Complete tasks using the outlook integration

I left a "send email" pending created directly on the CRM, then a user sends an email using the outlook plugin and creates a new completed task with the same subject.
Is possible to link both task?
thanks

Hayden,
I don't think there are any documentation available for this task. So the answer would probably be no.
Thanks,
Gordon

Similar Messages

Using SDK to add functionality to the Outlook Integration Quotation process

Does anyone know if it's possible, using the SDK, to change the functionality of the Outlook Integration Quotation Process?
I'm wanting to add a few extra fields and a few other things for example.
Many thanks
Hayden

Hayden,
I don't think there are any documentation available for this task. So the answer would probably be no.
Thanks,
Gordon

Can Lightning pin a completed task to the day completed on the calendar so it always shows up if I click on the day?

This may be already doable, but I don't know how. It would be convenient to show completed tasks pinned to the calendar day completed. I know that if you switch to the task mode, the completed tasks and the date completed is displayed, but it would enhance the operation, if these completed tasks were displayed in the task panel whenever I highlighted the completion date on the calendar when in the calendar mode.

Hi Big_T,
I am not sure, this is what I found about how to use Lightning [https://support.mozilla.org/en-US/kb/lightning-user-interface] and it sounds like you could add more to that article. If you would like please add to the article what you find, because I am sure others would love to know how to do this too!
Actually you can do this!
# Go to View
# Go to Calender
# then go to Current View
# Tasks in View and select show completed Tasks
I knew it was there somewhere.

BB desktop deletes completed tasks on the handheld?

It does this when I have marked them as completed in Outlook 2003. I would prefer to keep them on the handheld and just hide them as completed tasks. Can I do this and what setting do I adjust? It appears to only be deleting them from the handheld; not Outlook. At least that is what it says in the 'Details for Confirm Tasks Edits dialog box.'
I have Conflicts set to Notify, but it doesn't tell me it is going to delete these completed tasks from the handheld until I am in the 'Confirm Tasks Edits' and 'Details for Confirm Tasks Edits dialog box.'
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.
Solved!
Go to Solution.

Oh ok, I thought you were on a BES and the tasks synced wirelessly. So you're syncing through Desktop Manager then...
Well I just tried a wired sync. My completed tasks transfer over fine. When you go to the Task synchronization settings in the Desktop Manager, it is set to sync with Outlook with a Two-way sync and also to transfer all items?
Message Edited by jmrmb80 on 02-25-2009 11:31 PM
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

How to use a multiple boards (6321/6323) analogical acquisition task with simultaneous analogical generation task using the same boards (Labwindows CVI10)

Subject : it seems impossible to run a multiple boards analogical acquisition task with one or several analogical generation task using the same boards.
NI Configuration : Dev1 = Dev2 = 6321 boards
Development environnement : LabWindows CVI 10
Source code for analogical acquisitino task :
       DAQmxCreateTask("",&AIRecordingtaskHandle);
       DAQmxCreateAIVoltageChan(AIRecordingtaskHandle,chan,"",DAQmx_Val_NRSE,min,max,DAQmx_Val_Volts,NULL);
       DAQmxCfgSampClkTiming (AIRecordingtaskHandle, "", rate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, sampsPerChan);
       DAQmxGetTaskAttribute(AIRecordingtaskHandle,DAQmx_Task_NumChans,&gNumChannels);
Chan = "Dev1/ai0, Dev1/ai1, Dev1/ai2, Dev2/ai1"
Source code for analogical generation taskS :
       DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C1_DAC0));
       DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C1_DAC0, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev1/ao0
       DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C1_DAC1));
       DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C1_DAC1, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev1/ao1
       DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C2_DAC0));
       DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C2_DAC0, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev2/ao0
At the first DAQmxReadBinary call attempt, the system shows an error (see attached document)
What we understand about that error : it is impossible to run the two set of tasks (ai and ao) using ressources from both Dev1 and Dev2 in the set of tasks because it is not allowed to use the same Reference Clock for that.
The question is : is there a way to to that without having that kind of message?
We tried different combinations :
- Using only one ao task (on Dev1/Dac0) : same error
- Not using any ao task (only the ai task) : no error
- configuring the ai task with only channel from Dev1 : no error
- Using "/Dev1/ai/SampleClock" as internal clock for the ai task and "/Devk/ao/SampleClock" for each ao task (k standing for "1" or "2" depending of the ao task we consider) : error
Thanks a lot.
Pièces jointes :
MsgErreur NIDAQmx.JPG ‏38 KB

doublon
Valentin
Certified TestStand Architect
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, I can't use outlook else where, is there any way I can reset the settings in order to be able to use outlook every where?

