being pulled in the Extract Checker in ECC.
The scenario I am having is same as yours. I have installed the Adjustments datasource 0HR_PA_CM_1 (and other datasources for Awards and Analysis) from Content and ran the extract checker. There were 0 records being pulled. Then I found out that the relevant info types for compensation are 758 and 759, and not 380(the delivered DS pulls data from info type 380).
I see that in your case you are able to get the records in the extract checker. Can you please help me in getting the data being pulled from infotypes 758 and 759 ?
Thank you. Any help will be greatly appreciated.

Problem while scheduling info package using HR datasource.

hi experts,
while scheduling the info package i am getting the following error.
Delete init. request
REQU_D340A67OSEQ9A6Q2B20X9SIOM before running
init. again with same selection
I think by deleting the setup it will work...
am i right or is there any other solution for this problem..
please reply soon.
its too urgent.
thanks n regards.
uday shankar.

Hi,
You are correct there is no setup table concept in HR extractors.
But there is a cache. Usually HR extractions will be full load. But it also supports delta. There is no setup table concept in HR.Once you perform your init (with or without Data transfer your delta path is set and delta will follow else can go for Full loads alone. It will extract data from the relevant tables like generic extractors. The data will be filtered based on the selection parameters.
Except for payroll and time management rest all sub-functional areas supports only full load.
In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
Auditing Information Technical name: 0HR_PY_PP_1
http://help.sap.com/saphelp_nw70/helpdata/EN/c7/532d7835db9a41b744aea58ed699ed/frameset.htm
Delta Update
This DataSource supports delta updates. The source system fills table HRMS_BIW_PPDELTA with the date and time of the first data transfer (initialization) and the date and time of all subsequent data transfers. This information enables the system to perform a delta transfer. It only selects posting runs with the above statuses whose last changed on date is after the date in table HRMS_BIW_PPDELTA.
If you use DataSources 0HR_PY_PP_2 (Posting Documents) and 0HR_PY_PP_1 (Auditing Information), you must transfer data to BW from both DataSources using the same selection criteria.
Also
http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
step by step
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
HR extraction:
The HR module enables customers to effectively manage information about the people in their organization, and to integrate that information with other SAP modules and external systems
HR broadly has the following modules:
PA (Personnel Administration) and Organization Management
Personnel Development
Payroll Accounting
Time Management
Compensation
Benefits
Training and Events
The Personnel Administration (PA) sub module helps employers to track employee master data, work schedules, salary and benefits information. Personnel Development (PD) functionality focuses on employees' skills, qualifications and career plans. Finally, the Time Evaluation and Payroll sub modules process attendance and absences, gross salary and tax calculations, and payments to employees and third-party vendors
HR delivers a rich set of business content objects that covers all HR sub-functional areas.
How the data extraction happens:
Before getting into how the data gets populated into HR info cube
Let's understand the term info type
"An info type is a collection of logical and/or business-related characteristics of an object or person"
Here the data will be extracted from an info type (PA, PD, time management etc) and for few other applications it is from the cluster tables (Payroll, compensation etc.)
HR is basically master data centric because it is always related to people related Info Objects, such as Employee, Person. In most of the cases HR master data is defined as Time Dependent to enable historical evaluation. HR R/3 system records a specific period of validity for each Info type.
Procedure to extract the HR data:
Activate Data Sources in the Source system (R/3)
Replicate Data Sources in BW system:
Activate business contents in BW.
Populate HR cubes with data by scheduling info packages.
Note: Master Data should be loaded first
Except for payroll and time management rest all sub-functional areas supports only full load.
In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
Check the below links for more information
Technical Considerations in Global SAP BW/HR Implementations
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/505351fe-ec8c-2910-c5b5-a43bbf53f6fc
BW/HR Implementation
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
Hope this helps.
Thanks,
JituK

Datasource for HR 0JOB_ATTR

Hi All,
I am activating the datasource 0JOB_ATTR in R/3 and when checking in RSA3, its giving error stating " The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR." Please help me as I am not able to loacate any OSS or help for the same.
thanks in advance.

0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the follwoing:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data".
Hope it helps.

