Compiling Media invalid file path error when buring a DVD

Hello,
I have updated to 3.0.2 Premiere Elements and the latest XP Home updates. I had 2.0 and it worked without any problems. I bought 3.0 and have had nothing but problems, I can capture, access files and put a video together but no matter if to file or to DVD I always get this error
"Burn DVD Progress screen"
"Compiling Media invalid file path"
then it all stops and nothing.
Any help or suggestions appreciated, I searched the web for this error and found nothing, when I search here I seem to get every Adobe product comes up but no premiere.
Thank you

I started to do the FAQ to build a clean AVI file. I also re-installed the program, did an update to 3.0.2, defrag. Made sure I had 118gig space. All in order. Still I got the errors. Then I thought perhaps since this pointed to a path that somewhere a path was not correct. So I looked under Preferences - scratch disks - and found they all pointed to the D drive where I had some old Adobe files. It appears the 2.0 version worked when I had the files stored on another partition and 3.0 did not like this. So when I moved everything in Scratch Disk to the same folder on C: where I installed 3.0 things seemed to begin to work.
I tested it by burning to a file and then to an actual DVD and both worked well. I have a quad core chip.
Now the problem seems to be when I edit each end of a clip, "the IN and OUT" the in does not seem to be saved or rendered. When I get to the preview I can still see and hear date prior to the SET IN. I save, re-save and re-render and it still happens. However some clips it works fine.
Thanks again for pointing me in a direction so at least I can start to trouble shoot.

Similar Messages

Invalid File Name Errors when syncing to Ipod

Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
The windows would keep popping up countless times until the sync would just seem to time out and stop.
The problem songs would have no problem playing in iTunes.
Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
8. Changing or deleting the tags has no effect at all.
9. File name lengths are already under 200 characters and there are no special characters used.
So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
Is there a better way to fix the problem? Especially if someone knows the root cause?

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

"Invalid file name" error when trying to load the report in IIS/CR 2008

We have deployed our application to many installations with no problem however in one particular case we get this error whenever we try to load any reports in our web app.
I made sure that the DefaulAppPool user (Network Service) has read+excute on all folders as well as the IIS anonymous user.
The anonnymous access is off but Windows Integrated Security is on.
ASP.NET Version:2.0.50727.3082
Web.config is healthy and is listed below.
Other pages in the application which are not depenent on C.R load and run perfectly.
I don't know what else to check
thanks for you help
jeff
Web.Config Entries related to CR ***********
<compilation debug="true">
<assemblies>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</assemblies>
<buildProviders>
<add extension=".rpt" type="CrystalDecisions.Web.Compilation.RptBuildProvider, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></buildProviders>
</compilation>
ERROR DETAILS *****************
[COMException (0x800001fb): Invalid file name.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +418
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID() +31
   CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport(RequestContext context, Boolean bAddToCacheWhenCreated) +474
   CrystalDecisions.ReportSource.CachedObjectReportSource.InternalGetReport(RequestContext context, Boolean bAddToCacheWhenCreated) +15
   CrystalDecisions.Web.CrystalReportSource.get_ReportDocument() +184
   CrystalReportPageTemplate.OnInit(EventArgs e) in

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

Bug : Invalid file extension error when opening exported excel

Hi All,
In one of my jsff page, i have implemented 'exportToExcel' functionality through a exportcollectionactionlistener on a table to export its data to excel. When i try opening the generated excel, i get the following warning in excel 2007 :
"The file you are trying to open, 'Export.xls,' is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?" - When I clicked YES to the message, the exported excel opened and data is present.
How can i get rid of this warning message, because it is annoying for any user to click YES every time the excel is opened ? I am using jdev version 11.1.1.6.0 This is my code :
<af:commandToolbarButton text="Export to Excel" id="cb1">
<af:exportCollectionActionListener exportedId="t1"
                           type="excelHTML"
                           filename="Export.xls"
                           title="Excel export"/>
</af:commandToolbarButton>I found a similar forum post here File format of exportCollectionActionListener ADF 11g But they are suggesting a registry fix which is not possible in production environment.
Any possible workaround or suggestions to resolve this issue is much appreciated.
Thanks

You can save the data on the client and the check the data.
Have you considered using POI to generate real xsl workbook files?
Timo

Invalid Report File Path Error

I have included several Crystal Reports as embedded resources in a Visual Studio 2010 C# project. When I try to run the application on a client PC I receive an invalid report file path error. Why am I receiving this error if the rpt is embedded in the manifest?

