Compiler File Error

I am unable to burn DVDs in DVDSP2. I get the same message each time: Compiler File Error. I have tried compressing as MPEG2, I have tried moving media to boot drive and I have tried re-loading Compressor and DVDSP and upgrading before opening. I have tried everything suggested here to solve this issue but have been unsuccessful so far. Any thoughts?

I used the "DVD: Best Quality 90 minutes" presets in Compressor (Dobly Digital Pro 2.0 and MPEG-2 2.6Mbps 2-pass). By "gaps in the timeline" do you mean the FCP timeline? If so, no, there is only one movie.
The project does not build at all. I click BURN, the INITIATE dialog box appears and closes immediately. The log then shows COMPILER FILE ERROR.

Similar Messages

  • Formatting Failed:  Compiler File Error

    Hello...
    Yesterday I got my crossgrade disks from Apple, so I upgraded my G4 Powerbook with the full Studio Pro upgrade, then made sure I had all current patches.
    When I opened up one of my DVD Studio Pro projects and clicked Burn, It failed with a dailog box that said "Formatting failed, Building was not successful, See log" so I looked at the log and it said in red "Compiler File Error"
    This project worked fine before I upgraded... So, for grins, I started from scratch and rebuilt the project and reimported the assets. Now I had just recompressed the video/audio with the new compressor as well... Anyway, same result. Also, when it fails, the OS-X window pops up that you normally get once you insert a blank DVD and you can choose an app or hit ignore.
    Can't figure this out... Any help would be greatly appreciated.
    Dave
    Powerbook G4   Mac OS X (10.4.3)  

    Once I upgraded, I recompressed the video (its about 14 min, and uses Dolby, not AIFF)... When I opened DVD Studio Pro, it prompted me that assets had changed, I said ok, then tried to burn and go the error. I then tried deleting the PAR folder, no help. So, I just closed the project, hit NEW and recreated the project (it was rather simple) and then tried to burn... Same error.
    I burned this same DVD two days ago under the old pre-universal version and it worked fine. I only recompressed because I heard that the new version performed much better.
    Sorta lost on this one... I don't see any reason why it shouldnt work. The log only says the one line and gives no other help.

  • What is a Compiler File Error?

    I'm getting this error message when I try to burn my DVD.
    "Starting DVD Build ALLINTHEFAMILY...
    Compiler File Error"
    It happens right away. What's wrong?

    I think there is a bug in DVDSP4 and Apple needs to address this ASAP. The workable fix is to delete the DVDSP4 preference files.
    I was having the described problem, and I've seen numerous discussions of the issue on blogs and groups all over the net. In any case, when you have this "Compiler File Error" message, exit DVDSP, navigate to user->library->preferences->com.apple.dvdstudiopro.plist and toss that puppy in the trash. Empty the trash. Restart DVDSP and burn without further problems...at least until next time!
    Hey APPLE! Wake up and fix this for us!!! Thank you!
    In Service of Mankind,
    -Ruth

  • How do you fix a "compiler file error" in DVD Studio Pro?

    I've tried to burn a DVD from a project file in DVD Studio Pro a couple times now and get a "Compiler File Error" each time. What does it mean and how do I fix it?
    Thanks.

    where are you assests from? did you use compressor to create a mpeg2 and dolby audio file? did you export self contained and bring into compressor? or a reference movie? What were your orginal seq settings? More details.

  • Continuous 'Compiler File Error'

    I've tried to burn various projects recently and each time I am getting a 'Compiler File Error' message. Can anybody advise what I should do to get rid of this. It's a real pain!
    Basically I have various projects which I'm unable to build it at all. Here's a run down on what's happening from the log...
    Starting DVD Build...
    Compiler File Error (in red)
    Build Cancelled
    Formatting Finished
    Building was not successful. See log. (in yellow)
    And there's nothing about this error message in the Help guide either.

    I had the very same problem. I simply moved the DVD Studio Pro prefs file found in system library>prefrences to my desktop. DVDSP will automaticly create a new pref file. If it fixed the problem you can trash the old pref file. This worked for me.