How to create a Compensation handler

Jdev 10.1.3.4
I am trying to rollback the insert statement using compensation handler.
I created a delete statement in DBAdapter and calling it from the compensation block in innerscope.
In the outer scope, I am catching the error and calling the compensation activity and i set the scope of compensation to inner scope.
when I execute the BPEL process, if the BPEL process errors out my compensation activity is not invoked.
Could somebody help me to resolve this issue?

Is this XA datasource feature available in 10g Soa suite..
--Prasanna

HR Datasources

Hi All,
What are the standard datasources available for HR? I am specificaly looking for employee attendance information. Even backend tables would be helpful for me.
Regards,

Hi,
These are the data sources are avialbel in hr
1     PA-PA     Personnel Administration
     PA-PA-IO     0ACTIONREAS_TEXT     Reason for Action
          0ACTIONTYPE_TEXT     Action Type
          0AGE_RANGE_TEXT     Age Range
          0BRNCHSTDY_TEXT     Branch of Study
          0CERTIFIC_TEXT     Certificate
          0CNTRCTTYPE_ATTR     Contract type
          0CNTRCTTYPE_TEXT     Contract type
          0EDUCATION_TEXT     Education and Training
          0EDUC_EST_TEXT     School type
          0EMPLCNTRCT_TEXT     Work Contract
          0EMPLGROUP_TEXT     Employee Group
          0EMPLOYEE_0016_AT     Employee - contract elements
          0EMPLOYEE_0022_AT     Employee - Education and Tra
          0EMPLOYEE_0077_AT     Employee - additional person
          0EMPLOYEE_ATTR     Employee
          0EMPLOYEE_ID_ATTR     Employee - personnel ID
          0EMPLOYEE_TEXT     Employee
          0EMPLOYEE_USER_AT     Employee - system user name
          0EMPLSGROUP_TEXT     Employee Subgroup
          0EMPLSTATUS_TEXT     Employment Status
          0ETHN_ORIG_TEXT     Ethnic origin
          0GENDER_TEXT     ***
          0MIL_STATUS_TEXT     Military status
          0NATION_TEXT     Nationality
          0ORG_KEY_TEXT     Organizational Key
          0PAYRL_AREA_TEXT     Payroll Area
          0PAYSCALEAR_TEXT     Pay Scale Area
          0PAYSCALEGR_TEXT     Pay Scale Group
          0PAYSCALELV_ATTR     Pay scale level
          0PAYSCALELV_TEXT     Pay Scale Level
          0PAYSCALETY_TEXT       Pay Scale Type
          0PERSLANGU_TEXT       Language
          0PERSON_ATTR       Person
          0PERSON_TEXT       Person
          0PERS_AREA_TEXT       Personnel area
          0PERS_SAREA_TEXT       Personnel subare
          0SALARYAR_TEXT       Pay grade area
          0SALARYGR_TEXT       Pay Grade
          0SALARYLV_ATTR       Pay grade level
          0SALARYLV_TEXT       Pay grade level
          0SALARYTY_TEXT       Pay grade type
     PA-PA     0HR_PA_0     Employee
          0HR_PA_1     Personnel Actions
2     PA-RC     Recruitment
     PA-RC-IO     0ADVERT_ATTR     Job advertisement
          0ADVERT_TEXT     Advertisement
          0APPLACTION_TEXT     Applicant Action Type
          0APPLGROUP_TEXT     Applicant Group
          0APPLICANT_ATTR     Applicants
          0APPLICANT_TEXT     Applicant
          0APPLSGROUP_TEXT     Applicant Range
          0APPLSTATUS_TEXT     Overall status of applicant
          0APPLSTREA_TEXT     Applicant status reason
          0MEDIUM_TEXT     Medium
          0RC_INSTR_ATTR     Recruitment Instrument
          0RC_INSTR_TEXT     Recruitment instrument
          0UNSAPPGRP_TEXT     Unsolicited Application Group
     PA-RC     0HR_PA_RC_0     Applicant
          0HR_PA_RC_1     Applications
          0HR_PA_RC_2     Applicant Actions
3     0PAPF     Pension Fund
