Compilations don't work
In a compilation, I have a song placed as track number 4 out of 10 tracks; however it shows up on my iPod as the first song. I typed in everything correctly for the compilation. Could it be that 9 of the songs I got from another source, and the song that shows up as the first but is supposed to be fourth I got from iTunes, is causing the problem?
WikedJuggalo?? haha, sick name. ok, so u didn't understand my question. I don't think compilation means corrupted either. Anyways, my songs play completely fine, they're just in the wrong order. And when i try to put them in the right order, one of the songs is still out of place.
Similar Messages
-
Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, don´t work with UCCX 10.5
I have a Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, after upgrade it don´t work with UCCX 10.5
I get the error message: "Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL.; nested exception is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. (line: 1, col: 47)
Does anyone know about this ?Did you ever find a resolution to this issue? I have a similar issue after upgrading from 7 to 10.5. I have loaded all provided certificates to the tomcat-trust store, restarted Tomcat Services and still get the same error
Thanks -
XORG: Keyboard don't work right
Hi,
after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key..... all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
Here my xorg.conf:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
and the corresponding log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 9 17:03:13 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0x00000000a8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section My Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: AUO
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1400, YRes: 1050, DotClock: 108000
HBlank: 240, HOverPlus: 48, HSyncWidth: 112
VBlank: 15, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1400x1050
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit a8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
(II) RADEON(0): Largest offscreen area available: 1408 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0xd10000
(II) RADEON(0): Will use depth buffer at offset 0x1382000
(II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xa8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xb0000000
(II) RADEON(0): [agp] Ring mapped at 0xb37a2000
(II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
(II) RADEON(0): [agp] GART texture map handle = 0xb0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
(II) RADEON(0): [drm] register handle = 0xe0010000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 10
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xabffa800 is: 0xabffa800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
(II) RADEON(0): Largest offscreen area available: 1408 x 6983
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
restore common
restore crtc1
restore pll1
finished PLL1
restore LVDS
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 370 x 277
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.1
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Logitech USB Receiver: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Logitech USB Receiver: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found mouse buttons
(II) Logitech USB Receiver: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) config/hal: Adding input device C-Media USB Headphone Set
(**) C-Media USB Headphone Set: always reports core events
(**) C-Media USB Headphone Set: Device: "/dev/input/event2"
(II) C-Media USB Headphone Set: Found keys
(II) C-Media USB Headphone Set: Configuring as keyboard
(II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) C-Media USB Headphone Set: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) C-Media USB Headphone Set: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) C-Media USB Headphone Set: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
thanks and bye
smaxThanks Bob for that very fast reply!
But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
Thanks and Bye!
smax
Last edited by smaxer (2008-12-09 17:42:43) -
I cannot say much. I've tested it with Mplayer and xine but both don't work. I want to use Mplayer so I'll speak only from mplayer.
When I start Mplayer and go to DVD - Open Disc this error appears -> "Cannot open the IFO file for DVD title1"
I don't know what I should do. I have the following packages installed on my machine mplayer 1.0pre5-5, libdvdcss 1.2.8-1, libdvdread 0.9.4-2 everything from pacman.
I couldn't say more so I hope anybody know something.No my dvd is not mounted when try to run the dvd.
Mplayer is pointing to /dev/dvd as normal and I made the right entries for generating /dev/dvd in /etc/devfsd.conf
I only have /mnt/dvd cause I only have one Multi DVD drive which supports all. I think I should mention that it's a Laptop.
I'll post the entries from devfsd.conf which counts to the possible failure generators.
# CD-Rom Permissions for burningREGISTER
^ide/host0/bus1/target0/lun0/cd PERMISSIONS root.cdrom 666
# Create /dev/dvd
LOOKUP ^dvd$ CFUNCTION GLOBAL mksymlink ${mntpnt}/cdroms/cdrom0 dvd
REGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL mksymlink ${devpath} dvd
UNREGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL unlink dvd
I suppose that it has to do with the packages from pacman. Eventually they are not compiled with the proper options to mplayer or something like that stuff. So if anyone has dvd playback running under the same packages as I, plz reply. -
I am working on a small application.
My main frame is a public class that defines two buttons in its constructor one for input and the other for feedback.
The input screen and the feedback screens are defined as inner listener classes of the main class.