  • Compiler File Error - DVDSP4

    I'm having a problem with DVDSP4 and burning DVDs.
    I now receive a "Compiler File Error" when attempting to burn a DVD. This is the first time I've encountered this problem. It occurs before the burn process actually starts. Does anyone know what causes this, and if there is a known work-around?
    Currently running OSX 10.4.7, DVDSP 4.03, on a G5...
    Thanks in advance.
    G5   Mac OS X (10.4.7)  

    Thanks for the help all! Sorry I didn't think of using the search. I browsed through the first 5 pages or so, and didn't find what I was looking for, but it never occured to me to actually search for it... d'oh!
    At any rate, the Compiler error still occurs when I use the "Burn" feature, but I was able to Build & Format successfully. There was no preference file to delete (I'm assuming this is because none of the preferences have been changed, thus a seperate file was never created), but I did repair permissions, to no avail. I tried a reboot a number of times as well.
    Thanks again, I'll keep searching to try and solve my problem.
    G5   Mac OS X (10.4.7)  

  • Help ! ever seen this in DVD Studio Pro : 'Compiler File Error' ?

    Help !
    This is a strange problem :
    Evertime I try to burn a disc, it says :
    Starting DVD Build DVD_
    Compiler File Error
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    Now I tried several different projects and it does it on multiple computers.
    Only explenation would be something I did in my DVD menu, or assets.
    If I burn it on my powerbook though, it works perfectly....
    Harry Potter was busy, so please help me, I'm getting desperate...
    Have the latest update, the latest OS, en DVD Studio Pro 4.2

    Welcome to the boards.
    Take a look at the log as it is compiling and see where the compile stops/crashes. Also download MPEG streamclip and open up the last VOB in the build folder in MPEG Streamclip. (VOB ares here, you will have different VOBs of course and numbers but look at the last one that has something in it) http://dvdstepbystep.com/vts.php It will show you the last part was compiled properly so you can look at the asset in the DVD SP project.
    Some things to look for
    1.) Gaps in the timeline in the audio or video. In fact I just had this happen. The project compiled fine in an older version of DVD SP (4.03) BUT would crash out at 4.2. Turns out there was a gap I had missed (doh!) somehow and cleaning it up would then cure then problem.
    2.) Did you make the audio AC3? What rates were the video encode? High rates can cause the compile errors.

  • DVD Studio Pro: Compiler File Error

    Hi there,
    I'm running DVD Studio Pro 4.2.1 on Mac OS X 10.5.8, and until now, I've been successfully burning DVD projects. But suddenly, when I try to burn a DVD, I keep getting a message stating that the "build failed" due to a "compiler file error." Any clue how to solve this? My sound file is a .ac3, and my video is a .m2v.
    Thanks!

    It could be a number of things. Generally, you should try renaming your m2v and then re-importing it and setting it into the track it is in. Also, try trashing the PAR files (check your preferences for the location of these) which get created when you import an asset.
    Finally, try simply re-encoding the footage and going from there (add a new name for it too...)

  • Build Error Message "Compiler File Error"

    Whenever i try to burn a DVD in DVD studio pro i get this error message:
    "Starting DVD Build UNTITLED_DISC...
    Compiler File Error
    Build cancelled
    Formatting finished.
    Building was not successful. See log."
    This occurs no matter how big my project is, how many files i use, or what format. I thought originally the video files i were using to burn were corrupted, but i have since tried many different video files and many different formats. This message continues to come up. I have even reinstalled DVD Studio Pro and nothing has changed.
    I don't have any clue what's causing this message or how to fix it???
    I WOULD REALLY APPRECIATE THE HELP! THANK YOU!

    keentave wrote:
    Thanks for the help. I figured out the problem or at least one of the causes. I deleted the update: user->library->preferences->com.apple.dvdstudiopro.plist and it fixed it.
    That does not delete the update, it is deleting the preferences (which is one of the things always to do when things go nutso

  • DVDSP 4: Compiler File Error when burning

    I'm using DVD Studio Pro with a new LG DVD burner. (I'm on OS 10.4.) When I try and burn a DVD I get "Compiler File Error" and nothing else. The manual has nothing about this. What's this mean?
    thanks,
    Scott

    Hi Scott,
          I've seen this a few times on the forums and it seems the best solution is to trash your DVDSP preferences
    with this.
    http://www.digitalrebellion.com/prefman/
    DM

  • Starting DVD Build - Compiler File Error ?