The following code now works on my development machine. It obtains the server name and database name from the configuration file. When I run on my client PC, however, it prompts me to log into the database. It provides the correct server name but the database name is blank and integrated security is not checked. The database name field is not enabled so I cannot provide a value.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine; //jp
using CrystalDecisions.Shared; //jp
namespace WindowsFormsApplication1
    public partial class FormRptArtist : Form
        private CrystalReport1 crReportDocument = new CrystalReport1();
        public FormRptArtist()
            InitializeComponent();
            ToolTip toolTip = new ToolTip(); toolTip.SetToolTip(btnHelp, "Flash Video Training / Help");
            helpProvider1.HelpNamespace = GlobalClass.gb_help;
        private void FormRptArtist_Load(object sender, EventArgs e)
            TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
            TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
            ConnectionInfo crConnectionInfo = new ConnectionInfo();
            Tables CrTables;
            bool repeat = true;
            while (repeat)
                try
                    crConnectionInfo.ServerName = Properties.Settings.Default.CrystalServer;
                    crConnectionInfo.DatabaseName = Properties.Settings.Default.CrystalDatabase;
                    crConnectionInfo.IntegratedSecurity = true;
                    CrTables = crReportDocument.Database.Tables;
                    foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
                        crtableLogoninfo = CrTable.LogOnInfo;
                        crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                        CrTable.ApplyLogOnInfo(crtableLogoninfo);
                    crystalReportViewer1.ReportSource = crReportDocument;
                    crystalReportViewer1.Refresh();
                    break;
                catch (Exception exp)
                    MessageBox.Show(exp.Message);
                    DialogResult result1 = MessageBox.Show("Try Again?", "Database Connection Error",
                        MessageBoxButtons.RetryCancel);
                    if (result1 == DialogResult.Retry)
                        FormCrystalParms newWindow = new FormCrystalParms();
                        newWindow.ShowDialog();
                    else
                        repeat = false;
        private void CrystalReport11_InitReport(object sender, EventArgs e)
        private void btnHelp_Click(object sender, EventArgs e)
            GlobalClass.displayflashhelp(this, "formrptartist");
        private void crystalReportViewer1_Load(object sender, EventArgs e)

Invalid file path when building

Okay so I try to build a DVD folder and once it gets to the "opening project" part I get an error message that says "invalid file path". I'm going to try and burn it later once I get a chance, just wondering if anyone has any insights before I try.
Any help would be great, thanks.

Ben,
Glad to say (for me), that I have not seen these two errors. Doesn't help you, but I do have one thought. "Invalid File Path," indicates that Encore could not find the path specified. In searching for a solution to that error, I'd check to see if the path, that you designated, exists, exists in the exact spelling that you specify, and that it is available - not on an external that is powered down, not on a network, etc.. Check your spelling religiously. Check your "\'s" your "/'s" and everything about the path. Check in Explorer that the two match, and that that path is available. Put it on an internal HDD and make sure that it is not open in any other program. As a test, Copy a file to it. Open that file. If all goes well, then Delete that test file, before you Export to that folder.
It's probably a matter of dotting the "i's" and crossing the "t's."
Hunt

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

Invalid file path

After upgrading to encore 2 i uninstalled 1.5 and now there is one project I cant open. Every time I get the error message "invalid file path" and then an exit to the Encore startup menu.
I can see the Encore projet folders with all the files in and nothing seems altered.
Any suggestions?
-Jesper

Great!
>BTW, 2.0 & 1.5 can coexist happily on your system.
Just to further clarify that statement, note that although this statement is true, Encore 2.0 projects can't be opened in Encore 1.5. Other than that, happy coexistence. :)

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

If it is the first CS version then you will need to check out the following. I believe it applies to CS as well even though it specifies CS2....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Internet Explorer Unsupported video type or invalid file path? HTML 5

Hello.
First I would like to salute all you people out there that answer questions in these forums. Thank you! They have been more helpful than my Web Design class.
Here is my problem. I cannot get Internet Explorer to play my video files. It says Unsupported video type or invalid file path. I have added the .htaccess file for MIME types, and included .mp4, .ogg, and .webm. I have also included a smaller resolution for mobile. Any help or pointers would be appreciated.
Also if anybody could explain to me in an idiot proof way how to add flash support step by step for this site that would be great. I have searched all over the internet, read many tutorials, used the free code makers, and I still cannot get flash to work.
This is my first website, please go easy on me!
Site address is www.mindtrickvp.com
Thanks everybody