The code compiles fine but the buttons don't work.Please take a look at my code and make suggestions for what I am doing wrong
Thanks
import java.awt.*;
import java.awt.event.*;
public class project1 extends Frame {
static Object source;
static Button input, feedback, apply;
public project1(){
super("Project Development Coordination System");
setSize(500,500);
setLayout(new BorderLayout());
//Build and add 1st Panel of project1
Panel p1 = new Panel(new BorderLayout());
TextField Title = new TextField();
Title.setFont(new Font("Sansserif", Font.BOLD, 48));
Title.setText("HORNSONIC");
Title.setEditable(false);
TextField Name = new TextField();
Name.setFont(new Font("Sansserif", Font.BOLD, 30));
Name.setText("Hera International, Inc.");
Name.setEditable(false);
p1.add(Title, BorderLayout.NORTH);
p1.add(Name, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add 2nd Panel
Panel PDCS = new Panel();
TextField pdcs = new TextField();
pdcs.setFont(new Font("Sanserif", Font.BOLD, 22));
pdcs.setText("Project Development Coordination System");
pdcs.setEditable(false);
PDCS.add(pdcs);
add(PDCS, BorderLayout.CENTER);
//Build and add 3rd Panel
Panel buttons = new Panel();
Button input = new Button("INPUT");
buttons.add(input);
Button feedback = new Button("FEEDBACK");
buttons.add(feedback);
input.addActionListener( new Input());
feedback.addActionListener(new Feedback());
add(buttons, BorderLayout.SOUTH);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
System.exit(0);
//end of project1()
//Input class
static class Input extends Frame implements ActionListener {
Input(){
super("Input");
setSize(500,500);
//Build and add FirstPanel of the Frame
Panel FP = new Panel(new BorderLayout());
//Build and add northpanel of FP
Panel np = new Panel(new BorderLayout());
//Build and add subpanel1 of np
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
//Build and add subpanel2 of np
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
np.add(subpanel1, BorderLayout.NORTH);
np.add(subpanel2, BorderLayout.CENTER);
FP.add(np, BorderLayout.NORTH);
//Build and add centerpanel of FP
Panel cp = new Panel(new BorderLayout());
//Build and add subcenter1 of centerpanel
Panel subcenter1 = new Panel(new BorderLayout());
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
cp.add(subcenter1, BorderLayout.NORTH);
//Build subcenter panel of cp
Panel subcenter = new Panel(new GridLayout(1,3));
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
cp.add(subcenter, BorderLayout.CENTER);
FP.add(cp, BorderLayout.CENTER);
//Build and add southpanel of FP
Panel sp = new Panel();
TextArea comments = new TextArea("Comments:", 3,30);
sp.add(comments);
FP.add(sp, BorderLayout.SOUTH);
add(FP, BorderLayout.NORTH);
//Build and add SouthPanel of Frame
Panel SP = new Panel();
List l1 = new List(8,true);
l1.addItem("Quote Requested:");
l1.addItem("Quote to be completed by:");
l1.addItem("Sample Requested:");
l1.addItem("STd sent to Factory:");
l1.addItem("Factory estimated ETD:");
l1.addItem("Revised ETD#1:");
l1.addItem("Revised ETD#2:");
l1.addItem("Revised ETD#3:");
SP.add(l1);
TextArea dates1 = new TextArea(8,8);
dates1.setBackground(Color.gray);
dates1.setForeground(Color.black);
dates1.setEditable(true);
SP.add(dates1);
List l2 = new List(8, true);
l2.addItem("Days Quote overdue:");
l2.addItem("Date Quote Received:");
l2.addItem("Actual ETD:");
l2.addItem("Sample Arrival Date:");
l2.addItem("Days Sample overdue:");
l2.addItem("Days in Development:");
l2.addItem("Date sent to customer:");
l2.addItem("Actual Days to customer:");
SP.add(l2);
TextArea dates2 = new TextArea(8,8);
dates2.setBackground(Color.gray);
dates2.setForeground(Color.black);
dates2.setEditable(true);
SP.add(dates2);
add(SP, BorderLayout.SOUTH);
//Build and add CenterPanel of Frame
Panel TD = new Panel();
TextField td = new TextField("TIME IN DEVELOPMENT");
TD.add(td);
add(TD, BorderLayout.CENTER);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
System.exit(0);
}// end of input()
public void actionPerformed(ActionEvent Event)
Object source = Event.getSource();
if (source == input){
new Input();
setVisible(true);
}//end of input if
}//end of actionPerformed.