    I am just trying to burn off a quick looping DVD for a client to view. It's a self contained QT file exported directly from FCP. I just used one track as first play and set it to jump to beginning of that track when finished.
    Simple steps I used to do all the time on my previous iMac with FCP 5.1.4 and the older DVDSP. Brand new Mac Pro with fresh install of FCS 6.0.2 this is the first time using DVDSP and I'm wondering why it's doing this? I've never seen this before...

    man... im pretty much stumped now...
    i guess there wouldnt be any parse files since its not even letting you get that far.
    even though its Final Cut Studio 2. DVDSP didn't change it's still 4 and stayed exactly the same. my assumption is it has either something to do with permissions somewhere or something is jacked in the software somewhere...
    i would say you could trash your DVDSP preferences which would be the last hope thing i would do.
    located: Home folder -> library -> Preferences -> com.apple.dvdstudiopro.plist
    i just deleted mine the other day for some parsing and incompatible file format stuff... just keep DVDSP pro closed delete it and reopen DVDSP and it creates a new one.
    it does reset you preferences though.. so you will have to create new paths if you have changed them.. but it doesnt sound like you have so you should be fine.
    keep me updated. ill try to think of something else and ask one of the other editors if he remembers what we did. (i do all the authoring here though)
    sorry bro. im trying!

  • Fpga compile worker error (file not found)

    Hi
    I try to get started with the FPGA functionality of cRIO and got stuck. This seems to be no issue of the cRIO(9014) but of the Xilinx software together with NI.
    I am running an English LV 2011 ( many previuos versions installed as well) on  a German Windows XP prof. 32 bit.
    I was setting up a little project and when it came to compiling ran into errors. First I asked a colleague than I checked the NI support web site. Next time I'll contact the NI local support, but maybe some of you guys hast a faster answer before.
    1. I want to run a local compile server. I can start it from start> programs>NI> FPGA. Up pops a  question whether I want to allow others to connect remotly. The answer seems to make no difference.
        I do not see any icon in the task bar or elsewhere. SHOULD I see a process running in the task manager ? 
    2. The NI Service locator seems to be running http:/localhost:3580/dump shows a table  like attached. SHOULD I see the server running here ?
    3. If I start the Compile Worker after some seconds I get a message saying something like file not found. I think, compile server error is only a followup.
    I have already re-installed the Xilinx-Tools from the down loaded iso. (that having started yesterday night ......) .
    I attach as well the log file. (would have liked, but three is the max)
    That whole system of compilation seems to be not very stable when I see all the posts, but I have not found these specific errors.
    So I still hope someone has an idea.
    Thanks in advance
    Gabi 
    7.1 -- 2013
    CLA
    Attachments:
    ServiceLocator.jpg ‏47 KB
    XilinkNotFound.jpg ‏101 KB
    FPGA Fehler.jpg ‏44 KB

    Gabi Tillmann wrote:
    Second thoughts:
    Is it really worth using that so highly promoted FPGA  on cRIO  ???? We'll see.
    This Question is technically wrong!
    Whenever you are using the C-Series IO-Modules of the cRIO you are using the FPGA, even in ScanMode where NI RIO loads pre-defined bitfiles onto the FPGA.
    The FPGA provides you ns Timing, it gives you nativly true parallelism, you are directly programming the bahaviour of FlipFlops, LUTs, Registers and so on.
    It gives you the ability to programm hardware without the need to understand complex HDL languages.
    The cRIO is besides PXI the most flexible and powerful (908x) platform NI offers. The decision to use an FPGA or to use a cRIO should not be "because it's there".
    The decision to use an FPGA-based Platform depends on the complexity of the application, just think about custome beahviour of IOs or custom triggering.
    Christian
    P.s.: Great that you solved your compiler issue.

