Complete short text is not appearing in BEX?

Hi Expert's,
I have Field for which there is a routine written. that routine says if xyz = '0001' then 'Customer with high/rate'.like diferent values for '0002','0003' and '0004'.This getting populated in the cube.But when I generate the Report on that cube the texts are getting truncated.
'Customer with hig'.
I am confused why we are not getting full texts for that field in the report?
can any body please help me to resovle this.
points will be definitely assigned.
Thanks,
Ravi

Ravi,
1.Please Change the display to Long Text in the properties of info-object in Query Designer...
2. Also, You may check the length of the info-object in which you are storing this text, may the length of the info-object is less than the length of text you are trying to store in it.
Thanx and Regards
Priyanka
Edited by: Priyanka on Jan 28, 2009 4:57 PM

Similar Messages

Text boxes not appearing - CAPTIVATE1.1

I have a number of delegates using Cap1.1 - on some machines
when recording screens, the automatic text boxes are not appearing
when the recording has finished. (the "text box" option is checked
on all PCs in the custom options settings)
I`m sure i`ve heard this could be something to do with Flash
players - I checked one of the machines that is facing the issue
and its using Flash 9.
any help would be great
cheers

Sorry, I only keep the current version and one version back
due to storage limitations. I would note that there are few things
more difficult than to suggest a correction for an "intermittent"
problem, but I'd have to say an intermittent problem
on a version that was replaced years ago would definitely
qualify as the most difficult of all.
That said, maybe we can offer some help if we knew what the
problem was. You don't really say, except that some text-captions
on some machines are not appearing. That is not really helpful in
troubleshooting.
What is being recorded - exactly?
Where is it being recorded from - Internet, local drive,
etc.?
What are the delegates (what's a delegate?) doing at the time
they expect, but are not getting, automatically-generated
text-captions?
I am relatively certain that the problem (if I understand
that part), has nothing at all to do with the Flash Player version
installed, but beyond that, I'm sorry that all I can offer is
questions instead of answers.
Welcome to the User-to-User forums, hardyandy. Hopefully you
can give us enough additional information that we can take a stab
at helping out.
.

Text Elements not appearing

Hi All,
I created a report and maintained the text elements in English and De languages. For some fields, I maintained the text elements only in English language. So when I login in DE language, the text elements which I had maintained in english language are not appearing. Those fields are blank in the selection screen. Does it needs to be maintained in DE lang? Please assist.
Thanks in advance.
Regards,
VIjay

HI
Yes u need to maintain in DE language also.
If u wnat the same text i.e english text in DE also then use maenu as GOTO.........>TEXT ELEMENTS---->SELECTION TEXT
Now GOTO-------> TRANSALTION giva langauge as DE
and transalte one by one all athe Text element and activate.
YOu can see all the fields in DE login.'
Regards,
Pravin

Delayed text captions not appearing (except in Preview "Play this slide")

Can anyone explain why my delayed text captions are not appearing in any mode BUT Preview/Play this slide. When I do that type of preview, the text captions show up exactly when I set them (starting at 27s - and are set to display for 'rest of slide').
There are eight delayed text captions and none of them show up with I preview the Project, From this slide, or Publish.
The visible flag is on, time is "rest of slide", appear after 27s, effect is not relevant, and it is not a layers issue.
Thank you

Hi Shawn
Belive it or not, I wasn't being sarcastic. Only Buttons, Click Boxes or Text Entry Boxes will pause playback of a slide. So I figured if I asked how many you had, you would scrutinize the slide and perhaps discover one you had missed.
Play this slide doesn't behave like the other preview. This doesn't mean it's bad, just different. You simply have to understand that the only real reason for using that type of preview is to achieve a rough representation of timing elements. When will they appear and disappear. As you have discovered, you may not interact with them. You may only watch them. It's a bit like watching something through a window. You cannot reach through it and touch anything.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Text Functions Not Appearing in PDF (Financial Reports)

In the header of Financial Reports we are using common text functions to create the report titles with POVAlias and related functions. These headers correctly appear when printing or web viewing the reports. However, when viewing or printing to PDF - the header appears blank - the function results are not displayed.

<p>Hi Brianeccher</p><p>We've the same problem. We use the financial reporting studio9.3.0.502. The background color from text boxes do not appear, whenprinting to pdf.</p><div dir="ltr" id="result_box">Did you find a solution?Thanks</div>

Static text is not appearing from the form designer

Hi,
We are using Adobe Live Cycle designer 6.0 to design print forms.
The problem we are facing is, sometimes static text element created on the Body Page of the form does not appear at all(when we open the form designer after creating the Static text element), though we can find the static text in XML Source of the form.
For example, if a text element is created with text "XYZ" on body page, it is not visible on the body page whereas the XML Source contains "XYZ" in it.
What can be the problem ?
Regards,
V Joshi.

