Compiling with JRE5

Hello,
I'm currently developing a GUI Java application and trying to allow access to as many users with as many OS systems as possible. So far, only Mac systems cannot run my applet and through the process of finding out what was the reason, it seems that I should recompile my application using JRE5 instead of JRE6.
However, I'm not sure how to do that. Do I have to uninstall JRE6 and reinstall JRE5? Or is there a better way?
Thanks,
LD

You can configure Java 6's compiler to output code that is acceptable to Java 5 (and other versions.) The documentation for the javac tool explains how.

Similar Messages

How to find out which PL/SQL Proc is Compiled with Debug?

Hi,
is there any View where i can see, which PL/SQL Proc is compiled with the debug flag?
Thanks
Marco
Message was edited by:
mpatzwah

Alternatively:
select name, plsql_debug from sys.all_plsql_object_settings

SUNWspro iostream error while compiling with SunStudio 10

We are getting the following error when we try to compile the C++ code using SunStudio 10 on Sun Solaris Sparc server.
We made couple of changes in the source code 1) whereever we have stream.h we replaced it with iostream.h and 2) include fstream.h whereever required.
Can anyone tell us where did it go wrong.
+ /opt/SUNWspro/bin/CC -g -O -DHAWK -mt -lclntsh -lsocket -lnsl -I/export/home/StandardComponents/SC/include -I../../mylib -I../../include -I/opt/SUNWspro/prod/include/CC/Cstd -I. -I- -D_TRACE_ -c collectDborMtoInfo.c
"/opt/SUNWspro/prod/include/CC/Cstd/iostream.h", line 20: Error: Use ";" to terminate declarations.
"/opt/SUNWspro/prod/include/CC/Cstd/iostream.h", line 20: Error: A declaration was expected instead of "'\n'".
"/opt/SUNWspro/prod/include/CC/Cstd/iostream.h", line 20: Error: Use ";" to terminate declarations.
"/opt/SUNWspro/prod/include/CC/Cstd/iostream.h", line 20: Error: A declaration was expected instead of "'\n'".
4 Error(s) detected.

Remove the -I directive that points into the compiler installation. You should not have have -I or -L options that point into the compiler installation area, into /usr/include, or into /usr/lib. The CC compiler driver knows where to find system headers and libraries, and in what order to search the directories. If you force a different search order, you can break something.
If removing -I/opt/SUNWspro/prod/include/CC/Cstd does not fix the problem, compiling with -P or -E will show you the preprocessor output, and looking at the lines with the errors will usually show the source of the problem quickly.
BTW, you should be aware that the ".h" form of the C++ headers, like <iostream.h> and <fstream.h>, is not standard. Using them is not portable, because not all C++ implementations provide them, and those that do often have different content.

Critical Error while compiling with AIR16 (*.ipa export)

Hey,
my application crashed while compiling with AIR16. (Flex 4.13.0-AIR 16.0)
With AIR15 it works well.
First I thougt, the reason might be the included ANE, but it isnt. The ANE works fine with another project.
In fact other projects also work with AIR16.
Any ideas?
Error message:
Error occurred while packaging the application:
Undefined symbols for architecture armv7:
"_traits:AOTBuildOutput-0000000101_6:234::Span", referenced from:
      _AOTBuildOutput-0000000101_6:9729:Edge in AOTBuildOutput-0000000101_6.o
"_traits:AOTBuildOutput-0000000101_6:234::Edge", referenced from:
      _AOTBuildOutput-0000000101_6:9706:flashx.textLayout.compose::Parcel/allocateEdge in AOTBuildOutput-0000000101_6.o
"_traits:AOTBuildOutput-0000000100_5:18::LocaleID", referenced from:
      _AOTBuildOutput-0000000100_5:265:mx.resources::LocaleSorter$/sortLocalesByPreference in AOTBuildOutput-0000000100_5.o
ld: symbol(s) not found for architecture armv7
Compilation failed while executing : ld64
EDIT:
I tried it also with Flex 4.14.0-AIR 16.0. Got this message:
Error occurred while packaging the application:
Undefined symbols for architecture armv7:
"_traits:AOTBuildOutput-0000000101_6:248::Span", referenced from:
      _AOTBuildOutput-0000000101_6:11261:Edge in AOTBuildOutput-0000000101_6_1.o
"_traits:AOTBuildOutput-0000000101_6:248::Edge", referenced from:
      _AOTBuildOutput-0000000101_6:11238:flashx.textLayout.compose::Parcel/allocateEdge in AOTBuildOutput-0000000101_6_1.o
"_traits:AOTBuildOutput-0000000101_6:207::CellCoords", referenced from:
      _AOTBuildOutput-0000000101_6:8073:flashx.textLayout.elements::TableElement/normalizeCells in AOTBuildOutput-0000000101_6.o
      _AOTBuildOutput-0000000101_6:8072:flashx.textLayout.elements::TableElement/getBlockedCoor ds in AOTBuildOutput-0000000101_6.o
"_traits:AOTBuildOutput-0000000100_5:18::LocaleID", referenced from:
      _AOTBuildOutput-0000000100_5:340:mx.resources::LocaleSorter$/sortLocalesByPreference in AOTBuildOutput-0000000100_5.o
ld: symbol(s) not found for architecture armv7
Compilation failed while executing : ld64

