Compiz working slow, google earth crashing ...

Hi. I have this 2 problems.
1. when compiz fusion enabled - it works, but browsing very slow.
2. google earth stop responding after 1 minute.
I think it something with xorg.conf but can't find solution...
glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
Option "AIGLX" "true"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "glx"
Load "dri"
Load "extmod"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Similar Messages

Google-earth crash

Hello
I experiencing the following issue for google-earth 7.1.4.1529-1
1. $ google-earth
[0610/180031:ERROR:net_util.cc(2195)] Not implemented reached in bool net::HaveOnlyLoopbackAddresses()
libGL error: No matching fbConfigs or visuals found
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
libGL error: failed to load driver: swrast
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
[0610/180034:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
Google Earth has caught signal 11.
We apologize for the inconvenience, but Google Earth has crashed.
This is a bug in the program, and should never happen under normal
circumstances. A bug report and debugging data have been written
to this text file:
/home/bobses/.googleearth/crashlogs/crashlog-55785112.txt
Please include this file if you submit a bug report to Google.
2. The crashlog:
Major Version 7
Minor Version 1
Build Number 0004
Build Date Mar 30 2015
Build Time 22:21:27
OS Type 3
OS Major Version 4
OS Minor Version 0
OS Build Version 5
OS Patch Version 0
Crash Signal 11
Crash Time 1433948434
Up Time 5.80954
Stacktrace from glibc:
./libgoogleearth_free.so(+0x1e8d3b)[0xf7352d3b]
./libgoogleearth_free.so(+0x1e8f71)[0xf7352f71]
linux-gate.so.1(__kernel_sigreturn+0x0)[0xf773fbe0]
3. Kernel: x86_64 Linux 4.0.5-1-ARCH + Nvidia GeForce 210
cat /etc/os-release
NAME="Arch Linux"
ID=arch
PRETTY_NAME="Arch Linux"
ANSI_COLOR="0;36"
HOME_URL="https://www.archlinux.org/"
SUPPORT_URL="https://bbs.archlinux.org/"
BUG_REPORT_URL="https://bugs.archlinux.org/"
I found same bug reported recently here: https://code.google.com/p/earth-issues/ … id&id=1826
Any idea? Thanks.

I solved (in part) this issue due to a comment on the page google-earth AUR: https://aur.archlinux.org/packages/goog … mments=all
The comment is (unedited):
"Comment by hutou
2015-04-12 20:08
On Arch64, a standard install from AUR succeeded, but GE crashed on startup (error = "unknown graphic card")
I then recompiled the package with _64=1 : GE did launch, but 2 issues remained : no panoramio and search not working.
The first can be solved by installing the packages freeimage and libpng15, and then recompiling the package google-earth with the variables _64 and _attempt_fix set to 1 in the PKGBUILD.
The second issue is related to the decimal separator of some locales (fr for me), and is easily solved by inserting the line
export LC_NUMERIC=en_US.UTF-8
just before the line
LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH ./googleearth-bin "$@"
in the file /opt/google/earth/free/googleearth
This worked for me : GE works fine, no crashes."
I said that I solved in part because I received only the following error when I run google-earth in terminal (but Google Earth seems to run ok - I didn't do so many tests):
[0610/212239:ERROR:net_util.cc(2195)] Not implemented reached in bool net::HaveOnlyLoopbackAddresses()
[0610/212239:WARNING:backend_impl.cc(1875)] Destroying invalid entry.
[0610/212240:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
Still looking forward for a solution without errors.
Last edited by Bobses (2015-06-10 18:24:15)

Google earth crashing[SOLVED]

The current AUR PKGBUILD doesn't run on this system. I have an ati x200m using opensource drivers (radeon). I installed an older package 5.0.xx and I get less errors but it still crashes. I am guessing this is a video issue, but whatever it is I can't google a way to fix it. Any suggestions?
Failed to load "/opt/google-earth/libevll.so" because "/opt/google-earth/libevll.so: undefined symbol: gluNewTess"
EDIT: I've also rebuilt with this version - google-earth-5.1.3535.3218-1, I am getting the same error message.
EDIT SOLVED: I needed to install freeglut. This was not necessary on my desktop because I am using nvidia drivers.
Last edited by empthollow (2010-07-19 05:45:53)

The current AUR PKGBUILD doesn't run on this system. I have an ati x200m using opensource drivers (radeon). I installed an older package 5.0.xx and I get less errors but it still crashes. I am guessing this is a video issue, but whatever it is I can't google a way to fix it. Any suggestions?
Failed to load "/opt/google-earth/libevll.so" because "/opt/google-earth/libevll.so: undefined symbol: gluNewTess"
EDIT: I've also rebuilt with this version - google-earth-5.1.3535.3218-1, I am getting the same error message.
EDIT SOLVED: I needed to install freeglut. This was not necessary on my desktop because I am using nvidia drivers.
Last edited by empthollow (2010-07-19 05:45:53)

Why does Google Earth search crash with 10.8.5?

