Compiz and weird window placement
I just installed Arch and KDE. It all works fine except for compiz, which works, but any window opened goes to the top left hand corner and the title bar is hidden so I can't even move it.
Start the CompizConfigSettingsManager (ccsm) and check if the window decorator plugin is enabled if you have no window boarders.
There is another plugin for windows placement (don't know how its called because my settings manager is in german).
Maybe you have to active a lot of other plugins before compiz works how you like it.
Similar Messages
-
Dark blue background and weird icon placement on jump list (recent files) of apps in task bar
Hi, I recently made a factory reset of W8.1, and now I'm seeing a weird and very annoying dark blue backgound in the list of recent files that appears when you right click an app pinned to the taskbar. Also, the "pin to taskbar" and "close window" icons show sort of out of place and apparently larger than normal I've tried looking through every possible setting but I can't find anything related to this list in particular. Any ideas?
Thanks in advanced.MechPilot wrote:
Hello @Adrianrff, I understand that a dark blue background and strange icon placement on the jump list of apps in the task bar of your computer, and I would be happy to assist you in this matter! Since this issue occurred after performing a factory reset, I suggest performing a full system recovery by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return the jump list and icon sizes back to factory settings.
If the issue continues, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards Thanks for the suggestion, MechPilot. I did a full system recovery but unfortunately it did not work. Apparently the color of the background matches the color chosen in Windows first startup, but I don't remember having chosen white the first time, everything looked fine then. Any other suggestion? -
I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
LoredanoThese are the options you have.
Budget $1299.
http://www.apple.com/macbookair/
http://www.apple.com/macbookpro/
Best. -
In 3.6.16, the buttons are all over the place. In previous versions, the forward, back, refresh, stop and home buttons were all together. In this version, the refresh and stop buttons are between the address and search windows, and the home button to the far right.
I would love to have them all together as they used to be - much more user friendly that way. I have tried installing alternate themes, but the coding of this version over-rides the themes.Firefox 4.0 has a combined Reload and Stop and Go button that appears at the right end of the location bar.
To restore the Firefox 3 appearance you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Move the Reload and Stop buttons to their previous position at the left side of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons. -
The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!
Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck! -
Sometimes, after its been going quite a long time. a Firefox window top bar goes weird, and the window controls at extreme top right disappear, making it impossible to resize or close the window. The only solution I have found is to individually move the tabs to a new window. The original (bad) one then disappears as soon as the final tab is shifted.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
Firefox stops responding and causes Windows to stop responding also
Sorry if this is vague; I just wrote a very, very detailed post on my issues but then the site decided that I didn't have permission to post it and erased everything.
My problem is that Firefox freezes and causes Windows to freeze for a while also. after a few minutes it goes away, but today I got the following error message:
"AdapterDeviceID: 0x679a
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:29.0.1,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.3
AvailablePageFile: 8932384768
AvailablePhysicalMemory: 7403167744
AvailableVirtualMemory: 2997309440
BIOS_Manufacturer: American Megatrends Inc.
BlockedDllList:
BreakpadReserveAddress: 48037888
BreakpadReserveSize: 37748736
BuildID: 20140506152807
CrashTime: 1402766616
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1402339725
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x679a, AdapterSubsysID: 6616103c, AdapterDriverVersion: 14.100.0.0
D2D? D2D+ DWrite? DWrite+ D3D10 Layers? D3D10 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1402758510
SystemMemoryUsePercentage: 30
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 4294836224
URL: http://www.newegg.com/Product/Produc...D=3938566&SID=
Vendor: Mozilla
Version: 29.0.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed."
I noticed the file "mswsock.dll" mentioned so I looked for issues with it. Apparently there are issues with malware and Firefox and that file. I have scanned and it found nothing, plus this issue has existed in three formats of my drive and windows re-installs (for other reasons, I didn't format and re-install just to make sure there was no malware) so I'm pretty sure there are no problems with malware.
I am running a Minecraft server and I have a static IP set up, but I've been doing this for three years without issues so I don't think that's the issue either.
I have tried disabling all plugins. Still crashes and crashes Windows with it.
I have run Memtest86+ and the windows memory tester. Not a memory issue.
