Complete beginnner needs help...

As a complete Flash beginner, I have a project I am trying to
make but I am unsure how to acheive it...
I want to to have 3 x 3 Frame Keyframe animations (very
simple) with a title keyframe in between each one. What I am
struggling with is that instead of repeating the keyframes lots of
times and having a huge project I want to repeat each 2 Keyframe
animation 30 times (making it a minute long) before moving onto the
text keyframe and then the next 2 keyframe animation to loop 30
times before moving on... I then want the whole thing to loop.
What code do you use in Flash CS3 (ActionScrpit 3.0) to
acheive this for each set of keyframes? To keep it simple they are
all one one layer. Any help would be gratefully recieved- thinking
this was a simple question I have been searching on here for ages
and cannot find anything that works... but I think its more do with
my lack of knowledge rather than lack of information...

I think I may have made my previous post more convoluted than
it needed to be :)
I just want to know what code to use to make a group of
keyframes repeat a certain number of times then carry on with the
rest of the movie..
Any tips in Actionscript 3 (or 2!) would be gratefully
appreciated!

Similar Messages

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

Complete novice needs help

Hi folks
I hope you can indulge me. I am a mature student studying with the Open University in the UK. In order to complete my degree I have to produce a (small) project (doesn't have to have full functionality) based on a Network application. I am limited to using Java and to some extent the software provided for me, which in this case is JBuilder3.5 (yes I know it's old!). I can, within reason download further software providing my tutor is ok with it but here's the rub I have no idea what I actually need. There is so much to read through and I am feeling a bit thick because I cannot pin anything down.
This is where I would appreciate any help from you experts. My project subject is a browser which can interpret web pages and then configure them to be displayed in a fromat that is prefered by the user not the author. I can build the GUI but I am stuck when it comes to building the functionality behind it. ie what packages do I need to download that can recognise XML/HTML tags in order to rearrange the display? Am I even on the right track? Is it actaully possible?
Because the project is only worked over a small period I don't need full functionality but have elected to deal with input/output fields, text placemnt/display/font (infromationl), graphic placement/deletion. I may also be alowed to update my version of Jbuilder.
I would be so grateful if somebody could at least point me in the right direction. I need to add here that I feel so stupid that I need replies in very plain english :o)
Wanda

Hi ddossot
Saw your note about using a proper IDE unfortunately I am obliged to use the one provided by my UNI. Reason being the markers of my project may not be up to date with other IDE's. Though I may be allowed to use a newer version of JBuilder. I am waiting to hear if I have permission to do so.
Here's another thick question. from what I remember, when studying Java last year, it has a number of libraries that can be imported to a project. When I download the HTML and XML stuff are they just added to the libraries already in place and if so how is it done.
ps hope they also have tutorials with them for the coding :o(
One last question; am I in the right forum for this sort of query or is there a novice one for thicko's like me? :o)
Wanda

Complete novice needs help getting SQL Query into Crystal Reports XI

Post Author: MissMarnie
CA Forum: Data Connectivity and SQL
So I was given an intro level web course and a monster reference guide in prep to format a report. One of our developers wrote me everything I need for the report into a SQL Query and now I'm supposed to format it in CR XII literally do not know what to do from here. I'm able to set up the correct server as a datasource, if that's useful, but I don't know how to make the querey into a bunch of formattable fields in CR. If anyone can walk me through this, I'd be so grateful. I've attempted to look up SQL query in both the help and the book but I keep hitting a wall. The help dialog says things like "press this button" with no reference to what "this button" is. I'm sure it's obvious to the knowledgeable but I'm in a complete fog. Thanks in advance

Post Author: synapsevampire
CA Forum: Data Connectivity and SQL
IF you're trying to get assistance with setting up a query as the source for a report, try posting your Crystal version and the database type.
Different software works differently.
In CR 9 and above, under the connection to the database you'll see Add Command. Select that and you can paste the query in.
As for not knowing how to generate a report, that requires experience, there's no generic solution of course..
-k

Nokia 8800 - Complete Newby Needs Help !!

