Competence Requirment - Do we have different API's for for each requirment level (BG / Organisation / Job / Position)

Do we have different API's for each level of competence requirement (BG / Org / Job / Position) ?
Thanks,
Sri

Please look into my profile at linked in https://in.linkedin.com/in/prashantpatel21 I m interested.
Regards,
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

Similar Messages

Competence Requirment API - Do we have different API's for BG / Org / Job / Position ?

Do we have different API's for BG / Org / Job / Position ? If yes please let me know
Regards,
Naga
<mod. action: removed personal email id>
Message was edited by: Nicolas.Gasparotto

Hi Theo,
we've looked at the data you sent me and found that we already ran into this issue even before the first productive release.
The good news is that the problem should be solved already with the first release SAP NetWeaver CE 7.1 EhP1 SP1 Patch 0.
The bad news is that if you initally created the process and modeled the mapping with the Beta release (which contained this bug), false model information was written into the project files. So the problem is not solved by re-compiling the project with a newer NWDS.
Can you please check whether this model was created initially with the Beta version? If this is the case, I'm afraid you'll have to re-model the process with the productive release from scratch.
If you are sure that you modeled this from scratch with the official (SP1) release, please open an OSS ticket for this.
But I can put your mind at ease on one point: your use-case does not fall under a product limitation. This should work with the productive release, and if it doesn't, it's a bug that needs to be fixed.
Best regards,
Oliver

How to setup 9ias so that we can have different profile to cater for 2 DADs

Dear Sir,
How to setup 9ias so that we can have different profile to cater for 2 DADs with the same name pointing to different database.
For example:
/pls/users --> pointing to database 1
/pls/users --> pointing to database 2
I would like to know, how possible is it.
Reason being we would like to deploy both our live and demo plsql application on same application server without the need to change all the dad path to:
/pls/users -- pointing to database 1
/pls/usersdb2 -- pointing to database 2
In other words, we would like to preserve the same DAD name in both live and demo application to minimise unnecessary changes to application.
Please advise.
Thanks.

Follow the directions here:
http://support.apple.com/kb/ht2534

Am creating document with Pages. pages are in "portrait" orientation, but two charts at end need to be "landscape". changing the orientation for one section changes it for entire doc. can i have different orientations in Pages for different sections?

am creating a document with Pages. all pages using "portrait" orientation, except 2 appendices need to be in "landscape". in Word for Windows it is possible to have different page orientations for different sections of a document. is that possible with Pages. Even when i put the appendices in a different section, changing the page orientation changes it for the entire doc.

Make a separate document the size and orientation you want.
Turn that into a pdf and add it back into the original Pages document or into the pdf from from that document.
Peter

On my shared computer, can my sister and I share the same itunes library, just have different accounts to pay for music?

I am inquiring about the question, does someone have an answer, and if its possible, how do I do that?

Have a look here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html

How to have diffenrent automatic number sequences for diff OU projects ?

Client requirement is to have different project numbr sequence for diff OU's in the same BG . How can this be implemented?

Hi,
The Project number has to be unique across the OUs. But Iam not sure how you will achieve it. Since having different sequence numbers will cause issues(it will create overlapping project numbers and hence you will not be able to create a project)
But technically it is doable. The way is given below. But it may cause issues in having project number to be unique across OUs.
1. Make the Project Number 'Manual' for all OUs.
2. Create one sequence for each OU.
3. When creating Project through Forms/OAF, use custom code to populate the project number automatically
by accessing the correct sequence, depending upon the OU.
This is just a thought. Let me know if this works.
Have fun !!
Sathish
www.projectsaccounting.com

Annoying Bug ('feature'), requiring video to have audio (or not) to import!!

There are several occasions where I'm in the middle of a job and I wish to change, say, a video. I have some other video that can directly overlay it. Premiere Pro CS3 (as opposed to older versions) will not let me relink a video in my project to another video unless they both either have audio, or do not.
Why?
Why do you care, Adobe, if both videos have audio?
Why do you care if they both don't?
I think I can make my own decisions based on if they have audio or not. 99% of the time, I don't use the audio in the clip as it it, so please stop failing my re-linking of a video based on if they both have audio or not. That's for ME to decide if it's "ok" to replace.
Just remove audio off the timeline if the video I relink to does not have it. Vice versa, do NOT put the audio on the timeline if it DOES have it and my original video did not. This is not difficult, this is expected behavior, and having to re-create videos so they match audio-wise is insanely counterproductive.