}//end of class input
//Feedback class
static class Feedback extends Frame implements ActionListener{
Feedback(){
super("Feedback");
setSize(500,500);
//Build and add panel 1.
Panel p1 = new Panel(new BorderLayout());;
//Build and subpanel off panel 1
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
p1.add(subpanel1, BorderLayout.NORTH);
p1.add(subpanel2, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add Panel 2
Panel p2 = new Panel(new BorderLayout());
//Build and add subcenter1 of Panel 2.
Panel subcenter1 = new Panel(new BorderLayout());
//Build subpanels of subcenter 1.
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
p2.add(subcenter1, BorderLayout.NORTH);
//BUILD and add subcenter to Panel 2);
Panel subcenter = new Panel();
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
p2.add(subcenter, BorderLayout.CENTER);
//Build and add south subpanel of Panel 2
Panel subpanel = new Panel();
Label L2 = new Label("Sample Disposition:");
subpanel.add(L2);
TextField T2 = new TextField(10);
T2.setEditable(true);
subpanel.add(T2);
Label l2 = new Label("Date:");
subpanel.add(l2);
TextField t2 = new TextField(10);
t2.setEditable(true);
subpanel.add(t2);
TextArea TF = new TextArea("Feedback:",3,30);
TF.setEditable(true);
subpanel.add(TF);
p2.add(subpanel, BorderLayout.SOUTH);
add(p2, BorderLayout.CENTER);
//Build and add Panel 3.
Panel p3 = new Panel();
Label L3 = new Label("Project Continued on Revision#:");
TextField T3 = new TextField(10);
T3.setEditable(true);
Label l3 = new Label("Order Placed:");
TextField t3 = new TextField(10);
t3.setEditable(true);
p3.add(L3);
p3.add(T3);
p3.add(l3);
p3.add(t3);
add(p3, BorderLayout.SOUTH);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
System.exit(0);
}//end of Feedback()
public void actionPerformed(ActionEvent AE){
if (AE.getSource() == feedback){
new Feedback();
setVisible(true);
}//end of feedback if
}//end of actionPerformed
}//end of class Feedback
public static void main (String args[]){
project1 window = new project1();
window.setVisible(true);
//end of main
}//end.I compiled and did run your code....
it seems you are trying to implement a Frame with two buttons... each time the user click on a button, the main frame displays the equivalent panel with a set of components .. isn�t it ?
well... some tips:
1 - Why don�t you use a JTabbedPane ? a much better container than a simple Frame....
2 - If you really need to use a Frame as a container of multiple forms.. then you should take a look in the java.awt.CardLayout
other tip: don�t use the Frame component as the same class as the ActionListener.. divie these comopnents in two classes... -
Hello,
A friend of my is making a flash website for an assessment. But the buttons to navigate between the pages don't work. I have looked at it but I can't figure out the problem. There are no errors at all.
The website consists of the main timeline, with all the pages on it. There is a movieclip with the instance name 'menu' in which all the navigation buttons are. The navigation buttons are called home_btn, info_btn, etc.
The buttons should link to a frame on which there are labels. Those labels have the same name as in the AS code. (We checked it like 100 times!)
Here is the ActionScript (3) that is inside the 'menu' movieclip:
import flash.events.MouseEvent;
home_btn.addEventListener(MouseEvent.CLICK,naarHome);
function naarHome(event:MouseEvent):void{
gotoAndStop("home");
info_btn.addEventListener(MouseEvent.CLICK,naarInfo);
function naarInfo (event:MouseEvent):void{
gotoAndStop("info");
animatie_btn.addEventListener(MouseEvent.CLICK,naarAnimatie);
function naarAnimatie (event:MouseEvent):void{
gotoAndPlay ("animatie");
video_btn.addEventListener(MouseEvent.CLICK,naarVideo);
function naarVideo (event:MouseEvent):void{
gotoAndStop("video");
On the maintimeline there is a stop(); on the first frame of the 'home' page. On this frame is also a movieclip called gallery, which contains a automatic slideshow of some photo's.
When executing this, the navigation menu appears and the slideshow starts, but when clicking on one of the buttons, nothing happens and the slideshow keeps going. There are no compiler errors and there is no output.
Does anyone know what the problem is?
