Complete message flow Monitoring from webclient to SAP CRM system

Dear Friends,
  I need some step by step  monitoring guidance for my scenario friends.
My Scenario:
   Webclient-->PI7.0--
>SAP CRM
                  -<--      <--
Step !:
1.  When webclient send the SOAP Request to PI through sender soap adapter with qos (Best Effort )
2.  It reaches PI and send the data to SAP CRM sytem *through Server Proxies ( Mode - sync )*
3. I have creted wsdl file in ID and send the file to the person who is working in webclient.
When a webclient send the request it waits for the response.
I need your guidance on how to monitor the as a step by step guidance.
Friends i am a Novice to PI.
Kindly help me.

Hi friends,
When i run the transaction I am getting the following error in SXMB_MONI in PI
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
  <SAP:Category>XIServer</SAP:Category>
  <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
  <SAP:P1>401</SAP:P1>
  <SAP:P2>Unauthorized</SAP:P2>
  <SAP:P3 />
  <SAP:P4 />
Kindly suggets me what i need to do...

Similar Messages

  • Upload data from Excel to Sap-Crm

    Hi All,
    I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

    Try the following :
    Class: CL_GUI_FRONTEND_SERVICES
    Method: GUI_UPLOAD
    Thanks
    <b>Allot points if this helps!</b>

  • Creating support notification (Solution Manager) from Web UI SAP CRM

    Hi,
    We have integrated Solution Manager (SM) with SAP CRM.
    Does SAP support has solution with support notification ?
    How we can create support notification from Web UI SAP CRM ?
    Denis.

    Hi
    There is a major change of inclusion of CRM ITSM in solman 7.1 that is why you might be confused.
    Anyway let me explain
    enter the tcode solman_workcenter in solman choose the incident management tab
    now  on the left side you can see an action for Create support message
    thus clicking on it will open the browser for posting messages
    (the same can be shared with end user for message posting )
    further once posted it is accessible in this incident management tab for further processing and you get the status wise queries in overview.
    hope its clear now
    regards
    prakhar

  • Upload data from Excel into SAP CRM using webservices

    Hi,
               I want to upload the data from EXCEL into SAP CRM using a web  service, can anyone say me the process and also how to map the excel and the source code structures.
    Thanks,
    Sanju.

    Try the following :
    Class: CL_GUI_FRONTEND_SERVICES
    Method: GUI_UPLOAD
    Thanks
    <b>Allot points if this helps!</b>

  • Upload of Campaign and Leads from flat file into SAP CRM system

    Hi Gurus,
    We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
    Please let me know the possible ways of doing this.
    Reward points are assured.
    Thanks in advance.

    Hi
    you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
    please do reward points if helpful
    regards
    Dinaker vikas

  • Mass Delete of BDocs in SAP CRM system

    Dear SDC team,
    We like to hard delete some BDocs which are hanging in the txn SMW01 in CRM 5.2 system.
    As of now we do not see a option to delete these unnecessary BDocs,  as they are in Intermediate state (I04) .
    Please tell us if there any standard report which can be used to do Mass Delete of BDocs in SAP CRM system.
    Or Is there any Tables which need to be emptied .
    Please help ..Points would be rewarded .
    Regards
    Ritvij

