Compilation of Lenovo X120e issues and solutions

Just thought a compilation of issues may be beneficial for folks who own an X120e.
Screen adjusts brightness automatically without user input depending on content on screen:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X100e-screen-brightness-increasing-by-itself/td...
This is caused by Vari-Bright being enabled in the Catalyst Control Center. With this option enabled, the screen will automatically adjust its brightness depending on what is shown on the screen. The display brightness is increased when the screen is predominantly white while the display brightness is decreased when the screen is predominantly dark. An easiest way to see this effect happening is to have two tabs opened in a web browser window. Set one tab to display a website that is mainly filled with white pixels (such as this Lenovo Forum) and another tab to display a website that is mainly filled with dark pixels (such as http://www.krijtenberg.nl/ ). Switch between the two, pausing a few seconds in each tab.
Solution:
Open the Catalyst Control Center and select the PowerPlay option in the Power section. Uncheck the Vari-Bright option (or adjust the slider) and click Apply. Verify that the automatic adjustment is no longer occuring by doing the two tab experiment described above.
Function keys for brightness control not working after waking from sleep / hibernation in some instances:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Funtion-keys-for-brightness-not-working/t...
For my X120e, whenever I have it sleeping or hibernating and change the power source (such as initiating sleep when on power and then waking it up while on battery, or vice versa), the function keys for brightness controls do not work.
Solution:
Restarting the machine will bring back functionality of the brightness control keys...
A way to prevent this from happening in the first place is to wake the X120e in the same power state that the X120e was put to sleep in (wake up from power adapter if slept while connected to power adapter, or wake up from battery if slept while on battery).
All we can do now is wait for Lenovo to come up with a fix on their side of things.
AMD SATA Controller and TRIM for SSD:
The AMD SATA Controller provided by Lenovo does not support passing of TRIM command according to http://www.hardwarecanucks.com/forum/450343-post35.html for SSDs. The Lenovo provided AMD SATA Controller is 1.2.1.197, before the official TRIM support in 1.2.1.263. If you're using a HDD, this is of no concern.
Solution:
In order to have support for passing of TRIM command, one has to update the AMD SATA Controller to any version above 1.2.1.263 ( http://sites.amd.com/us/game/downloads/Pages/integrated_win7-64.aspx#3 for Windows 7 64-bit, for example) or uninstall the AMD SATA Controller to revert back to Microsoft's Standard AHCI 1.0 Serial ATA Controller.
Disclaimer: Since the AMD SATA Controller driver linked is not from Lenovo themselves, I'm sure they won't provide any support if something is to occur so try at your own risk.
As HP79 mentions below, at least according to the update notes, TRIM implementation is implemented for Hudson chipsets as of 1.2.001.263.
Audio Stutter / Slurring occuring during playback of video/audio:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Stuttering-Audio/td-p/389023
This issue can be reproduced (at least on my X120e) by waking the X120e after putting it to sleep. The symptom is the audio repeating a sound over a span of a second or two during playback and is quite noticable.
Solution:
uEFI Bios version 1.11 seems to deal with the audio stuttering issue. So far, results lead to positive outcomes.
Old Solution:
PWMTR64V.DLL that is loaded at Startup seems to be causing this issue. Disabling it from launching when starting up seems to cure the Audio Stutter (even after waking up from sleep which was seen to be a pretty reliable way to get the issue to repro). Start Menu > Launch MSCONFIG from the Search Bar > Select Startup Tab from the System Configuration window > Uncheck Thinkpad Power Manager > Restart.
This does not seem to turn off the power manager application itself so settings in Power Manager can be saved and it seems to still be in effect. However, opening up Power Manager from the notification / taskbar can cause audio stuttering and mouse movement slowdown while it is launching and/or when applying settings. This is only temporary and is gone when Power Manager is closed. (Thanks kns7977 for the find)
Pending to see if those who uninstalled Power Manager are able to turn off the offending startup .dll.
Mouse seems to stutter or stay in place for a moment when moving:
This seems to be caused by the same issue causing the Audio Stutter / Slurring. At least at this time, the cause of the issue and solution seems to be the same.
Emulating Middle Mouse Button with Trackpoint:
