Complete Guide to iPad in France

So this past week, I was in France with my new iPad with 4G LTE. I was worried about getting 3G service beforehand due to a few threads I saw posted here. I've decided that after coming back, I would help out any future travellers who would want 3G service when visiting Paris. Just to let you know, thus applies to all AT&T iPad models and all new 4G models including Verizon and other carriers,
First of all, there are two major carriers in France: Orange and SFR. These two have plently of shops around Paris, so that won't be an issue. In my case, I went with SFR. I would recommend going with them since they seem to have the best deals and the most amount of stores in the Paris area. The one I went to was located on the Champ Ellyse's, about halfway down the street. Before you go, bring a print out of with page: http://www.sfr.fr/mobile/offres-detail/ipad-pret-a-surfer?vue=000mg0. It will help avoid asking for the wrong thing and a huge misunderstanding. Also bring a photo ID, such as a driver's license or passport along with a credit card or some cash. Your iPad is also necessary. When you go in, show the guy your printout paper and he will know what to do. After about 10 minutes of activation, your iPad will be set to use 3G in the entire country. Just to let you know, 2 days of a certain amount of 3G is included and additional days can be added on. I didn't want to go back to the store the entire week, so I added one of the data plans from the bottem left of the print out (mo is supposed to be mb). This extended the 2 days to a whole month and covered my data for the whole trip. When you get back to America, use the micro-SIM ejector tool included with your iPad or use the end of a paper clip. Place it in the small hole on the edge of the top left of the ipad and apply some pressure (don't worry, it won't break). Pop out the tray, pull out the SFR card, and place your old carrier card back in and restart. You should be good to go and it would be as if nothing happened.
Some notes:
Absolutely print out the sheet. While they can speak English, they aren't the best and it can be a huge barrier
You DO NOT need a French bank account/address. Some store personnell may tell you otherwise, but show them the paper again. It is not required for prepaid, which is exactly what the iPad is.
Bring your Passport/Driver's License. While he said a photo ID, he mentioned those two in specific, so I would be safe with either of those two.
A data plan includes free acces to all public SFR hotspots. You will recieve a notification (in French) including your password when one of these hotspots comes into range. I wasn't able to figure out where to enter it since the website was Frence, but hopefully you can decode it better than me.
The SIM card with the 200mb data plan totaled to 25 euros, which is not bad by any means
If you choose to continuously recharge every 2 days, the number is only in French, so make sure you have a translater first! I know Orange has recharging booths around the city, but I'm not sure if English is available.
I don't have any Orange info. available, so feel free to share if you would like.
When connected back to the American network after changing the card back, it may take a few minutes to find a cell tower. Don't worry if it says searcing for a while. Just give it some time.
Store your MicroSim card in a safe place. All of your wireless data information is on there and unless you want to deal with the carrier customer service, I'd recommend being carful with it to make sure you don't mess it up
I hope this helped those of you who needed some guidance with travel to France. If you need any clarifications or would like to add information, feel free to comment below. Also, sorry for the spelling/grammar errors. My flight landed a few hours ago so technically it's like 4 am in my head.

Great resource. I wish I had. Stumbled on this earlier.  I have embarked down this path with Orange with some limited success.
Here is my current status.  If there is someone out there who can help me further, I would greatly appreciate it!
I went into an orange store with my AT&T iPad 4g LTE and purchased a "pass lets go" pay as you go micro sim card for 8 €, which includes 100 mb of data and expires after 31 days if not used.  From there are supposed to be able to  purchase additonal data plans etc... But i have no idea how. The lady spoke just enough English to make the sale, but I could not get her to answer my remaining questions
My issues questions:
1. I believe the pay as you go plans entitle you to access oranges 30,000 wifi hotspots, but in order to do this you need a password, which. You can supposedly get by texting a #125#. However, I have no idea how to text his from my iPad?
2. I have no ideas how to go about actually purchasing additional time. I have not yet burned through the 100mb so maybe I will be prompted when I do. I will be sure to update with the results.  However,  the only English note in my documentation that I received informed me that I have to send in a copy of my passport along with this voucher in order to be able to recharge my account.   I don't know if this applies only to people who purchased online as I provided a US drivers license when I went into the store.
If I could figure this all out then I think that orange is a good way to go.  The initial investment of 8€ up front is very low so if you loose your sim card or let it expire then it doesn't really matter. That plans after that also seem very reasonable. 
My final advice: buy in store, bring your iPad, bring drivers license or passport and don't leave the store until you get the above two questions answered. Good luck.