    hi
    Concerning the BDOCs without error, there is a job that you can schedule to run daily that cleans the BDocs processed without errors from the database.
    The details of this job are:
    Job name: SMO6_REORG
    Job program: SMO6_REORG
    Variants: SAP_MW_REORG
    Trace data (days to hold): 7 (recomended by SAP)
    Trace log (days to hold): 7 (recomended by SAP)
    Period: daily.
    Besides i should tell you I looked through Help and there are no best practices that I could find.We went through this process at one of my clients. They had 40,000 pluserror'd BDOCs and thousands of processed ones. The Middleware guycreated a program to delete the BDOCs that were over 2 months old andhad completed successfully to prevent the further build up of theseBDOCs. SAP Help says they are marked for deletion after they areprocessed, but it doesn't look like they get removed as wanted..
    From SAP Help:
    Deleting Processed BDoc Messages
    1. Processed BDoc messages cannot be archived.
    2. BDoc messages that have been processed successfully are marked fordeletion.
    Procedure
    To delete processed BDoc messages choose Architecture and Technology >Middleware > Message Flow > Delete Processed BDoc Messages
    The messages you selected will be deleted.
    and regarding deletion of non errant Bdocs
    Usually there are two schools of thought on this issue:
    1) Make the hard decision to go back to the beginning and startcorrectly all the things that caused these to error out (bank codes, taxcodes, config on R/3 side but not on CRM side, etc.). Then these can bereprocessed and everything will be brought up to date in the system.This takes time and may neccesistate hiring a Middleware resource for ashort term to help go through the process. The big part of this isidentifying those config items that are out of synch between R/3 andCRM.
    2) The other way to handle these is to go through the errors quickly,gain an insight into the cause of the errors, and correct the bigthings. Delete all the old error'd BDOCs and then bring down all the bigitems again - BPs, Sales orders, products, and so forth. This is muchfaster process, but has it's own risks and problems vs Option 1 above.As these items come in, if you haven't fixed the config problems, theywill error out again. It's a fix and move - fix and move process. In theend you may have some missing data still, but the time commitment ismuch lower. You just need to get leadership's buy-in to this process.
    Those error'd BDOCs are a problem and point out all the datainconsistencies that exist in the system. They are also a drag onperformance and need to be processed one way or another. After that,keeping them under a "1000" number is imperative. If you don't, theproblem will get away from you again.
    finally Some Transaction Codes that people might find useful for working withBDOCs:
    SMW01 Display BDocs
    SMW02 Display BDoc Summary
    SMW02A BDoc Messages: Show Top N Errors
    SMW03 Show stats of unproc. BDoc messages
    SMW10 Bdoc structure chekker
    SMW19 Copy BDoc and process
    SMW20 Process BDocs
    SMW3EX1 Flow Carrier Example
    SMW3FDBDOC Maintain Bdoctype dep. Flows
    SMW3FDCUST Maintain Customer Flows
    SMW3FDIF Maintain Bdoctype dep. Attributes
    SMW3FDSTD Maintain Standard Flows
    SMW3RBM Convert BDoc Messages to XML
    SMW3RC BDoc Message Error Recovery
    SMW3RCW BDoc Message Error Processor
    SMW3STOP1 General Stop Configuration
    SMW3STOP2 BDoc Type Stop Configuration
    SMW3WD Watchdog for failed BDoc Messages
    SMW3_00 BDoc Type Settings
    SMW3_GSB Generic Bridge Activation
    SMW3_GSB2 Generic Synch. Bridge Configuration
    SMW3_GSB_SHOW Display Generic Synch Bridge Config
    SMWMBSTATDISP BDoc statistics
    hope info will help your cause,i told all this coz before deleting the Bdocs complete understanding of the errant and non errant Bdocs is necessary,
    best regards
    ashish

  • Can Inbound IDOC create a BP(Business partner) In SAP CRM system

    Hi
    Req:
    Contractor data is transfered from ERP system to CRM using Message type HRMD_ABA with ALE Distribution Model in place.
    Inbound IDOC is Successfully Posted  when checked in WE05  in SAP CRM System.
    Question :
    1. Can  an INBOUND Idoc create  BP automatically  or is there  need of Configuration or Any custom program .
    Appreciate Your Response
    Bhanu Polsani
    Edited by: Bhanu Polsani on Oct 4, 2011 6:10 PM
    Edited by: Bhanu Polsani on Oct 4, 2011 6:16 PM

    You can maintain two different address for the business agreements (can be treated as mailing address for the printed invoice)but you can not maintain more than one standard address for BP as any given time.
    Regards,
    Sanjoy

  • Unable to recieve mails from external world to CRM system

    We are using CRM 5.0 Application. As apart of it we configured exchange
    server for sending and receving mails from CRM system.The problem is
    our CRM system is unable to recieve the mails from the exchange server.
    All the settings fro receving the mails has done in exchange server.But
    our CRM system is not capturing the mails.We also Maintained all the
    parameters fron SAP level and we are able to send the messages to the
    external sites,while receving only we are facing problem.
    Pls guide us regarding this issue
    Its very urgent
    Thanks
    Kovela

    Hi Julis
    Thanks for your valuable inputs.
    As you said we have already done that settings in SCOT and also the other things specified by you.But we are unable to recive the mails to our CRM System.
    Mail are going to external ids from CRM. While replying back exchange server is also receiving it. And as said is also forwarding to the contact id (crm.xyz.com).
    But there it waits for time and bounces back because SAP CRM system (and the concerned user for whom that email is assigned) is not accepting the email.
    I also sent all the steps what we configured to your personal id with reference to sdn.
    Pls provide your suggestions
    Thanks
    Amar
    NOTE
    good points available for your suggestions

  • Error while downloading Contacts from R/3 to CRM system

    Hi All,
    I am trying to download Contacts from R/3 to CRM system.
    Through Initial Download. For this i have set filters through Tcode: R3AC1
    as on KNVP and KNVV for the field VKORG.
    As we have our requirement to download contacts based on or differentiating
    on 'Sales Org".
    We have downloaded our Accounts properly without any errors.
    But for Contacts we are facing issues such as one or more extra
    relationships are getting created between Contacts and Accounts other than
    its original Contacts.
    Means already existing contacts are creating more relationships after
    download.
    But a unique feature is visible for all, All those with false
    contact-account relationships.
    Contact has field value for 'Address type' missing while the same address
    type field is properly added for correct relationships. ( please find attached the screenshot of the same)
    Any pointers in which direction we should proceed for the solution would be
    appreciated.
    Thanks in advance.
    Cheers,
    Sharad