Hi All
Im a complete newby to this tech lark so could do with some help!
Basically ive just got a nokia 8800 phone & its got nothing on it so I want to transfer some tunes, vids etc onto it.
Firstly ive installed the nokia pc suite & updated it on my pc but then relaised that the phone doesnt have a cable dock to connect to the pc !
Ive ordered a bluetooth dongle like this: http://cgi.ebay.co.uk/BLUETOOTH-DONGLE-FOR-NOKIA-N-GAGE-8800-6280-6230i-7373_W0QQitemZ220133688184QQ...
Do i need to install the software that come with the dongle? i.e. drivers & blue soleil?
When ive got passed this bit i assume pc suite will see the phone then?
Any step by step help would be appreciated.
Many thanks
Jason

Bluetooth and Windows is a bít tricky combination, because Windows XP (which I assume you have) has an inuildt Bluetooth driver software that works with many Bluetooth USB tcks tc. but not all.
YOu might have a Bluetooth that requires the Bluesoleil and the bluetooth conflicts in PC have been well documented in this board and everywhere else.
But you should try:
Install the CD first (if you have already put the bluetooth dongle to your PC without intalling the cd first you maybe in trouble already and it is a bit too lenghtly to hrlp, but google for xp bluetooth bluesoleil problem and oyu will find help.
However, if you have not yet put the bluetooth stick to you pc, put it there after you have installed the cd.
Then open PC suite and get connected and activate both phone bluetooth and pc and follow get connected wizard instructions

Complete newbie needs help inserting flv file into DW

This is a multi-part message in MIME format.
------=_NextPart_000_0015_01C98602.377A5370
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I'm having a challenge today. A client sent me two flv files.
When I =
installed CS4 I installed Flash for the first time so I'm
thinking, no =
problem. But I'd never opened it before (never needed it
until now). The =
app won't open. I just spent a ton of time uninstalling and
reinstalling =
and rebooting over and over and nothing...
So MAYBE, for now, I don't need it to work. I've also never
insterted =
Flash into DW. But it looks easy enough. In my html page I
choose =
insert/media/flv. So far so good. I've ftp'd the flv file so
I'm able to =
complete the dialog box with the path and size etc. I've
uploaded the =
progressiveplayer.swf and the chosen skin swf. I've saved the
html file =
it's embedded in and uploaded it. Shouldn't I now be able to
see this =
flv file displayed on the page? What did I miss? Here's the
link to my =
little test...
http://www.susanhowlett.com/assets/applets/susan-movie.html=20
The flv file is mm_susan_thanks.flv=20
Thanks for any insight/guidance.
Sheila
------=_NextPart_000_0015_01C98602.377A5370
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6001.18183"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>I'm having a
challenge today. A client =
sent me two=20
flv files. When I installed CS4 I installed Flash for the
first =
time so I'm=20
thinking, no problem. But I'd never opened it before (never
needed it =
until=20
now). The app won't open. I just spent a
ton of time =
uninstalling and=20
reinstalling and rebooting over and over and
nothing...</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>So MAYBE, for
now, I don't need it to =
work. I've=20
also never insterted Flash into DW. But it looks easy enough.
In my html =
page I=20
choose insert/media/flv. So far so good. I've ftp'd the flv
file so I'm =
able to=20
complete the dialog box with the path and size etc. I've
uploaded the=20
progressiveplayer.swf and the chosen skin swf. I've saved the
html file =
it's=20
embedded in and uploaded it. Shouldn't I now be able to see
this flv =
file=20
displayed on the page? What did I miss? Here's the link to my
little=20
test...</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"mhtml:{2BC949A9-CCEB-407F-8078-5F999C2CADAA}mid://00000013/!x-usc=
susanhowlett.com/assets/applets/susan-movie.html</A>=20
</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The flv file is
mm_susan_thanks.flv =
</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for any =
insight/guidance.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Sheila=20
</FONT> </DIV></FONT></DIV></DIV></BODY></HTML>
------=_NextPart_000_0015_01C98602.377A5370--

From my little knwledge, it is not possible to insert FLV
file in the HTML page directly.For this you have to made a player
with flash which plays the FLV.And this swf can emdded in the HTML
page.
You can also download free flash videoplayers like JW Player.
Thanks

Completely blocked, need help

hi,
have a serious problem: it happens that when i want to open a session
following error message appears: "Audition has encountered an error :[\Monk\main\common\PremiereShell\Src\PlayerFactory.cpp-379]". My two recent sessions i cannot get back anymore. Older sessions work fine. Restarting the computer does not help.
Is there an expert who could help me. It makes me sad........
Thanks,
Rolf

This is a really bad bug which has to be fixed rigth away by the AA-people !

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

I tried downloading the iOS8 to my iPod 5th generation and when it finished downloading it shut down completely and it said there was an error and no the iPod is in recovery mode. What can I do to restore it and update it? Please, I need help.

Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.

What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201407 When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course i couldn't without deauthorizing my account then reauthorizing. I need help!

When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course I couldn't without deauthorizing my account then reauthorizing. I need help! I want my ringtones and picturesd back, and can't get them. Does anyone know how to do this given my situation?
Thanks!

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!

I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!

I got it figured out myself... yaaaaay for me!

HT201210 i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!

Error
what is error code 1009?

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

Complete beginnner needs help...

Similar Messages

Maybe you are looking for