Complete my Album doesn't play the single download as a whole album

I had purchaser the single of the Payphone from iTunes and when the album was released I did a "Complete my Album" purchase of the same Album. iTunes won't play the single when palying the album. It is not shown as being in the album at all, even the track number is omited. How can I get that single to play in order when selecting the Album without creating a special playlist just for this album. I thought when you did a "Complee my album"  it would do just that not omit it from the album and keep the single as a seperate track. Any Ideas or did I do it wrong?

Often, a single released in advance of an album will not have the album title associated with it.  Instead it is listed as a single.  When purchasing the rest of the album, the single is not downloaded again.  To fix it, select the single and type command+I to open the song's information window.  Select the "Info" tab and edit the album name to reflect the actual album title and enter the correct  track number and total number of tracks.  Click "OK" at the bottom right of the window to save your changes.

Similar Messages

  • HT1711 If I bought a song as a single, and then buy the whole album, will I have the single twice?

    If I bought a song as a single, and then buy the whole album, will I have the single twice?

    If you buy a track from an album as opposed to a single (so you are buying the actual track from off the album), then you might be able to do 'complete my album' : http://support.apple.com/kb/HT1849

  • ITunes doesn't play the next song, it just stops after one track.

    I have iTunes 11.0.1. When I play a song in my playlist, I expect the next song to start as the first one ends, but iTunes stops and doesn't play the next song. I'm missing some sort of setting but what?
    It's not a smart playlist, just a playlist of favorite music I've built up over the years.
    Mountain Lion.

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click will select or unselect them all - and you should then have continuous playback.
    Hope this helps.

  • I bought a film on iTunes and whenever I try and play it it says "your computer is not authorised to play this" and so i type my password in and it says "your computer is already authorised" and then doesn't play the film. Can anyone help?

    I bought a film on iTunes and whenever I try and play it it says "your computer is not authorised to play this" and so I type my password in and it says "your computer is already authorised" and then doesn't play the film. Can anyone help?

    ah this is a simple fix. open itunes go to store on the top menu bar and click store. scroll down and click     
    "Authorize this computer" fill in the info requested and there u have it.

  • Itunes doesn't play the video anymore

    Help! ITunes doesn't play the video clips anymore just the sound works.
    I've restarted, quit the other applications but no result.
    What can I do ?
    Thank you for your suggestions.
    ITunes 8.1
    QuickTime 7.6
    Mac OS 10.5.6
    Mac Pro 2x3 GHz
    RAM 8 Go

    If you are playing through remote speakers, iTunes 8.1 will not play the video. Previous versions would play fine using only the computer's speakers, but 8.1 requires the remote airtunes speakers be deselected.

  • How can I play the whole album, when I double click on the album it only plays the first track?

    How can I play all tracks on an album, when I double click on the album it only plays the first track?

    Make sure all the tracks are check-marked.

  • After playing the song I selected in iTunes 11 it jumps to the another album rather than playing the next song on the original album I selected.  ***?  How do I fix this?!?!?

    After playing the song I selected in iTunes 11 it jumps to the another album rather than playing the next song on the original album I selected.  ***?  How do I fix this?!?!?

    I found that clearing the "Up Next" list fixes the problem.  But I have to clear that list everytime I just want to hear just that one album.  Each time I select on song on the album, the "Up Next" list builds it's own list rather than just play through the album.  I think this has something to do with the issue.  How can I fix this?!?!

  • HT204406 I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have reset both devices.

    I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have rest both devices.

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • My ipod touch's speaker where you listen to with your earphones doesn't play the person who is sing

    I have an ipod touch 2 i believe that is which generation.  I have a problem where you put the headphones in..when i put them in they play the background music/ the durms.guitar.etc...but it doesn't play the person who is singing. but when  you  shove it it as hard as you can and hold it ther it will somewhat play the person singing.   What do you think the problem is?

    You probably have a build-up of lint in the earphone receptacle which is preventing the earphone jack from going in all the way. If you can carefully clean this out with, say, a paper clip this may cure your problem.

