Compensation Survey Job code
Dear Users,
We would like to be able to load the full Job ID, 15 characters, and have this ID show up on reports, views and tables, currently we have to manually change the actual code, to reduce them to 8 characters, doing so we face problem when we try to compare the salary data to survey data. Please suggest.
Thanks
Hi Dilek,
thanks for the reply.
Basically I am working in PS.
I have a case whr when user is entering timesheet, he gets an error message, create a master record for 158312/DEF.
for this, basically we have to maintain rates in KP26 for Cost Center and act type.
If I check the PA20 record for teh user, he is assigned to
Cost Ctr: 158312
Job key: 30020, and
Activity Type: DEF
Here when I contacted with the planning dept to maintain rates for 158312/DEF, they told me that they use activity type DEF as the default and they never maintain rates for this. they told me taht Basically the job code is not mapped to an activity type, the only way we would know what the problem is, is to check the infotype 1 and 315 and the job code to activity type mapping table.
So I just checked with you guys to know which table they are referring too..
regards,
Madhu
Similar Messages
-
Job Pricing and Job code & Level
Hello Experts,
As per the SAP link below:
http://help.sap.com/saphelp_erp2004/helpdata/en/26/43dd7a51198c45b3181f5b3a067fa7/frameset.htm
it says that ....
Restrictions
The following key fields must be matched in order to utilize the survey data:
Job Code
Job Level (if this field is present in the survey)
Would you please share your thoughts what SAP job field do you match here for job code and job level. Is the job code on the survey provider file is equivant to the job object ID? Not sure. Also what would you match Job level to?
Thank you for all your responses.
saploverYou can check transcation code PECM_START_JPR_BSP
In addition, you find the entire documentation in the SAP Library under
SAP ERP Central Component -> Human Resources ->Personnel Management ->
Compensation Mgmt -> Enterprise Compensation
Mgmt -> Job Pricing.
only these should be matched
The following key fields must be matched in order to utilize the survey data:
Job Code >> map to internal position etc
Job Level (if this field is present in the survey)
These two values uniquely identify a survey job from a particular provider.
something like this
Click on PECM_START_JPR_BSP - Start Job Pricing
Select Import Survey
Use Survey Provider = Salary.com
Import the attached test file
Import data. -
Job pricing - job code & level
Hello ECM Experts,
As per the SAP link below:
http://help.sap.com/saphelp_erp2004/helpdata/en/26/43dd7a51198c45b3181f5b3a067fa7/frameset.htm
it says that in regards to job matching....
"Restrictions
The following key fields must be matched in order to utilize the survey data:
Job Code
Job Level (if this field is present in the survey)
Would you please share your thoughts what field from job do you match here for job code. Is the job code on the survey provider file is equivant to the job object ID (for object type = C)? Not sure if I should be looking for any other field.
Also what would you match Job level to? Is there any specific field from job related infotypes field that you have mapped.
I really appreciate for all your response on this.
Regards,
saploverYou can check transcation code PECM_START_JPR_BSP
In addition, you find the entire documentation in the SAP Library under
SAP ERP Central Component -> Human Resources ->Personnel Management ->
Compensation Mgmt -> Enterprise Compensation
Mgmt -> Job Pricing.
only these should be matched
The following key fields must be matched in order to utilize the survey data:
Job Code >> map to internal position etc
Job Level (if this field is present in the survey)
These two values uniquely identify a survey job from a particular provider.
something like this
Click on PECM_START_JPR_BSP - Start Job Pricing
Select Import Survey
Use Survey Provider = Salary.com
Import the attached test file
Import data. -
How to find out what are the interfaces used for Job and Job Codes
HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
SunnyHi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
Org. Unit & Job Code not diplayed in IT0001
Dear Consultants
I have a problem which is the Org. unit and job codes are not displayed in IT0001 although I did the following:
- Integration between PA and OM in T. Code OOPS was set in PLOGI ORGA first.
- Structure was created using PPOCE and PPOME then we hire employees through PA40 through LSMW.
- The employee hire date and the date of creating O,S, and C is the same.
- The data of Company code Personnel area and sub area was recorded in account assignment tab in Organization and Staffing when creating the structure and positions.
- After loading the Employee data I run the report RHINTE00 and the employees displayed in PPOME.
- Then I run report RHINTECHECK and there are no issues.
- Then when I see that Org. Unite code and Job Code are not displayed in IT0001 I report RHINTE30 but he said (Personnel numbers for which an update is not necessary) and still Org. unit and job code is not there in IT0001.
Is there anything else I can do to solve that problem?