We've built a lot of test-apps including the same components and libraries as in this app, but we are not able to reproduce this crash in other projects.
The project works fine in the Simulator without any crashes or compile errors!

PCC-S-02014 error while compiling with in Sun Solaris

We are porting our application from HP-UX to Sun Solaris and as part of that I am trying the compile a Pro*C program in Sun Solaris using SUNWspro C++ compiler. Precompiling is failing with following error.
PRECOMP set: /u01/app/oracle/product/10.2.0/bin/proc dbms=native code=cpp mode=ansi include=/u01/app/oracle/product/10.2.0/precomp
ireclen=255 oreclen=255
define=__sparc define=__SUNPRO_C include=/usr/include include=. include=/u01/app/SUNWspro/prod/include/CC/stlport4 include=/u01/app/oracle/product/10.2.0/rdbms/public/ include=/u01/app/oracle/product/10.2.0/network/public/ include=/u01/app/oracle/product/10.2.0/rdbms/demo/ errors=yes select_error=no
sqlcheck=limited ltype=NONE
release_cursor=no hold_cursor=no
Pro*C/C++: Release 10.2.0.3.0 - Production on Thu Dec 18 03:09:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /u01/app/oracle/product/10.2.0/precomp/admin/pcscfg.cfg
Syntax error at line 44, column 30, file /u01/app/SUNWspro/prod/include/CC/stlport4/algorithm:
Error at line 44, column 30 in file /u01/app/SUNWspro/prod/include/CC/stlport4/a
lgorithm
# include STLPNATIVE_HEADER(algorithm)
.............................1
PCC-S-02014, Encountered the symbol "(" when expecting one of the following:
: [ ] + / . .. an identifier, a numeric constant, newline,
define, elif, else, endif, error, if, ifdef, ifndef, include,
line, pragma, undef, exec, sql, begin, end, var, type,
oracle, an immediate preprocessor command, a C token, create,
function, package, procedure, trigger, or, replace,
Normal C++ files are getting compiled with out eny issues. This particular file is having functions written in C fashion. Any idea what is missing in the compiler option.
regards
Vinu

Hi Vinu,
I'm not sure if this is still an issue for you. When I have encountered issues like this with Pro*C I have ended up specifying parse=none to the proc command and then putting all declarations between "EXEC SQL BEGIN DECLARE SECTION" and "EXEC SQL END DECLARE SECTION" markers. I have also moved any "special" declarations into a specific header file and then placed the "#include <special header file>" inside the declare section as well.
Perhaps that will help a bit,
Regards,
Mark

What is better?: Compiling with newest WTK or oldest WTK

HI:
I have installed the WTK 2.5. It's cool but I have a question. The MIDlets compiled with this new WTK are more or less compatible with older/newer phones?
If I compile a MIDlet with this WTK instead a older WTK (like WTK 2.0) Executes the code more quickly? Using less memory?
Thanks!!

Comments inlined:
I have installed the WTK 2.5. It's cool but I have a
question. The MIDlets compiled with this new WTK are
more or less compatible with older/newer phones?It is always better to use the new wireless tool kits since, the oler emulator related bugs would have been eliminated from the providers. Also, most of the toolkits are backward compatible.
If I compile a MIDlet with this WTK instead a older
WTK (like WTK 2.0) Executes the code more quickly?
Using less memory?May be on the desktop environment you'll feel that difference since, new toolkits would have been optimized for performance but it is better to determine the behaviour on device (or) set the heap configurations based on the device in the emulator and check.
Compiled byte codes remains the same whether you compile with toolkit 2.0/2.5.
~Mohan