Everytime I try a search using Google Earth, Google Earth crashes. It worked fine before updating the OS. I've tried reloading Google Earth, all to no avail.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Why Does Google Earth Keep Crashing On My iPad 3?

Are other users of the iPad 3 having problems with Google Earth crashing while it's loading? Mine seems to fritz out when loading a lot of 3D info, like for a large city like New York. I've tried to research if this is a common problem with iPad 3 users, but I have found very little about other people having the same issue. My iPad 3 is brand new, with the latest iOS. I have done all the resetting I can to the iPad -- soft restart, hard restart, delete/reinstall app. No good. Still crashes. The only thing I haven't done is a full restore -- and I don't see doing all that for one app that is not working. Everything else on the iPad is working just fine. And I did complain to the developer. It works great on my Macs and iPhone, just seems to hate my iPad. Can anyone tell me something useful to make this app work?

I have the exact same problem on my ipad mini. It says 'google earth is running low on memory' and crashes.

Google earth compatibility with 10.6.8

Current version of Google Earth crashes immediately upon launch. Google appears to be aware of issue but their on line guide has not solver or indicated what issue might be.
Has anybody experienced this and foun a culprit?

Was having same problems, this seemed to work for me (disconnect from internet, launch GE, uncheck start-up tips in GE preferences, quit GE, reconnect to internet and relaunch GE): http://groups.google.com/a/googleproductforums.com/forum/#!category-topic/earth/ problems-and-errors/uOMuR5sBCXc

Google Earth won't use QGtkStyle

I'm running 64-bit Arch, and I can't get Google Earth to use QGtkStyle even though other 32-bit programs, e.g. Skype, are correctly themed. I have all the proper 32-bit libraries installed, including lib32-qt and lib32-gtk2. Here is my .gtkrc-2.0:
gtk-font-name="DejaVu Sans 9"
gtk-theme-name="Clearlooks"
gtk-icon-theme-name="Tango"
#gtk-fallback-icon-theme="Tango"
#gtk-toolbar-style=GTK_TOOLBAR_ICONS
gtk-menu-images=1
gtk-button-images=1
I also have
export GTK2_RC_FILES="/etc/gtk-2.0/gtkrc:$HOME/.gtkrc-2.0"
in my .bashrc. As I said, all 32-bit qt apps work correctly except Google Earth, which appears without the QGtkStyle theme and with poor font rendering. Anyone have any ideas?
Last edited by nbtrap (2012-07-21 17:28:27)

Zenther wrote:
Google Earth displays correctly for me. I followed these instructions for fixing the GTK themes in a QT app...
post https://bbs.archlinux.org/viewtopic.php … 7#p1131537 has the details but the short of it is:
1) run qtconfig in terminal
2) Select GUI Style: GTK+
3) Save changes and exit.
4) Relog in order the changes to take effect.
I hope you get it sorted out.
Thanks for th help. However, those steps do not work for Google Earth, though they seem to work for every other 32-bit qt application.

Leopard can't open Google Earth

After upgrading to Leopard, my eMac can't open Google Earth v.4.0. Do I have to add more memory?

John, your configuration should work for Google Earth. However I suggest you download the 4.2.x update and instal it. Both the update and the re-installation may fix your problem.
Neville

When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks

When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks

I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps

I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this?

I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

[SOLVED] Google Earth doesn't work with xf86-video-ati

Hi all,
I'm having a problem with the open-source ATI drivers. I haven't had much luck finding out anything from anywhere else, so I'm hoping someone here can help.
Whenever I start Google Earth, the graphics run EXTREMELY slowly, almost as if it's running on a system with low memory. I'm running an Acer Extensa 4420 with an AMD Athlon 64 X2 dual-core 64-bit processor with 2GB of RAM. As mentioned before, I'm running on the open-source xf86-video-ati drivers, but this is the only app that gives me problems. GL screensavers run fine, and glxgears runs without any significant input. Running Google Earth in terminal also gives no output.
And I'm not sure if this is related, but closing Google Earth also crashes X.
Here's xorg.conf:
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
#Free86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
Load "drm"
Load "synaptics"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
Option "DontZap" "no"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
Option "AutoAddDevices" "False"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us,de"
Option "XkbOptions" "grp:lwin_switch,grp_led:num,eurosign:e"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.10" # speed factor for low pointer movement
Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
Option "TapButton1" "1"
Option "TapButton2" "2"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Acer Laptop"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI Radeon"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Option "ForceTVOut" "true"
Option "TVStandard" "ntsc"
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon"
Monitor "Acer Laptop"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1200x800"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
Here's my drirc:
<driconf>
<device screen="0" driver="r300">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="texture_coord_units" value="8" />
<option name="fthrottle_mode" value="2" />
<option name="disable_stencil_two_side" value="false" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="fp_optimization" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_rast" value="false" />
<option name="command_buffer_size" value="8" />
<option name="round_mode" value="0" />
<option name="dither_mode" value="0" />
<option name="disable_lowimpact_fallback" value="true" />
<option name="texture_image_units" value="8" />
<option name="disable_s3tc" value="false" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="1" />
</application>
<application name="Google Earth" executable="googleearth">
</application>
</device>
</driconf>
Last edited by coolpyrofreak (2009-07-03 05:56:18)