Regards
KhaledDear Khaled,
please run the report
RHINTE20 Create missing objects (OM or PA)
RHINTE30 Transfer Org. assignment in batch input folder for infotype
Best Regards,
Deepak. -
Java Exception: java.lang.NoSuchMethodError -while accessing Job Code Table
Recently we upgraded tools from 8.51.03 to 8.52.12
when try to open data from below navigation.
Set Up HRMS--> Foundation Tables--> Job Attributes---> Job Code Table
then getting below error. Seriously doubt if a jar file is missing in PS_APP_HOME/class. Any clue?
Java Exception: java.lang.NoSuchMethodError: PeopleSoft.PeopleCode.Func.CreateSQL(Ljava/lang/String;[Ljava/lang/Object;)LPeopleSoft/PeopleCode/SQL;: during call of com.peoplesoft.hr.hr.cache.MetaCatalog.getObjectCatalog. (2,763) HCMD_CORE.metadata.ObjectCatalog.OnExecute Name:getJavaObject PCPC:1099 Statement:19
Called from:HCMD_CORE.metadata.ObjectCatalog.OnExecute Name:FindJavaObject Statement:177
Called from:HCMD_CORE.metadata.ObjectCatalog.OnExecute Name:FindObject Statement:212
Called from:WCS_SOURCE.Implementation.EmployeeInformationImpl.OnExecute Name:GetRecordField Statement:67
Called from:WCS_SOURCE.Implementation.EmployeeInformationImpl.OnExecute Name:CreateCache Statement:26
Called from:WCS_SOURCE.Impleme
The noted Java error was thrown during a call of the given method.
Error Codes
Java Exception: java.lang.NoSuchMethodError: PeopleSoft.PeopleCode.Func.CreateSQL(Ljava/lang/String;[Ljava/lang/Object;)LPeopleSoft/PeopleCode/SQL;: during call of com.peoplesoft.hr.hr.cache.MetaCatalog.getObjectCatalog. (2,763)
Problem Category/SubcategoryNot sure about 8.52, but in 8.51, I found the PeopleSoft.PeopleCode.Func class in PS_HOME/appserv/classes/peoplecode.jar, and CLASSPATH gets set to PS_HOME/appserv/classes by psconfig.sh
Not an answer, but it might give you some ideas on where to look.
Regards,
Bob -
Creating users with supplier, buyer, job code info.
I am writing a java app to create users in oracle apps.I am using apps api package fnd_user_pkg to create users,update users,add responsibilities.
I need to add some extra attributes e.g. supplier, buyer, planner, job code info while creating a user.Is there any api package like fnd_user_pkg which can be used to update tables with above info? or should i update the tables directly?Thanks for the reply. I was actually hoping the I-Chain/EDirectory variables would be available as CGI variables. Here are some of the CGI variables I tried to retrieve from the header. As you can see, only two contained values. There must be some other way to obtain these. I'd played around with CFLDAP, CFHTTP, etc. No such luck. But as mentioned, the IS dept says the values I'm looking for (UserID, Name, Location, etc.) are all being sent in every header (every response from the server). Am just not sure which CF tags/tools to use to capture them. Maybe it requires some special script. I tried a few of those found in the CF7 on-line help, but no luck in getting the scripts to run. If any other thoughts or suggestions, they would be much appreciated. Thanks again, Gary1.
<CFSET ValidSource1 = CGI.QUERY_STRING>
<CFSET ValidSource2 = CGI.HTTP_REFERER>
<CFSET ValidSource3 = CGI.REMOTE_USER>
<CFSET ValidSource4 = CGI.REMOTE_ADDR>
<CFSET ValidSource5 = CGI.AUTH_USER>
<CFSET ValidSource6 = CGI.REMOTE_USER>
<CFSET ValidSource7 = CGI.SERVER_NAME>
ValidSource1 =
ValidSource2 =
ValidSource3 =
ValidSource4 = 57.14.131.12
ValidSource5 =
ValidSource6 =
ValidSource7 = aometrics.xxx.com -
RHINTE30 is showing up a wrong job code in IT0001
Hi All,
Issue u2013 RHINTE30 is showing up a job code in IT0001 which is not even maintained at position level ever .
We have situation where RHINTE30 keep on updating IT0001 with a Job code, which is not even associated with the position ever. We have checked all HRP1000 and HRP1001 entries associated with that position but the Job code showing in IT0001 was never ever associated with that position.
So not sure how RHINTE30 picking up wrong job code.
Appreciate your help.
Thank you.
Regards,
SaurabhDear Christine,
Thank you for your reply.
I have checked in the system for user exits ZXPADU01 and ZXPADU02 but there is no defaulting happening for IT0001.
