Compilations show up as lots of albums

Hope this isn't a faq. Not sure if it was an issue in iTunes 6.X.
I (like many) have a few albums that are compilations. In both of the the "cover browser" views, these albums aren't consolodated. So when I flip through the album covers, I see dozens of extra entries for all the individual songs in each compilation. It's bumming me out.
I've experimented with the "compilation" flag and associated preference value. I've experimented with changing the ID3 tags so that Album and Artist match across all songs in the compilation (with artist/title in the "title" field, and nothing is working.
Any suggestions?
PC Windows XP Pro
Many   Other OS   Mac/Win

make sure "artist album", a new field, is the same in all the compilation tracks
then in any view, click on the album colum header, and it will switch to several different options.... switch and sort by "artist album".
personally this is what works for me. below is also how i have each compilation tagged:
- track name
- actual artist
- artist album, album, and grouping all same
- part of compilation checked

Similar Messages

  • Picture won't show up in my Photo Album; big white blank rectangle space

    There is a picture of Sammy Lee, the Olympic Gold Medalist diver, that refuses to show up in one of my Photo Albums on Safari.
    I have done everything that everyone has taught me. I have cleared the cache many times. I have clicked onto a site ourside my own site (actually Allyson's site about the tips for iWeb). I have published all to .Mac. The photo still shows up as a white rectangular space.
    It is not like other times when a photo doesn't show up, because in those cases, there is a question mark in a blue box. With this case, there is no question mark inside a blue box. There is only a white space where the picture would be/was.
    I even went back to iPhoto and put in another copy of that picture, all to no avail.
    QUESTION:
    What else can I do to make the picture show up on my Photo Album page?
    — Lorna in Southern California

    I think it could be the comma causing the problem, actually. Here is a line from the slideshow.html file
    new SlideImage('http://web.mac.com/lorna6/iWeb/Lorna%20x%203/395844EC-4CEE-4545-8AD 3-7E66F83391ECfiles/W%3ASammy%20Lee,%20swimmer2.jpg', 321, 450, 'With Sammy Lee, Olympic champion diver & Gold Medalist. He went on to coach Greg Louganis. At L.A.U.S.D., Office of Bilingual Instruction (It no longer goes by that name.) Mid-80’s'),
    The colon has transferred ok, but there are a lot of commas used in the code to call up the photos in the slideshow and the comma in the file name (and, possibly, the caption) could be causing some problems.
    I don't know enough about this to know for sure (need to consult a higher source...), but it sure couldn't hurt removing it to see if it helps.

  • How do I sort so that all the songs for a particular album show up under only one album? Example:  Eminem 'Encore'  has multiple artists on the entire track list.

    Example:  Eminem 'Encore'  has multiple artists on the entire track list.  Several songs will just list Eminem as the artist, but a lot will have Eminem, FEATURING...so and so.  Each song that has "FEATURING" shows up as a different album, so if you are not paying attention, and pull all the songs from a particular album over to your ipod, for example, and you don't see that not all the songs are there, you won't get them all to transfer.
    Is there anyway to correct this?

    Each tune gets a file name - that is how iTunes works. iTunes is a data base manager.
    In a PlayList a reference is created that will link to a specific tune.
    You can take the tunes that you do not want listed under a particular album name and change the album name using 'Get Info' for that tune(s) from the iTunes window.
    MJ

  • HT1473 Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

    Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

    Generally adding a common album artist will fix things.
    tt2

  • I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

    I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.  Is there any way to recover the data?  Thanks for any help.

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

  • I have album covers showing up on the wrong album in iTunes.   iTumes will not let me delete them.  I have a new laptop with Windows 8.

    I have album covers showing up on the wrong album.  iTunes will not allow me to delete them.  It acts as though it did, but does not, with no error message.

    Hi,
    No available software and drivers for Windows 8.1:
       http://support.hp.com/us-en/product/HP-Photosmart-C5500-All-in-One-Printer-series/3575176/model/3575...
    Please try Software and drivers for Windows 8 for the series:
        http://ftp.hp.com/pub/softlib/software12/COL30128/mp-109095-2/PS_AIO_04_C5500_NonNet_Full_Win_WW_140...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Art shows in itunes cover flow & album view but not on ipod