Similar Messages

  • The Complete Guide to iPad Cases and Protection

    This is a recent write-up 5/13/2010, from iLounge on the best and worst iPad cases. It's really helpful for people like myself who tend to purchase 3 or 4 cases, keep the best and return the rest.
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-ipad-ca ses-protection/

    Thanks--lot's of useful information in that guide. I'm getting the Marware Eco-vue and was glad to see it was well regarded. For someone looking for an inexpensive sleeve, the Kensington at $10.00 looks good.
    I also found their notes on screen protection interesting. I was going to forgo screen protection, but their experiences are making me think again.

  • How can I delete a bad app completely from my iPad mini in order to re-download it as though I never had it?

    How can I delete a bad app completely from my iPad mini in order to re-download it as though I never had it?

    Yes, it will now always show that you purchased it, but with it deleted from ipad, when yu click the icon to download again, it will download the latest versioon available from the app store.
    You cannot delete what is in the app store. nor can you erase your previous history of purchasing the app.

  • What is the best way to use a cellular enabled iPad in France?

    What is the best way to use a cellular enabled iPad in France?

    Frankly, I expect a bit more courtesy and details from someone wanting help from fellow users.
    Don't use your AT&T SIM/plan out of the country for the iPad.
    Just purchase a SIM in France for about 15 euros and use that.
    -> http://www.tripadvisor.com/ShowTopic-g187070-i12-k4781004-o30-Prepaid_French_3G_ micro_SIM_for_iPad_it_s_not_a_problem-France.html

  • Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. How to get rid of this problem? Iregularly travel from the Netherlands to France.

    Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. Not in France, because my bank account number is Dutch (it says), not in the Nteherlands because I should buy in the Dutch app stoe.
    How to get rid of this problem? I regularly travel from the Netherlands to France.
    Thanks in advvance,
    Hans

    You can find out how to get service for your iPad on this web page:
    http://support.apple.com/kb/index?page=servicefaq&geo=Philippines&product=ipad
    Regards.

  • PDF Fill-In Files - Can they be completed on an iPad

    PDF Fill-In Files - Can these be completed on the iPad
    If so, which Apps can do it?

    The answer is Yes using PDF Expert.

  • Integration of JSR-168 portlet into Portal - Complete Guide

    Hi there,
    the CE 7.1 is described to be compatible with JSR-168 portlets.
    Our Company has developed a JSR-168 portlet which comes as a WAR-File
    which can be easily included in other application server and portals (WebShpere, Apache).
    But integration in SAP Netweaver fails - I am missing a complete documentation
    which describes me the necessary steps to integrate a JSR-168 portlet application
    into the SAP Application Server and also how to integrate the GUI into a View of the NW portal.
    PLEASE HELP ME!!!
    Things I tried - Things I failed:
    - Imported a EAR-File into Developement Studio and tried to add it to Server
      -> Message  "EAR Project: ... should have the SAP specific facet in order EAR to be built."
    - Deployement via "Deployement Tool" of Netweaver 2.0 (2004s) worked
      and I was able to start app but no integration into NW portal view was possible
    (Where is the deployement tool in NW 7.1 CE?!?!?)
    - I wanted to create a PAR-File by a WAR-File but dont know how?
    - I did not find any iView template which is for my portlet type.
    Did anyone out there has the same probs or could help me....
    Thanks on advance,
    Andi-)
    Edited by: Markus Sümmchen on Oct 6, 2008 1:47 PM