Here's my troubleshooter info: {
"application": {
"name": "Firefox",
"version": "29.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.3; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0",
"supportURL": "https://support.mozilla.org/1/firefox/29.0.1/WINNT/en-US/"
"crashes": {
"submitted": [
"id": "bp-588b7adc-28fd-43ab-bc02-91dda2140614",
"date": 1402766691156,
"pending": false
"pending": 0
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.places.smartBookmarksVersion": 6,
"browser.sessionstore.upgradeBackup.latestBuildID": "20140506152807",
"browser.startup.homepage_override.mstone": "29.0.1",
"browser.startup.homepage": "http://scratch.mit.edu/|http://lotro-wiki.com/|http://localhost:8080/",
"browser.startup.homepage_override.buildID": "20140506152807",
"browser.tabs.warnOnClose": false,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "29.0.1",
"font.internaluseonly.changed": true,
"gfx.direct3d.last_used_feature_level_idx": 0,
"network.cookie.prefsMigrated": true,
"places.database.lastMaintenance": 1402771877,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.importedState": true,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"privacy.sanitize.migrateFx3Prefs": true,
"storage.vacuum.last.places.sqlite": 1402344545,
"storage.vacuum.last.index": 1
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 10",
"windowLayerManagerRemote": false,
"adapterDescription": "AMD Radeon HD 7900 Series",
"adapterVendorID": "0x1002",
"adapterDeviceID": "0x679a",
"adapterRAM": "3072",
"adapterDrivers": "aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64",
"driverVersion": "14.100.0.0",
"driverDate": "4-17-2014",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.3.9600.17111",
"webglRenderer": "Google Inc. -- ANGLE (AMD Radeon HD 7900 Series Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.3",
"version": "4.10.3"
"NSS": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSUTIL": {
"minVersion": "3.16",
"version": "3.16"
"NSSSSL": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSSMIME": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Adblock Plus",
"version": "2.6.3",
"isActive": true,
"id": "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}"
"name": "Troubleshooter",
"version": "1.1a",
"isActive": true,
"id": "[email protected]"
Like I said before, sorry if this is vague. Let me know if you need more info and hopefully I'll be less impatient with this site then.
I'm running Windows 8.1 64 bit. My full specs are here: https://pcpartpicker.com/b/FfJxFT (I've upgraded to Windows 8 and replaced the dead hard drive now. My new drives are a 120Gb Samsung 840 EVO and a 1TB Seagate Barracuda).
Thanks.'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart -
Seemingly, every time I have to force quit a program or if a program crashes, a weird window can be seen in my Dock.
It's hard to explain, so here is a picture:
http://idisk.mac.com/km23-Public/?view=web
You can see an outline at the bottom left up to where the bottom of the icons start. Any ideas regarding why this happens or what this could be?What are we looking at BigD? Your link doesn't show your Dock.
When you say "every time I have to force quit a program or if a program crashes" that sounds like you have deeper problems, though possibly connected.
FYI, I have had to force quit no than a handful of times in several years, so you need to get to the root of this problem first, and be less worried about the related ghosting remnant in the Dock.
What application is crashing most often? -
My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed? -
Resized partition using Disk Utility and now Windows 7 will not boot
Hi,
Hopefully someone can help me!!
I had previously used Boot Camp to install Windows 7. However, I later realised I had not given myself anywhere near enough disk space as I started using Windows for things I hadn't originally planned on using it for.
Anyway, long story short, to solve the problem I uninstalled some applications on my Mac OSX and used Disk Utility to decrease the size of my Mac partition. My plan was then to reboot to Windows and use a Windows application to increase the size of the Windows partition. However - I coudln't even get that far.
Upon decreasing the size of my Mac partition (succesfully) I restarted my Mac in order to boot to Windows. However, I was greeted with a message along the lines of "unable to boot to Windows please insert boot disk and press any key" (I can't remember the exact message).
I was wondering if anyone knows of any way to restore my Windows partition, retaining all of my previously saved files on my Windows disk. It's probably a long shot, but the thought of losing everything I have been working on for the last few months is a sickening one.
What does give me a bit of hope is that, if I click Boot Camp it seems to recognise that Windows 7 is installed as the option that appears is to uninstall it.
Furthermore, if I view partitions in Disk Utility, a "DISK0S4" is listed. However, it's only at 20gb - if this WAS my BootCamp partition previously, it was originally at something around 60gb (I think - either way, definitely bigger than 20gb!).
On top of this, my current Macintosh HD parition is at 260gb and with the DISK0S4 partition at 20.21gb, there seems to be some space missing... I'm hoping this is the files I've been working on over the last few months!
Anyway, I've done some searching on the net and it *seems* that GPT fdisk *might* be my savour. I've downloaded it but have no idea how to use it and don't plan on playing about with it as I could no doubt do some real damage. If it is likely to solve my problem however, I'm certainly more than capable of being walked through what I need to do.
