Complete delivery for Inter Company PO
Hi All,
We have following requirement from Client
Within intercompany business there is no chance to get a complete delivery directly managed in SAP. When ordering Finished goods where they will also need additionally other spares parts as well, presently they do not have the chance to mark a Inter company PO to be delivered completely.
They need a field to flag compareable to SD Customer orders (table:VBAK field: AUTLF) which allows only to create the delivery when for the complete demand of the PO.
Could you please provide us your suggestion and solution on this issue.
Thanks in advance.
Regards,
Srikanth P.
Dear Srikanth
Please maintain BOM for material perfectly.
PO will not consider BOM as it is meant only for purchase of material from outside.
You need to have a PO+SO process to finish this scenario successfully.
integeration of PO and SO through EDI or a web dynpro would be required if you want automation.
Similar Messages
-
Automatic PGI and delivery for Inter company STO
Hi,
We have a requirement as below,
Client have 3rd party software at weighbridge,which would track vehicle no,material qty,ship to party.
Here at Inter company STO,
PO will be raised,latter on we do VL10D,there by a delivery number is generated based on PO number.Then based on that PGI & delivery will be done.
Can we do auto PGI & delivery in this case.Client requirement is both VL10D,VL02n should happen automatically.
Assuming the number range for delivery in SAP and third party software are set same.Kindly advise me
PradeepCheck this where the same topic was discussed
STO Process Automation
G. Lakshmipathi -
Tax code field under INVOICE Tab to be Mandatory for Inter Company PO
Dear All,
In MIRO Tax code field under INVOICE Tab to be Mandatory for Inter Company PO u2013 ZNB & ZRT for company code 0001.
How do we set as mandatory fields for those two intercompany document types.
Regards,
TejaHi
If u want to maintain tax code as mandatory field in PO?
Then SPRO- SAP IMG- MM- Purchasing - Purchase order- Define document types
In this check the filed selection key for the document types.
Then select the SPRO- SAP IMG- MM- Purchasing - Purchase order- Define svreen lay out at document level.
In this for the field selection key select GR/IR control and click on tax as required. and then save
It will not allow to create PO with out maintaoning tax code.
If u want to do tax code as mandatory in MIRO
Then Go to OLMRLIST and make changes accordingly.
Thanks
Raman -
Different sales area for Inter company stock transfer and STO
Hi People,
Is it possible to have two different sales area's for Inter company stock transfer and within the company stock transfer. The problem is in below step
IMG->MM->Purchase Order->Setup stock transport order->Define shipping data for plants.
In this step when you define plant as customer, the same plant as customer needs to be maintaind for both STO and Inter company and there is only one entry of sales area possible for this single plant. So, how can the task be achieved.
I want that STO should be carried out by sales area lets say X/Y/Z
Inter company should go through A/B/C.hi dear,
It is not possible at all to have two sales area for given Plant in STO.
What is issue in that u can Transfer any MATERIAL, just need to extend it to given sales area.
Reagrds
AJIT K SINGH
HAPPY TO HELP U -
Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C
I want to handle Excise Duty handling for Inter company Stock Transport Orders in SAP 4.6C. I know that SAP has provided standard solutions in 4.7C by giving one standard table OIH09 which can be maintained through Customisation.
In 4.6C, even the Goods issue & Goods receipt button in item details of Stock Transport order is not available.
Is there any work around for the same.In IS-OIL, cross company postings were stopped with Note # 623910 & would
require a core modification to achieve this functionality. -
Re : Organizational data for inter-company billing
Hi
While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant) i am getting the following error
" Organizational data for inter-company billing
missing in plant SUDA "
How to solve.
Thanks
AntoHi Anto,
IMG check wheather you assing Supplying company sales area to Supplying plant.
IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
Regards,
M.Manickam -
Organizational data for inter-company billing missing in plant 2200
Organizational data for inter-company billing missing in plant 2200
Dear Siva,
This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
Now you try
I hope it will help you
Regards,
Murali. -
Sales & Operations Planning for Inter-company .
Hi
We have scenario like this : A will do the fore-cast , But A is not producing .