Thanks in advance.While there is nothing wrong with that code in terms of syntax, for where you say it is, I would expect errors unless your menu movieclip happens to have frames with those labels in it. If that code is inside the menu and you are trying to command the parent of the menu, then your gotoAndStop('label) commands are targeting the wrong timeline.
What you should try doing is to move that code out to the timeline that it is trying to command and target the button from there, something like...
menu.home_btn.addEventListener(MouseEvent.CLICK,naarHome);
function naarHome(event:MouseEvent):void{
gotoAndStop("home");
menu.info_btn.addEventListener(MouseEvent.CLICK,naarInfo);
function naarInfo (event:MouseEvent):void{
gotoAndStop("info");
menu.animatie_btn.addEventListener(MouseEvent.CLICK,naarAnimatie);
function naarAnimatie (event:MouseEvent):void{
gotoAndPlay ("animatie");
menu.video_btn.addEventListener(MouseEvent.CLICK,naarVideo);
function naarVideo (event:MouseEvent):void{
gotoAndStop("video"); -
i start learning java last week , so any one can help and tell me why this program don't work
import java.util.*;
public class Calendar
public static void main(String[] args)
GregorianCalendar d= new GregorianCalendar();
int today = d.get(Calendar.DAY_OF_MONTH);
int month = d.get(Calendar.MONTH);
d.set(Calendar.DAY_OF_MONTH, 1);
int weekday = d.get(Calendar.DAY_OF_WEEK);
System.out.println("Sun Mon Tue Wed Thu Fri Sat");
for (int i=Calendar.SUNDAY; i<weekday; i++)
System.out.print(" ");
do
int day = d.get(Calendar.DAY_OF_MONTH);
if (day<10) System.out.print(" ");
System.out.print(day);
if (day==today)
System.out.print("* ");
else
System.out.print(" ");
if (weekday==Calendar.SATURDAY) System.out.println();
d.add(Calendar.DAY_OF_MONTH, 1);
weekday = d.get(Calender.DAY_OF_WEEK);
while (d.get(Calendar.MONTH)==month);
}The class name "Calendar" is already used by Java.
Rename your class "MyCalendar" or something else and it almost all works.
Near the end of your code, you misspelled "Calendar" (you typed "Calender").
After making those two changes, your code compiled and ran for me.
Good luck! -
After upgrading to Java 1.4.1_02, the compile would no longer work so I reinstalled Sun ONE Studio. Now I can compile, but the Form Editor tabs for Layouts, Swing, etc don't work. No response except a 2mm line moves around in the directly under the tabs. No selections appear anymore. Help anyone?
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
HAVOK, And all other xtras don't work in the Mac version
Just tested the new Director. Another amazing leap forward,
well not, it's the same spot they've been in since 8.5. And
although they effectively keep releasing the same product, in this
version the xtras, Havok included, don't work in the mac version.
They do on the pc. I wonder if this means that the havok based
games won't work in shockwave 11 on the mac. I make games, with 15
million plus a year playing them. It's annoying.
HAVOK, DIRECTxtras, ASFFT and a few others I've tested. Any
other comments?
Also speed wise, 3d is much better but everything else plays
at same speed.If you are not on a PPC Mac, then none of the PPC xtras will
work until
the developer compiles them as Universal binaries. In the
case of
Havok, that is unlikely to happen, which is why they have the
new Aegia
engine instead. For other 3rd party xtras, talk to the
manufacturer and
see if they have a UB version available. Many of them were in
on the
beta, so they may have new versions up now. -
Vector Methods Don't Work After Deserialization
I was able to add JavaBeans that encapsulate information about films to a Vector, then serialize the Vector. I then deserialized the Vector and extracted the the details of each film. However when I go to use methods of the Vector class on the deserialized Vector, they don't work. I would like to be able to remove any film title in the Vector.
