Complete step by step procedure to create new material group.

Hi,
Please suggest procedure to create new material group in R/3 system and assigning it to G/l account.
How to reflect it into EBP ssytem.
Many thanks in advance.

Hi,
T. Code: - OMSF
Path: - SPRO >> Logistics u2013 General >> Material Master >> Settings for Key Fields >> Define Material Groups.
Select existing material group and click on Copy As button.
Enter material group code, material group name and long description for material group.
Then click on save button for save material group.
Regards,
Mahesh Wagh

Similar Messages

Creating new Material Group

Hi SAP Gurus,
How to Creating new Material Group?
Regards,

Hi,
Go to OMSF and here click on "New Entries" button and maintain the Material Group and its Description and save.
Config Path: - SPRO > Logistics - General > Material Master > Settings for Key Fields > Define Material Groups

Create New Material Group included in Fiscal Year Range

Hi,
I have Report Maerial Group, Material & for each one having Fiscal Year
I want to create new Material Group XXX and be included in the range of fiscal year K1 & K2
How do I connect these two fiscal year to the new Material Group
Thx

Hi
I hope there is no assignment of GL account to material group. If you want that, you can assign Valuation class to material group in OMQW transaction.
Because of the valuation class, the system can find the assigned G/L account number in OBYC. In this case Transaction Key GBB and General modification VBR.
is it fine for you?
regards
Srinivas
Message was edited by:
Srinivas Ponangi

Create new material group

Hi,
I have report Quantity all material, the etXX is included in the range NXX and
AXX is not assigned.
We would like to create a new product group u201CNEWGR1lu201D and include etXX and AXX .
please give instrauction whay should I check first, then steps to be done
Thx

Hi,
This is not a suitable forum for this query... please check in MM Forum
Regards
Raj

What is procedure for creating new vendor and material master data in ABAP

What is procedure for creating new vendor and material master data in ABAP .

