Compile Time Error in "stdio.h" File.
Installed SunStudio 12.1 in LinuxMint 8 and tried to run the "Welcome" Sample C++ Application, but the IDE reported compilation errors. The Error from the OUTPUT windows is thus:
Running "/home/ufonduo/DeveloperCenter/SunStudio-12.1/sunstudio12.1/bin/dmake -f Makefile CONF=Debug" in /home/ufonduo/SunStudioProjects/Samples/Welcome
dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
ufondu --> 1 job
ufondu --> 2 jobs
/home/ufonduo/DeveloperCenter/SunStudio-12.1/sunstudio12.1/bin/dmake -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf
/home/ufonduo/DeveloperCenter/SunStudio-12.1/sunstudio12.1/bin/dmake -f nbproject/Makefile-Debug.mk dist/Debug/SunStudio-Linux-x86/welcome
ufondu --> 1 job
mkdir -p build/Debug/SunStudio-Linux-x86
CC -c -g -o build/Debug/SunStudio-Linux-x86/welcome.o welcome.cc
ufondu --> Job output
mkdir -p build/Debug/SunStudio-Linux-x86
CC -c -g -o build/Debug/SunStudio-Linux-x86/welcome.o welcome.cc
"/usr/include/stdio.h", line 480: Error: "(" expected instead of "__attribute__".
"/usr/include/stdio.h", line 480: Error: "(" expected instead of "__attribute__".
"/usr/include/stdio.h", line 480: Error: ")" expected instead of "__attribute__".
"/usr/include/stdio.h", line 480: Error: ")" expected instead of "__attribute__".
"/usr/include/stdio.h", line 483: Error: "(" expected instead of "__attribute__".
"/usr/include/stdio.h", line 483: Error: "(" expected instead of "__attribute__".
"/usr/include/stdio.h", line 483: Error: ")" expected instead of "__attribute__".
"/usr/include/stdio.h", line 483: Error: ")" expected instead of "__attribute__".
"/usr/include/stdio.h", line 488: Error: "(" expected instead of "__attribute__".
"/usr/include/stdio.h", line 488: Error: "(" expected instead of "__attribute__".
"/usr/include/stdio.h", line 488: Error: ")" expected instead of "__attribute__".
"/usr/include/stdio.h", line 488: Error: ")" expected instead of "__attribute__".
12 Error(s) detected.
*** Error code 12
dmake: Fatal error: Command failed for target `build/Debug/SunStudio-Linux-x86/welcome.o'
Current working directory /home/ufonduo/SunStudioProjects/Samples/Welcome
*** Error code 1
dmake: Fatal error: Command failed for target `.build-conf'
Current working directory /home/ufonduo/SunStudioProjects/Samples/Welcome
*** Error code 1
dmake: Fatal error: Command failed for target `.build-impl'
Build failed. Exit value 1.
Can someone help me get the SunStudio up and running?
Tested the C and Fortran Sample Apps and they compiled and ran perfectly.
I appreciate your imput.
Edited by: user9952972 on Oct 30, 2010 8:58 AM
Edited by: user9952972 on Oct 30, 2010 9:02 AM
The same question is asked and answered in the Studio for Linux forum.
dynamic where-clause
Due to the wide variation in Linux distributions, even variances across "minor" updates, Studio does not always work on unsupported systems like yours. The Release Notes for the version of Studio you have lists the supported systems.
Similar Messages
-
I am a newbie in XML. I am trying to compile the following code. I am getting compile time errors. I have following environment varaibles set. Any help will be really appreciated.
TIA.
set JAVA_HOME=C:\Program Files\jdk1.3.1_03
set JWSDP_HOME=C:\Program Files\jwsdp-1.1
set JAXB_HOME=%JWSDP_HOME%\jaxb-1.0
set JAXB_LIBS=%JAXB_HOME%\lib
set JAXP_LIBS=%JWSDP_HOME%\jaxp-1.2.2\lib
set JWSDP_LIBS=%JWSDP_HOME%\jwsdp-shared\lib
set PATH=%JAVA_HOME%\bin;%JAXB_HOME%\bin;%JWSDP_HOME%\jwsdp-shared\bin;%PATH%
set CLASSPATH=%JAXB_LIBS%\jaxb-api.jar;%JAXB_LIBS%\jaxb-ri.jar;%JAXB_LIBS%\jaxb-xjc.jar;%JAXB_LIBS%\jaxb-libs.jar;%JAXP_LIBS%\jaxb-api.jar;%JAXP_LIBS%\endorsed\xercesImpl.jar;%JAXP_LIBS%\endorsed\xalan.jar;%JAXP_LIBS%\endorsed\sax.jar;%JAXP_LIBS%\endorsed\dom.jar;%JWSDP_LIBS%\jax-qname.jar;%JWSDP_LIBS%namespace.jar;.