Hi Nikhil,
I tried using static text from Standard Library and ISR library too. Still the text disappears when i activate the form.
More inputs on this will be helpful.
Also, we are using the Form Designer Version 6.0 which is in-built component of NWDS 2.0.16 installation.
Regards,
V Joshi.

Service Short Text is not copied creating Req w.r.t Contract

Hi,
When I try to create a req service item with reference to a contract, short text (TXZ01) is not copied from contract to req. The field is open for input and I have to input manually, or I'll get error ME083.
Is here a way to copy short text from contract to req automatically?
Thank you!
Regards,
Jully

Hi,
it could be due to an active user exit like EXIT_SAPLMEREQ_005 or EXIT_SAPLMEQR_001.
Please check your exits.
Regards,
Edit

Group text messages not appearing in messages

I am receiving all one to one text messages on my iPhone and Macbook, but group strings are not appearing on my macbook pro. Am I missing something? I've deleted existing threads from phone, power cycled, and still no joy.

Hi,
I too have the same annoying issue. I have to continuously take out the battery and restart my Q10 in order for my text messages, facebook, and email notifications to come in. This is my second Q10 now as the first one started freezing when I tried sending emails so I thought the Hub problem was related to a faulty phone but now that I have my second one, the same problems are happening (except for the freezing of the phone). It is incredibly frustrating that a phone in this price range has such a basic fault when the main purpose of a mobile phone is to receive phone calls, text messages, and emails!!
I have also found that I have multiple contact details for the same person and that if I try to call someone's mobile that begins with 04 (Australian mobiles) I get told I can't call that number, but if I call a mobile with +61 (Australian country code) I get through to them! The phone also wont save contact details of people who only have a landlines number.
I have been with Blackberry for 6 years now and this is my 4th BB phone. I have always been a staunch advocate of the Blackberry until now. These software issues should not be happening in a high end phone.
Blackberry, please create a fix for these basic issues as soon as possible.
I have a Blackberry Q10; OS version 10.1.0.1910; Build 517312; and Software Update 10.1.0.314
Many thanks

0Equipment - specific equipment not appearing in BEx query

Hi all
We load data to 0equipment. This has been running successfully, no data loading issues. We have various queries associated with this InfoProvider.
The queries are fine and work as designed except that 2 pieces of equipment are not appearing in the analyser.
I can find no issues with the indivudal records - they are in BW (I checked the master data for 0Equipment and they are there). The master data is active.
I thought there might be some restrictions in the query which was causing these records to be omitted, so wrote a new test query on that InfoProvider where I apply no restrictions except on equipment number. I tested this with a piece of equipment that I know works, and the test query returns my data. However, when I run it for the problematic equipment I get 'No data available'. (when I execute the query I am able to select the problematic equipment number from the list of single values).
I'm rather stumped - any suggestions most welcome.
thanks and regards, Lara

run an RSRV test on the infoobject, there may be an issue with the SIDs. or if its a nav attribute could be an issue with the
X Y tables. RSRV should help

Text does not appear stretched in the output

Hi,
I have a requirement to show data as stretched text in the rtf output. I tried it by electing the data field in the rtf template and changed the spacing to 3 point in font tab. But when I preview it, the text appears normal.
Is there something which I am missing? Is stretch text supported in BI templates or not?
Thanks.

The HTML validator finds one problem that might be related:
http://validator.w3.org/check?uri=http://www.historicalfictionbybobturpin.com/upload_test/blog.html
''"Warning: Byte-Order Mark found in UTF-8 File. The Unicode Byte-Order Mark (BOM) in UTF-8 encoded files is known to cause problems for some text editors and older browsers. You may want to consider avoiding its use until it is better supported."''
I'm not sure if this is related or not, but it might be useful information for your programmers. I tested your link on my Linux computer, but I did not see any problem with the page using Firefox 5 or Firefox 6. (Perhaps the problem only affects Firefox on Windows computers.)

I am running Photoshop CC on a Windows 7 Toshiba PC and my text will not appear on the background when I type it.