  • Error compiling file?!

    Hello,
    For the third time I tried now to render a Quicktime (photo jpg and also h264) but somewhere on the last frames it skips the render with the message "error compiling file" - unknown error...
    Does anybody has any idea why and what to do ?
    Thanks :)
    pearl

    AAMinistries which Adobe software or service is your inquiry in relation too?  What are you currently attempting to accomplish?

  • No such File Error

    Hi I am getting a no such file error though I am calling functions correctly. I am able to compile successfully but getting these runtime errors.
    Can anybody point out what mistake I am doing:-
    Here are the error lines:-
    java.io.FileNotFoundException:  (No such file or directory)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(FileInputStream.java:137)
            at java.io.FileInputStream.<init>(FileInputStream.java:96)
            at java.io.FileReader.<init>(FileReader.java:58)
            at Clamando$Roger3.readFile(Clamando.java:96)
            at Clamando$Roger3.<init>(Clamando.java:85)
            at Clamando.main(Clamando.java:260)
    java.io.FileNotFoundException:  (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:137)
        at java.io.FileInputStream.<init>(FileInputStream.java:96)
        at java.io.FileReader.<init>(FileReader.java:58)
        at Clamando$Roger3.readFile(Clamando.java:96)
        at Clamando$Roger3.<init>(Clamando.java:85)
        at Clamando.<init>(Clamando.java:50)
        at Clamando$1.run(Clamando.java:265)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:226)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:602)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:275)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:200)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:185)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:177)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:138)readFile(filename); line 85
    BufferedReader fh = new BufferedReader(new FileReader(filename)); line 96
    getContentPane().add(paintPanel, BorderLayout.CENTER);
    new Clamando(0, 0, 0, 0, null, null).setVisible(true);
          public class Clamando extends JFrame {
                  public Color color;
                  public int top;
                  public int fixvalue1;
                  public int fixvalue2;
                  public int width;
                  public String text;
                  public int end;
                  public int value1;
                  public int value2;
                  public int mywidth;
                  private JPanel Roger3;
          public Clamando(int top, int fixvalue1, int width, int fixvalue2, Color c,String text) {
            this.color = c;
            this.top = top;
            this.fixvalue1 = fixvalue1;
            this.width = width;
            this.fixvalue2 = fixvalue2;
            this.text = text;
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          setMinimumSize(new Dimension(1000, 200));
          Roger3 = new Roger3();
          getContentPane().add(Roger3, BorderLayout.CENTER);
          pack();
          static class Roger3 extends JPanel implements MouseMotionListener, MouseListener {
          public List<Glyph> glyphs;
              public int top;
              public int bottom;
              public int width;
              public String f[];
              public int value1;
              public int value2;
              BufferedImage image;
          Graphics2D g2d;
              Point startPoint = null;
              Point endPoint = null;
              public int start;
              public int x;
              public int y;
              int scaledvalue;
              public int end;
              public String filename = new String();
            public Roger3(){
                super();
                addMouseMotionListener(this);
                addMouseListener(this);
                boolean mouseClicked = false;
                readFile(filename);
                System.out.println(filename);
            public void readFile(String filename){
               this.filename = filename;
               glyphs = new ArrayList<Glyph>();
               String n = null; 
            try{
                BufferedReader fh = new BufferedReader(new FileReader(filename));   
                while((n = fh.readLine()) != null && (n = n.trim()).length() > 0){
                    f = n.split("\t");
                    value1 = Integer.parseInt(f[5].trim());
                    value2 = Integer.parseInt(f[6].trim());
                    top = value1 / 1;
                    bottom = value2 / 1;
                    width = bottom - top; 
                    String text = f[5];
                    Color color = new Color(Integer.parseInt(f[7]));
                    int fixvalue1 = 60;
                    int fixvalue2 = 27;
                    glyphs.add(new Glyph(top, fixvalue1, width, fixvalue2, color, text));
                fh.close();
            } catch (FileNotFoundException e) {
                e.printStackTrace();
            } catch (IOException e2) {
                e2.printStackTrace();
          public void paintComponent(Graphics g) {
          public void mousePressed(MouseEvent e) {       
          public void mouseDragged(MouseEvent e) {
          public void mouseReleased(MouseEvent e) {
          public void mouseMoved(MouseEvent e) {
          public void mouseClicked(MouseEvent e) {}
          public void mouseEntered(MouseEvent e) {}
          public void mouseExited(MouseEvent e) {}
          static class Glyph {
          private Rectangle bounds;
          private Color color;
          private Paint paint;
          private String label;
          private boolean showLabel = false;
          public Glyph(int x, int y, int width, int height, Color color, String label) {
          bounds = new Rectangle(x, y, width, height);
          this.color = color;
          this.paint = new GradientPaint(x, y, color, x, y+height, Color.WHITE);
          this.label = label;
          public void draw(Graphics g){
          Graphics2D g2 = (Graphics2D)g;
          g2.setPaint(paint);
          g2.fill(bounds);
          if (showLabel){
          g2.setColor(Color.BLACK);
          int labelWidth = g2.getFontMetrics().stringWidth(label);
          int fontHeight = g2.getFontMetrics().getHeight();
          g2.drawString( label,
          (int)(bounds.getX()),
          (int)(bounds.getY()));
          public boolean contains(int x, int y){
          return bounds.contains(x,y);
          public void showLabel(boolean show){
          showLabel = show;
          public static void main(String args[]) {
           Roger3 hhh = new Roger3();
           hhh.readFile(args[0]);
          java.awt.EventQueue.invokeLater(new Runnable() {
          public void run() {
          new Clamando(0, 0, 0, 0, null, null).setVisible(true);
        public Color getColor(){
            return color;
        public String toString() {
            return String.format("Color=%s,top=%d,bottom=%d,width=%d", color.toString(), top, fixvalue1, width, fixvalue2, text);
          }Thanks

