Compiler will not run -- what to do?

Just installed SDK -- cannot access the compiler. Followed the Install Instructions -- no error message. Server Admin Console runs just fine. Any suggestions?

Java does not have a "Server Admin Console".
What exactly did you install - possibly Java EE SDK? If so, that's wrong - install the Java SE SDK.

Similar Messages

148:3, is showing up as an error and my program will not run, what to do ?

148:3, is showing up as an error and my program will not run, what to do ?

Error 148:3 is a licensing error for Adobe Paid apps like Photoshop or Flash Professional...
WHERE exactly are you seeing this error?

I have purchased Mosaic world and it keeps crashing and when I try to reload it it will not run what can I do?

I have purchased Mosaic World and it keeps crashing and when I try to restart it, it will not work. What do I do?

Hello Vicarage00,
It sounds like the app on your iPad is quitting unexpectedly. I recommend following the steps in the article below for an issue like this (you can skip the step to download another app from the App Store since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

Mini ipad is disabled and I downloaded Itunes but the exe file will not run

mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

Windows 8.1 will not run my install CD for Photoshop 5.0. What can I do ?

Windows 8.1 will not run my install CD for Photoshop 5.0. What can I do ?

i'm not sure your expectations are realistic. ps 5 was designed for win95.
you can't fault adobe for failing to design ps 5 so it would be compatibile with an os that wasn't in existance when ps 5 was released.
to be sure, adobe did not warrant their software would work with all future operating systems. and no other software company can or does make such a claim.

I dl'ed V. 4.0 and it will not run on my Mac with OS 10.4.11. What to do? I trashed v.3.0 and it is lost.

I dl'ed V. 4.0 and it will not run on my Mac with OS 10.4.11. What to do? I trashed v.3.0 and it is lost.
If V.4.o is not supported by my OS, can I dl the previous version (3.0)?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

No matter what I do, I cannot get Firefox to run Java correctly. I've deleted the cache, etc., etc., but my school programs will not run on Firefox.

Firefox (v. 18.0.1) will not run my school programs any more since the Java scare. It also is choking at running screencast-o-matic.
And this is happening on both my computers not just one.
I have emptied Java cache, emptied the browser caches, downloaded the latest Java, Reinstalled it. Cleared caches again, etc., etc., etc.
Firefox will not run Java and I have to use IE which is the only browser that I have gotten the scripts to function so that I can use my programs.

Been there done that. Actually I have even install a fresh Firefox on virgin win8 64-bit laptop (without synchronising to my firefox in general) with the absolutely latest Java - didn't help either. And my test page is not the only one, but as I did this myself I know exactly the contents.
Since then my Firefox is in sync... well more or less as it seems it only sync some ways but that is another matter... but at least most of my stuff is back in place.
What I know is that the egg.html takes forever to load, and that the java part never shows. I think that this goes for most Java places, but I do remember that it was not always the case. Right now even the Oracle test page can't find Java, and I know it could at some point. Reinstalling tells me I already got Java, so it is there, likewise it is active in the plugin window. But some parameter some where must have gone haywire.

I have recently purchased finale 2011, and it installs, but will not run? Any idea what the problem is?

I have recently purchased the finale 2011 music program, and it installs without any problems, but will not run when I try to start up the program. It acts like it is going to start, but stops when loading the plugins. I have been talking with Finale tech support for three days, and they are coming up empty, but they are still trying. Any ideas what the problem might be?
Thanks,
John

Try booting in Safe Mode (hold the shift key while booting until the grey progress bar appears).
If you're able to log-in, then re-boot and log-in

Just purchased Imac running Lion - doc. and cwk. extensions will not open . whats the fix?

just purchased Imac running Lion - doc. and cwk. extensions will not open. whats the fix?

Pages 4.3 is the most recent, but no matter. If Pages cannot open it, there are many other programs that may be able to. Some of them are free.
LibreOffice (donation-supported)
NeoOffice ($10 but older version is free if you can find it)
OpenOffice (completely free)
Try TextEdit also. It is included in OS X.
If you are trying to open the document by double-clicking it, don't, since the Finder may be looking for a program that is no longer installed. Use Pages' File > Open... menu. The same recommendation applies to using any of the above alternatives - use their File > Open menu.
The least attractive alternative is to purchase Microsoft Word, but I have been completely Microsoft-free since updating to Lion.