     0PAPF-IO     0PF_ACCTY_TXT     Account Type Pension Fund
          0PF_ACTION_TXT     Activity of the Processing Control Pension Fund
          0PF_ATTRCLAS_TXT     Attribute Class
          0PF_ATTRIBUTE_TXT     Employee Attribute for Attribute Classes
          0PF_EVENTS_TXT     Event in the Pension Fund
          0PF_FUND_ATTR     Pension Fund
          0PF_FUND_TXT     Pension funds
          0PF_PRODUCT_TXT     Pension Product
          0PF_VALTY_TXT      Value Type Pension Fund
     0PAPF     0HR_PA_PF_1     Basic Data Pension Fund (Info Type 0278)
          0HR_PA_PF_2     Individual Data PF (Info Type 0279)
          0HR_PA_PF_3     Account Data Pension Fund
          0HR_PA_PF_4     Event Data Pension Fund
          0HR_PA_PF_5     Calculated Results Pension Fund
4     0PA_PD     Personnel Development
     0PA_PD-IO     0APPRAISAL_ATTR     Appraisal
          0APPRAISAL_TEXT     Appraisal
          0APPRAISEE_TEXT     Appraisee
          0APPRAISER_TEXT     Appraiser
          0APR_CRIT_TEXT     Appraisal Criteria
          0AP_GRP1_TEXT     Appraisal Criteria Group 1
          0AP_GRP2_TEXT     Appraisal Criteria Group 2
          0AP_RATING_TEXT     Evaluation of an appraisal element
          0AP_SCHEME_TEXT     Appraisal Model
          0AP_STATUS_TEXT     Status of appraisal
          0PROFCNCY_TEXT     Proficiency of a qualification/requirement
          0QUALIFICTN_HR01_HIER     Qualifications
          0QUALIFICTN_TEXT     Qualification
          0QUALIGROUP_ATTR     Qualification group
          0QUALIGROUP_HR01_HIER     Qualification group
          0QUALIGROUP_TEXT     Qualification group
          0SCALE_TEXT     Scale ID
     0PA_PD     0HR_PA_PD_1     Qualifications
          0HR_PA_PD_2     Appraisals
5     0PA_OS     Organizational Management
     0PA_OS-IO     0HRPOSITION_ATTR     Position
          0HRPOSITION_CCTR_ATTR     Position - Cost Center
          0HRPOSITION_TEXT     Position
          0HRWORKCNTR_TEXT     Work Center
          0HR_OTYPEOBJECT_TEXT     HR object type/object
          0HR_OTYPE_TEXT     HR object type
          0JOB_TEXT     Center
          0ORGUNIT_ATTR     Organizational Unit
          0ORGUNIT_HR01_HIER     Organizational unit
          0ORGUNIT_TEXT     Organizational Unit
     0PA_OS     0HR_PA_2     HR Structural Authorizations- Values
          0HR_PA_3     HR Structural Authorizations - Hierarchies
          0HR_PA_OS_1     Staffing Assignments
6     0PA_BN     Benefits
     0PA_BN-IO     0BEN_AREA_TEXT     Benefit Area
          0BEN_OPTION_TEXT     Benefit health plan option
          0BEN_PLAN_TEXT     Benefit plan
          0COSTGRP_TEXT     Cost Grouping
          0COVERGRP_TEXT     Coverage Group
          0CREDITGRP_TEXT     Credit Grouping
          0DEPCVRG_TEXT     Dependent coverage
          0EECTRBGRP_TEXT     Employee Contribution Group
          0ELIGGRP_TEXT     Eligibility Grouping
          0ERCTRBGRP_TEXT     Employer Contribution Group
          0PLANCATEG_TEXT     Benefit plan category
          0PLANTYPE_TEXT     Benefit plan type
          0PRGRM_GRP1_TEXT     Employee benefit group
          0PRGRM_GRP2_TEXT     Second Program Grouping
     0PA_BN     0HR_PA_BN_1     Benefits
7     0PA_CM     Compensation Management
     0PA_CM-IO     0ANNUL_REA_TEXT     Nullification Reason
          0AWARD_ATTR     Awards
          0AWARD_TEXT     Awards
          0CMP_TUNIT_TEXT     Units of time
          0COMPADJ_TEXT     Adjustment Reason
          0COMPAREA_TEXT     Compensation Area
          0COMPPLAN_TEXT     Compensation Adjustment Type
          0COMPSTAT_TEXT     Status of compensation adjustment
          0COMP_AWARD_ATTR     Long-term incentives plan