One can set up the middle button between the left and right click button for the TrackPoint to act like pressing a middle mouse button on a standard mouse by changing the scrolling type to Smooth instead of the default Standard.
Control Panel > Hardware & Sound > Mouse > UltraNav Tab > Setting for TrackPoint > Setting for Choose Scrolling or Magnifying Glass Function > Smooth.
Trackpad's two finger gesture being hit or miss:
The trackpad's two finger scrolling is very hit and miss.
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X120e-Touchpad-issues/td-p/393751
Solution: Turning off Gesture Filtering may alleviate the problem. As mentioned in http://forum.notebookreview.com/lenovo-ibm/561751-x120e-owners-thread-24.html#post7323293, it seems that the Gesture Filtering is counteracting any sort of two finger input.
Get to Mouse Properties by Fn + F8, select Manage Settings. At Mouse Properties, select the UltraNav tab > Settings for TouchPad. Expand the Smart Check Settings, highlight Gesture Filtering, and uncheck the Enable Gesture Filtering box and Apply.
Screen flickers lines:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Flickering/td-p/389523
Had this issue occur on me once, but never seen it happen again. Unsure what caused or cured it.
Solution:
If the flickering is occuring, a restart is all that is needed to alleviate the problem. Haven't tested if hibernation fixes it, but neither sleep nor turning off the screen with the Power Manager dealt with the flickering.
3-Cell Battery mentioned as a 40Wh in the Order Page of Lenovo X120e when it is actually rated as 32Wh according to Power Manager:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X120e-3-cell-40Wh-battery-reported-as-32Wh-by-P...
Yeah...
Solution:
Accept that it's a 32Wh you will get when selecting 3-Cell or go for the 6-Cell if you want more than 32Wh.
2x2 ABGN Driver from Lenovo triggering Error Code 10:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X120e-ABGN-Driver-issue-in-Windows-7-Pro-x64/td...
The Wireless driver from Lenovo's site seems to not work with the 2x2 ABGN wireless when installed on a fresh copy of Windows 7 x64.
Solution:
Not really quite a solution, but one can bypass this by either installing the 32-bit Windows 7 and installing the 32-bit driver, or using the factory recovery disc to install 64 bit windows 7 to have it install drivers that work for x64 windows 7.
X120e bluescreens after installing LAN Realtek 7.26.902.2010 drivers from Lenovo's Driver download site.
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-bluescreen-when-installing-lan-drivers/td...
The drivers doesn't seem to work and it causes a bluescreen on fresh installed Windows 7 x64.
Solution:
As Clicq suggests, Realtek's own drivers from http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy... seems to deal with the issue.
Screen quality on the X120e:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-poor-LCD-quality-viewing-angles/td-p/3945...
The quality of the screen on an X120e is below expectations.
This is common with low-quality TN panels not helped by glossy displays. My personal X120e screen likes to bleed certain colors of red.
Solution (not really):
One can use the Windows 7 built-in color calibration tool to adjust the colors to make it more tolerable. Adjusting your own viewing angle in relation to the screen might deal with some color issues (hard to figure out what's the correct viewing angle because of TN panel's small range of optimal viewing angles). Also, changing the refresh rate to 60Hz may deal with some headaches due to the screen (as it did for me).
HDMI Overscan to HDTV issue:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/HDMI-overscan-to-HDTV-issue-on-x120e/m-p/395335
There is a black border when outputting to HDTV through HDMI.
Solution:
AMD's CCC by default sets a specific value for overscan / underscan. One can http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Output-to-TV-via-HDMI-port-black-border-on-the-... while the device is connected via HDMI (the option is hidden if the HDMI port is not used) and adjust the slider to an acceptable value.
Skype asserts after 10-20 seconds of video chat:
http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Skype-quits-after-10-20-seconds-of-video/...
When doing a video chat, the video feed will freeze and then skype will crash to desktop.
Solution:
Version 5.3 of Skype seems to be the culprit. Until Skype itself is fixed, one can use Skype 5.2.60.113 from http://www.filehippo.com/download_skype/changelog/9465/ to bypass this issue. Just reject any offer to update to 5.3 after installing 5.2, for now.
If there is anything I missed, please respond and I'll update this post with new information. These are the ones that I have encountered so far with my Lenovo X120e. Don't get me wrong, I like my X120e... it's just been a "learning" experience lol
For a compilation of most X120e issues:
Compilation of Lenovo X120e issues and solutions