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • IDOC Transfer from R/3 to CRM System

    Hi,
    I want to transfer HR Data from R/3 to CRM System.
    Scenario1 : I have to transfer National insurance number ( Infotype 002) to CRM system where we have rename this field as NI number. I am transferring data through PFAL Transaction but this field is not getting transferred. I think IDOC Structure needs to be enhanced eitherways mapping will be required. Kindly help me out with ALE and IDOC structure.
    Scenario2: I have to transfer Address Infotype 006 Subtype 02(Work Address) . How to Transfer this.
    Scenario3: I have to transfer Pension Number to CRM. Sorry I dont know the infotype number for Pension number.
    Kindly help me out with these scenarios. I have not worked much on ALE so I am facing this prolem. Do I have to use the standard transaction PFAL or Customised.
    Thanks,
    Mohit

    hi
    you can use PFAL to transfer HR master data.
    the data transfer from r/3 to crm is by means of bdoc and not through idoc.
    http://help.sap.com/saphelp_crm20c/helpdata/en/3b/e13b38fedcb72de10000009b38f889/frameset.htm
    cheers,
    hakim

  • How to Import DaRT into SAP CRM System

    Hi Everybody,
    Can some body help me in knowing how to import DaRT ( Data Retention Tool) into SAP CRM system. This is an urgent requirement. Your early reply will ab appreicated.
    Thanks in Advance
    Sirfraz

    Hi Kaustubh,
    Use the FM ARCHIVFILE_CLIENT_TO_SERVER.
    Give Filename + path for both the source and destination and your file will get transferred to the specified directory in AL11.
    But I am not sure about creating your own directory in AL11.
    Reward if helpful.
    Regards
    Hemant Khemani

  • How to extract Taxonomy data from MDMGX transaction of CRM system

    Hi all,
    I have a requirement on product master where in i have to upload data into MDM as taxonomy table from  MDMGX transaction in CRM system. Is it possible? If yes can anyone guide me the stepwise procedure as i observed it involves the Function Modules like MDM_COMM_CAT_ATTRIBUTES_EXTR.
    Thanks in advance
    Samatha

    Yes,
    You can very well do it. You need to define parameter " Hierarchy ID" in function module for exceptional cases in MDMGX.  This hierarchy ID you can get using Transaction COMM_HIERARCHY in CRM..
    This will solve you requirement....
    Thanks and Regards,
    Shiv

  • Check SAP CRM System status - Web service

    is there a way to check a SAP CRM system status - is it available? just simple check to see it SAP CRM system is up and running? Is web service available?
    Jawahar

    Hello
    This u can check in SICF transaction.
    Also u can check in CCMS monitoring

  • Error Message while connecting Crystal reports with SAP CRM

    Hello Friends,
    I am able to establish a connection with Crystal Reports with SAP CRM but after that i get a error Function module "Crystal/Get_ODS_field_Info "not found & Database connection error RFC/invalid/ handle".
    Please advice how to solve this.
    Regards
    Swati

    Hi,
    You need to have the BusinessObjects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP,to access sap objects into BO or Crystal Reports
    Link to download the useru2019s Guide:
    Please go to Http://help.sap.com
    Click on BusinessObjects tab
    Select the product as Integration Kit for SAP
    User guide: BusinessObjects Integration Kit for SAP Useru2019s Guide.
    It will list all the documents for Integration Kit for SAP which will be helpful to you.
    Also if you have any other questions around the SAP Integration Kit for Crystal Reports I recommend to post this query to the Integration Kits - SAP forumThis forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
    you can download the complete documentation from the following link :
    http://support.businessobjects.com/documentation/product_guides/
    Choose "BusinessObjects XI Release 2" for the version and "Integration Kit for SAP" for the Product
    http://www.businessobjects.com/solutions/sap/default.asp
    Also Search ->Expert Forums->Business Objects-->Crystal Reports design
    Regards
    CSM Reddy

  • SAP-CRM - Auto Confirmation of Contract Account from IVRS to SAP-CRM IC Web

    Hello Experts,
    In Our Projects we are Using SAP-CRM Web Client for Call Center Processes. AVAYA is a Third Part agency which have developed the IVR system for handling the Consumer Calls. We have Developed BAPIs which will fetched data from SAP based on Contract Account entered by Consumer on IVRS. AVAYA have developed the CTI Pop-Up also which have several Consumer Details along with CA. Now Client wants that CA , entered by Consumer on IVRS, will be autoconfirm to CRM - Web Client. If anyone have any document for doing all these setting please share with us & Provide us guidelines...
    Regards,
    Abhishek Chopra

    Hello Abhishek.
    You can refer to [Note 707104 - Account identification from attached data|https://service.sap.com/sap/support/notes/707104]. It describes how to set autoconfirmation based on CAD.

Maybe you are looking for