This is not proper HTML syntax: Divs must be inside the <body> tag.
</head>
<div id="contactdiv"><a href="Contact.html"><img src="Images/CONTACTWEB.png" alt="" width="300" height="50" id="contact"/></a></div>
<div id="logodiv"><a href="index.html"><img src="Images/LOGO550x210retry.png" alt="" width="550" height="210" id="logo"/></a></div>
<div id="MOTIONGRAPHICSTEXT"><a href="Motion Graphics.html"><img src="Images/MOTION-GRAPHICS.png" width="410" height="50" alt=""/></a></div>
<div id="COMMERCIALSTEXT"><img src="Images/COMMERCIALS.png" width="410" height="45" alt=""/></div>
<div id="WEDDINGTEXT"><img src="Images/WEDDINGS.png" alt="" width="300" height="45"/></div>
<body>
=====================
Replace what you have with this:
</head>
<body>
<div id="contactdiv"><a href="Contact.html"><img src="Images/CONTACTWEB.png" alt="" width="300" height="50" id="contact"/></a></div>
<div id="logodiv"><a href="index.html"><img src="Images/LOGO550x210retry.png" alt="" width="550" height="210" id="logo"/></a></div>
<div id="MOTIONGRAPHICSTEXT"><a href="Motion Graphics.html"><img src="Images/MOTION-GRAPHICS.png" width="410" height="50" alt=""/></a></div>
<div id="COMMERCIALSTEXT"><img src="Images/COMMERCIALS.png" width="410" height="45" alt=""/></div>
<div id="WEDDINGTEXT"><img src="Images/WEDDINGS.png" alt="" width="300" height="45"/></div>
<p id="WELCOMETO"> Welcome to MindTrick Video Productions</p>
<p id="WEOFFER">
We offer high quality video production including but not limited to<BR> Commercial, Training, Wedding, Documentary, and How-To videos.<BR> We also do motion graphics.<BR> We would love for you to be our next client! <BR>Contact us now for further information.</p>
<a href="mailto:[email protected]" id="EMAIL">[email protected]</a>
<a href="tel:+16158012005" id="PHONE">(615) 801-2005</a>
</body>
</html>
Nancy O.

Ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

Invalid docx file format error when publishing

Good morning all,
I've been using UPK 3.5.1 Developer for years with Office 2003 (yes, I know we should upgrade, but that's out of my control), and have successfully published many times. After my latest publishing, the following error showed in the Activity Log:
Task: Job Aid / Postprocessing document
Comment: Invalid docx file format odpub://int/PlayerPackage/Temp/03d444ee-681b-406b-aba2-cd4b669702e2_JOBAID.docx
All of the other job aids have published to a .doc format, so I'm not sure why this one is behaving differently. I located the offending topic, and in UPK, the preview provides a similar error when I try to preview the job aid. Strangely enough though, in the published project, the job aid for that topic prints just fine. I know I can just ignore the error since the finished product works, but I'm just wondering if anyone has some insight as to why this error occurred.
Thanks!
Brenda Hutch

I am having the same issue. It is during export - almost immediately after exporting begins. No file is created.

Invalid Directory Path Error

Hi Guys i am executing the following commands to create a directory and to put a file in the newly created directory, it is givig error of invalid directory path.
create directory dir_output as 'D:\Ora_Applications\'
grant read, write on directory dir_output to public
create or replace procedure Write_to_File
IS
f utl_file.file_type;
begin
f := utl_file.fopen('dir_output', 'something.txt', 'w');
utl_file.put_line(f, 'line one: some text');
utl_file.put_line(f, 'line two: more text');
utl_file.fclose(f);
end;
when i execute the procedure it gives the following error:
ERROR at line 1:
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 18
ORA-06512: at "SYS.UTL_FILE", line 424
ORA-06512: at "SCOTT.WRITE_TO_FILE", line 5
ORA-06512: at line 1
Please help me out of it.
Regards,
Imran Baig

f := utl_file.fopen('dir_output', 'something.txt', 'w');Directory name must be uppercase. Try
f := utl_file.fopen('DIR_OUTPUT', 'something.txt', 'w');

Compiling Media gives a Device ERROR at 99% in PE 11

I have a 3 hr on my time line and am trying to burn a Blue Ray. It is compiling and at 99% it gives a Device ERROR. The original video was shot on a Canon DSLR camera. My burner is a LG and is external USB 3.0. My OS is Win7 64 Bit and have nVidia card and Intel i7 procesor with 32 GB ram in an ASUS motherboard. I have all the latest drivers for my hardware. The BlueRay disk is 25 GB - Memorex brand. I tried to switch to RiData and same issue. Can you please Help. Thanks in advance.