About the AHCI driver, if you download and open the install file, it'll extract files to where you instructed it to. Look in AMD SB7xx/W764A directory, and there are the AHCI files along with a text file. In that text it shows
AMD AHCI controller driver distribution list
Version 1.2.001.0275, 11/11/2010
Supported chipsets
SB700 family
SB800 family
Hudson-1/2/3 family
Revision History
1.2.001.0275
-          Memory usage optimization
-          ZPODD power on incurred 10 sec delay workaround
-          Potential DMA overrun bug fix
1.2.001.263
-          Performance optimization
-          Boot Optimization
-          TRIM implementation
1.2.001.0238
            Renamed
-     amdsata.inf -> amd_sata.inf
-     amdsata.cat -> amd_sata.cat
-     amdsata.sys -> amd_sata.sys
-     amdxata.sys -> amd_xata.sys
Added
-     Zero Power ODD support (if enabled in BIOS; Windows 7 only); the ZPODD is powered off after 60 Sec w/o media inside and tray closed (for tray type ZPODDs)
-     DAPS support
-     DIPM Setting Index 3 added to AHCI Link Power Management Settings (in addition to existing Active(0), HIPM(1) and HIPM+DIPM(2) ) and can be chosen to any Power Scheme using the inbox utility powercfg.exe
1.2.0.197
-     Robustness improvement during hibernation / de-hibernation

Similar Messages

E55 e-mail issues and solutions.

The main problem of Nokia E55 e-mail (and AFAIK generic Nokia e-mail problems) is there are too much support for email but poorly documented. I just discovered everything I'll write here by my own trying to figure out the problems. This message is also a bug report if Nokia cares.
First, there are many ways to setup an email account (or mailbox in Nokia jargon). Just to name the ones I know:
(Assumption, you got some internet connection.)
1. Go to Control panel, settings, general, personalization, one touch keys, messaging key, short press and select email setup. Then close the menu and short press the messaging one touch key. An application will start, check for connection and then asks for an email address. If you continue, you'll see that the setup options are few and useless. If you check the task manager by long pressing the menu button, you'll see a @ sign.
2. Go to menu and select email to start Email 2.1.0 application. Select "new" and settings wizard will start then it starts a screen with email on top. Then, you need to press start and it will show you some commercial (free or not, but commercial) email options together with "other" option.
2.a. If you choose any commercial email provider (e.g.. gmail) and enter your address and password, the application will "detect your email settings" which means your phone will communicate with a nokia server and the nokia server will log in for you as a man-in-the-middle. Then, the application will download a contract in your language and ask to sign it. If you don't accept see 2.b, if you accept the contract, it means the "Nokia Messaging Service" will be enabled. Nokia messaging service is hosted at http://email.nokia.com. (A very bad, confusing name) From now on, NOKIA WILL KEEP YOUR EMAIL PASSWORD (with some poor privacy act based on the unbalanced contract) and Nokia will access your mail in your name, Nokia will be able to change your email settings, Nokia will be able to delete your email messages Just like the well-known man-in-the-middle attack in crypto courses. (See TR's note of Aug 26, 2010 18:18 at http://noknok.tv/2010/05/26/how-to-set-up-nokia-messaging/)
2.b. If you decline the contract or choose "other" that Nokia doesn't know how to access your account, then the application won't enable Nokia messaging service (*) and the application will enable the email access protocols already installed on your phone. Thus, you'll access your email directly and Nokia will not keep your email password. In that option, you may need to enter more server settings. But IMHO, it worth it.
(*) Oh, yes. This is a very good point. If you're willing to use the Nokia Messaging Service but doesn't have a commercial account, you can't enable it. At least, you can't enable it as you pay. E55 includes fuzzy-lifetime service agreement. If you go directly to the site and sign up yourself online, you'll get a trial service agreement. Not the full service you've already paid. (See TR's notes above to understand what fuzzy-lifetime is. Shortly, you can enable it just once for just one person but not for each person using the same phone.)
3. This is the tricky one. I found only one way to configure my email in that way but it has the most detailed settings for your account and it connects to the server directly. Bad news is, you can set only one mailbox up with that method. Go to menu, messaging, options, settings, email, options, new mailbox, start, enter your address and password, choose imap/pop, enter server settings, save. You'll see the default mailbox box will change. (But you won't see the mailbox in the messaging application [the app we've started by selecting menu then messaging]. I don't know if this is a bug or a feature.) Suddenly, the Email 2.1.0 application will start and it will try to take the control of your mailbox. Don't let. Selecting options, exit close that application. You'll be in the messaging application's menu again. Another options, exit closes this application too, and will take you to the main screen. Now, the tricky part. If you go and check Email 2.1.0 application, you'll see your mailbox is there. If you go to the messaging application, it won't show you your mailbox. Still, if you go options, settings, email, you'll see your mailbox as the default. Ok, who cares. Now, the settings. If you shortly press the email one touch key, you'll see your mailbox in the messaging application. If you select options then Email settings you'll get hell a lot of settings to set your mailbox. This is the only way I know to see the "Email settings" menu item and set the mailbox in detail. Remember that, there are projections of these settings on the Email 2.1.0 application's menu with less options.
There may be other setups for exchange and so on but I didn't check that options. These were already enough for my brain to explode.