C:\Learn XML>javac -verbose CountSax.java
[parsing started CountSax.java]
[parsing completed 63ms]
CountSax.java:3: package org.xml.sax does not exist
import org.xml.sax.* ;
^
CountSax.java:4: package org.xml.sax.helpers does not exist
import org.xml.sax.helpers.* ;
^
CountSax.java:5: package javax.xml.parsers does not exist
import javax.xml.parsers.*;
^
CountSax.java:7: cannot resolve symbol
symbol : class DefaultHandler
location: class CountSax
public class CountSax extends DefaultHandler {
^
[loading C:\jdk1.3.1_02\jre\lib\rt.jar(java/lang/String.class)]
CountSax.java:22: cannot resolve symbol
symbol : class Attributes
location: class CountSax
public void startElement(String name,Attributes atts) {
import java.io.* ;
import org.xml.sax.* ;
import org.xml.sax.helpers.* ;
import javax.xml.parsers.*;
public class CountSax extends DefaultHandler {
public static void main(String args[]) {
SAXParserFactory factory = SAXParserFactory.newInstance() ;
SAXParser saxParser = factory.newSAXParser() ;
saxParser.parse(new File(args[0]),new CountSax()) ;
static private int eltCount = 0 ;
public void startDocument() {
eltCount = 0 ;
public void startElement(String name,Attributes atts) {
eltCount ++ ;
public void endDocument() {
System.out.println("Total number of elements: " + eltCount) ;
}Here is my classpath now
set CLASSPATH=%JAVA_HOME%;%JAXB_LIBS%\jaxb-api.jar;%JAXB_LIBS%\jaxb-ri.jar;%JAXB_LIBS%\jaxb-xjc.jar;%JAXB_LIBS%\jaxb-libs.jar;%JAXP_LIBS%\jaxb-api.jar;%JAXP_LIBS%\endorsed\xercesImpl.jar;%JAXP_LIBS%\endorsed\xalan.jar;%JAXP_LIBS%\endorsed\sax.jar;%JAXP_LIBS%\endorsed\dom.jar;%JWSDP_LIBS%\jax-qname.jar;%JWSDP_LIBS%namespace.jar;.
It still doesn't work. The pakages that it is complaining about comes from sax.jar which is already in classpath. Can anybody please help.
TIA -
Getting compile time errors during gwt application compilation
Hi,
I am getting below compile errors while running ant script for my GWT application.
javac:
[javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes
[javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\client\model\QuestionBean.java:38: type parameters of <X>X cannot be determined; no unique maximal instance exists for type variable X with upper bounds int,java.lang.Object
[javac] return get("questionId");
[javac] ^
I am using JDK 1.6 and ANT 1.7 s/w.
below is the target which is used in the build file:
<javac srcdir="src" includes="**" encoding="utf-8"
destdir="war/WEB-INF/classes"
nowarn="true"
debug="true" debuglevel="lines,vars,source"
includeDestClasses="false"
source="1.5" target="1.5"
>
<classpath refid="project.class.path"/>
<compilerarg value="-Xlint:-unchecked"/>
</javac>
Please suggest me accordingly to overcome this generics compile time errors.
Regards,
Sunder.dannyyates wrote:
There are/have been numerous examples of differences in spec interpretation between Eclipse (ecj) and the Sun compiler. I generally find that Eclipse is more accurate in it's interpretation than Sun! :-)
I would suggest raising this on an appropriate Eclipse forum. The guys there are normally very good at digging into the issue and explaining why they think they are right or else admitting that they've got it wrong.I totally agree on both accounts. I myself have seen at least two compiler bugs and asked both the Sun guys and the Eclipse guys (through their respective bug tracking systems) and both have been resolved (in both cases ecj was actually right, but I wouldn't dare drawing any conclusions from that ;-)). -
Pls suggest a reason for a compile time error
the following program gives a compile time error bcoz of the statement
((State)this).val=this.val. if u could suggest why?