ITunes 10 will not run on Windows 7, 64 bit

I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?

BB Desktop Software 6.1 will not run on Windows 7 64-Bit

I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is. A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
Thank you all so much in advance once again! (Below is my original plea for help.)
P
Hi.
I have read in these forums and am still lost. I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
I try to be a good lil girl and follow forum rules, but am lost here.
I bought a new laptop, a Dell 17R It runs Win 7 I think. Lots of ROM/RAM. I dowloaded the desktop program from bb dot com and cannot get it to work. First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
It then acknowledged my Torch and dld my photos. Then it decided I didn't have space and undid whatever it did.
NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
I need someone who understands this gobbltygook to explain to me what to do. I need to unload my photos, as I use my phone to take pix more than I would have thought.
I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them. (It took my YEARS to spring for this laptop)
Thank you in advance for your patience.
P

I have the same issue. It gets to a desktop manager picture and just freezes.

Firefox 4.0 will not find update to 4.0.1, add-ons for 4.0.1 will not run

30 May 2011, 18:22h UTC
Downloaded 4.0 UK-edition on my laptop, the 4.0 US-edition on my desktop, and the 4.0 UK-edition on a 2nd laptop.
On mine, updates to 4.0.1 are not found, some add-ons were taken off, as incompatible, that ran on the 4.0 on my desktop (and weren't on the 2nd laptop). Add-ons, now already even compatible with 4.0.1 (running on the 2nd laptop) will not run as 'incompatible' with 4.0 (though listed on the add-ons site as compatible.
It has stopped telling me that 'something' is pretending to be an update from Firefox (whatever that 'something' be?) since setting the browser to updating manually, but asking me first what to do. All currently installed add-ons have not asked me for some time (though on other computers), and also report as fully up-t0-date.
Ergo: Neither Firefox 4.0 nor any installed add-ons update correctly.
Didn't crash, though it 'likes' doing that after printing (always Badly! with dreadful printing options/previews), leaving two tabs (rather than the one before), both of which only can be shut from their context menus. Crash reports have been sent with same email address, but not been answered. This browser has all the qualities of a Beta-release and needs some serious overhauls (it's also not very new or much safer!).
Example for an add-on that won't install on 4.0, but will under 4.0.1: CookieMonster - which is desperately needed, given your browser still suffers from minimal, insufficient cookie management, incl. lists of domains that wish to set 'another' cookie when no cookies are as yet, allegedly, sitting on the computer.

I've since updated manually to 4.0.1, but haven't yet tried the full uninstall version, because I have to export plenty of settings first (and/or manually copy them). Also means I'd have to start from scratch with many customizations in No Script.
That said, I'll try the 'Safe Mode' option tonight, thank you :-)!
If I have to uninstall the whole shebang, I'd be more tempted to go back to 3.6.x until a few more of 4's teething problems (e.g. the messy print dialogues, particularly preview, which regularly doesn't even work) have been tackled.
Thanks-1M! for now - keep you posted.

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
the differences between os operations & dlls loaded but am unable to find the OS issue.
Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?

You must provide the exact name and version of the software for anyone to attempt to answer your question. Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Boot Camp Update 2.1 will not run

I'm trying to install Windows XP on my Intel Macbook. It's a legal copy purchased from Microsoft so no trouble there.
The Bootcamp Assistant worked fine and the Windows install worked fine. I'm now at the point of trying to install the Boot Camp drivers but I don't have my Leopard disc available. (I bought a an OS X Family Pack and my son currently has the discs 20 miles away.)
Accordingly, I downloaded the Boot Camp 2.1 update from Apple but it simply will not run under Windows in the Boot Camp partition. It briefly looks (1-2 seconds) as though it's starting, but then never does.
I tested the .exe file on a pure Windows machine and it runs fine so there's no file corruption problems.
I've searched online but can't seem to find any solution to this particular problem.

djrichards wrote:
Thanks for the response, Stefan.
But that's not what the Apple download page says. Specifically it says the following.
"Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS."
Hi,
I admit I haven't ever taken a closer look at that and as said to my knowledge, the 2.1 update only works with the 2.0 drivers already installed.
Just did a quick googling and couldn't find any success story of using the 2.1 Update as a standalone driver install without having the 2.0 driver installed before.
Do you have the needed Admin rights when running the update.exe ?
Stefan

Compiler will not run -- what to do?

Similar Messages

Maybe you are looking for