    I spent several hours downloading cover art to itunes for albums where the art couldn't be automatically retrieved by itunes. I'd browse through album view, and for every album that had no art, I'd (a) select the album by clicking on the default music-note image and thus activate the drag-and-drop target in the lower left, and (b) drag some art from a website. When I was done with this, all the albums for which I downloaded art would properly show art in the itunes cover flow and in album view mode.
    For the iPod (a 160GB Classic), I deselected "display album art on your ipod", hit "apply" to have it delete the art, then reselected and applied again, and itunes went through the process of formating and downloading the art to the ipod.
    Now, however, the iPod still only shows the artwork that had been automatically retrieved; all the art I had added manually won't show. Back in itunes, I notice that it looks like my process for downloading the art only resulted in the art being applied to one song per album, as far as I can tell randomly selected. If, in album view, I select each song individually, the art will show in the lower left corner (and in "get info") only for one of the songs; on one album it might be track 1 while on another it might be track 7. However this is enough for itunes to show the art for the whole album, and also to show the art in cover flow.
    Is there any automatic way to synchronize the art over a whole album, or at least to get it to download to the ipod so that it shows in cover flow and album view on the device as well as on the computer? I had to download art for about 190 albums; it would be a real drag to have to do that again.

    Ok, here is the method I used. Another member gave this to me. It has worked for my iTunes library, and hopefully my ipod on the next sync.
    I opened iTunes and Safari, with Safari on Amazon.com (to get the art). I would play any song from an album and command-click the each song in the album. Once each song is highlighted, I hit command-I to change info. I then dragged the art from Safari to the small box on the right of the smaller info change screen. This resulted in every song highlighted displaying the same artwork.
    I hope this helps.

  • Itunes will not sync photos to my New iPad, I run all current software. Itunes show 0 photos in all albums and events. Why is this and how do I get iTunes to recognise my photo library?

    itunes will not sync photos to my New iPad, I run all current software. Itunes show 0 photos in all albums and events. Why is this and how do I get iTunes to recognise my photo library?

    Select you device from the left sidebar of iTunes and navigate to the Photos tab at the top. Do you have the Sync Photos With checkbox checked and set to iPhoto?

  • HT1145 I can't see my files on my USB shared drive.  It shows there is lots of space taken up, but I can't access the files via my Mac.

    I can't see my files on my USB shared drive.  It shows there is lots of space taken up, but I can't access the files via my Mac.  How do I see them?  I also can't see them on my iPad using FileBrowser.

    You don't have access to it to configure it via Time Machine? You lost me on that one, Time Machine is used for Backup.
    Here is a basic article on the first setup and what you should see:
    http://support.apple.com/kb/HT1178
    To configure Time Capsule you should be using "Airport Utility" 5.3 or higher that is located in the Utilities folder. You can tell if its version 5.3 because the icon will have blue lines instead of orange lines like the older versions. Since you are running Leopard 10.5.6 and you ran Software Update you are probably already running the latest 5.3 version.
    The light flashing amber means you haven't entered enough information so that it can get to the internet. Once you have that info entered the light will turn green.
    If your absolutely sure your CAT5 cables are good you can try a hard reset. I think you have to push the reset button on the back and hold it for 5 seconds or so until the amber light blinks rapidly, then when you release the button it does the reset then.
    http://support.apple.com/kb/HT1300?locale=en_US
    Hope this helps! If not I would probably call AppleCare support or see if you can exchange it.
    -Dan

  • I just synced by ipod touch and lost a lot of album artwork. It is still in itunes but not y ipod touch.

    I just synced my ipod touch and lost a lot of album artwork. It is still in itunes. How can I get all the artowk back to my itouch?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I'm using Pages on OS X 10.7.5 and the colored ball shows up a lot stalling the program.  Is it supposed to be that slow?

    'm using Pages on OS X 10.7.5 and the colored ball shows up a lot stalling the program.  Is it supposed to be that slow?

    Applications / Utilities / Activity Monitor
    Check what exactly is happening when it goes slow. Do you hear hard drive activity for example?
    You may have a 3rd party haxie or background application causing the problem.
    Peter

  • Compilation (17 artists) shows up 17x on iPhone/ Album view. How do i get it to only once?

    Hello,
    I have transferred (drag+drop) a compilation with 17 artists from an USB stick straight to the Iphone without the putting it into the library. All tags have been taken over fine in Itunes. however when i look into the album view in the iPhone music app, the album shows up 17x.
    I have tried to play around with the settings but it doesnt seem to work. This is quite frustrating as i have a lot of compilations that i would like to put on my iphone.
    Please let me know what i have to change in the "get info" options in order for this to resolve. Do i have to change anything in the settings on the Iphone itself?
    Thanks

    ugh. i got it. apparently the iphone doesnt recognise changes to file info if the track is already on the iphone. You have to edit in the itunes library and then transfer....
    hppe this helps

  • Can 'track list' button show your playlist rather than album track list?