see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE                                           *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
                           NO STANDARD PAGE HEADING
                           MESSAGE-ID ZZ.
                     TABLES
TABLES : SSCRFIELDS.   " Fields on selection screens
                     CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
                     TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
          FLAG TYPE C,               " Update Flag
          LIFNR TYPE LIFNR,           " Vendor Number
          BUKRS TYPE BUKRS,           " Company Code
          KTOKK TYPE KTOKK,           " Account Group
          ANRED TYPE ANRED,           " Title
          NAME1 TYPE NAME1_GP,        " Name1
          NAME2 TYPE NAME2_GP,        " Name2
          SORTL TYPE SORTL,           " Search Term 1
          SORT2 TYPE AD_SORT2UL,      " Search Term 2
          STRAS TYPE STRAS_GP,        " Street
          PSTLZ TYPE PSTLZ,           " Postal Code
          ORT01 TYPE ORT01_GP,        " City
          REGIO TYPE REGIO,           " Region
          LAND1 TYPE LAND1_GP,        " Country
          SPRAS TYPE SPRAS,           " Language
          VBUND TYPE RASSC,           " Trading Partner
          BANKS TYPE BANKS,           " Country
          BANKL TYPE BANKK,           " Bank Key
          BANKN TYPE BANKN,           " Bank Account
          BKONT TYPE BKONT,           " Bank Control Key
          BANKA TYPE BANKA,           " Name of Bank
          AKONT TYPE AKONT,           " Reconciliation Account
          FDGRV TYPE FDGRV,           " Cash Management Group
          ZTERM TYPE DZTERM,          " Payment Terms
          REPRF TYPE REPRF,           " Check Double Invoice
          ZWELS TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
        BEGIN OF TY_VENDOR_EXTEND,
          FLAG TYPE C,               " Update Flag
          LIFNR     TYPE LIFNR,           " Vendor Number
          BUKRS     TYPE BUKRS,           " Company Code
          KTOKK     TYPE KTOKK,           " Account Group
          REF_LIFNR TYPE LIFNR,           " Reference Vendor Number
          REF_BUKRS TYPE BUKRS,           " Reference Company Code
          AKONT     TYPE AKONT,           " Reconciliation Account
          FDGRV     TYPE FDGRV,           " Cash Management Group
          ZTERM     TYPE DZTERM,          " Payment Terms
          REPRF     TYPE REPRF,           " Check Double Invoice
          ZWELS     TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
        BEGIN OF TY_ERROR,
          MSG(200) TYPE C,                " To hold Message
          LIFNR    TYPE LIFNR,            " Vendor Number
          BUKRS    TYPE BUKRS,            " Company Code
        END   OF TY_ERROR.
                     DATA (Simple Fields)
DATA : W_COUNT TYPE I,               " Variable to hold count of Records
       W_SUCC_REC TYPE I,            " No. of Success Records
       W_SUCC_REC1 TYPE I,           " No. of Updated Records
       W_ERR_REC TYPE I,             " No. of Error Records
       w_noupdate_rec type i.        " No. of Records not Changed
                     INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER    TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
       WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
       IT_VENDOR_EXTEND    TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
       WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
       WA_IT_BDCDATA       TYPE BDCDATA,
       IT_BDCDATA          TYPE STANDARD TABLE OF BDCDATA,
       WA_IT_MESSTAB       TYPE BDCMSGCOLL,
       IT_MESSTAB          TYPE STANDARD TABLE OF BDCMSGCOLL,
       IT_ERROR            TYPE STANDARD TABLE OF TY_ERROR,
       WA_IT_ERROR         TYPE TY_ERROR,
       it_error_fk01       type standard table of ty_error,
       wa_it_error_fk01    type ty_error,
       it_error_fk02       type standard table of ty_error,
       wa_it_error_fk02    type ty_error,
       it_succ_rec1        type standard table of ty_error,
       wa_it_succ_rec1     type ty_error,
       it_noupdate         type standard table of ty_error,
       wa_it_noupdate      type ty_error.
                     FLAGS
DATA : FL_FLAG1 TYPE C,          " Flag to check error upload file
       FL_FLAG2 TYPE C,          " Flag to hold value
       FL_FLAG3 TYPE C,          " Flag to hold value
       FL_FLAG4 TYPE C.          " Flag to hold value
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-001,
            POSITION POS_LOW.
PARAMETERS :       P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-002,
            POSITION POS_LOW.
PARAMETERS :       P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-003,
            POSITION POS_LOW.
PARAMETERS :       P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-004,
            POSITION POS_LOW.
PARAMETERS :       P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-005,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-016,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
                     AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
                     START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM INSERT_VENDOR_MASTER_DATA.
    ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
    ENDIF.
ENDIF.
                     END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O01.           " Total Number of records read :
    FORMAT COLOR OFF.
    WRITE:40 W_COUNT.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O02.           " Total Number of Success records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O07.           " Total Number of Updated records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC1.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O08.           " Total Number of Unchanged records :
    FORMAT COLOR OFF.
    WRITE:40 W_noupdate_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O03.           " Total Number of Error records :
    FORMAT COLOR OFF.
    WRITE:40 W_ERR_REC.
    if not it_succ_rec1 is initial.
      skip 1.
      perform display_changed_report.
    endif.
    if not it_noupdate is initial.
      skip 1.
      perform display_nochange_report.
    endif.
    IF NOT IT_ERROR IS INITIAL.
      SKIP 3.
Form to display error data
      PERFORM DISPLAY_ERROR_REPORT.
    ENDIF.
    IF FL_FLAG2 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O04.        " BDC Session Name for Creation (FK01) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP.
      perform display_error_report_fk01.
    ENDIF.
    IF FL_FLAG3 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O09.        " BDC Session Name for Updation (FK02) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP1.
      perform display_error_report_fk02.
    ENDIF.
ENDIF.
*&      Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = ' '
    IMPORTING
      FILE_NAME     = P_FILE.
ENDFORM.                    " GET_FILE_PATH
*&      Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E001(ZZ) WITH TEXT-011.
    " Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
    MESSAGE E001(ZZ) WITH TEXT-012.
    " Session Mode should be either A or N or E
ENDIF.
ENDFORM.                    " VALIDATE_DATA
*&      Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
         L_FILETYPE TYPE CHAR10 VALUE 'ASC',
         L_HEADER_LENGTH TYPE I VALUE 0,
         L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = L_FILENAME
      FILETYPE                = L_FILETYPE
      HEADER_LENGTH           = L_HEADER_LENGTH
      READ_BY_LINE            = L_READ_BY_LINE
      HAS_FIELD_SEPARATOR     = C_SPLIT
    TABLES
      DATA_TAB                = P_IT_VENDOR
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
   MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
    MESSAGE I001(ZZ) WITH TEXT-014.   " Uploaded File contains no data