I had the same problem (slow googleearth) with ATI Technologies Inc Radeon Mobility U1 (IGP 320m).
This .drirc solves it. I don't have an xorg.conf.
- no need for the 'disable_lowimpact_fallback' option
- no need to turn off 'atmosphere'
cat .drirc
<driconf>
<device screen="0" driver="radeon">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="no_rast" value="false" />
<option name="fthrottle_mode" value="2" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_neg_lod_bias" value="false" />
<option name="texture_units" value="3" />
<option name="dither_mode" value="0" />
<option name="hyperz" value="true" />
<option name="round_mode" value="0" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="0" />
<option name="allow_large_textures" value="1" />
</application>
</device>
</driconf>

Working with WMV Google Earth Video

Howdy. I am attempting to integrate a Google Earth movie I recorded (WMV format) into my project and to put it lightly... it's not going well. Not only is it unable to render the timeline in the project window when it gets to the wmv footage (just gets stuck while audio continues), but it takes an insanely long time to render... six hours for a 30 second clip.
I took a shot at transcoding the clip using handbrake to mp4 but it crashed instantly when added to the premier timeline.
Sorry for the ametuerish question. As you can tell, I'm new at this. Any help is much appreciated.

Good news. AME is a good "converter" too, and is often overlooked. While it might not have the range of some dedicated conversion apps., when it can work with footage, it does a good job.
Thanks for reporting your success!
Good luck,
Hunt

Google Earth low on memory and crashing

I'm using an ipad Air with maximum storage and latest iOS. Google Earth, previously a reliable app, is now consistently reporting low in memory and quickly crashing when in Stree View.
I've tried rebooting with no change.
Groan. I see Safari is still not working properly when composing messages here. Seems worse than last iOS version. Autocorrect not reliable and my KB shortcuts no longer work, e.g. To enter my Sig. And those misplaced caps...
TErry, UK

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Update of Google Earth 4.3 Continually Crashes before opening...

I just update the Google Earth from 4.2 to 4.3....upon trying to open it, it crashes every time I attempt to do this...??
Any input from You?

HI Robert,
Try deleting the Google preference file: com.Google.GoogleEarthPlus.plist
/Users/YourName/Library/Preferences. Open the Preferences folder, locate that file, drag it to the Trash, empty the Trash and reboot.
Try to launch Google Earth now.. If that doesn't help try this:
If you can't log in to Google Earth, you'll need to delete these files from your directory folder. Please follow these steps to delete 'dbCache.dat' and 'dbCache.dat.index':
From the Finder, open the Home Directory icon labeled with your user ID.
Select Library > Caches > Google Earth.
Look for the 'dbCache.dat' files.
Ctrl-click on both the 'dbCache.dat' and 'dbCache.dat.index' files and select Move to Trash to delete these files.
These files will be regenerated the next time you log in to Google Earth.
I found the last tip here at Google Help: http://earth.google.com/support/bin/answer.py?hl=en&answer=77769
Hope something works!
Carolyn
Message was edited by: Carolyn Samit

Google earth keeps crashing at start up.

My google earth keeps crashing at start up. I don't know what the problem is and I don't know how to delete all of my old kmz files. Ive tried deleting and re-installing and it still brings up my old files.
Help please?

I had what sounds like the same problem - my habit is to install software from an Admin account that I only use for that, and work in a different Standard account, but apparently the Google installer didn't set file owner/permissions right to accomodate that (not the first time I've run into this).
I promoted my usual user account to Admin, re-installed from that account, demoted back to Standard, and now all is fine. Performance is good, limited only as far as I can tell by my cable modem and/or Airport bit rate.

Compiz working slow, google earth crashing ...

Similar Messages

Maybe you are looking for