    Hi all
    My 3GS iPhone has my music on it in the form of whole albums which live in individual playlists on my Mac, but I also have playlist 'mixes' which I've created from various songs from multiple albums.
    When selecting to play a 'mixed' playlist on my iPhone I tap on it, tap the first song to start the music playing, but then if I tap the top right 'track list' button, instead of showing all the tracks in my created playlist it just shows the entire album tracks from where this particular song has come from. Visually I prefer the 'track list' screen but it seems I can't use it if I'm playing a 'mixed' playlist. Is there any way around this?
    Also, this is the same if I have a double CD album: once I hit the 'track list' button it shows just CD 1 (or 2 if I'm further down the play list of course), rather than all the tracks even though on they all live in one single playlist on my iTunes. I've even taken the starts of the track names off (some of them start with '1_01 Song Title' for example) when importing them into iTunes to see if that helps but it doesn't: the iPhone KNOWS how that track was originally supplied!
    Any help or clarification on this would be very helpful!
    Markos

    sadly, that kind of customization is only easily doable on a computer. the iPhone and it's core apps can not be changed by users. you can request the feature be put in, but unless there are a LOT of requests, you shouldn't get your hopes up as there are a lot of these kinds of requests, and by implementing it, how many other users would be angry and demand it be changed back? http://www.apple.com/feedback/
    if you are playing a song that you selected in a playlist, you should be able to hit the 'back' button in the top left to go back to the playlist and view your songs in the playlist.
    in regards to the 'cd 1 of 2' thing, you will need to change your song info to get this to show in the format you want. to see the song info, select a song and go to 'file -> get info'. that will show you all of the ID3 tag information, which you can edit to do whatever you want.

  • Since an update about a month ago, iTunes no longer shows which songs on an album I've previously purchased. Anyone know why?

    Somce an update about a month ago, iTunes no longer shows which songs on a particular album I've previously purchased. Does anyone know why? For example, I purchase a number os songs fro Glee individually. When a new compilation album comes out, iTunes used to indicate which ones I've already purchased. Now it doesn't.

    you could use this script:
    Track Down Purchases 
    This script will examine each track in a selection of tracks or a selected playlist to determine if it was purchased from the iTunes Store and then copies it to a discrete playlist named for the person who purchased it, eg: "Steve Ballmer's Purchased Music". Recognizes song, video, and audiobook purchases. Purchaser information is gleaned by examining the track's file, which, depending on file location and access speed, can take as long a second per track.

  • How to show artists on a track, album view - itunes 11

    just got itunes 11 and i have my library in album view, when i click on an album a list of songs drops down and underneath each track the artists on the track are displayed; but not for every album. i cant seem to find why but sometimes the artists just arn't shown, how do i make it show?

    alice286 wrote:
    Thank you so much! Got it sorted!
    Another quick qu - what do I do if I have a compilation with each song having a different artist? Can I show the individual artist whilst keeping them all in the same album?
    Only in the Album view. Artist view will display them separately unless you have Group by Album Artist turned On. I tend to set the Album Artist (not the individual track artist) as "Various" or XYZ Soundtrack or something similar making grouping them a bit easier.

Maybe you are looking for

  • How to setup a wifi mesh network in a 6 story full brick home

    Hi, We have to create a solid wifi mesh network in a 6 story multi mil $ home. The home will have complete home automation and requires wifi crestron touch sceens to utilise the network and also all the IT hardware. There will be the ability to run c

  • Online Archive Warning Alerts not being sent to Users

    We have exchange 2010 SP3 Rollup 7 and we utilized Online Archive of Mailbox. Each user has 2 GB of Archive Quota and 1.5 GB of Archive Warning Quota. Users don't receive any warning alert if they exceeds Archive Warning Quota. I suspect this is defa

  • How do I import a module for script use?

    I have a script that uses the AD module for some operations. Here is the code: #04/24/2014 #UsAer Logger #Author: Alexander Bazzi #Property of AerSale, Inc Import-Module ActiveDirectory $username=$env:username $computerName=$env:computername $userPro

  • How to check who has approved the PO or PR?

    Hi, Can someone tell, how to check who has approved the PO or PR? Regards.

  • Opening 2 projects causes end of FCP session.

    I would like to use my 6 TB archive project to import files into another project via browser in FCP into timeline. Working on a new project, deciding to open the archive project causes messages as: *out of memory* and *handler error*, that´s the end