    FL_FLAG1 = 'X'.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_MASTER-LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
    if wa_it_vendor_master-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
           AND   BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    IF SY-SUBRC EQ 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_ERROR-MSG   = TEXT-015.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION.
    ENDIF.
    CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION_FK02.
      CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-018.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
    endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " INSERT_VENDOR_MASTER_DATA
*&      Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_MASTER-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
    WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
    WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '=MALL',
           BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-D0110' 'X',
           BDC_FIELD USING 'RF02K-D0120' 'X',
           BDC_FIELD USING 'RF02K-D0130' 'X',
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'RF02K-D0220' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
           BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
           BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
           BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
           BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
           BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
           BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
           BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
           BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
           BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
           BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0120',
           BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
           BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
           BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
           BDC_FIELD USING 'BDC_OKCODE' '=BANK',
           BDC_DYNPRO USING 'SAPLBANK' '0100',
           BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_MASTER
*&      Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
                       DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO   = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_DYNPRO
*&      Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
                      FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_FIELD
*&      Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
    IF FL_FLAG2 NE 'X'.
      PERFORM OPEN_BDC_SESSION.
      FL_FLAG2 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
ENDFORM.                    " OPEN_BDC_SESSION
*&      Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK01'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM.                    " BDC_INSERT
*&      Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk01-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
    CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-010.             " Unable to Close BDC Session
ENDIF.
ENDFORM.                    " CLOSE_BDC_SESSION
*&      Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
    if wa_it_vendor_extend-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
           AND   BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
    IF SY-SUBRC NE 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
      WA_IT_ERROR-MSG   = TEXT-007.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT = WA_IT_VENDOR_EXTEND-LIFNR
        IMPORTING
          OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
      SELECT SINGLE LIFNR
             FROM LFB1
             INTO L_LIFNR
             WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
             AND   BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
      IF SY-SUBRC EQ 0.
        WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
        WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        WA_IT_ERROR-MSG   = TEXT-015.
        APPEND WA_IT_ERROR TO IT_ERROR.
        W_ERR_REC = W_ERR_REC + 1.
        CLEAR : WA_IT_ERROR, L_LIFNR.
      ELSE.
        REFRESH IT_BDCDATA.
        CLEAR IT_BDCDATA.
        PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
        PERFORM CALL_TRANSACTION.
      ENDIF.
    ENDIF.
    CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_extend.
      PERFORM CALL_TRANSACTION_FK02.
       CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-019.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
    endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " CHK_AND_INS_VENDOR_EXTEND_DATA
*&      Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_EXTEND-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
    WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
    WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
           BDC_FIELD USING 'RF02K-REF_LIFNR'
                                      WA_IT_VENDOR_EXTEND-REF_LIFNR,
           BDC_FIELD USING 'RF02K-REF_BUKRS'
                                      WA_IT_VENDOR_EXTEND-REF_BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_EXTEND
*&      Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.            " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.            " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H03,              " Error Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC1 = W_SUCC_REC1 + 1.
    WA_IT_succ_rec1-MSG = Text-017.
    IF P_VENMAS = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
    IF FL_FLAG3 NE 'X'.
      PERFORM OPEN_BDC_SESSION_fk02.
      FL_FLAG3 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT_fk02.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform.                    " CALL_TRANSACTION_FK02
*&      Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
endform.                    " OPEN_BDC_SESSION_fk02
*&      Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK02'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
endform.                    " BDC_INSERT_fk02
*&      Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O10.          " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O11.          " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_succ_rec1-LIFNR,
           17 SY-VLINE,
           18 WA_IT_succ_rec1-BUKRS,
           31 SY-VLINE,
           32 WA_IT_succ_rec1-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_succ_rec1.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_changed_report
*&      Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O12.       " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O13.       " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_noupdate-LIFNR,
           17 SY-VLINE,
           18 WA_IT_noupdate-BUKRS,
           31 SY-VLINE,
           32 WA_IT_noupdate-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_noupdate.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_nochange_report
*&      Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk02-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
    CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform.                    " ERROR_RECORD_DATA1
*&      Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.     " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.     " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR_fk01-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR_fk01-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR_fk01-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR_fk01.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_error_report_fk01
*&      Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O14.     " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O15.     " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number