A wants to transfer the Forecast to B. B will produce and it owns the Inventory.
Once A get the Sales order , A will send the Inter-company sales process to B.
B will relive off the inventory and get paid by A.
How to transfer the SOP via demand management for Inter-company . How to consume the inter-company sales through demand management for Company B .
Any input will be highly appreciated.
Thanks
JeevanDear
As i understood
A create a SOP and tranfer to DM, it will get netted off by sales order created in A. Since A is not producing material, system will create a intercompany PO/PR to get the material from B.
B say getting SOP data from A and tranfer it to DM. Run MRP/produce and satisfy the request of A.
Now your question is how to transfer this SOP plan to B from A.
it is simple
When you run MRP in A, if you have assigned a special procurement key in material master, in plant A, system will automatically create a intercompany PR to B.
Hence you will get the plan in B as per the given date and qty.
I hope you got the point...pl come back if required -
Asking to maintain a valid document type for inter company
Hi friends
We have created a purchase order. It is STO inter-Co
There is no issue for a normal vendor when posting in MIGO; the error is just for inter-company vendors.
When doing MIGO the document shows OK. When posting or saving the document it is showing an error as Use a valid document type for inter company.
As per the error we have maintained the document types in OBA7 and the inter company posting are checked for the document types.
Can anyone help me on this issue how to proceed?hI SUKANYA
PLS EXPLAIN ME WHILE GL A/C CREATION FOR WE ASSIGNED G067 AND READY FOR A/C INPUT IS FOR WHAT
CAN U PLS EXPLAIN ITS USES . MEE ANSWER KOSAM WAIT CHESTUNTAA
THANKS
MALLIKARJUNA -
Asking to use a valid document type for inter company
Hi friends
We have created a purchase order. It is STO inter-Co
There is no issue for a normal vendor when posting; the error is just for inter-company vendors.
When doing MIGO the document shows OK. When posting or saving the document it is showing an error as Use a valid document type for inter company.
Can anyone help me on this issue?Hi
This problem raised If the trading partner assigned in the Vendor master in Control data and that trading partner is different fromt the trading partner assigned to particualr Co code.
Goto TCODE:OBA7 , selec the document type for which this error is coming - in the document type screen in control postings sections select the inter-company postings check box.
VVR -
Using AR Invoice but for Inter-company but with Workflow Approvals
My client is using AR invoices (FV70) for inter-company transactions for other businesses that are not yet on ECC. They also utilize workflow for their normal manual journal entries which can go through up to 4 approval paths one of the latter which requires an inter-company approval. Does it make sense for inter-company transactions that will begin with the AR invoice to go through the same approval paths from the beginning similar to how they wish to do it for regular journal postings (FV50)?
If the location of the companies is the same then Approval Paths does not make sense, however depending upon location changes and more importantly if their are different indirect tax liabilities on the two participating companies then the system might be required.
Regards,
Akhileshwar K -
NB type PO for inter company sales for a service item
Hi,
I need to create the above PO for a service item (which will not pass through the delivery process). But I do need the A/R and A/P in both the books as this is an inter company scenario. How can such a PO get invoiced directly w/o the delivery? The material is a service material (DIEN). What are the necessary configurations that need to be in place to complete this process?
Thanks!Hi
1. Define Business Area.
Got to IMG-> Enterprise structure->Definition-> Financial accounting->Maintain Business Area.
2. Assign Business Area
IMG -> Enterprise Structure -> Assignment -> Sales & Distribution -> Business Area Account Assignment > Assign Business Area to Plant and Division or Assign Business Area by Sales Area.
[Business Area|http://www.sap-basis-abap.com/sapfi003.htm]
[Business Area|http://www.sapstudymaterials.com/2007/12/mm-configuration-assign-business-area.html]
Regards -
Credit memo for Inter-company billing
Hi
We are trying to create a credit memo with reference to an inter company billing document. The business requirement is to create a credit memo to adjust the invoice value due to wrong value posted in the original inter-company invoice. Hence we do not want to use the sales returns route for this.
So, we are trying to create a credit memo request (ZCR) in VA01 with reference to the Inter company billing document (ZIV). We have maintained the copy control between ZCR and ZIV.