public class Mainc
public static void main(String args[])
State st=new State();
System.out.println(st.getvalue());
State.Memento mem= st.memfunc();
st.altervalue();
System.out.println(st.getvalue());
mem.restore();
System.out.println(st.getvalue());
public static class State
protected int val=11;
int getvalue()
return val;
void altervalue()
val=(val+7)%31;
Memento memfunc()
return new Memento();
class Memento
int val;
Memento()
this.val=state.this.val;
void restore()
((State)this).val=this.val;
}The statement :
((State)this).val
tries to cast Memento into its super class State which is inorrect [former is not latter's subclass]
restore method should be as follows:
void restore()
State.this.val=this.val;
} -
Compile time errors for large code in try-catch blocks
Hi, Has anyone ever faced this problem of a compile time error, where the Java compiler returns with the following error that Code is too large for try block.
I have about 5000 thousand lines in my try-catch block and am facing this problem. Please suggest possible solutions1) Are you sure that your try/catch blocks contain 5 million lines?! I seriously don't believe this.Sounds like generated code. The generator needs to be a bit cleverer. In particular, it seems to be generating repeated blocks of code that ought to be stuffed into methods somewhere.
-
Quick time error 2048 - cant open file
I just downloaded quick time and cant open some files. They are designed for quick time but when I try and open them I get the 2048 error message. I have deleted and re-installed the quck time and am still getting the message.
Any ideas ?Error -2048 implies MPEG-2 file format which QuickTime Player doesn't play without additional software:
http://www.apple.com/quicktime/mpeg2/ -
Run Time Error When opening PDF File on Computer
I am getting a run time error when I try to open up PDF's on my computer. The error message reads, "The application has requested the runtime to terminate in an unusual way. When I click ok the error box I get a message that says adobe reader has stopped working and the program has been closed. FYI I am using the latest version of adobe reader
Operating system is Windows Vista Home Premium..
Version of Adobe Reader is 10.1.13.
Any thoughts on what the issue is? -
Category ABAP Programming Error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
ABAP Program ZMM_MIGO_GOODS_ISSUE
Application Component Not assigned
Date and Time 26.05.2014 14:28:30
Short Text
"C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception has occurred which is explained in more detail below. The
exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
in procedure
"%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated thisHI CHIRUI,
I have changed and tried but still i a getting the same thing..
otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
DATA : BEGIN OF IT_DATA OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Material Slip No
DEL_NOTE(16), " delivery note
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
BWART TYPE RM07M-BWARTWA, " Movement Type
SOBKZ(1), " Special Stock
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
PS_POSID TYPE PS_POSID, " WBS Element
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
SERNR TYPE RIPW0-SERNR, " Serial Number
END OF IT_DATA,
BEGIN OF IT_HEAD OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Reference document number
"HEADER_TXT(25), " Header Text
BWART TYPE RM07M-BWARTWA, " Movement Type
END OF IT_HEAD,
BEGIN OF IT_ITEM OCCURS 0,
ID(10),
"ID1(10),
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
VAL_TYPE TYPE BWTAR_D,
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
CHARG TYPE MSEG-CHARG, " Batch
BWTAR TYPE BWTAR_D,
PS_POSID TYPE PS_POSID, " WBS Element
ERFME TYPE MSEG-ERFME, " Unit
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
CUSTOMER TYPE EKUNN, " Account Number of Customer
SERNR TYPE RIPW0-SERNR, " Serial Number
AMOUNT_LC TYPE BAPI_EXBWR,
SOBKZ(1),
END OF IT_ITEM,
HEADER LIKE BAPI2017_GM_HEAD_01,
CODE LIKE BAPI2017_GM_CODE,
ITEMS LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
SERIAL LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
RETURN LIKE BAPI2017_GM_HEAD_RET,
RET LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
TESTRUN LIKE BAPI2017_GM_GEN-TESTRUN,
IT_TAB TYPE FILETABLE,
GD_SUBRC TYPE I,
L_FILE TYPE RLGRAP-FILENAME,
IT_RAW TYPE TRUXS_T_TEXT_DATA,
COUNT(2) TYPE N,
TEXT_C(30).
DATA: DATA LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
* p_test AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
CHANGING
FILE_TABLE = IT_TAB
RC = GD_SUBRC.
READ TABLE IT_TAB INTO P_FILE INDEX 1.
START-OF-SELECTION.
PERFORM GET_EXCEL_DATA.
PERFORM GET_HEADER_ITEM.
PERFORM UPDATE_DATA.