Also, I can not delete the created record coz the issue is occurring in Production system.
Please let me know is there anything that I am missing to check ??
I am trying to replicate it other system but not able to replicate completely.
Thank you.
Regards,
Saurabh -
Infotype 0008 check to Job code
Hi All !
I need to check the employee Grade with the Job code. For Example if the employee Job Is Assistant Manager / Manager / Senior Manager his Grade in infotype 0008 should not less than 32 or in range some where between 32 to 35. Any suggestion by standard as Dynamic Action not working .
Thanks in Advance
Regards
SBAYou can use IT 1005 in OM for this. Refer http://help.sap.com/saphelp_46c/helpdata/en/66/9bb8923aff11d189370000e829fbbd/content.htm
-
I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.modifyx(Unknown Source)
at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invokeTHanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code")); -
Hi,
Is there a way to see job codes (P0001-STELL) and pay scale group (P0008-TRFGR) together in one report?
Thanks,
William WilstrothHi,
You can use Adhoc query like
Transaction : S_PH0_48000510 or
S_PH0_48000513
Regards,
Devojit -
Job code not coming in profile identities in PeopleSoft
I log in to the application as PS. When I go to non-person profile and try to add a new non-person profile, the job code associated to betty locherty is not coming up in the prompt button. What can be the reason ?
Dear Khaled,
please run the report
RHINTE20 Create missing objects (OM or PA)
RHINTE30 Transfer Org. assignment in batch input folder for infotype
Best Regards,
Deepak. -
Job Pricing - Survey Job Description
Does anyone know what table in ERP the survey job description field is stored? This field describes the duties related to the survey job. Our intent is to try and include this in the BW cubes.
ThanksIsn't that related to the Survey Job Name? Example my Survey Job Number is AHR020 and the survey job name is Benefits, which is in the LTEXT as you referenced. What I am looking for is the actual job description of the job. Such as the following . . . Thanks
Supports general business operations by providing various administrative support activities. Coordinates delivery of office and business support services either internally or through an outsourced service -
Getting CI Error while Update Job Code Description :
Hi All,
Am getting the CI error (Error saving the component interface CI_CMP_RULE_DEFN for Rate Code Defaulting Rule) while try to update the Existing Job code description. But am able to add the new job code details .
The message catlog number MESSAGE_SET_NBR=1000 AND MESSAGE_NBR=1102 is getting trigger to throw the error.
Can any one help me on which scenario this error will occur.
Regards,
Hari AThis is called in JOB_CODE_TBL SavePostChange Function Update_Jobcode_Rule.
If (ciHasErrors(&ExceptionArray)) Then
/* Create an error because CI was not successfully saved. */
Error MsgGet(1000, 1102, "Message not found.", &RULE_ID);
ElseThe code is already passed the getci, so you do have permissions to start this CI, but the save was unsuccessfull.
See if you can try to find some more loggin in the appserver or run it in trace mode the see the actual error.
Hakan -
Differential - add to Job Code?
We have a newly created position where I need to figure a way to add shift differential ($0.50 per hour) to a job code. Ideally, I would like to add the differential hourly amoutn to a job code, then the regular & OT hours to multiply by this differential on the paylines per week. This may not be possible, but if anyone can offer assistance, I would greatly appreciate it!
What version of PeopleSoft HRMS are you using, and are you using Global Payroll or Payroll for North America?
Normally you would setup shifts in the shift table and connect them to earnings codes. The documentation for your Payroll product has the details.
Regards,
Bob
Maybe you are looking for
-
How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari". I cannot download this software bc
-
Feed Not Working -- file problems?
Hello, I am having some problems with my feed downloading. I had it working a while ago, but then I've deleted my only episode and started anew. I've checked with feedvalidator and it's ok... but I don't understand why it's not working now. I thought
-
Print preview for the special characters / symbols
While displaying print preview / taking print output using QGA3 Transaction with developed Z SAPScript form specified as one of the parameters(say for example ZARMEXP), the special characters / symbols like u2018∆u2019 are displayed as u2018#u2019 i
-
According to the Developers guide in flexbuilder 2 you can use the videodisplay control to stream video. The code they show is this: <?xml version="1.0"?> <!-- controls\videodisplay\VideoDisplayCamera.mxml --> <mx:Application xmlns:mx=" http://www.ad
-
Error in MSS PCR (ISR)
Hi, I am trying to use PCR functionality in MSS 1.0. When I try to view the adobe forms for ISR in the backend ECC 6.0 system, the forms are displayed fine, but when I try to access the PCR scenario in MSS, I get a runtime error. When I check the def