try {
FileInputStream file = new FileInputStream("FilmVector.ser");
ObjectInputStream obInputStream = new ObjectInputStream(file);
container = (Vector)obInputStream.readObject();
NUM_FILMS = container.size();
Iterator it = container.iterator();
while(it.hasNext()) {
FilmBean film = (FilmBean)it.next();
String name = (String)film.getName();
String genre = (String)film.getGenre();
int year = (int)film.getYear();
String year2 = String.valueOf(year);
int length = (int)film.getLength();
String length2 = String.valueOf(length);
double audio = (double)film.getAudio();
String audio2 = String.valueOf(audio);
String actorname = film.getActorName();
nameLabel.setText("Titre du film: " + name);
genreLabel.setText("Cat�gorie: " + genre);
actorLabel.setText("Acteur: " + actorname);
yearLabel.setText("Ann�e: " + year2);
lengthLabel.setText("Dur�e: " + length +" Minutes");
audioLabel.setText("Audio: " + audio2);
System.out.println(name + " | " + genre + ", " + actorname + ", Ann�e: " + year2 + ", Dur�e: " + length2 + " Minutes," + " " + "Audio: " + audio2);
System.out.println("Nombre de films: " + NUM_FILMS);
} catch (Exception ioex) { }
init:
deps-jar:
compile-single:
run-single:
Monde Infernal | Horreur, Beckinsale, Kate, Ann�e: 2003, Dur�e: 121 Minutes, Audio: 5.1
Vol du Phoenix | Aventure, Quaid, Dennis, Ann�e: 2004, Dur�e: 105 Minutes, Audio: 2.0
Apocalypse Now | Drame, Brando, Marlon, Ann�e: 1979, Dur�e: 147 Minutes, Audio: 2.0
Truman Show, The | Com�die, Jim Carrey, Ann�e: 1999, Dur�e: 103 Minutes, Audio: 2.0
Assault On Precinct 13 | Action, Fishburne, Lawrence, Ann�e: 2005, Dur�e: 109 Minutes, Audio: 5.1
Alexandre | Drame, Hopkins, Anthony, Ann�e: 2004, Dur�e: 82 Minutes, Audio: 5.1
Punisher, The | Action, Travolta, John, Ann�e: 2004, Dur�e: 123 Minutes, Audio: 2.0
Predator 2 | Science Fiction, Hall, Kevin Peter, Ann�e: 1990, Dur�e: 108 Minutes, Audio: 2.0
G�n�ration Chucky | Horreur, Tilly, Jennifer, Ann�e: 2004, Dur�e: 87 Minutes, Audio: 5.1
Control | Science Fiction, Liotta, Ray, Ann�e: 2004, Dur�e: 99 Minutes, Audio: 5.1
I Know What You Did Last Summer | Horreur, Hewitt, Jennifer Love, Ann�e: 1997, Dur�e: 101 Minutes, Audio: 2.0
Garfield, The Movie | Com�die, Hewitt, Jennifer Love, Ann�e: 2004, Dur�e: 80 Minutes, Audio: 2.0
Blade 2 | Action, Snipes, Wesley, Ann�e: 2002, Dur�e: 117 Minutes, Audio: 2.0
Blade 1 | Action, Snipes, Wesley, Ann�e: 1998, Dur�e: 120 Minutes, Audio: 2.0
Village, Le | Drame, Walker, Ivy, Ann�e: 2004, Dur�e: 108 Minutes, Audio: 5.1
XXX - L'�tat de L'union | Action, Ice Cube, Ann�e: 2005, Dur�e: 101 Minutes, Audio: 2.0
XXX | Action, Diesel, Vin, Ann�e: 2002, Dur�e: 124 Minutes, Audio: 5.1
Frankenstein, Mary Shelley's | Horreur, De Niro, Robert, Ann�e: 1994, Dur�e: 123 Minutes, Audio: 2.0
Blues Brothers, The | Com�die, Belushi, John, Ann�e: 1980, Dur�e: 133 Minutes, Audio: 2.0
Austin Powers: TheSpy Who Shagged Me | Com�die, Myers, Mike, Ann�e: 1999, Dur�e: 95 Minutes, Audio: 2.0
Tomorrow Never Dies | Action, Brosnan, Pierce, Ann�e: 1997, Dur�e: 119 Minutes, Audio: 2.0
Vaisseau Fant�me, Le | Horreur, Byrne, Gabriel, Ann�e: 2002, Dur�e: 90 Minutes, Audio: 5.1
Tequila Sunrise | Action, Gibson, Mel, Ann�e: 1988, Dur�e: 115 Minutes, Audio: 2.0
Terminator 3 | Action, Schwarzenegger, Arnold, Ann�e: 2003, Dur�e: 109 Minutes, Audio: 5.1
Titanic | Drame, Di Caprio, Leonardo, Ann�e: 1997, Dur�e: 185 Minutes, Audio: 2.0