*& Form GET_EXCEL_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_EXCEL_DATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = P_FILE
IMPORTING
OUTPUT = L_FILE.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_LINE_HEADER = 'X'
I_TAB_RAW_DATA = IT_RAW
I_FILENAME = L_FILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_EXCEL_DATA
*& Form GET_HEADER_ITEM
* text
* --> p1 text
* <-- p2 text
FORM GET_HEADER_ITEM .
DATA : FLAG(1).
LOOP AT IT_DATA.
CLEAR FLAG.
IF IT_DATA-ID IS NOT INITIAL.
AT NEW ID.
FLAG = 'X'.
ENDAT.
ENDIF.
IF FLAG = 'X'.
MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
APPEND IT_HEAD.
ENDIF.
MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
APPEND IT_ITEM.
ENDLOOP.
DATA[] = IT_ITEM[].
IT_TEMP[] = IT_ITEM[].
IT_TEMP1[] = IT_ITEM[].
ENDFORM. " GET_HEADER_ITEM
*& Form UPDATE_DATA
* text
* --> p1 text
* <-- p2 text
FORM UPDATE_DATA .
DATA : COUNT1(10),
L_QTY TYPE I,
DAT(10).
CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
LOOP AT IT_HEAD.
ON CHANGE OF IT_HEAD-ID.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BUDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-PSTNG_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BLDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-DOC_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE : '2' TO HEADER-VER_GR_GI_SLIP,
'X' TO HEADER-VER_GR_GI_SLIPX.
* IF r1 EQ 'X'.
MOVE '05' TO CODE-GM_CODE.
HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
"HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
* ELSEIF r2 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ELSEIF r3 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ENDIF.
* IF p_test = 'X'.
* MOVE 'X' TO testrun.
* ENDIF.
ENDON.
IT_ITEM1[] = IT_ITEM[].
*delete it_item[] where werks = '' and id = it_head-id.
DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
* ON CHANGE OF it_item-id1.
COUNT1 = COUNT1 + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = IT_ITEM-MATNR
IMPORTING
OUTPUT = ITEMS-MATERIAL.
MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
IT_ITEM-LGORT TO ITEMS-STGE_LOC,
* it_item-lgort1 TO items-move_stloc,
IT_ITEM-CHARG TO ITEMS-BATCH,
* IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
'FRESH' TO ITEMS-VAL_TYPE,
IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
* it_item-erfme TO items-entry_uom,
* it_item-sgtxt TO items-item_text,
* it_item-exbwr TO items-amount_lc,
IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
"IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
IT_ITEM-ERFMG TO L_QTY,
IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
IT_ITEM-ORDER TO ITEMS-ORDERID.
* items-SPEC_MVMT = 'R'.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-WBS_ELEM
IMPORTING
OUTPUT = ITEMS-WBS_ELEM.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-VAL_WBS_ELEM
IMPORTING
OUTPUT = ITEMS-VAL_WBS_ELEM.
* CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
* EXPORTING
* input = it_item-lifnr
* IMPORTING
* output = items-vendor.
APPEND ITEMS.
* ENDON.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
DATA: MAT_ITM TYPE MBLPO,
SERNP TYPE SERAIL.
MAT_ITM = '0001'.
LOOP AT IT_TEMP.
SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
IF SERNP IS NOT INITIAL.
LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
* MOVE : it_item1-id TO serial-matdoc_itm,
* MOVE : mat_itm TO serial-matdoc_itm,
SERIAL-MATDOC_ITM = MAT_ITM .
SERIAL-SERIALNO = IT_TEMP1-SERNR.
APPEND SERIAL.
CLEAR IT_ITEM1.
ENDLOOP.
MAT_ITM = MAT_ITM + 1.
ENDIF.
CLEAR IT_TEMP.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = HEADER
GOODSMVT_CODE = CODE
TESTRUN = TESTRUN
* GOODSMVT_REF_EWM =
IMPORTING
GOODSMVT_HEADRET = RETURN
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
TABLES
GOODSMVT_ITEM = ITEMS
GOODSMVT_SERIALNUMBER = SERIAL
RETURN = RET
* GOODSMVT_SERV_PART_DATA =
* EXTENSIONIN =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
* IMPORTING
* RETURN =
IF NOT RETURN IS INITIAL.
WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
ELSE.
LOOP AT RET.
WRITE : RET-TYPE, RET-MESSAGE.
* log-index = sy-index.
* log-matnr = header-material.
* log-message = ret1-message.
* APPEND log.
ENDLOOP.
ENDIF.
REFRESH : ITEMS,RET.
