Complete clone of hard disk drive (windows and mac)

Hi,
I'd like to create a full clone of my current HDD because I'd like to backup everything.
Does anyone have an Ider how to clone both partitions in one?

Clone both the Mac and Windows partitions in one step? That may not be possible as you may need to use different software.
If you want to clone the Mac partition (to an external hard drive) then you can just boot from the install DVD that comes with your Mac and use Disk Utility.
If you want to clone the Windows partition you may use a software called Winclone. This software works if your Windows partition is in NTFS format.

Similar Messages

  • Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

    Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
    I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
    Any help is much appreciated.
    Thanks,
    Alex

    Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

  • How can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?

    QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
    AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
    Use Toshiba HDD Protection
    Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
    For more information on this utility, see the following article:
    TOSHIBA HDD Protection
    Optimize the drive
    Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
    In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
    In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
    You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
    Remove items from startup
    Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
    In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
    In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
    You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
    For more information, please see the following video:

    QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
    AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
    Use Toshiba HDD Protection
    Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
    For more information on this utility, see the following article:
    TOSHIBA HDD Protection
    Optimize the drive
    Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
    In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
    In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
    You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
    Remove items from startup
    Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
    In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
    In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
    You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
    For more information, please see the following video:

  • Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies.  How do I reverse this?

    Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies.  How do I reverse this?

    Paragraphs help the reader, just saying.
    What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
    Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
    It makes no difference at all.
    How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
    You can export while writing the metadata to the file in most cases.
    Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size. 
    HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
    I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
    Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
    You're somewhat confused and you need to
    1. Decide what exactly you want to do
    2. Then go about it.
    If I understand you correctly - and there's no guarantee that I do -  the easiest thing is to bring all your Photos into iPhoto and do everything from there.
    You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
    Regards
    TD

  • How to see my IPAD hardware configuration ( Like Hard disk  drive , processor and camera pixels )

    How to see my IPAD hardware configuration ( Like Hard disk  drive , processor and camera pixels )

    Yeah. It is called System Status.
    Check out this application on the App Store:
    System Status - device activity monitor (battery level, disk usage, file stats, CPU load, network details, memory info, process list, work time, charge monitoring, connection overview, routing table, os data, hw report, console log, netstat information)
    Techet
    Category: Utilities
    Updated: Oct 27, 2011
                       687 Ratings
    iTunes for Mac and Windows
    Please note that you have not been added to any email lists.
    Copyright © 2012 Apple Inc. All rights reserved
    Sent from my iPad

  • Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

    Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
    Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          2
      Total Number Of Cores:          4
      L2 Cache (per processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP11.005C.B08
      SMC Version (system):          1.7f10
      Hardware UUID:          00000000-0000-1000-8000-0017F2059956

    It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage. 
    WD Caviar Green
    WD Green 2TB
    For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
    WD Caviar Black 1TB 6Gb
    WD Black Caviar 2TB
    larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
    Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
    Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance.  TimeMachine sometimes makes a poor backup method with some green cases.

  • External hard disk for Pc and Mac

    Hello,
    i have a dilemma. The hard disk on my Ibook is almost full. I have a laptop from my company but i can't store too much private picture of songs on it. I wanted to have an external harddisk.
    Is it possbile to connect to one of other computer like a stick memory, or do I have to format and partition in each os.
    Thanks for a answer.

    So I can put all music and pictures that will be read by both computers.
    Yes you can share files that way.
    If i use a Aplle extreme router and I connect the hardisk on it, it will be possible to get images and music wireless from both computers also ?
    Yes

  • Is it possible to have multiple partitions on my hard disk drive and use Bootcamp to install Windows?