Below is a copy of a message I sent to Adobe
I am using windows 7 64 bit professional. Lenovo T530 with 8 processors. 115 GB free on Hard drive
My pre11 program will not burn an avchd project to a folder. I have been working with this for 6 days now and I can’t get it to work. I have a project that has 38 m2ts clips from my camera which is about 15 minutes. The clips total about 2.6 GB
I can put all 38 clips into my project and if I don’t do anything to them I can burn the project to avdhd to a 4.7GB folder with no problem. The resulting stream files amount to about 2 GB
I can then add a fade in to the first clip and a fade out to the last clip and then a default cross dissolve transition between each clip in the timeline. Then I can successfully burn that to a 4.7 GB folder.
Then I can make three cuts (one simply deleting one clip and another 2 cutting out parts of two clips). Then I can successfully burn that project.
Then I make about 10 more cuts. When I try to burn this if first goes through the “encoding media” stage and then the “compiling media” stage and then as soon as it starts burning, I get the message “device error and the computer locks up.
I need to know how to fix this.
I checked the timeline and there are no gaps and there is no menu.
Cliff

Invalid File Id Error

Hello,
I am using shell script to run a set of sql scripts againts a 9.2 db.
When the script tries to write a file to a specified location it gives the following error,
DECLARE
ERROR at line 1:
ORA-29282: invalid file ID
ORA-06512: at "SYS.UTL_FILE", line 714
ORA-06512: at line 395
ORA-29280: invalid directory path
But if I run the same set of queries in a different box it runs successfully with now issues. We have verified that both versions of Oracle and AIX are one and the same. the directories to which it is trying to write has the same permissions too. Also did a comparison of the objects and didn't see any difference.
Any help in this regard would be greatly appreciated.
Thanks,
Jubil

set serveroutput on size 10000
define_editor=vi
define home_directory = '/scripts/db/loadstage/';
DECLARE
-- Declare Variables
v_err_msg varchar(4000) := '';
output_file UTL_FILE.FILE_TYPE;
output_dir VARCHAR(255) := '&home_directory';
output_log_file VARCHAR(50) := 'data-FKCONFLICT.' || to_char(sysdate,'MM') || '.' || to_char(sysdate,'DD') || '.' ||
                         to_char(sysdate,'YY') || '.log';
v_table varchar(30);
--Open directory file to write log
output_file := UTL_FILE.FOPEN(output_dir, output_log_file, 'w');
UTL_FILE.PUT_LINE(output_file,'PRODUCT-TRADE REFERENCE:');
v_table := 'TEMP_PRODUCT';
FOR r_fk_delete_prod_trade IN c_fk_delete_prod_trade LOOP
     --Delete Records from Staging Table into Production Table
          UTL_FILE.PUT_LINE(output_file,'Deleting from '|| v_table || ': ' ||
     r_fk_delete_prod_trade.res_trade_id);
     DELETE temp_product
     WHERE res_trade_id = r_fk_delete_prod_trade.res_trade_id or
          (res_trade_id is null and r_fk_delete_prod_trade.res_trade_id is null );
DBMS_OUTPUT.PUT_LINE(r_fk_delete_prod_trade.res_trade_id);
     UTL_FILE.PUT_LINE(output_file,'Deleted from '|| v_table || ': ' ||
     r_fk_delete_prod_trade.res_trade_id);
IF SQL%NOTFOUND THEN
          RAISE_APPLICATION_ERROR(-20001, 'Error Deleting FK Conflict to: '|| v_table, TRUE);
     END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN ROLLBACK;
     v_err_msg := SQLCODE || ': ' || SQLERRM;
     UTL_FILE.PUT_LINE(output_file,to_char(sysdate, 'MM/DD/YY@HH:MI:SS') || ' - ' || v_err_msg);
END;
EXIT

Compiling Media invalid file path error when buring a DVD

Similar Messages

Maybe you are looking for