Continues...
The third solution is the native solution, I think (as it doesn't support html messages and Nokia Email 2.1.0 and Nokia messaging service are marketed to be able to read HTML messages).
Another issue of the third solution is that the settings in the native messaging application and the settings in the Email 2.1.0 are sometimes conflicting. So you need to crosscheck them after you set up.
Nokia hardly have IMAP-idle support. So, don't trust on it. The very basic example of such is, you seem to be connected with the fancy green circle at the top right but when you try to read any email, you'll be asked to connect to internet continuously and you won't be able to fetch or read the message.
I checked many IMAP server logs to realize this issue. The problem is, as Nokia doesn't keep the credentials and disconnect from the server way too early, server generally interprets it as "remote party disconnected". And if you ask to fetch something again the second time, it creates an SSL 41 error (certificate not found) and closes the connection.
(Yes, I got SSL installed in my mail server. I think nearly everybody has it in these days.)
Another thing is about the "Nokia messaging service" It has hardly any customer support and it goes offline from time to time. Sometimes, you cannot reach the server even from your PC or if you can reach, you cannot configure anything.
For example, it is possible that it creates an account for you that you aren't aware of. The account creation is automated and the username/password pair is set as the first email address you've logged in with your phone. Sometimes people are unaware of this and when they change their passwords on their accounts, their email suddenly gets disconnected. Also, sometimes they cannot remember their old passwords or their old mailboxes not in use anymore.
Second, it maps many personal data altogether, which is against privacy. I realized this issue by practice. Here is my story:
I got an mail account,say [email protected] and I created a nokia messaging service account with this email. This is normally a "trial period" subscription of which the username/password pair is identical to my mail account. Namely, [email protected] and some password. I also added my second email account, [email protected] to my nokia messaging account. During account creation, the site asked me about my phone number.
Then, I bought E55 which has lifetime nokia messaging service subscription. I switched on my brand new E55 and try to configure my email. By chance, I started with [email protected]. So, Nokia created an [email protected] nokia messaging account for me. (I realized that account creation afterwards and it was a phone-lifetime subscription.) Then, I added my second email [email protected] on my phone.
What the duck, everything was scrambled. After I realize the double Nokia messaging accounts issue, I decided to delete the old one, which was a trial. At the end, I actually got a lifetime. So I logged in to the service and cancelled my first account. What do you expect? Nokia messaging service deleted both of my accounts and all email messages from both of my phones. I was lucky that I backed them up recently. I can't imagine to lose all my business mail because of the poor and ill policies of Nokia. Moreover, now, I can't get another phone-lifetime subscription to the service in the first week of my phone. Very nice...
Still, I got the third issue. I mentioned that I was checking my servers' logs to understand what's going on. After I tried to delete one (but practically deleted both) of my nokia messaging accounts, there shouoldn't be any references to my servers. Do you think so?
These are some of the IP's trying to connect to my mail server even after the messaging accounts are deleted:
131.228.18.22
131.228.18.67
131.228.18.30
131.228.18.40
When you check them at geo locator, they're all in Finland... Very nice... The only way I found was changing all my accounts passwords to get rid of the great and fancy Nokia eavesdropping service. After that, these IP's started to try the same password to log in. Currently, Nokia is trying to log in 6 times every 15 minutes to my mail accounts. I don't know when they'll stop trying. They're like terminators, they never give up.
Advice: IF YOU EVER SUBSCRIBED TO NOKIA MESSAGING SERVICE, JUST CHANGE ALL YOUR EMAIL PASSWORDS ASAP.
The fourth issue is about the setup process again. If you connect to the internet during setting up the email (Second option above), wizard runs so slowly, because it is trying to connect to the Nokia server (to send your username and password to Nokia databases).
This is probably one of the reasons why people end up waiting for minutes and cannot get a mailbox at the end.