Procedure for creating new Org Value

Hi
Can any one tell me the procedure for creating new Org Value
thanks,
Ssssssss

Hi Sun...
Use PFCG_ORGFIELD_CREATE program and refer SAP Note 323817
Check out this thread....
Converting Field to Org level
regards,
Zaheer

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Create new purchasing group

Hi expert,
please guide me how to create new purchase group for company code 0122, purchase org 0233.What else need to be set up in config in terms of functionality? guide me step by step with detail path and tcode.
Thanks

Hi,
Folow this path
SPRO-> Materials Management> Purchasing-> Create Purchasing Groups-->execute>New entries>enter 3 digit Purchasing group, Description and other detail if required and save.
This purchasing group we have to assign to Material master in Purchasing view .
Main purpose of Purchasing group is as below
Purchasing Group
     Key for a buyer or a group of buyers, who is/are responsible for certain
     purchasing activities.
Use
     o   Internally, the purchasing group is responsible for the procurement
         of a material or a class of materials.
     o   Externally, it is the medium through which contacts with the vendor
         are maintained.
Hope this will help you.
Thanks
Krishna

Creating New Material Type

Hi,
While creating new material types what things should be taken in to consideration?
If i want to create it by using copy function which ref. material type we should select and why?.e.g. ZSCRAP- Scrap Material

Dear Ashutosh ,
Grouping of Material that have same basic properties can be assigned to one material type.
While creating new material types following points to be considered as material type controls following things,
1) Material is intended for certain purpose ( For ex consumption)
2) Whether material Number to be assigned internally or externally
3) Number range intervals
4) Screen sequence & which screens to be appeared
5)Which user data can be entered
6) Which procurement type ( Internal or external)
7) Inventory management i.e. value & qty update required..
You can also change material type for a material under following conditions.
1) Old & new material type must be assigned to same account category,
OR
2) No. open PO ,stocks or reservations
I hope this will clarify your doubts,If found useful please reward points
Vivek Maitra

How to understand Note1305698 creating new material batch masters data

Hi, Expert:
In note 1305698 have below description：
When creating new material masters for materials subject to batch management and using
classified batches, it is not possible to create the first batch record in the EWM system. This
means that, for a material, the first batch is always created in the EWM system and must be
transferred to the EWM system because this creates the connection between material and class.
I confused by this statement.
The first batch record should be created in which system, ERP or EWM?
The first batch is always created in which system, ERP or EWM？
BR.