Star Wars 2: Attack of The Clones | Science Fiction, McGregor, Ewan, Ann�e: 2002, Dur�e: 142 Minutes, Audio: 2.0
Star Wars 4: A New Hope | Science Fiction, Hamill, Mark, Ann�e: 2004, Dur�e: 124 Minutes, Audio: 2.0
Star Wars 5: The Empire Strikes Back | Science Fiction, Hamill, Mark, Ann�e: 1980, Dur�e: 127 Minutes, Audio: 2.0
Star Wars 6: Return of The Jedi | Science Fiction, Hamill, Mark, Ann�e: 1983, Dur�e: 135 Minutes, Audio: 2.0
S.W.A.T. | Action, Jackson, Samuel L., Ann�e: 2003, Dur�e: 117 Minutes, Audio: 5.1
Street Fighter | Action, Van Damme, Jean-Claude, Ann�e: 1994, Dur�e: 101 Minutes, Audio: 2.0
Sudden Death | Action, Van Damme, Jean-Claude, Ann�e: 1995, Dur�e: 110 Minutes, Audio: 2.0
Sum of All Fears, The | Action, Afflek, Ben, Ann�e: 2002, Dur�e: 123 Minutes, Audio: 2.0
Sur Le Seuil | Drame, Huard, Patrick, Ann�e: 2003, Dur�e: 99 Minutes, Audio: 5.1
Kill Bill 1 | Action, Thurman, Uma, Ann�e: 2003, Dur�e: 110 Minutes, Audio: 5.1
Private Parts | Com�die, Stern, Howard, Ann�e: 1997, Dur�e: 109 Minutes, Audio: 2.0
Voix des Vents, La | Guerre, Cage, Nicholas, Ann�e: 2002, Dur�e: 134 Minutes, Audio: 2.0
Voie de Perdition, La | Drame, Hanks, Tom, Ann�e: 2002, Dur�e: 117 Minutes, Audio: 5.1
Valentine | Horreur, Boreanez, David, Ann�e: 2001, Dur�e: 96 Minutes, Audio: 5.1
Clockwork Orange | Drame, McDowell, Malcom, Ann�e: 0, Dur�e: 136 Minutes, Audio: 5.1
Clockwork Orange | Drame, McDowell, Malcom, Ann�e: 0, Dur�e: 136 Minutes, Audio: 5.1
Clockwork Orange | Drame, McDowell, Malcom, Ann�e: 0, Dur�e: 136 Minutes, Audio: 5.1
Clockwork Orange | Drame, McDowell, Malcom, Ann�e: 1971, Dur�e: 136 Minutes, Audio: 5.1
Clockwork Orange | Drame, McDowell, Malcom, Ann�e: 1971, Dur�e: 136 Minutes, Audio: 5.1
Nombre de films: 44
BUILD SUCCESSFUL (total time: 3 seconds)Strike notice
A number of the regular posters here are striking in protest at the poor
management of these fora. Although it is our unpaid efforts which make the
fora function, the Sun employees responsible for them seem to regard us as
contemptible. We hope that this strike will enable them to see the value
which we provide to Sun. Apologies to unsuspecting innocents caught up in
the cross-fire. -
Fusion Middleware control and targets don't work
Hello,
I got problems with the Fusion Middleware control and targets that don't work after upgrading from AS 10.1.2.3 to 11g.
I have WLS 11g running. The WL Admin consoles are working (http://<hostname>:7001/console and http://<hostname>:7002/console)
1. Fusion Middleware control on Infra (http://<hostname>:7001/em) does not return anything - just show <loading> on the screen.
2. Fusion Middleware control on Mid Tier (http://<hostname>:7002/em) returns a 404 error and I found a solution on this forum to do the Extend Domain and turn on/configure Enterprise Manage. I tried and got error "INST-07303 - Specified Domain cannot be used for Extend Domain configuration".
3. There sre no Targets in both Infra and Mid Tier targets.xml files after ugrading from AS 10.1.2.3 to 11g. How do I transfer all targets from the old AS 10.1.2.3 Infra and Mid Tier targets.xml to Fusion 11g Infra and Mid Tier targets.xml.
OS is Linux SUSE SLES-10 SP3
Any help?.
Thanks,create the sh file and comping for forms but this file in a where the forms available
export ORACLE_HOME=/home/oracle/Oracle/Middleware/as_1
for i in `ls *.pll`
do
echo Compiling Form $i ....