Not true. In fact most of what you describe I was able to achieve. I tested it now and it worked fine. What exactly are you doing to relink a clip?
I already explained this but, no, it's not working for you, you must be doing something different entirely. Once my machine is done rendering in after effects I'll post a screenshot, but I already explained this. To reproduce this problem the steps are simple:
1. Import a video with mono audio
2. Place on timeline in any sequence
3. Right-click on the video in the Project Library, Make-offline
4. Right-click on the video in the Project Library, select link the video, choose
some other video clip with stereo audio, or no audio
You will get an error that the source video has a mono audio channel and cannot be replaced by a stereo (or no audio) clip. It will fail. Every time.
Then hold down ALT and replace the audio/video with a track from your bin.
This is an entirely different thing than what I'm doing. Replace clip is not my solution, and is limited as I posted about earlier.
This is natural of course. You cannot expect Premiere to match and keep internal In & Out points for clips that have different total durations. Also each clip has a different timecode In Point seperate from it's duration.
Ahhh.. The good old "assumption" screwing everything up.
This is not the case, all the time. My
videos are identical. That is, exact resolution, exact time (down to the frame count), etc. The only difference is in the content in the video itself (text and visuals). They are an
identical video as far as the computer is concerned,
only differing in audio. And premiere things this is a good enough reason to refuse relinking.
And honestly, even if the duration differs, there are better ways of dealing with it than just outright failing. So what if the in and out points are out of range for a clip I'm replacing it with? Just use the 'video offline' effect or create a new visual indicator that the timestamps are invalid for the range, but
work for the
valid timestamp ranges. Then I can wholly replace clips easily with other clips to see which I like better, without making me re-create my keyframing effects.
Again, this is not my problem, I don't like or care to use replace clip. I am trying to RELINK files, which as you said, is a completely different thing. I am not confused, I have been using premiere for as long as anyone else here. This is a valid issue that older Premieres did not care about, and rightly so.

I am doing a cover for O.M.G. by usher and it requires 4 to 5 different vocal layers. My first "line" of vocals keeps disappearing even after i save it. So I have to redo everything on the top line. Any help?

I am doing a cover for O.M.G. by usher and it requires 4 to 5 different vocal layers. My first "line" of vocals keeps disappearing even after i save it. So I have to redo everything on the top line. Any help?

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

We have a requirement to have different Absence type be simultaneously created

Hi Gurus,
We have a requirement to have different Absence type be simultaneously created.
Meaning, different absence type on the same day be recorded.
We can change of course the Time contraint but when running payroll.
It throws the error in function GBSXP Overlapping absences, Check IT2001.
Is there a way to get around this function?
If you ask me, i'll have the two absence type be not created simultaneously.
Greatly aprpeciate for any inputs.
Thanks.
cris

Check the Time Constraint of these Absences in table view V_554S_O
Please also do a little search on the web as there are many discussion threads on the subject, on this site an on other sites.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

HT204053 My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

The recommended solution for most families is to share the same Apple ID for iTunes and App Store purchases, so you can share your purchases, but us different IDs for iMessage, FaceTime and iCloud. With this arrangement, each person can automatically download purchases made on the shared ID (by turning this feature on in Settings>iTunes & App Stores), while keeping their FaceTime calls, text messages and iCloud data (including photo stream) separated. There is no requirement that the ID you use for purchasing be the same as the ID you use for these other services.
This article: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

Weblogic 12g Server - EAR with WAR - how can I have different XML parsers

Hi All,
I have a requirement where I need to have two different XML parsers in the same enterprise application.
By backend Spring container require a XML parser and my JSP code which has XSLT logic require another XML parser.
If I specify -D System property then it is applied to the whole Enterprise application. Instead I want a way to specify different XML parsers one for Spring backend container and the other for JSP pages.
I am deploying my application in Weblogic and it is an EAR file.
Thanks in Advance,
Kishore Veleti A.V.K.

check this one.
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl

Cash account is required. Choosing a different account may cause inaccuraci

"A cash account is required. Choosing a different account may cause inaccuracies in the cash flow report. Continue?"
I am getting this warning when doing a deposit(credit card). I have never got this message before. Recently upgraded from 2007A SP0 PL47 to PL49.
Why am I getting this error? Usually credit card account should NOT be defined as a cash account. Why is it telling me that I require a cash account for a credit card deposit?
Steps to reproduce:
Banking > Deposits > Deposit
Select Credit card tab > Enter bank account and deferred payment account (both are accounts which are NOT marked as cash accounts).> Click on u2018Addu2019.
Get message: A cash account is required. Choosing a different account may cause inaccuracies in the cash flow report. Continue? Yes.
JE created looks like this:
Credit card clearing account CR
Bank Account DB
Both accounts are NOT marked as cash accounts.

You may check this article to get more info regarding this warning message:
http://wiki.sdn.sap.com/wiki/display/B1/Whydoesthewarningreferringtothecashaccountappearwhenmakinga+payment.
Thanks,
Gordon

How to Apply adjustment layers to multiple layers that have different blending modes ...