    I tried the same thing like this and it works perfectly but why its not working in the above code ?
    Here is the code that works:-
    import java.io.FileNotFoundException;
    import java.io.BufferedReader;
    import java.io.*;
    public class Testwow {
        public String filename = new String();
        public int one;
        public int two;
        public String f[];
        public Testwow(){
            readFile(filename);
            System.out.println(filename);
        public void readFile(String filename){
               this.filename = filename;
               System.out.println(filename);
               String n = null; 
               BufferedReader fh;
            try{
                fh = new BufferedReader(new FileReader(filename));   
                while((n = fh.readLine()) != null && (n = n.trim()).length() > 0){
                    f = n.split("\t");
                    one = Integer.parseInt(f[5].trim());
                    two = Integer.parseInt(f[6].trim());
                    System.out.println(one);
                    System.out.print(       two);
                fh.close();
            } catch (FileNotFoundException e) {
                e.printStackTrace();
            } catch (IOException e2) {
                e2.printStackTrace();
        public static void main(String args[]){
            Testwow wow = new Testwow();
            wow.readFile(args[0]);
    }

  • Compile time error

    I am a newbie in XML. I am trying to compile the following code. I am getting compile time errors. I have following environment varaibles set. Any help will be really appreciated.
    TIA.
    set JAVA_HOME=C:\Program Files\jdk1.3.1_03
    set JWSDP_HOME=C:\Program Files\jwsdp-1.1
    set JAXB_HOME=%JWSDP_HOME%\jaxb-1.0
    set JAXB_LIBS=%JAXB_HOME%\lib
    set JAXP_LIBS=%JWSDP_HOME%\jaxp-1.2.2\lib
    set JWSDP_LIBS=%JWSDP_HOME%\jwsdp-shared\lib
    set PATH=%JAVA_HOME%\bin;%JAXB_HOME%\bin;%JWSDP_HOME%\jwsdp-shared\bin;%PATH%
    set CLASSPATH=%JAXB_LIBS%\jaxb-api.jar;%JAXB_LIBS%\jaxb-ri.jar;%JAXB_LIBS%\jaxb-xjc.jar;%JAXB_LIBS%\jaxb-libs.jar;%JAXP_LIBS%\jaxb-api.jar;%JAXP_LIBS%\endorsed\xercesImpl.jar;%JAXP_LIBS%\endorsed\xalan.jar;%JAXP_LIBS%\endorsed\sax.jar;%JAXP_LIBS%\endorsed\dom.jar;%JWSDP_LIBS%\jax-qname.jar;%JWSDP_LIBS%namespace.jar;.
    C:\Learn XML>javac -verbose CountSax.java
    [parsing started CountSax.java]
    [parsing completed 63ms]
    CountSax.java:3: package org.xml.sax does not exist
    import org.xml.sax.* ;
    ^
    CountSax.java:4: package org.xml.sax.helpers does not exist
    import org.xml.sax.helpers.* ;
    ^
    CountSax.java:5: package javax.xml.parsers does not exist
    import javax.xml.parsers.*;
    ^
    CountSax.java:7: cannot resolve symbol
    symbol : class DefaultHandler
    location: class CountSax
    public class CountSax extends DefaultHandler {
    ^
    [loading C:\jdk1.3.1_02\jre\lib\rt.jar(java/lang/String.class)]