/home/oracle/Oracle/Middleware/asinst_1/bin/frmcmp.sh userid=aaa/aaa@gggg batch=yes module=$i module_type=LIBRARY compile_all=yes window_state=minimize
done
with regards
Abdulwajid khan
[email protected] -
HelloWorld don't work in eclipse-cdt ... !!
Hi all,
can anybody tell me, what i'm doing wrong here?
i have installed eclipse-cdt with pacman and in my second try i downloaded it from eclipse.org.
I always get the same problems ..
I created a new Hello World c++ project, but i couldn't compile it successfully.
**** Build of configuration Debug for project test2 ****
make all
Building file: ../src/test2.cpp
Invoking: GCC C++ Compiler
g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"src/test2.d" -MT"src/test2.d" -o"src/test2.o" "../src/test2.cpp"
../src/test2.cpp:9:20: warning: iostream: No such file or directory
../src/test2.cpp: In function 'int main()':
../src/test2.cpp:13: error: 'cout' was not declared in this scope
../src/test2.cpp:13: error: 'endl' was not declared in this scope
make: *** [src/test2.o] Error 1
Looks like the compiler don't find the includes and librarys. By default the include search paths for the compiler are
/usr/inlude
/usr/local/include
Then I added to the include path
/usr/include/c++/4.3.3
and to the librarys paths
/usr/lib
/usr/local/lib
then i got this result
**** Build of configuration Debug for project test ****
make all
Building file: ../src/test.cpp
Invoking: GCC C++ Compiler
g++ -I/usr/include -I/usr/include/c++/4.3.3 -I/usr/local/include -O0 -g3 -Wall -MMD -MP -MF"src/test.d" -MT"src/test.d" -o"src/test.o" "../src/test.cpp"
In file included from /usr/include/c++/4.3.3/iosfwd:46,
from /usr/include/c++/4.3.3/ios:44,
from /usr/include/c++/4.3.3/ostream:45,
from /usr/include/c++/4.3.3/iostream:45,
from ../src/test.cpp:9:
/usr/include/c++/4.3.3/bits/stringfwd.h:46: error: expected constructor, destructor, or type conversion before '(' token
/usr/include/c++/4.3.3/bits/stringfwd.h:55: error: expected type-specifier before 'allocator'
/usr/include/c++/4.3.3/bits/stringfwd.h:55: error: expected '>' before 'allocator'
/usr/include/c++/4.3.3/bits/stringfwd.h:60: error: template argument 3 is invalid
/usr/include/c++/4.3.3/bits/stringfwd.h:60: error: invalid type in declaration before ';' token
/usr/include/c++/4.3.3/bits/stringfwd.h:68: error: '_GLIBCXX_END_NAMESPACE' does not name a type
In file included from /usr/include/c++/4.3.3/cwchar:49,
from /usr/include/c++/4.3.3/bits/postypes.h:47,
from /usr/include/c++/4.3.3/iosfwd:47,
from /usr/include/c++/4.3.3/ios:44,
from /usr/include/c++/4.3.3/ostream:45,
from /usr/include/c++/4.3.3/iostream:45,
from ../src/test.cpp:9:
/usr/include/c++/4.3.3/cstddef:57: error: '::size_t' has not been declared
In file included from /usr/include/c++/4.3.3/bits/postypes.h:47,
from /usr/include/c++/4.3.3/iosfwd:47,
from /usr/include/c++/4.3.3/ios:44,
from /usr/include/c++/4.3.3/ostream:45,
from /usr/include/c++/4.3.3/iostream:45,
from ../src/test.cpp:9:
/usr/include/c++/4.3.3/cwchar:61: error: expected constructor, destructor, or type conversion before 'extern'
In file included from /usr/include/c++/4.3.3/ios:45,
from /usr/include/c++/4.3.3/ostream:45,
from /usr/include/c++/4.3.3/iostream:45,
from ../src/test.cpp:9:
/usr/include/c++/4.3.3/exception:40: error: expected declaration before end of line
make: *** [src/test.o] Error 1
by the way, if i take a other short c++ project and do the "make all" on console ... it works ..
any help?
ThanksI have the same problem here. This week I tried to install eclipse from pacman, and I also tried downloading the cdt version from eclipse.org, to my girlfriend's computer and I have the same problem you have. When I compile within eclipse, g++ can't find standard libraries. Invoking g++ from the shell, works as it should.