However, when creating a credit memo request (ZCR) with respect to the intercompany billing document, we get the below error in the sales order.
"Item category ZNLC is not defined" and "Check Item copy" with Message No: V1324.
ZNLC is the item category that we used in the intercompany delivery document.
We are able to ignore this message in sales order screen and save the credit memo request in VA01 and also create credit memo (ZG2) in VF01.
Pl provide your inputs on whether we are missing any other configuration.
Regards,
JohnHi
I have maintained the item level copy control settings as below.
In the copy control (VTAF) between ZCR (Credit memo request) and ZIV (Inter company billing) at the item level for ZNLC (Inter company item category coming source document), the following setup has been maintained
Copying requirements : 303
Copy schedule lines : Blank
Pos / neg qty : Blank
Pricing type : D
Update doc flow : X
Do not copy batch : blank
Pl let me know if there are any other settings to be done in config.
Thanks,
John -
How to prevent GRN manually for Inter Company PO?
Hi Experts,
We have Inter Company purchase process for which, sales order is created through IDoc in the backend on creation of Inter Company PO in SRM. By processing the sales order, outbound delivery is created and thereby inbound delivery and based on it, GRN is posted automatically by a job run.
The PO won't allow GRN manually beforehand but once if a partial delivery is done, then the PO allows doing further GRN manually. The business requirement is not to allow this even. How this can be achieved?
Can you please share your ideas?
Thanks in advance
Edited by: Ganesh Bitra on Nov 12, 2008 10:26 AMThanks for your feedback Narendra,
I have thought of that solution (using customer exit at save), but hoping maybe there was a setting in Customicing eather in CO or in PM to make message CJ066 appear. When looking at the source code it looks tlike there is a setting in customizing to be triggered, but I cannot find out where..
BR
Ellen
Edited by: Ellen Ødegaard on Apr 29, 2008 2:08 PM -
What are the questions they will ask for inter company sales?
hi all gurus,
pls. let me know the process of inter company sales and the questions can
ask in the interview.
thanks all
arunHi Arun,
Plz check these links which have most FAQs and interview questions on SD.
http://storage-search-swicki.eurekster.com/SAPSDfaq/
http://www.sapfans.com/sapfans/sapfaq/faqsd.htm
http://www.sap-img.com/sap-sd/important-tips-for-interview-for-sap-sd.htm
http://www.sap-img.com/sap-sd/sap-sd-interview-questions.htm
http://www.sap-img.com/sap-sd/interview-questions-and-answers-on-sap-sd.htm
http://www.sap-img.com/sap-sd/some-sap-sd-interview-questions-1.htm
http://www.sap-img.com/sap-sd/some-sap-sd-interview-questions-2.htm
http://www.sap-img.com/sap-sd/sd-questions-on-corporate-structure.htm
http://www.sap-img.com/sap-sd/short-sap-sd-questions-1.htm
http://www.sap-img.com/sap-sd/short-sap-sd-questions-2.htm
http://www.sap-img.com/sap-sd/short-sap-sd-questions-3.htm
http://www.sap-img.com/sap-sd/sd-faq.htm
http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
http://www.sap-img.com/sap-sd/why-do-we-assign-division-to-sales-organisation.htm
Plz mark helpful answers and close the thread once it is solved/answered.
Thanks,
Vinay
Maybe you are looking for
-
I cannot open pictures from iphoto. I see them but when I click on them, I get this exclamation point inside a triangle
-
In old Volume license days, we just script the install with a single license key for CLP licensing. Now it requires a different package for every single install with a different login id. What if you have to do 10 or 100 with multiple ids
-
Can the text in the header row be slanted?
In Excel the text in the header row can be slanted at an angle in order to show a long header text in a narrow column. Can this be done in Numbers?
-
hey , The requirement is like a record is being accessed from the database through a JDBC adapter into XI.In the record there are different fields concatenated as a string and these fields are to be mapped to the target side i.e Idoc which can be do
-
Can a C2890A printer be used with a laptop?
Can a C2890A printer be used with a HP 15-1004dx laptop?