Hi,
sorry, that is a typo in the english translation of the note. The original german says: "Dies bedeutet, dass zu einem Material die erste Charge jeweils immer auf ERP-Seite angelegt und an das EWM-System übertragen werden muss, da hierdurch die Verbindung zwischen Material und Klasse angelegt wird."
(now translated from me): This means that, for a material, the first batch is always created in the ERP system and must be transferred to the EWM system because this creates the connection between material and class.
I will ask for a correction.
Best regards
Juergen

Field Ref. and SRef,mat type when creating new material types

Hi,
While creating new material type we are giving the Filed ref. on that basis sytem find which fields are option mand. etc. below the filed ref. there is also SRef for material type , why this fileld is use ? if this is screen sequence ref. then what is use of industry sector when creating material bcoz industry sector also determines the scrren ref. then which will follow when we creat the material.
regards,
zafar

Hi,
SRef is the Screen reference .
You have to create the Sref then it should assign depending on the transaction.
Grouping of transactions that determines what screens are displayed depending on the transaction when you maintain material master records. It also determines the order in which the screens appear.
The screen reference Transaction is in table T130M.
In material master the first reference is industry sector,then specific to the industry sector what is the material type & screen sequence.
Regards,
Raj

ERROR :APP-PER-289381 While Creating New Business Group

Hello,
When i am creating new business group in new fresh implementation i am find this error.
APP-PER-289381: A business group with this name exists. Please enter a different name.
I have only Default business group: 'Setup Business group'
Please can any provide a solution for this.. Your early response will highly appreciated.
Thanks
Mohsin

Hi Mohsin,
whatever name you are trying just run the below query to check if it already exists or not.
select * from apps.per_business_groups where name = 'Give here the name you are tyring'
If this returns any row means name already exist in deed. You can rename the existing business group and then create new on. However, if name doesnt exist, wait for any other reply in the forum.
Thanks,
Avinash

UWL - Subsitution rules: create new tasks group

Hi all,
When creating new substitution rules in UWL, we can choose between three task groups (All, Disciplinary, Professional).
Is it possible to create new task grouping, and so, group task by task type/ID ? How can I define new grouping?
Thanks a lot in advance,
Cheers,
Olivier
Solved.
Edited by: Olivier Gaspard on Aug 26, 2009 12:35 PM

This can be achieved by maintaining task classes and assigning substitution profiles to task classes as per your needs.
Then you can assign the required tasks to the task classes.
There is a very well explained document on this scenario.
Check this document to achieve what you are looking for:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109d2ea2-035c-2c10-06be-f6165ba7af11?QuickLink=index&overridelayout=true
Hope it helps !!
Thanks,
Shanti

To change charging account upon creating new emp group

Dear experts,
Our company want to create new emp group.I have problem to understand concept of employee grouping
account determination.
1. How do I know the new emp group that i created goes to what emp grouping.
2. If I want to change to new grouping, what should I do
3. How to check whether the emp grouping that I created goes to the coorect emp grouping
I'm quite worry if i'm make mistake during creating new em group.
Thanks in advance

if your Question is related to posting
Than try to configure the Symbolic accounts as per the ESG for more info read the documentation and use of the feature PPMOD
or else if you are looking at for the Groupings of EG and ESG
SM30 , V_503_ALL
After cofigureing you will be haveing Testing or UAT right so not a problem with any Errors or issues

Creating new shipping group?

Hi,
I have created new shipping group.i intialized that in shipping group container service.when i am displaying shipping group values in jsp page.i am getting error like*"shipping group contains no item relationships"* instead of commerce item values for my new shipping group.
why am i getting this .
can anybody help this..
thanks in advance

By default order creates a hardgood shipping group . When a CommerceItem is added to the Order, that item is automatically a part of the default ShippingGroup because it is assumed that when there is only one ShippingGroup, all items are a part of that group. However, once a second ShippingGroup is added to the Order, the existing CommerceItem and any new commerce items must be explicitly assigned to one of the two shipping groups; any items that were in the default ShippingGroup are no longer a part of any ShippingGroup.
For further reference
http://docs.oracle.com/cd/E23507_01/Platform.20073/ATGCommProgGuide/html/s0805assigningitemstoshippinggroups01.html

Complete step by step procedure to create new material group.

Similar Messages

Maybe you are looking for