    CountSax.java:22: cannot resolve symbol
    symbol : class Attributes
    location: class CountSax
    public void startElement(String name,Attributes atts) {
    import java.io.* ;
    import org.xml.sax.* ;
    import org.xml.sax.helpers.* ;
    import javax.xml.parsers.*;
    public class CountSax extends DefaultHandler {
    public static void main(String args[]) {
    SAXParserFactory factory = SAXParserFactory.newInstance() ;
    SAXParser saxParser = factory.newSAXParser() ;
    saxParser.parse(new File(args[0]),new CountSax()) ;
    static private int eltCount = 0 ;
    public void startDocument() {
    eltCount = 0 ;
    public void startElement(String name,Attributes atts) {
    eltCount ++ ;
    public void endDocument() {
    System.out.println("Total number of elements: " + eltCount) ;
    }

    Here is my classpath now
    set CLASSPATH=%JAVA_HOME%;%JAXB_LIBS%\jaxb-api.jar;%JAXB_LIBS%\jaxb-ri.jar;%JAXB_LIBS%\jaxb-xjc.jar;%JAXB_LIBS%\jaxb-libs.jar;%JAXP_LIBS%\jaxb-api.jar;%JAXP_LIBS%\endorsed\xercesImpl.jar;%JAXP_LIBS%\endorsed\xalan.jar;%JAXP_LIBS%\endorsed\sax.jar;%JAXP_LIBS%\endorsed\dom.jar;%JWSDP_LIBS%\jax-qname.jar;%JWSDP_LIBS%namespace.jar;.
    It still doesn't work. The pakages that it is complaining about comes from sax.jar which is already in classpath. Can anybody please help.
    TIA

Maybe you are looking for

  • Printing Barocdes on XML Publisher output

    Hii, My requirement is to print the barcodes for few fields in the output. We have developed the report in XML Publisher 5.6.3. As per Oracle i need to create a Class file and then Call that Class file from Template. I am done with the Class file wit

  • Way to Stop Errant New Event Creation on Click in Month View?

    When in Month view in Calendar (Mac, 10.9.2), double clicking on a day creates a new event. Is there a way to change the settings so double-clicking on a day opens Day view instead of creating a new event? Based on how frequently I have this problem

  • Publishing bug with FTP servers - Spaces at end of file/folder names

    I'm sharing what I've found after lots of troubleshooting with my Mom's iWeb website. I originally came across this in the previous version of iWeb, and have seen it again in the current version. For the sake of this example, she had an image gallery

  • Question on Sorting and Filtering Viewlet for CR for VS10 Production Rel

    The demo shows great and easy to implement features but near the end when the demonstrator clicks on the Sort for Product Type, the report doesn't sort by this column. Was this because he needed to press "Apply" as he did when he filtered the report

  • Can i use airserver to stream to apple tv 3

    guys i have been able to stream stuff from my iphone to my macbook pro , but i was wondering can i use airserver to stream stuff to my apple tv 3 concerning apps such as quicktime .....