The strange thing is that in my main computer eclipse is able to compile perfectly. -
Mobile calls to United Kingdom don't work with Unl...
Hi there,
I bought Unlimited Europe subscription because it mentioned that calls to landline & mobile numbers in UK are included in it. But, it only works with landline not mobile calls to UK. Why is that so?Helmut Swaczinna (guest) wrote:
: When I compile and run the OCI demo progs which uses the Oracle
7
: OCI calls under Oracle 8.1.5, the progs crash with segmentation
: fault. With Oracle 8.0.5 they work fine. When I compile the
: demo progs under 8.0.5 und run them under 8.1.5 they crash too.
: Any hints? I have to port an application which uses OCI 7 calls
: to Oracle 8.1.5, because Oracle 8.0.5 don't work under
glibc2.1.
See my patch for 8i at http://www.suse.de/~mha/oracle/
We patched the assembler code in libclient.a, which is wrong.
After recreating libclntsh.so everything works fine.
I think I posted the patch script here some time ago...
MH, currently at Oracle, in Redwood City, CA
null -
OCI 7 calls don't work with 8i
When I compile and run the OCI demo progs which uses the Oracle 7
OCI calls under Oracle 8.1.5, the progs crash with segmentation
fault. With Oracle 8.0.5 they work fine. When I compile the
demo progs under 8.0.5 und run them under 8.1.5 they crash too.
Any hints? I have to port an application which uses OCI 7 calls
to Oracle 8.1.5, because Oracle 8.0.5 don't work under glibc2.1.
Helmut
nullHelmut Swaczinna (guest) wrote:
: When I compile and run the OCI demo progs which uses the Oracle
7
: OCI calls under Oracle 8.1.5, the progs crash with segmentation
: fault. With Oracle 8.0.5 they work fine. When I compile the
: demo progs under 8.0.5 und run them under 8.1.5 they crash too.
: Any hints? I have to port an application which uses OCI 7 calls
: to Oracle 8.1.5, because Oracle 8.0.5 don't work under
glibc2.1.
See my patch for 8i at http://www.suse.de/~mha/oracle/
We patched the assembler code in libclient.a, which is wrong.
After recreating libclntsh.so everything works fine.
I think I posted the patch script here some time ago...
MH, currently at Oracle, in Redwood City, CA
null -
Hi, my friend has a big problem. He has Ati 4570 and uses Catalyst drivers. Command glxgears don't work and fglrx module not found. Catalyst can't install fglrx.
fglrx-install.log:
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.GCC* .??* *.symvers
make -C /lib/modules/2.6.36-ARCH/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/linux-2.6.36-ARCH'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:410:5: error: unknown field 'ioctl' specified in initializer
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:410:5: warning: initialization from incompatible pointer type
make[2]: *** [/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o] Error 1
make[1]: *** [_module_/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.36-ARCH'
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
Last edited by STANKAR (2011-02-17 09:11:44)foutrelis wrote:Install Catalyst from either the AUR or the unofficial [catalyst] repo.
His catalyst is from aur and we tried install catalyst from "catalyst repo", but no new packages.
If we install dkms, dkms added fglrx, but cannot build it "Failed to build fglrx-8.801 with DKMS"
Maybe you are looking for
-
ITouch no longer recognized after installing iTunes 8 and Leopard
I recently installed the new version of iTunes, which prompted me to download the new version of Quicktime, which then prompted me to install Leopard, which I did. Now I have the new version of iTunes, but my iTouch is no longer coming up as a recogn
-
Problem with "watch folder" and Windows 7
I have just switched to Windows 7 and Elements 9 - so far things are working quite well, but I am having a problem with "Watch folder" It is watching my odf folder "My Pictures" but all my new photos are going into Libraries/Pictures and PSE9 won't
-
Master data extraction from EKKO
Hi Gurus, I need to extract data from EKKO and load it into an Infoobject. What kind of data source I need to create wheter transactional data source or Master data data source. Thanks=points,
-
Adding values to multiple_tables
Hi I am puzzled. I am building a vi such that each set of values are added to each table. However, when I connect to 0 value to row input node of insert array function. In the end the tables are filled with empty rows between filled rows. So If I add
-
I have install Web Reports Server 6i on Solaris 2.8 x_86 platform and i hav configure its above documentation. I can start it under OAS 4.0.7 web listener. Then, if i want to create the test report on the web, i receive an error message: REP-3000: In