How to Apply adjustment layers to multiple layers that have different blending modes and keep the colours the same as the adjusment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.
I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY.    IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
HEres an example of a simple File. to show what i mean.
https://dl.dropboxusercontent.com/u/3408266/ball%20layers.jpg
https://dl.dropboxusercontent.com/u/3408266/ball.psd
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.
I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking efffect exactly how i looks before i apply the adjustment layers?
Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be seperate!
I'm assuming what I want to do is impossible? Hope this isnt confusing. As far as i know its impossible to do what I want it to do. but just wanted to ask and see.
I would REALLY REALLY love to talk to a adobe programmer/ technician/pro working at adobe about this. Theres just no way to get in touch with anyone... =(
any thoughts ?

Sure... if you want to put it that way. Either way its not the desirable outcome.
its just frustrating that theres no way to apply adjustment layers to hundreds of layers while keeping them in the same configuration ( blendmodes, layer order , without merging) while keeping the same end result.
works great if all your layers are set to normal though..    But I really need to keep shadow layers seperately and be able to adjust on the fly aswell as apply those adjusment to all my layers.
I suppose that just isnt possible.   I understand the math required for this would be tremendous/ complicated if something like this would ever be implemented. Would be nice if adobe could come up with some solution to this. Its really a huge issue in my work flow and theres no alternatives.    How else can I adjust colours to 100+ layers with a few clicks that lets me play around the the adjustment until im happy with the outcome.    Really wish i could adjust and the quickly apply that adjustment to all my layers regardless of blend mode.   LIke If the Layers with blendmode could somehow take the properties of the adjustment layer and keep adjusting those layers undereathe on top of that blended mode that its doing...

Abstract method which when implemented will have different parameters

Hello to all,
I have an assignment but not looking for someone to do it for me. I am only searching for a suggestion on how to do the following.
Imagine having an application that needs to provide an estimate of the rent for different buildings.
Basically I start with by having a class name Building. This class has an abstract method called estimateRent.
I then create two classes that extend the class Building which are named Apartment and House. Both need to have the method estimateRent.
However the problem is that the rent for the Apartment is calculated on the nights passed in the flat and the people in it, while the rent for the House is just calculated on a month bases.
This means the estimateRent method requires to have different parameters depending if it is implemented inside the Apartment class or the House class.
Now I only know of two options.
The first option is to not declare the estimateRent method as an abstract method inside the Building class and just implemented inside the Apartment and House with different parameters. I do not like this option since in the future if a new Building comes in then I would like to impose the fact that that object needs to have a calculate method.
The second option is to make the estimateRent method as abstract inside the Building class however takes a parameter of either a String array or else a Map. Then the estimateRent within the Apartment class would search for the elements tagged as nights and people, and the House class would only search for the elements tagged as months!
However do not know if there are any other, better ways on how to do this. I am using Java 1.4 however if you only have answers for Java 5.0 then please post them again since I always like to learn something new :)
Thank You for any comments.
tx

The implementation changes, yes.Yes that I could understand in the Strategy Pattern (in the document I read it was being compared with the Template Pattern).
Then you need to refactor your design.I tought about that, however if you read my first post you will notice that I have different criteria on which the costs need to be estimated. While the costs for a flat are estimated on the people staying in and nights slept there, the costs for the house are based only on the months stayed there regardless of the people living in. Now for me I feel that it is bad programming practice to create one method that can have all the parameters required for any scenario. I mean the following is NOT something I am going to do:
estimateCosts(int nights, int people, int months ... etc);
That's not a very elegant way of going about it.
What is the "Context" going to have?Yep I agree, but so far my limited brain has only come up with that! I am open to any other sugestion! always if i understand it first!
Basically the Context would better be named as Criteria and it would be an interface as follows:
interface Criteria{}
Then I would create two classes that implement the Criteria object as follows:
class AppartmentCriteria implements Criteria{
public Result estimateCosts(int nights, int people);
class HouseCriteria implements Criteria{
public Result estimateCosts(int months);
Now when I recieve the inputs, depending on the scenario the Criteria is typecasted and the correct parameters passed and we recieve the Result.
I feel the above sucks since I am not seeing it as an object oriented way of doing this out! Is there any other sugestions! The refactoring thing I am intrested in! however really I can not see how such a call to that method could be refectored!
Thank You,
tx.
PS: Sun has blocked my other account as well, and this time they did not even send me an email to confirm that I was registered successfuully :( Is there someone I can contact on this? I guess next time I will reply with tx53m :)

Competence Requirment - Do we have different API's for for each requirment level (BG / Organisation / Job / Position)

Similar Messages

Maybe you are looking for