CLEAR : HEADER,RETURN.
CLEAR: TESTRUN ,
RETURN,
ITEMS[],
SERIAL[],
RET[],
HEADER,
IT_TEMP[] ,
IT_TEMP1[].
IT_TEMP[] = DATA[].
IT_TEMP1[] = DATA[].
ENDLOOP.
ENDFORM. " UPDATE_DATA
Regards,
Suresh bheema -
Hello,
After the precompile, I obtained the following error. Who
can tell me where I can find the library "-laio" ?
/usr/bin/ld: cannot open -laio: No such file or directory
Stephen Lee
nullStephen Lee (guest) wrote:
: Hello,
: After the precompile, I obtained the following error. Who
: can tell me where I can find the library "-laio" ?
: /usr/bin/ld: cannot open -laio: No such file or directory
: Stephen Lee
You can't. Linux doesn't yet support asynchronous I/O.
The only thing you can do is to modify your Makefile.
null -
i wanted to update data of excelsheet to mysql database but displaying an compile time error as sub or functions are not defined -------------->(startingrow) please help me out
Dim cn As New ADODB.Connection
Dim number, nRows, wds_id, production_data
cn.ConnectionString = "Provider = MSDASQL.1; Persist Security Info = False;Data Source = mysql32; User ID = root;Password = bmx1; Initial Catalog = wds"
cn.CursorLocation = adUseClient
cn.Open
Dim i As Integer, QryTxt As String
i = StartingRow(wds_id) ---------->In this line
Do Until i = Sheet1.Rows.count
If Sheet1.Cells(i, 1) = "" Then
nRows = i - 1
Exit Do
End If
i = i + 1
Loop
For i = StartingRow(wds_id) To nRows
QryTxt = QryTxt & "update tblprod_agr_006 set wds_id1 = '" & Replace(Sheet1.Cells(i, 1), "'", "''") & "'," & vbCrLf
QryTxt = QryTxt & " column2 = '" & Replace(Sheet1.Cells(i, 3), "'", "''") & "'," & vbCrLf
QryTxt = QryTxt & " column3 = '" & Sheet1.Cells(i, 4) & "'," & vbCrLf
QryTxt = QryTxt & "where conditioncolumn =" & "'" & Sheet1.Cells(i, 2) & "'" & "" & vbCrLf
Next
cn.Execute (QryTxt)First off, is this relating to a Microsoft SQL Server database, or a MySQL database? I see several references to MySQL in your example.
Your code uses a function StartingRow() which isn't a built-in T-SQL function. So, if it is a function you've defined, you need to make sure it's properly referenced in order to use it. (may need a 2 or 3 part name if it isn't in the default
schema or the same database.)
Microsoft SQL Server Storage Engine PM -
ClassNotFoundException at compiling time
I am trying to access MySql database from a java applet, but my java file does not compile with this message error: java.lang.ClassNotFoundException...
I have jdk1.3.1_03 installer under Windows98 SE and compiling with javac.exe...
I have set the autoexec.bat environment to
PATH C:\JDK1.3.1_03\BIN
SET JAVA_HOME=C:\jdk1.3.1_03
SET CLASSPATH=C:\WINDOWS\ESCRITORIO\JAVA\mm.mysql-2.0.13-bin.jar
where i have the jar file. Also have proved withouth the filename on it, and many different combinations. I am completely stuck, please any idea will be very welcome!!!!!!!!
Thanks...
CesarIf you are getting an exception, it is a run-time error not a compile-time error.
Try including your current working directory in your classpath. -
Is there a way to get a datestamp at compile time so it can be comiled into an "about" dialog.
If not, is there a way to extract the version from the jar file at run time and plug it into the message dialog?
Thanks,
--garyThe file date on the file system will not work because when someone downloads the program their local file create date will not match the build date of the program, and the whole reason for the build date is so that people comparing results can verify easily that they are using the same build.
Yes, I have been given many hints, none of which actually work. Mostly they return null pointers at some point. I have tried over a dozen different approaches so far and every one has failed to read the manifest file in my jar. The closest I got was one that read the manifest in some random jar on the classpath, but trying to open the specifc jar has so far resulted in null pointers.
I'm trying to use JarInputStream right now but the code generates a compile time error that someone here in this forum tells me is not possible. I have a hunch the JarInputStream approach is going to work if I can ever get the compiler to accept it.