JDK 1.6 update n and compile with JRE

With the new optimizations of the install of a JRE with java 6 update n, is it possible to compile with jre and just the parts of the jre that you need for your application? That is can we distribute a java application that only have the parts of the JRE that it needs to a user that do not have any JRE isntalled and he can run it?
Thanks
WildChild

The license of Sun does not allow you to distribute just part of the JVM. The only solution to run your application in a computer without JVM is bundle your whole JRE folder together with your application.
At first it sounds bad, but if you use an installer to compress your files, the JRE will be around 14mb.
Check this tool

Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, don´t work with UCCX 10.5

I have a Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, after upgrade it don´t work with UCCX 10.5
I get the error message: "Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL.; nested exception is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. (line: 1, col: 47)
Does anyone know about this ?

Did you ever find a resolution to this issue? I have a similar issue after upgrading from 7 to 10.5. I have loaded all provided certificates to the tomcat-trust store, restarted Tomcat Services and still get the same error
Thanks

Java 6u24 won't launch signed JNLP app with classes compiled with JDK 1.4.2

Anyone else having a problem launching a JNLP app compiled with Java 1.4 using Java 6u24 on the client? Anyone have a Java 1.4-compiled app that does launch with Java 6u24?
I am, and I have isolated the problem to some change in 6u24's java web start launching logic. The splash screen appears and then javaws just quits with no error. Trace shows it is not getting past checking of the first .jar. My JNLP app, fully signed with CA-issued certificate, when compiled with Java 1.4.2 will not launch on JRE 6u24 (or 6u25-b03). The same exact app launches perfectly fine when it is compiled with JDK 1.5 or 1.6. It is not a signing problem, though it is related to certificate checking logic or a concurrency flaw in javaws' AppPolicy and TrustDecider classes. It is not a host server or network problem as those have been varied with same results. It is not a specific .jar problem as I have varied what is the first .jar with same results. I have eliminated all other variables to find the only difference is what Java version the app is compiled with. Well, all but one other variable - I have not tried with apps other than mine.
My app is compiled with JDK 1.4.2 so I can still support older platforms. That requirement is going away soon but this is still a regression from 6u23 that is causing a big problem for at least this developer.

You can try to use the version of the jarsigner JDK 1.5 or later.
Has changed the management of files in META-INF.
So compile with 1.4 but sign with 1.5 or later

Help!Apache compiling with gcc in Solaris 10

Greetings
I am having problems with Apache 1.3.
When I am running the script ./src/Configure my output is:
#./Configure
Using config file: Configuration
Creating Makefile
+ configured for Solaris 2100 platform
+ setting C pre-processor to gcc -E
+ using "tr [a-z] [A-Z]" to uppercase
+ checking for system header files
+ adding selected modules
./helpers/TestCompile: make: not found
+ using builtin Expat
./Configure: make: not found
+ checking sizeof various data types
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
+ doing sanity check on compiler and options
./helpers/TestCompile: make: not found
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
Aborting!
I am root, my PATH is
/usr/bin:/usr/ucb:/etc:/usr/local/bin:/opt/netscape:/usr/css/bin/:/bin:/usr/openwin/bin:/usr/sbin:/
I am missing something stupid, I know but I can't find it!!!!Help please I am a newbie.
I am curious. Has anyone been able to compile succesfully apache server with gcc in Solaris 10?
Thanks,

Thanks,
It was only that.!!!
But now I have the following problem, I can't create executables when I type make. The output is:
when I am in the src/folder
#make
===> regex
<=== regex
===> os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> $i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== $i"; \
done
make: Fatal error: Command failed for target `subdirs'
but when I am typing one step up is.
===> src
===> src/regex
<=== src/regex
===> src/os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> src/$i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== src/$i"; \
done
make: Fatal error: Command failed for target `subdirs'
Current working directory /web-download/apache_1.3.33/src
*** Error code 1
The following command caused the error:
case "xi86pc-sun-solaris2.2100" in \
x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
esac; \
cd ./src; make SDP=src/ all
make: Fatal error: Command failed for target `build-std'
Current working directory /web-download/apache_1.3.33
*** Error code 1
The following command caused the error:
make -f ./Makefile root= build-std
make: Fatal error: Command failed for target `build'
I am newbie with Solaris and gcc so I have no so much idea what is missing there.
Thanks,
Juan

Data not visible in table o/p when compiled with webdynpro compiler

Hi,
I am using a Z BAPI to retrieve data from backend ECC6 server and show it using a VC application.
When I compile this VC application using FLASH(FLEX2), the data is shown in the table, whilst if the VC application is compiled using Webdynpro compiler, the data is not shown in the table.
The No. Of Rows parameter has been updated with 10.
Please suggest what can be done so that data is shown when compiled with Webdynpro compiler.
Regards,
Ranu

Hi Ranu,
WebDynpro Compiler only supports Webservices.
You can look at the below link to get into full details -
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/limitationsofWeb+Dynpro
Regards,
Vipin Vijayan.