Getting an error message, "unknown authentication issue" and solutions have only made it worse.

When trying to publish with Muse, get error message, "unknown authentication error has occurred using your adobe id. (shared unknown error)". Support site said to delete OOBE folder. Did that and got an error when opening Muse that says to redownload application manager. Go to that page and it says to redownload the adobe cloud desktop. Still getting both errors. ???

Please refer to the following link
An unknown authentication error has occurred using your Adobe ID (AUTH_UNKNOWN_ERROR)

Security nd Cache Management issues and solution required

scenario 1: Cache Mechanism implementation
We have to develop a report which will populate the data from Cache for previous months and from database for current month simultaneously.
Scenario 2: Security (users/groups) implementation
We have to implement the authorisation on 20000+ roles (groups) in OBIEE. They want it to be implemented internally in OBIEE using some script/API so that all the roles will be created and as well as updated automatically in OBIEE whenever there are some updations in their database.
Question 1: How is it possible to manage more than 20000 roles (groups) , each role is having different different privileges ?
Scenario 3: How can we switch on or off row-level-security for different reports (As in some reports, data does not need to be restricted)"
Example: A single report has a summary page and a detail level page. Summary page can be seen by everyone whoever logs on to the BI portal and accesses the report but when the user clicks on a figure on summary page to drill to detail he sees only his data that he has access rights to.

Rahul1982 wrote:
scenario 1: Cache Mechanism implementation
We have to develop a report which will populate the data from Cache for previous months and from database for current month simultaneously.
Hi,
I am using ibots for this, after etl time has finished, send an email (at night) about the related dashborad, so users can reach quickliy from the web site in the morning.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

User synchronization issue between Active Directory and Solution manager.

Requirement:
Synchronize the users between Active directory and solution manager system.
What we did:
1. Created RFC connection (LDAP_RFC) for LDAP connector.
2. Created new LDAP connector that utilize the RFC (LDAP_RFC).
3. Created new logical LDAP Server(CUA).Here we have to maintain the connection
details to the physical directory.
4. We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
5. In transaction LDAPMAP specific SAP data fields, we mapped to the desired
directory attributes.
6. Testing from LDAP transaction working fine. We are able to see the attributes and
values from Active directory.
Issue:
When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
LDAP Server = CUA (created earlier)
LDAP Connector = LDAP_RFC (RFC connection created created ealier)
In the tab: (Object that exist both in the directory and in the Database:)
Selected: Compare Time Stamp.
In the tab: (Objects the only exist in the Directory.)
Selected : Create in Database.
In the tab(Objects that only Exist in the Database:
Selected: Ignore Object.
Result from the report shows that connection to LDAP server is fine and 0(zero) objects in Directory.
The program does not create any new user in the Solution Manager system.
Any help on this issue greatly appreciated.
Thanks & Regards,
Harish

where did you see this error ? is there anymore details.
i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Thanks, Noddy

Some confusing issues and their solution while working with InCopy stories.