          0COMP_AWARD_TEXT     Long-term incentives plan
          0CP_CTYPE_TEXT     Cost Item
          0CP_PLAN_ATTR     Personnel Cost Plan
          0CP_PLAN_TEXT     Plan scenario
          0RATETYPE_TEXT     Exchange rate indicators
8     PE     Training and Event Management
     PE-IO     0ATTENDEETY_TEXT     Attendee type
          0ATTENDEE_TEXT     Participants
          0BOOK_PRIO_TEXT     Booking Priority
          0CONFIRMED_TEXT     Participation Confirmed
          0C_REASON_TEXT     Reversal Reason
          0EVCOSTINFO_TEXT     Charge Indicator
          0EVDOCSTAT_TEXT     Document Status with Last Billing and Settlement
          0EVENTEXT_TEXT     External Business Event ID
          0EVENTGROUP_HR02_HIER     Business Event Group
          0EVENTGROUP_TEXT     Business Event Group
          0EVENTSTAT_TEXT     Planned Business Event ID
          0EVENTTYPE_HR02_HIER     Business Event Type
          0EVENTTYPE_TEXT     Business Event Type
          0EVENT_ATTR     Business event
          0EVENT_HR02_HIER     Business event
          0EVENT_TEXT     Business Event
          0EVLANGUAGE_TEXT     Business Event Language
          0EVLOCATION_HR02_HIER     Business Event Location
          0EVLOCATION_TEXT     Business Event Location
          0EXTORG_TEXT     Company
          0EXTPERS_ATTR     External Person
          0EXTPERS_TEXT     External Person
          0FAILED_TEXT     Reason for Course Failed
          0FOLLOWUP_TEXT     Participation Followed Up
          0LEARNERTYPE_TEXT     Object Type of Learner (Object Type of Course Participant)
          0LEARNER_TEXT     Learner (Course Participant)
          0ORGANIZER_TEXT     Organizer
          0ORGANTYPE_TEXT     Organizer type
          0PASSED_TEXT     Pass
          0RESOUTY_TEXT     Resource (Object Type)
          0RESOU_TEXT     Resource
          0RESTYPEIND_TEXT     Resource Type: MRP Type
          0RESTYPE_ATTR     Resource type
          0RESTYPE_TEXT     Resource type
          0ASSESSMENT_ATTR     Course Test
          0ASSESSMENT_TEXT     Course Test Texts
     PE     0HR_LSO_1     Participation
          0HR_LSO_2     Participant Cancellation
          0HR_LSO_3     Resource Reservation
          0HR_PE_1     Attendance
          0HR_PE_2     Cancellation
          0HR_PE_3     Resource Reservation
          0TRAINCONTENT_ATTR     Course Content
          0TRAINCONTENT_TEXT     Course Content Texts
          0TRAINFORM_TEXT     Delivery Method
          0TRAINING_ATTR     Course
          0TRAINING_HIER     Course
          0TRAINING_TEXT     Course
          0TRAINTYPE_ATTR     Course Type
          0TRAINTYPE_HIER     Course Type
          0TRAINTYPE_TEXT     Course Type
9     PT     Time Management
     PT-IO     0QUOTA_TEXT     Reporting quota type
          0REPTT_TEXT     Reporting time type
          0TIME_STAT_TEXT     Employee Time Management status
     PT     0HR_PT_1     Times from personal work schedule
          0HR_PT_2     Actual personnel times
          0HR_PT_3     Quota movements
10     PY      Payroll
     PY-IO     0COUNTRY_ID_TEXT     Country Grouping
          0EEGR_ACCNT_TEXT     Employee Grouping
          0EEGR_FIX_TEXT     Employee Grouping Standard Acct Assgmt FM/GM
          0PY_KTTYP_TEXT     Type of Symbolic Account
          0SYMB_ACCNT_ATTR     Symbolic Account
          0SYMB_ACCNT_TEXT     Symbolic Account
          0WAGETYPE_TEXT     Wage Type
     PY     0HR_PY_1     Payroll Data
          0HR_PY_PP_1     Auditing Information for Posting Transfer
          0HR_PY_PP_2     BIW Extraction of HR Posting Documents
which ever do u wnat u can utilize.
thanks & Regards
sathsih