--gary -
While creating a student through piqstc getting abap run time error
Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti SwainHi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain -
Hey i have a doubt regd compile time constants
byte a =10,b=20;
byte c= a+b; // compile time error coz a+b may exceed byte limit
int a=10,b=20;
int d=a+b; // not showing any error . a+b may exceed int limit
can anyone clear me int hispublic class Test {
public static void main(String[] args) {
byte a = 10, b = 20;
byte c = a+b; //syntax error: "possible loss of precision"
final byte d = 10, e = 20;
byte f = d+e; //OK
}It's not about overflow, but implicit casting: in the expression a+b, bytes a and b
are widened to int and the addition is 32-bit addition -- the result is an int.
When you attempt to assign an int to a byte, the top three bytes are discarded,
hence the syntax error "possible loss of precision". You get the same
error message when assigning a double to a float.
Why don't I get the syntax error with my d-e-f example? Variables d and e
are declared final, so the compiler folds in their values. Thus it know 10+20
is 30 and that the int value 30 fits into one byte. -
Question about compile-time legality rules for cast conversion
Hi, In the rules which explain compile-time legality for cast conversion, it is often mentioned the following scenario in the cast conversion of a compile-time type S to a compile-time type T:
if S is a class type then:
if T is a class type then either |S| <: |T| or |T| <: |S| or a compile time error occurs. Furthermore, if there exist a supertype X of T and a supertype Y of S such that X and Y are provably distinct parameterized types and that the erasures of X and Y are the same, a compile-time error occurs.
As regards the quote in bold, I imagine the following scenario:
1) S <: T and extends Y
2) Y<T1...Tn>
3) X<T1..Tn>
4) T extends X
Does the above represents a supertype X of T and a supertype Y of S such that X and Y are provenly distinct parameterized types? If that holds, what does it mean that the erasure of X and Y is the same?Declarative programing has all but gone the way of
the doe doe because...
1: It is not flexible (It is extremely difficult to
change a complex system in a predetermined way)isn't this the "expert system" model?
2: It lengthens the development cycle (see item 1)
3: It normally forces the developer to add many
things to there code to get things to work, that have
nothing to do with the intent of the code.more things? the declarations or the declaration processing?
In its defense (I like a declarative model but, do
not like being forced into one)...not advocating a forced change in Java
1: It increases code safety.
2: It can shorten the development cycle, in certain
circumstances (especially if it is not overused),
because it can greatly increase the readability of
code.
3: It follows many best practices (although this is
also possible in a Non-Declarative model).as for best practices what I'd like to see are declarative design patterns, Adapter, Singleton, Factory, Delegate, Strategy, Interpreter, Proxy, Visitor
too often the design intent is lost in an implementation or design details can only be deduced by class/field/method names, comments, and accompanying docs
So, if everyone had unlimited time, and an unlimited
budget, yes declaritive is the way to go. Since that
is not the case, we filtered out 99% of what it gave
us, made sure the stuff that was getting in the way
was removed, and what do you have???
You guessed it OOA&D.
Now having said that should we be more declarative? I
think so, but I will tell you now, REQUIRING
declarative elements in code is a sure fire way to
get the majority of development groups to drop the
language (and I think Java as it stands currently CAN
be declarative, so if you have one of those unlimited
budgets, go for it!).no need to require it
I believe given good (reusable) declarative options, on top of OOP, will become the chosen approach
reusable design declarations would lessen overall cost and increase readability
Maybe you are looking for
-
Data from PSA to ODS taking very very long time and fails
Hi Gurus, I have been trying to load data from my CRM system to BI with some range in Data Selection. I was loading to PSA then then Data Target (Package by Package). It failed twice by taking lot of time. Then I brought the data to the PSA only succ
-
Hi Im new to this forum and new to Labview and NI pci 6251 as well ;( I'm using NI-PCI-6251 (DC Motor ) with Labview to control the position of a DC motor we developed the program that reads the encoder and display the position of the DC motor shaft
-
I purchased my Mini in May '06. Overall, I have been pretty pleased as this is my first Mac. However, I have experienced sporatic episodes where it will stop reading commercial DVDs. For the past three days, every time I put in a DVD, it is opened in
-
Hi, I would like to create a multiline text field that the field starts on one pages but finishes on another? Here is an example of what I want. The text starts in the top of the box (1st box) and would continue in the bottom box (2nd box). I have Ad
-
Creating a dynamic interactive form
I have been working at trying to get a text field that expands when more text is added to the field. I have been looking at the sample Purchase Order form that came with Designer and when I look at the properties of the subform for the comments field