    Hi Markus,
    There is no complete guide for integration of JSR-168 portlets into a portal; however Diyan is correct.
    In a nutshell, once you have deployed your portlet, you use GPAL technology in the SAP NetWeaver Portal of CE to create an iView wrapper in the PCD. All of this done by a portal content admin in the Portal Content Studio. Your deployed portet should be displayed in the "Portlets" repository within the Portal Catalog of the Portal Content Studio.
    For conceptual and how-to documentation, refer to the following SAP Help Portal links:
    - Generic Portal Application Layer (GPAL) Repositories: http://help.sap.com/saphelp_nwce10/helpdata/en/44/5e93dc35624ddee10000000a1553f7/frameset.htm
    - Integrating Applications into the Portal: http://help.sap.com/saphelp_nwce10/helpdata/en/45/90e8bfaec26c4ee10000000a1553f7/frameset.htm
    - Working with GPAL Repositories: http://help.sap.com/saphelp_nwce10/helpdata/en/44/5b96b37b6f4de1e10000000a1553f7/frameset.htm
    Please let me know if this works for you.
    Michael

  • Where do I buy a user guide for Ipad 2 16 gig, where do I buy a user guide for Ipad 2 16 gig

    where do I buy a user guide for IPAD 2  16 gig

    There is a manual in the iBooks app on your iPad.  You can also see the manual at:
    http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf
    Did you need more than that?  Or do you have a specific question?

  • HT4061 Can I recharge my iPad in France using a typical travel adapter?

    Can I recharge my iPad in France using a typical travel adapter?

    Yes - the iPad's charger is rated for 100 to 240 V so you just need a plug adapter, you don't need a converter

  • After syncing everything from iPad 2 to iPad 3 can I completely wipe my iPad or would it affect anything?

    Hi!
    So I still need a little help with apple software, I've synced most of my apps& valuable information from iPad 2 - iPad 3, however, I need to completely wipe my iPad 2 before selling it. Would this affect any synced items? I do have most things saved on iCloud but I'm not sure if it would disappear if the iPad it came from is wiped. :( (e.g, docs on pages, notes, pictures, calender stuff .. Etc)
    Furthermore, how do I go about syncing camera videos?
    Thanks! :)
    P.s. the synced calender events show up in green once synced to the new iPad, as obvious as this sounds, why is this?? & would these remain despite wiping my ipad2?

    Would this affect any synced items?
    No.
    Furthermore, how do I go about syncing camera videos?
    There is no syncing of Camera videos. Photos/videos in the Camera Roll can and should be imported by your computer as with any other digitla camera. The iCloud PhotoStream is for photos only and is temporary - limited to 1,000 photos and 30 days.
    http://support.apple.com/kb/HT4083

  • How do I completly delete from ipad purchase completely gone

    How do I completly delete from ipad purchase completely gone

    you can delete an app from your iPad by:  locate the app's icon on your home screen, touch and hold the icon until it starts to jiggle, touch the small x that will now appear at the upper left of the icon.
    Note that while this deletes the app from you iPad it will still appear in the App Store under Purchased.
    If you are synching your iPad to a computer, you can go into the App Store from the computer and make the app "hidden", but you cannot get entirely rid of the record that you purchased this app.

  • Is there a User guide for iPad 1,1 iPhone iOs5.1.1 9206B platform?

    Is there a User Guide for iPad 1,1 with iPhone 9206B iOs 5.1.1 ?
    System does not respond to Apps Store (crashes constantly),. I have no computer so of course nothing else on this device works either. Safari errors about JavaScript, don't get me started on iTunes. (they keep my cash, but no purchase history!) HELP. I have erased/ removed started over ("restored") NOT multiple times. Drowning here

    Manuals http://support.apple.com/manuals/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Complete-guide on UDFs

    hi
    am basically an Abaper,i need complete guide from basics of how to write udfs in xi,with screen shots if possible.....
    points will be awarded for helpfull answers
    regards
    chandrakanth.k