Compensation handler invoked by bpel console admin

Hello
I need to implement following scenario: bpel process generates user task with two possible conclusions: accept and reject. Process must allow bpel administrator to react on situation where user by mistake choose wrong task conclusion. Is it possible to use compensation in this scenario? Any other ideas?
Regards
J

Hi sreejit,
Restart your database. Probably there is some problem with the database.
or
Check your datasource connection details in EM-> JDBC connections.
Cheers,
Abhi...

Database connection timeouts and datasource errors

Connections in the pool randomly die overnight. Stack traces show that for some reason, the evermind driver is being used even though the MySql connection pool is specified.
Also, the evermind connection pool is saying connections aren't being closed, and the stack trace shows they're being allocated by entity beans that are definitely not left hanging around.
Sometimes we get non-serializable errors when trying to retrieve the datasource (this is only after the other errors start). Some connections returned from the pool are still good, so the application limps along.
EJBs and DAOs both use jdbc/SQLServerDSCore.
Has anyone seen this problem?
<data-sources>
     <data-source
          class="com.mysql.jdbc.jdbc2.optional.MysqlConnectionPoolDataSource"
          name="SQLServerDSCore"
          location="jdbc/SQLServerDSCore"
          xa-location="jdbc/xa/SQLServerXACore"
          ejb-location="jdbc/SQLServerDSCore"
          connection-driver="com.mysql.jdbc.Driver"
          min-connections="5"
          username="xxx"
          password="xxx"
          staleness-timeout="3600"
          alive-poll-query="SELECT 1 FROM medispan"
          url="jdbc:mysql://1.2.3.4:3306/dbo?autoReconnect=true&autoReconnectForPools=true&cachePrepStmts=true&is-connection-validation-required=true"
          inactivity-timeout="30"
     >
          <property name="autoReconnect" value="true"/>
          <property name="autoReconnectForPools" value="true"/>
          <property name="is-connection-validation-required" value="true"/>
          <property name="cachePrepStmts" value="true"/>
     </data-source>
</data-sources>

Rick,
OC4J 9.0.4.0.0 - BTW, do you know of any patches?As far as I know, there are no patches for the 9.0.4
production version of OC4J stand-alone.
I'm using container managed persistence,It was not clear to me, from your previous post, that you
are using CMP entity beans.
I found staleness-timeout and alive-poll-query
somewhere on a website when trying to track this
down. Here's four sources:Those sources refer to OrionServer -- and an older version, too, it seems.
Like all other Oracle products that start out as somebody
else's -- including, for example, JBuilder (that became "JDeveloper"), Apache Web Server (that became "Oracle HTTP Server") and TopLink -- their development paths diverge, until, eventually, there is absolutely no similarity between them at all. Hence, the latest versions of OC4J and "OrionServer" are so different, that you cannot be sure that something that works for "OrionServer" will work for OC4J.
I recall reading something, somewhere, sometime about configuring OC4J to use different databases (other than Oracle), but I really don't remember any details (since it was not relevant to me, because we only use Oracle database). In any case, it is possible to use a non-Oracle database with OC4J.
Good Luck,
Avi.

Possible to change the datasource from a business-view to a Sql Command ?