I am running Photoshop CC on a Toshiba laptop running Windows 7. When ever I try to type text on a background image, the words don't appear. NOW...I had been using it for two or three weeks with no problems whatsoever...but then about 5 days ago, it just quit working. What I type shows up on a the layer pallet on a tab in the lower left corner of the screen, but it just won't show up on the graphic. HELP!!! I'm about ready to cancel my monthly subscription to Photoshop!! I tried to reset my text "T" in the upper right corner, but I think I made things worse.
Can I delete the program from my computer and REdownload it??? I've got things I've GOT to get done and I'm dead in the damn water and I can't seem to get any help. I will tell you up front, I am NOT a computer genius, so any help will be GREATLY appreciated and if you could put it into step by step parts that would GREATLY help me. I appreciate it.

Thanks for the screenshot. You do not have to get rid of CC 2014.
Open your Creative cloud panel, select Previous versions and 14.0 under Photoshop.

Item text is not appearing in the print output through IDOC?

Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
    idoc_data-segnam = 'E1BPMEPOTEXT'.
    e1bpmepotext-po_item = Po line item number .
    e1bpmepotext-text_id = txtid.
    e1bpmepotext-text_form = textform.
    e1bpmepotext-text_line = line item text .
    idoc_data-sdata = e1bpmepotext.
    APPEND idoc_data.
    CLEAR idoc_data.
    CLEAR e1bpmepotext.
please help me it is urgent
Thanks
Venkatesh

Hi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra.

Export to Word, Text does not appear in Word document

I have created a document in Pages which needs a table as part of it. I need to convert it to Word for work but when I use the Export to Word function it creates the Word Doc file but the table is blank - no text in the table at all? (Other text outside of the table is created).
Apart from that the formatting is not as it should be and some text (outside of the table) is incorrectly placed on the Doc file.
My fall back up to now has been to export to pdf (which works perfectly) and email that, but that stops it being edited at work.
Where should I be looking to make sure the text in the table in pages is exported to the Word document?
Or amn I expecting too much?
I am using a retina iMac, Yosemite OSX. Thanks.

Pages v5 (any version) is none of the following:
Word clone
Predictable
Professional/business grade software
Complete
Entirely debugged
Thoroughly documented
Many have, and continue to report export problems with Pages v5. Since we cannot peer over your shoulder as you enter text in a table, or if you tried to make the table behave as if in MS Word, the best bet would be to drop Pages entirely and use MS Word in Office for Mac 2011 (update 14.4.7 or later). Then you will be able to stop gambling with document conversion, work in the native Word .docx format, and recover some lost productivity. Word, not Apple's Pages, is the corporate word processing standard — for a reason.

Item text in not appeared in MIGO

During the posting i fill the field Item text field with some text but after posting the document the value dosen't appear in the field item text.
What is the reason,do we need to maintain some settings for this?
Thank you.

Hi Goh Yen,
I assumed that the field that you referred to is Item text - GOITEM-SGTXT.
This is normally caused due to incorrect coding in the user exit EXIT_SAPMM07M_001. If you are using this user exit please ensure that the segment text is correctly passed back to the calling
program. You can refer to SAP note 133161 for sample of the coding
Please check if the customer exit EXIT_SAPMM07M_001 is activated.
If you don't need or use the exit I suggest you de-activate it.
Hope the information help and good luck !
Thanks and regards,
Kenix

Text Variables Not Appearing Correctly in InCopy

In working on a project I have discovered that the text variables do not properly appear in some of my InCopy assignments. I have tried deleting the assignments and recreating them, synchronizing the variables in the whole book, and checking in and out the assignments in InDesign. None of the approaches I have tried have resolved the issue. Hoping someone in the community may have run across this issue before and knows what I'm missing.
Correct Dates in InDesign Incorrect Dates in InCopy

You can start by running a variable report in Robohelp. Tools > Reports > Variables.
Make sure all your variables are accounted for in the Robohelp project. If not, reimport the files and let Robohelp rebuild everything.
Assuming that your variables are recognized by Robohelp, then in FrameMaker you can try this. Select the heading in question, and then click Heading 1 in your paragraph catalog. Next, while the heading is still highlighted, click Default Font in your character catalog. This should remove any additional character formatting on the variable itself.
Make sure you've mapped styles for paragraphs and character formats in Robohelp. Right-click the referenced FrameMaker book in Robohelp. Click Properties, and then select the Style Settings tab. Click Edit in the Style Mappings area. Select Character Styles in the Style Mapping Type box. You'll want to make sure you've get every FrameMaker style mapped to an acceptable Robohelp style.
That's all I can think of off the top of my head. Hope it helps point you in the right direction.
Jason

Complete short text is not appearing in BEX?

Similar Messages

Maybe you are looking for