Please help!Hi Christopher,
I also have problems with Windows rebooting after partition resize trying to reduce Mac side and increase Windows side. I do not see the BootCamp partition labelled as such while running disk utility. The Windows partition shows up when I boot up while pressing the ALT key. However, when I try to run Windows, it says " error loading operatig system".
I also followed instruction and went through to run gdisk successfully. Results towards the end.
What can be done? Windows still does not boot and It shows ? Suspicious MBR at sector 0.
Below is information based on typical questions you ask.
diskutil list
/dev/disk0 #: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 78.5 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data 31.7 GB disk0s4
sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=120034123776; sectorsize=512; blocks=234441648
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 234441647
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 153240016 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
153649656 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
154919200 17628896
172548096 61892608 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
234440704 911
234441615 32 Sec GPT table
234441647 1 Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14593/255/63 [234441648 sectors]Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 1023 254 63 [ 1 - 172548095] <Unknown ID>
*2: 07 1023 254 63 - 1023 254 63 [ 172548096 - 61892608] HPFS/QNX/AUX
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.7
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #4 (MBR partition #2)
Enter an MBR hex code (default 07):
Set the bootable flag? (Y/N): y
Unused partition space(s) found. Use one to protect more partitions? (Y/N): n
Recovery/transformation command (? for help): o
Disk size is 234441648 sectors (111.8 GiB)
MBR disk identifier: "DELETED INFO"
MBR partitions:
Number Boot Start Sector End Sector Status Code
1 1 172548095 primary 0xEE
2 * 172548096 234440703 primary 0x07
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk2.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully. -
Windows not showing. Page source and library windows open but not showing.
I select View --> Page Source and no window appears. Under the Window menu, the item Source: . . . shows but no window. If I close the main window then the item is ticked but still no actual window.
I have disable all extensions and plugins, safe mode, revert all preferences.
the same happens with Show all Bookmarks. This is why I posted this under bookmarks problems originally - see below.
I now find the same happens to downloads and Error console windows. No problems in Safari or MS Word (usually the worst performer)
Bookmarks are all present, but show all bookmarks produces no window, even though the window menu shows an item and I can select it.
Mac OS 10.6.8 FF 5.01 Show all bookmarks shows no window, even if I close the main window. Under window menu the 'Library' item is ticked but still nothing. I have restarted, and renamed places database. recently installed some of these addonsThe one that solved it was my own last post, which does not have a Solved it.
I copied the FF profile folder from another login and started with that.
However. . . the problem is back. I installed extensions, NoScript and MyBookmarks and it seemed OK after that.
Then I installed Download Youtube videos + 3.3.51, then DownThemAll! 2.0.7, Google Shortcuts 2.1..6, ImTranslator, QuickWiki and Read It later. No Plugins ennabled.
when I disable all extensions then the windows for downloads, error console and 'open link in new window appear OK, but not the source or Library windows.
As before they are on the window menu but no way to make them visible. -
I used to be able to control new tab actions such as opening on top of current tab or in a new tab. This is frustrating as i always cover up where I am or was! How can this be corrected so I can open a new tab in a new tab? I am enrolled in an on-line class and can not open tabs in a new tab as needed as it always places the new tab on top of teh current or old tab.
Funny as i use to complain about opening in new windows!
I am missing how to control new tabs and new window actions?
THanks,
WilliamDo you have any tab related extensions (Tools > Add-ons > Extensions) that allow to divert links?<br />
See [[Troubleshooting extensions and themes]]
Did you ever made changes to the prefs browser.link.open_newwindow and browser.link.open_newwindow.restriction yourself on the about:config page?
See:
* http://kb.mozillazine.org/browser.link.open_newwindow
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction
See also http://kb.mozillazine.org/about%3Aconfig -
New laptop, some questions (compiz and suspend)
I've just bought a thinkpad t400s and I already love it. I've got two problems anyway...
-The first thing is that I can't start compiz. When I try to run fusion-icon, the system gets incredibly slow and I have to kill x.
Here is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dri"
Load "glx"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "True"
Option "NoDDC" "True"
Option "EnablePageFlip" "True"
Option "RenderAccel" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
- I have installed pm-utils and I can suspend the laptop with sudo pm-suspend.
I have also installed the gnome power manager, but the problem is that the laptop doesn't suspend when I close it.
Thanks in advance,
Francesco
Last edited by katzen (2009-12-01 16:16:51)katzen wrote:
ok, I've activated ms and it starts up, but if I select the compiz window manager windows borders disappear and I have to select metacity again.
I don't really remember how it worked, but if I try to select some effects with the metacity manager nothing changes.