Hi All, Last few months I have been working on InDesign/InCopy workFlow.I faced lot many problems and able to find solutions for some of them.I am putting down some of the problems I haved faced and the approaches I followed to get the solutions. So here I go... First I will put the issues I faced and then their common solution. Issue 1)A text frame exported as a InCopy file. InterfacePtr<IDataLinkReference> dataLinkReference(frameUIDRef, UseDefaultIID()); if(dataLinkReference == nil) break; UID linkUID = dataLinkReference->GetUID(); If(linkUID == kInvlaidID) Break; The linkUID is always equal to kInvalidUID. Issue 2)A graphics frame with image placed inside it and exported as an InCopy file. In this case the linkUID will have a valid UID. So the code ahead is UIDRef linkRef(frameUIDRef.GetDataBase(), linkUID); InterfacePtr<IDataLink> dataLink(linkRef, UseDefaultIID()); if(dataLink != nil) { PMString linkedFilePath = *(dataLink->GetFullName()); } so here the linkedFilePath will be the file path of the linked incopy file and not of that image file. Issue 3)A graphics frame with image placed inside it but without any associated InCopy file. The linkedFilePath is that of filePath of an image. The solution I found was.. The reason for this confusing behaviour is, InCopy frame has one more UIDRef associated with the InCopy story. So to get the incopy related UIDRef we have to use the following code. UIDRef incopyStoryUIDRef = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(itemUIDRef); The problem with above api is in case of the graphic frame the itemUIDRef should be the UIDRef of the frame and in case of text frame the itemUIDRef should be the UIDRef of the text story i.e the text model. To get the proper UIDRef use following code //code start UIDRef storyUIDRef(frameUIDRef.GetDataBase()); InterfacePtr<IPMUnknown> unknown(frameUIDRef,IID_IUNKNOWN); if(unknown == nil) { break; } UID textFrameUID = Utils<IFrameUtils>()->GetTextFrameUID(unknown); if(textFrameUID != kInvalidUID) { isTextFrame = kTrue; UIDRef textFrameUIDRef(frameUIDRef.GetDataBase(),textFrameUID); InterfacePtr<ITextFrame> textFrame(textFrameUIDRef,UseDefaultIID()); if(textFrame == nil) { break; } ITextModel * txtMdl = textFrame->QueryTextModel(); if(txtMdl == nil) { break; } storyUIDRef = GetUIDRef(txtMdl); result = Utils<IInCopyBridgeUtils>()->IsInCopyStory(storyUIDRef); } else { isTextFrame = kFalse; result = Utils<IInCopyWorkFlowUtils>()->IsInCopyStory(frameUIDRef); storyUIDRef = frameUIDRef; } //code end. Then use UIDRef incopyStoryUIDRef = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(storyUIDRef ); Once you have the proper incopyStoryUIDRef, the following code works uniformely and you will always get the incopy file irrespective of the type of frame. IDataLink * dLink = Utils<IInCopyBridgeUtils>()->QueryDataLink(incopyStoryUIDRef); if(dLink == nil) { break; } so dLink->GetFullName() will always give you the incopy file path associated with the frame. Hope this helps somebody working on InCopy stories. But I still could not find the way to find the image file path associated with the graphic incopy story.(refer issue 2 above.).Using above approach I always get the file path of associated incopy file. I will keep this thread updated as and when I encounter with some more issues and find their solutions. Thanks and Regards, Yopangjo.

I cannot explain why your iMac worked ok. I too have seen situations where "lower cost" WiFi routers like Belkin and LInksys have "sort of" worked but had problems.
Back in 2004 after buying a fairly large house I purchased an off-brand WiFi gateway that featured high power output so I could mount it centrally in the house and be able to use WiFi everywhere. Even though this thing was rated well and had the high-power everyone said would help it gave me continuous problems.
One day a buddy gave me an Apple Airport (the one that looks like a apple power adapter). I plugged it in where I had the high power unit in place and suddenly I had amazing WiFi speed and coverage EVERYWHERE. I could not believe it! That day I ordered an Airport Extreme and it has been fantastic.
I then recommended this solution to a friend of mine that had an Apple MacBook and he had nothing but trouble and went back to his linksys. So it is a mixed bag.
Currently I have three WiFi devices: A TimeCapsule downstairs, an Airport Extreme upstairs and a LInkSys in a utility closet. The LinkSys is needed because my son's GF's Windows computer will not connect to anything else.
Anyway glad you figured something out.

TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

I can't import video from my Canon XF 100 into Final Cut Pro X. I'm told they are not compatible. Anyone have similar issues and/or solutions?

I can't import video from my Canon XF 100 into Final Cut Pro X. I'm told they are not compatible. Anyone have similar issues and/or solutions?

Google XfcpX.

Issues with Lenovo Update Retriever and T510i Modell 43149VG

Lenovo System Update and Lenovo Update Retriever fail to install Wlan-Drivers on a T510i Notebook.
Following Adapter is missing in dependency configuration: _PnPID PCI\VEN_8086&DEV_0084&SUBSYS_13158086
I added the card manually. Please fix Following package with this Adapter:
g1w213ww_s32
Thanks
I will expand this Thread with TVSU and TVUR Issues soon

Hi orth04, It sounds like ThinkVantage System Update is not working for you.
One alternative is to manually download and install the drivers.
The other alternative is to make System Update do what you want. Can you give us some more details about what happens?
I don't work for Lenovo. I'm a crazy volunteer!

Vista "Problem Reports and Solutions" - Compatibility issues?

The Visa +Problem Reports and Solutions control panel+ is reporting three problems which I cannot seem to be able to find a resolution to.
( So far I've just installed Vista 32 business ed. on my iMac 20". Installed bootcamp drivers, updated bootcamp to 2.1 and applied Vista updates.)
*The Problem Reports and Solutions control panel reports the following:*
1. Download and install the driver for Apple performance counter
This problem was caused by Apple performance counter, which was created by Apple Inc..
2. Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows. This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and this version of Windows. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc..
3. Problem caused by Apple Desktop Null Driver.
This problem was caused by a compatibility issue between this version of Windows and Apple Desktop Null Driver. This product is usually distributed by the company that manufactured your device or computer. Note. If you bought Apple Desktop Null Driver from a retailer and installed it yourself, you will need to contact its manufacturer.
Are these genuine, and if so, is there a solution? No solutions are proposed by Vista itself.
Mac OS 10.5.5 , bootcamp 2.1
Message was edited by: noutram

A performance counter is not something that is usually in use by any application except by the developers of the unit itself. nothing to be alarmed about (well, except perhaps that it should have been removed).
A null driver is (as the name indicates) null, there is no functionality assigned with it. MS error message is just brilliant "there is an error in your null driver", like what, there is no functionality in a null driver. So no problems there either.
I got the 2 above error messages on the very first generation 17" MBP for ages and so far not seen any impacts in it for my work.
The Intel issue is interesting, it might be a good idea to see if Intel has an updated driver for the problem.

I recently purchased a Seagate Backup Plus Slim portable hardrive. Despite Seagate claiming the product is compatible with OS X 10.5 I cannot get the installer to launch. Has anyone encountered the same issue and found a viable solution?

I recently purchased a Seagate Backup Plus Slim portable hardrive. Despite Seagate claiming the product is compatible with OS X 10.5 I cannot get the installer to launch. Has anyone encountered the same issue and found a viable solution?

A Gigaware 9pin to 4pin fw cable solved my issue. The Rocketfish fw cable was crap. And that thing cost me $24.99 from Best Buy. Getting my money back for sure.

Lenovo K3 Note Wifi Issue permanent solution.

Hey guys,
I just find a permanent solution for the wifi problem happened after 296MB OTA update to lenovo K3 Note.
To solve it. Just follow these steps:-
Go to engineering mode my dialing:- *#*#3646633#*#*
Now go to connectivity tab and tap on WiFi.
Now mark the option.
1.) WFA test UI
2.) WPS test mode
Now exit from engineering mode and check. Wifi will work smoothly.!

How did you contact the support? I would also like to contact them.
Why would no one from Lenovo chip in and provide the reason for only some phones heating up. Few that I know own this phone does not have any problem. I just got the phone and it heated up right away after flashing ROW rom. How can I reach Lenovo support??

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy

Compilation of Lenovo X120e issues and solutions

Similar Messages

Maybe you are looking for