Hello,
When a business view contains a lot of elements it takes a while just to open the report.
We'd like to keep the BV as the dictionnary, but,
once the report design completed,
we'd like to disconnect the business view and replace it by the Sql command which can be seen in the menu option 'show SQL query'.
Is it possible via the RAS sdk ?
Did somebody experience this ?
How to proceed ?
Thanks a lot
Alain

Hi Ted,
I'm thinking opening a Case for this problem of opening reports based on a big BV.
We can't really reduce the BV, since it is the dictionnary and we need the whole thing...
I'm wondering why it is impossible to change the Datasource if the tables and fields underneath are identical.
Is it impossible to change the fields' mapping ?
The other solution, as you suggest, is to create a report from scratch, create a new Datasource with the Sql command format, and rebuild the report... I agree it looks like a big job...
Do you know if it is possible to export the report in XML for instance, change the XML, and then re-import ?
Thanks for your Help.
Alain

Getting following error while creating a datasource connection with oracle database.

I have 32 bit oracle server installed in remote server.
and 64 bit sql server 2008 r2 report server installed, and 64 bit oracle client installed on my report server while create a new datasource
in the report server i am getting this error
Error
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle
client components installed
How can i fix this and let me know the reason

This link will help you out.
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/0a38fa00-31de-49de-b68f-4c5a4565e5b1?prof=required
Milan Das

Error while creating datasource

I am getting this error while creating the datasource on console of html page.
java.lang.NullPointerException
     at weblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:1153)
     at weblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(EditMBeanAction.java:210)
     at weblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(EditMBeanAction.java:188)
     at weblogic.management.console.actions.internal.InternalActionContext.setAction(InternalActionContext.java:158)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:170)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)

well thankx for the inputs. well but te screen dosent move from tht point. as we enter a datasource name, it gives this error. and we havent logged into anywhr to give the access credentials.
am wondering how then whts the point in knowing the username and pwd if i give edit datasource .
thankx

Error while adding a datasource to an index

Hi,
I am creating an index with a file system repository. I have to create a taxonomy on that index to classify all the documents inside the repository. When i am trying to assign a datasource to the index i am getting the following error
"The repository needs the properties service to be attached to a classification index"
Can anybody help me?
Thanks in Advance
Prakash

Hi Prakash,
what you have to do is to edit the file system repository you want to assign as datasource to the index.
(Content Management -> Repository Mangers -> File System Repository -> Mark "Your FS Repository" -> Edit)
Go through the list of Repository Services (click on Next Page) and activate (mark) the "properties" Repository Service.
After saving and restarting! the J2EE Engine you should be able to add the datasource to the classification index.
Hope this helps,
Robert

Error while creating a datasource in planning 9.3.1 on oracle 11.2 database

I am unable to create datasource in planning 9.3.1 on oracle 11.2 database. I have configure sharedservices and registered planning with shared servers. I am unable to create data source after application deployment and instance creation.
I am getting the following error,
Launching Hyperion Configuration Utility Program
HYPERION_HOME: C:\Hyperion
In HspDBPropertiesLocationPanel constructor
In HspDBPropertiesLocationPanel queryEnter
Resource Bundle is java.util.PropertyResourceBundle@322394
Product Name in file is PLANNING
Availability Date is 20051231
Creating rebind thread to RMI
Resource Bundle is java.util.PropertyResourceBundle@322394
Product Name in file is PLANNING
Availability Date is 20051231
$$$$$$$$$$$$$ dname is
Resource Bundle is java.util.PropertyResourceBundle@322394
Product Name in file is PLANNING
Availability Date is 20051231
Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no HspEss
baseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at com.hyperion.planning.HspDSEssbasePanelManager.TestEssConnection(HspD
SEssbasePanelManager.java:156)
at com.hyperion.planning.HspDSEssbasePanelManager.queryExit(HspDSEssbase
PanelManager.java:132)
at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryExit(Prod
uctCustomInputPanel.java:114)
at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Sour
ce)
at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(Unknown
Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.notifyListeners(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
ce)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
But, My essbase server is up and running. I am able to connect it through EAS.

It looks like more of an issue with connecting to essbase, usually "java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path" means planning has not been installed or deployed correctly, what OS is it running on?
Cheers
John
http://john-goodwin.blogspot.com/

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error while transporting Datasources in Production

Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
Shalabh

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Compensation Datasources

Similar Messages

Maybe you are looking for