    Hi all,
    Here is my question: I have MBP early 2011 and was trying to install Windows 8 using Bootcamp but the option to install Windows is grayed out so I can’t click the box next to “Install or Remove Windows 7.” Is this because I have multiple partition on my hard disk drive? Is there anyway I can install Windows 8 using Bootcamp without deleting my partitions on my hard disk?
    Few more details:
    Mountain Lion 10.8.2
    Bootcamp 5.0.0
    Thanks for your response

    You can't create a Boot Camp partition on a drive you've already partitioned, and you can't install Windows 8 through Boot Camp at this time.
    (71680)

  • My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows.  The system is up and running on the SSD, with my old system disk now used for storage as it is stil

    My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows.  The system is up and running on the SSD, with my old system disk now used for storage as it is still readable.  The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop.  Can you point me to the best way to do this?  - Thanks

    If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Portable Hard drive formating for use with windows and mac operating system

    Just bought a verbatim sure fire 500g 800 firewire portable hard drive for my new macbook pro. I have not did bootcamp yet because I am deciding on wether to use Vista or the new windows 7 that will be coming out soon. The drive is already formated HFS+, how do I format the drive so I can write both windows and mac files to it. Help!!!

    how do I format the drive so I can write both windows and mac files to it.
    Either format it to MS-DOS from the DIsk Utility, or install a tool such as MacDrive into Windows and keep the drive in its current format, or install the NTFS-3G driver into Mac OS X and format the drive to NTFS in Windows.
    (45687)

  • Rescue and Recovery 4.31 - How to make backup for 2nd hard disk drive?

    What should I do that R & R version 4.31 (Windows 7, 64 bit) make backup for second hard drive?
    On the screen "Set Schedule and Preferences' in the options "Include partition" I don't have partition D: on my notebook and , of course, it can't be selected.
    ThinkPad W701ds, with two built-in disk drive (C: and D, backup is performed on the "USB External Storage Device '.
    Solved!
    Go to Solution.

    see this post http://forums.lenovo.com/t5/General-Discussion/Back-up-to-external-HD-7/m-p/322465#M9269
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • External hard disk drive problem with windows laptops?

    my other hard disk drive cannot be read or write on windows and on my macbook pro 13.

    If the HDD cannot be read on either machine, it may have failed.  Connect it to your MBP and open Disk Utility.  Is it recognized there?
    Ciao.

  • I have a hard disk drive with data that i want to back up onto another hard disk drive. I tried just copy and it won't let me paste it in the new drive. I have also tried to drag the files across and they won't go across. Does anyone know how to do this?

    I have an external hard disk drive with data that I want to back up onto another extrnal hard disk drive. I have tried to copy and paste but this wont give me a paste option. I have also tried to click and drag but it wont let me either. I have reformatted the external hard drive to accept both mac and pc files and this did not make any difference. Can anyone help me with this?

    How did you reformat the drive? If you formatted it as NTFS, your Mac will not be able to write files to it unless you use a small application such as Paragon's.
    Please reply as to how you formatted the drive.
    Clinton

  • I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

    I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • How to stream audio/vide​o files on bb playbook and create different play lists from another pc and/or external hard disk drive connected with a share router

    hi guys
    i wish to use my external hard disk drive (1tb) connected with a belkin share router as main storage drive and stream audio/ video and other files on bb playbook through wifi.
    also wish to create different playlists directly on playbook.
    please tell me guys how can I do it.
    thank you in advance

    Try this...
    http://forums.crackberry.com/blackberry-playbook-f​222/how-stream-video-music-more-your-mac-pc-your-p​...

Maybe you are looking for

  • Company code and Purchase Org during vendor registration

    Hi, I have one enterprise context, with many company codes and purchasing org. I am aware that vendor master data is at enterprise level in ESO. However while integrating to backend i need to capture the relevant co code and Purchasing org. When the

  • X11 Forwarding with SSH not working [SOLVED]

    I'm trying to follow the X11 forwarding guide on the wiki but to no avail. I'm using Putty and Xming from a Windows machine to SSH into the ArchLinux machine over my home network. When I log in through SSH with X11 forwarding enabled, my display vari

  • About migrating from 10.1.2 to 10.1.3 (page events)

    Hi forum, As authentication based on public key certificates only works under jdev 10.1.3.1, I'm upgrading my 10.1.2 application to that version. I'm following the Oracle document "Converting to the ADF Page Lifecycle from 10.1.2" (http://www.oracle.

  • How to Debug the Outbound IDOC

    Dear SDN Members, How to debug the outbound idoc please. Thanks in advance Yerukala Setty

  • IPhone stuck since upgrading to IOS 7

    Hello Disclaimer - I know this has come up several times before and I have tried several ways to solve this issue but nothing has worked so far. I upgraded to ios 7 and got to the terms and conditions page but wont take me to the next page (after hit