    Hi,
    UDF STEPS *
    Activities
    1. To create a new user-defined function, in the data-flow editor, choose Create New Function (This
    graphic is explained in the accompanying text), which is located on the lower left-hand side of the
    screen. In the menu, choose Simple Function or Advanced Function.
    2. In the window that appears, specify the attributes of the new function:
    Name
    Technical name of the function. The name is displayed in the function chooser and on the data-flow
    object.
    Description
    Description of how the function is used.
    Cache
    Function type (see above)
    Argument Count
    In this table, you specify the number of input values the function can process, and name them. All
    functions are of type String.
    3. In the window that appears, you can create Java source code:
    a. You can import Java packages to your methods from the Imports input field, by specifying them
    separated by a comma or semi-colon:
    You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since
    all message mappings require these packages and therefore import them. You should be able to
    access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the
    package under Import. In other words, you do not have to import it as an archive into the Integration
    Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the
    SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
    In addition to the standard packages, you can also specify Java packages that you have imported as
    archives and that are located in the same, or in an underlying software component version as the
    message mapping.
    b. Create your Java source text in the editor window or copy source text from another editor.
    4. Confirm with Save and Close.
    5. User-defined functions are limited to the message mapping in which you created the function. To
    save the new function, save the message mapping.
    6. To test the function, use the test environment.
    The new function is now visible in the User-Defined function category. When you select this category,
    a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the
    function to the data-flow editor, choose the arrow next to the button and select from the list box
    displayed.
    Check this for UDF's
    UDF Links *
    http://java.sun.com/j2se/1.5.0/docs/api/
    /people/krishna.moorthyp/blog/2006/07/29/documentation-html-editor-in-xi
    /people/sap.user72/blog/2006/02/06/xi-mapping-tool-exports
    http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
    UDF -
    http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
    + UDF Help +
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/718e40496f6f1de10000000a1550b0/content.htm
    regards,
    Kishore

  • HT4859 What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be complete". My iPad is plugged in, locked and connected to wi-fi.  I still have available 11GB storage from 15GB total storage from iCloud.

    What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be completed". My iPad is plugged in, locked and connected to wi-fi.  I still have available 11GB storage from 15GB total storage from iCloud.

    I'm having exactly the same problem. I have a new iPad, my iCloud account is set up and verified (I wouldn't be logged in and writing this otherwise), auto backups are turned on, but it's never completed a backup. If I manually select 'Backup Now' in iCloud Settings, it times out while estimating time remaining. Strangely, today my iCloud free storage space went from 5G to 4.9G then back to 5G. Annoyingly, I'm now getting reminders that I've never backed it up! The iCloud help I followed from the forum didn't cover this error message.

  • Intalling 4.3 completely restored my ipad

    Is there a way to retrieve all my previous app store purchases from Apple?...
    Installing 4.3 completely restored my iPad 1 and I'm freaking as there were lots of aps I had bought... and they're all GONE!

    Hi,
    Connect your iPad to your computer. Launch iTunes. Select the Apps tab in the menu. Click the Sync button bottom right side of the iTunes window.
    You can view your apps under Library on the left side of the iTunes window.
    Good idea to create a backup for your iPad, help at this link.
    http://support.apple.com/kb/ht1414
    Carolyn

Maybe you are looking for

  • Thunderbolt  ethernet adapter

    Hi, Using the wired thunderbolt ethernet adapter my network works for about a minute after the adapter is plugged in then stops working with the cable showing as unplugged in network settings.  The only way to reconnect is to pull the adapter and re-

  • Interconnect and Web Services

    We have OIC version 10.1.2.2 and are looking to have expose our message objects (written on DB adaptors) to Web Services by having a generic Web Service spoke. The plan is to: For the publishers it seems fairly straight forward to expose the publishe

  • Korean Font for Belle

    I downloaded an English-Korean dictionary for my Nokia 500, pleasantly surprised by its availability (Nokia/Ovi Store) and price (zero.) Unfortunately, it is useless as it shows all Korean text as boxes. A Korean font is needed - where could I get on

  • Search help in web dynpro for a individual element of structure

    Hi ALL, I'm a screen where i have imported the structure from DDIC into the context of the view. The issue I'm facing is how to attach a search help for a particular element of structure. Example: Z_structure:                       name              

  • Unidrive SP CANOpen PDO

    Hello,  I am currently working to control a Control Techniques Drive system via LabView and CanOpen, such that the drive system acts as a vehicle emulator. So far I’ve been able to read and write different parameters from LabView to the Control Techn