PL/SQL will compile with warnings but will not run

I have a pl/sql package that will compile with warnings but no errors but when i try to run it I get an ORA-6508 error telling me there is an error somewhere in the package but I can't find it.
I have two user schemas that use 2 slightly different versions of the package. I had to make slight code changes to one of the versions and when I made those changes it stopped running. The second version compiles and runs correctly.
After going through a line by line comparison the first copy was still not running. I copied the second version of the code into the broken schema and commented out the additional lines of code that are not needed in this version.
When I tried to compile and run this version it still fails with the same error.
I am using Oracle XE and the databases are small.
I can send on the code if necessary.
Can anyone point me in the right direction?
Thanks
Susan

I tried doing what you suggested but there are no errors as it is compiling correctly.
It is only when I run the package through the debugger that I get the error. I have posted it below
Connecting to the database Hess S3.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', '2086' )
Debugger accepted connection from database on port 2086.
Processing 59 classes that have already been prepared...
Finished processing prepared classes.
Exception breakpoint occurred at line 10 of BnmSkOTQ3jz5I52ZOxC4QNw.pls.
$Oracle.EXCEPTION_ORA_6508:
ORA-04063: package body "SHIPPING.LIFTINGSCHEDULE" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SHIPPING.LIFTINGSCHEDULE"
ORA-06512: at line 10
Process exited.
Disconnecting from the database Hess S3.
Debugger disconnected from database.
Regards
susan

Regarding Automation Of The iOS App Compiled With Enterprise Program

Hi,
We have to automate the iOS app, compiled with `Enterprise Developer Account` build in `Adobe Flash Builder Environment`. We have checked the provision profile attached with the IPA file and the value of `getTaskAllow` is set to `False`, so it seems that the app is build with `Distribution Profile`.
As the app is developed from Enterprise Developer Account, so we are able to install and run the app in real device, but `Appium` as well as `Instruments` is unable to debug it and showing an error "Permission to debug <BUNDLE ID OF APP> was denied. The App must be signed with a development identity (e.g iOS Developer)".
So, is it necessary to build the app with `Developer Provisioning Profile` and mentioning the UDID of the device in the Development Provisioning Profile, so as to debug the app via `Appium` or `Instruments` ?

Yes. I can export Distribution certificates and Distrubution provisioning files and Flash will then export the .ipa file without issue. However when I go to install the app it seems to go over to the iPad and then I get a failure notice on the iPad. I am wondering if I am installing it incorrectly or if there is some step I'm missing. I am dragging the .ipa to iTunes to install it. If I export both the cert and the provisioning files as Development files the app goes on the iPad without issue, however it will expire in a couple of months so that is not what I want. I recently found this link http://www.adobe.com/devnet/digitalpublishingsuite/articles/distributing-enterprise-ios-vi ewer-apps.html which leads me to believe I have to distrubute the .ipa differently, however I was hoping someone had seen a similar tutorial for a Flash ipa. Or is this similar (or exactly) what I need to do?
Thanks so much for the reply.

Pragma error when compiling with SDK X

Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
Magda

Without seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

Compiling with Windows XP

I've just installed J2SE 1.4.0 and am having problems with the classpath. I've tried setting it as explained in the Help section on the java.sun site, however I still get the error message:
'javac' is not recognised as an internal or external command, operational program or batch file
How exactly should I go about setting the classpath and what is the format that it should take?

I have a same proplem when compiling with Windows XP.
I set
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32
Wbem;C:\j2sdk1.4.0_01\bin.Could you please tell me
more about this problem. Thanks a alot!Open a console window.
Type the following command
set
Verify that the PATH looks like what you think it does. If it doesn't fix it.
Then do this
cd C:\j2sdk1.4.0_01\bin
set PATH=.
javac -?
If you still get the same error then something is wrong with the install. Examine the bin directory. There should be a number of exe files in it including javac.

Compiling with JRE5

Similar Messages

Maybe you are looking for