I'll try to search something about handler.sh too.
Thanks a lot for the help!
From the wiki - you have to active 'window decoration':
Activate important plugins!
Before you do anything else, you might want to check if the plugins that provide basic window manager behaviour are activated or you will have no possibility to drag, scale or close windows as soon as compiz is activated. Among those plugins are "Window Decoration" under Effects and "Move Window" & "Resize Window" under Window Management. (ccsm may be used to achieve this.) -
No window decoration with Compiz using gtk-window-decorator
Hello.
I know this is and old problem with Compiz and ArchLinux, but no matter what I do, I can't make it work.
This happens when I try to use Compiz:
$ compiz --replace ccp &
[1] 2370
[user@userlaptop ~]$ Backend : ini
Integration : true
Profile : default
Adding plugins
Initializing core options...done
Initializing decor options...done
Initializing move options...done
Initializing resize options...done
Setting Update "command"
And this, if I try to run Compiz with fusion-icon, with o without the Dbus option:
$ fusion-icon
* Detected Session: gnome
* Searching for installed applications...
Backend : ini
Integration : true
Profile : default
Traceback (most recent call last):
File "/usr/bin/fusion-icon", line 57, in <module>
from FusionIcon.interface import choose_interface
File "/usr/lib/python2.7/site-packages/FusionIcon/interface.py", line 22, in <module>
from util import env
File "/usr/lib/python2.7/site-packages/FusionIcon/util.py", line 421, in <module>
decorators = CompizDecorators(_installed)
File "/usr/lib/python2.7/site-packages/FusionIcon/util.py", line 228, in __init__
self.command = context.Plugins['decoration'].Display['command']
KeyError: 'decoration'
Also, when i try to run compiz-manager, this is what i get:
$ compiz-manager
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
No whitelisted driver found
aborting and using fallback: /usr/bin/metacity
Here is my xorg.cong configuration file:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Option "AIGLX" "true"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "dbe"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "es"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
If I use compiz-check:
$ compiz-check
Gathering information about your system...
Distribution: Arch Linux
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: No rendering method in use (AIGLX, Xgl or Nvidia)
Other considerations:
"Window decorations", "Resize windows" and "Move windows" are checked in ccsm for user and root.
"gtk-window-decorator --replace" is set at the command field in "Window decorations" options.
My kernel version is 2.6.35-ARCH, and the video driver is ATI Catalyst 10.12 with Xorg 1.9.
Everytime I use compiz-manager, Gnome crashes.
Thank you for your time guys, I hope this information helps you to help me out.That's not an option, I don't want to sacrifice video performance for a few effects.
Also, shouldn't be that way, why a distribution like ArchLinux, one of the best, has this kind of problems with Drivers. -
Formating the Mobile Me gallery window place holder
Is there a way to format the Mobile Me gallery window place holders? Specifically, remove the white title bar at the bottom of the window when they appear in the published site?
I would like to ad these galleries but I don't want the title at the bottom to show up. I don't want to use the album style picture placeholders because I want to be able to email the pics.Is it the tell a friend email link that you're referring to? Can you click on the gallery link in iPhoto and get to it online? The link will contain numbers as the folder for the gallery is identified by a 6 digit number.
If it's the link in the email that gets created by the tell a friend that you're referring to you might post in the Mail forum also.
All I can think to do is go to iPhoto/Gallery preference pane and stop publishing. Then republish and see if you can get the email link to work.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.
Maybe you are looking for
-
Dear all, In the third party process, have we to create outbound delivery? I have created PO from PR of a third party sales order. And now, i don't understand to delivery to customer. Pls tell me solution. If we have to create outbound delivery from
-
How can I reset my security questions?
In January 2012, I bought an iPod Touch 4th Generation, and used it about a year and a half. During this time, I got quite a few gift cards from family members, but I never really used the money, even though I redeemed it. Due to some misunderstandin
-
IPod classic not recognized by mac or itunes.... but otherwise works fine.
I'm wondering if there is any way I can save my music. I had to reformat my macbook due to corruption of whole disk encryption. My only copy of my music library was on the iPod itself. I was able to restore about 2/3 of my collection from the iPod to
-
Create one order with reference to multiple quotations
Hi gurus, Is it possible in standard SAP to create one sales order with multiple quotations, or to create one order with reference to multiple orders, if yes what is the procedure. Regards, kishore.
-
HT204150 How do I erase my custom phone labels in my contacts?
Hello. I'm trying to delete the custom labels I've created in my contacts on my 4s. They only allow a certain # of labels. Thank you.