  • My ipad2 doesn't play the games in the ceebeebies website any ideas, My ipad2 doesn't play the games in the ceebeebies website any ideas

    My ipad2 doesn't play the games in ceebeebies website

    The games are most likely flash-based, and flash is not supported on the iPad. Have you checked to see if any of the games have their own apps in the iTunes app store ?
    Also the Photon Browser says :
    Photon Browser allows you to play Flash games such as free Facebook games, use Flash apps, listen to music streamed via Flash player and watch Flash video.
    As its reviews are mixed it probably doesn't work on all sites

  • Final Cut pro doesn't play the frames

    My final cut pro doesn't play the frames in the application.
    The whole time it works great but at ones this happend.

    Couple of things to check and try.
    1) In Viewer Display options check to see whether Better Performance is checked in the Quality section. If not, check it and that should help you set real time playback with a slight reduction in quality in the Viewer. However, it will not have any affect on your project.
    2) If that doesn't work, consider generating Proxy files by eight clicking clips >Transcode Media. There is also a setting in Viewer Display Options to use Proxy in editing your project. Before you export the finished project, remember to change that setting  back to Original/Optimized.
    3) If that doesn't work, download a speed test and check the throughput of your media drive. It should be a separate drive from your start up disk and should be connected by Thunderbolt (fastest) USN3 (next fastest) or Firewire 800.
    Russ

  • I purchased and downloaded an album, and one of the songs downloaded incomplete.  How do I re-download the song?  It shows as "downloaded" in my purchase history

    I purchased and downloaded an album, and one of the songs downloaded incomplete.  How do I re-download the song?  It shows as "downloaded" in my purchase history

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • My iphone 4 is taking forever to sync...I let it sync all night and only completed about 1/4 of of the songs downloaded. Apps seem to be fine. I have tried restoring it and that didn't do anything. Can someone please help?

    My iphone 4 is taking forever to sync...I let it sync all night and only completed about 1/4 of of the songs downloaded. Apps seem to be fine. I have tried restoring it and that didn't do anything. Can someone please help?

    how many songs are syncing cuz i only have at most 200 or so and it takes a while so it might be how many songs are syncing to the device

  • Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

    Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

    Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
    Uninstall the Flash plugin then reinstall new >  Troubleshoot Flash Player | Mac OS
    Very important to uninstall the currently installed plugin first.
    Now launch Safari and try a video.
    If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
    And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari.
    You may also need to delete the cache associated with Safari .
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy/paste:   ~/Library/Caches/com.apple.Safari
    Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
    Quit and relaunch Safari. Try a video.

  • How come I complete my album but the original single stays separate? What's the point completing the album if I can't then listen to it? Am I doing something wrong? The album was released after the single.

    I have used complete my album a few times and each time the single I bought first - before getting the option to complete - doesn't get listed in the album. It wouldn't matter too much but usually it's the best track! Also for artists like Plan B where there is a narrative to the album you have a piece missing! Is the bottom line that unless I buy the track from the album (rather then the single) then that's how it works? If so there should be some way of fixing it?

    You might be able to do some of this with retaining the original information if you enter it into the sort ___ fields.  Never worked with those myself.

Maybe you are looking for

  • One Ipod 2 Windows User Accounts

    I set the IPOD up under my account. I would like to set the same IPOD up under my wifes account using the same music library. So If I make changes to the library under my account the next time the ipod syncs up under her account she will also get the

  • Handling unit weight into outbound delivery weight?

    Hi, I would like to transfer the total of my Handling unit weight to my outbound delivery weight. This is at this moment copied from the Sales order. How can I change that SAP will use the weights of the HU? Anybody? Thank you, Eric van Zundert. Edit

  • Using sequence in a procedure

    I understand that oracle doesnt allow you to use for example, sequence_name.NextVal in a procedure when adding data. Is there any other ways round this? It would be great if someone could give an example as im a beginner with Oracle. Thanks

  • Aperture and greyscale tif scans

    Hi, I scanned my old black&white pics and manage them in Aperture. But when I want to use the repair tool Aperture turns my pic into a B&W negativ. I use Aperture 2.1. Does anybody has an ideas what is going on? Is it a bug?

  • Word processing for iPad

    have not been able to find an Apple or 3rd party word processing ap for iPad....maybe I am not looking at the right place....can you help.