I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, outlook won't work out of office, is there any way I can reset the settings in order to be able to use outlook every where?

I can see my folders by clicking the X next to my name on the Inbox Folder. So I have my folders now, just cannot see them in the left colum or see multiple windows on Outlook. At this point, I can use the folders, just with limited functionality. Thanks -Gina

I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.

I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.

Restore from your iTune backup.

MSSTV001 - Delegating tasks using the team viewer iview.

We are setting up a proxy so that our highest level mangers will not have to do their own compensation planning through MSS. We found the user exit MSSTV001 to use for this purpose. Does anyone have experience in using this user exit?
I am looking for examples of code entered into: EXIT_SAPLHRWPC_TO_REMOTE_001 and EXIT_SAPLHRWPC_TO_REMOTE_002.
Any other helpful information is appreciated. I already have a sheet from SAP Online help that gives me a few details on what to do. It is called: Delegating tasks using the team viewer iview.
Points will be rewarded for any helpful answers.
Thanks,
Sara

Hi Gabriel,
Requirement 1
Thanks. I did so. Using this I can see the OrgUnit. However, this is the OrgUnit of MSS user. It remains same through out the program. It is unlike pernr which changes as the user clicks on different Employees.
My exact requirement is as below:
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Structure". Here organization structure will be displayed. Now the user will expand Org Structure. I want to know the Org Unit of different Organization as the user will go on expanding the Org Structure using the buttons
Requirement 2
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Unit". Now we can see the Go button. I have to write some code on the button. Where I can find the code for the button. I spent lot of time. I am not able to find out the exact place where the view for the button is located.
Please help.
Regards,
Gary

Adding e-mails to Adobe Portfolio using the Outlook Plug-in

I support a user here who is asking if it is possible to add additional emails to an Adobe
portfolio using the Outlook Plug-in. The user initially creates a portfolio of emails using the plug in, but would then like to add further emails to the portfolio (e.g. from other subfolders in Outlook, etc.). Is this possible, and, if so, how is it accomplished?

Outlook 2013 (and for that matter Office 2013) are supported by Acrobat 11, not Acrobat 10 which was released well before Office 2013 was released.
- Dov

How can isend use the outlook express to send,receive in our java program

hello guys.
i want to use the outlook express in my java program because it is already built. so we need not write the every feature. does any body know it(how to do it). please i want source code.
any reply will be appreciated greatly

Hi,
When I execute the command like "Runtime.getRuntime().exec("cmd /c start mailto:[email protected]?subject=Test&body=Hello");" in my java program,There is no boby in my outlook window .could you give me some suggestion? Thank you very much!
source:
import java.io.IOException;
public class TestAutoSendEMail {
     public static void main(String[] args) {
          try {
               Runtime.getRuntime().exec("cmd /c start mailto:[email protected]?subject=Test&body=Hello");
     catch (IOException ex) {
     System.out.println(ex.getMessage());
}

Implementing a relational task database with recurrence using the Outlook 2013 calendar

Hello,<o:p></o:p>
I am looking to implement a relational task database whereby recurring tasks are instantiated at fixed frequencies. I have a number of custom attributes that I want to assign to all tasks in
this database. Outlook/Exchange seem like they may not provide the ability to customise attributes in a powerful enough way for this purpose. However, Outlook/Exchange have powerful recurrence logic which I would like to avoid re-writing. I was wondering if
you might have any suggestions for where to look for either a third party task database product that provides recurrence or whether you think this could be sensibly built into
the Outlook/Exchange environment. Also, we are heavy users of MS CRM, so, ideally, the solution would reside there. However, unfortunately, MS CRM does not seem to have a powerful recurrence engine like Outlook/Exchange do.<o:p></o:p>
Many thanks.<o:p></o:p>
Keith<o:p></o:p>
R K Howard

Good Idea. But I'm afraid there is no build-in function in Outlook/Exchange environment so far. Have you considered the solution from Microsoft Dynamics ?
http://www.microsoft.com/en-us/dynamics/default.aspx
Tony Chen
TechNet Community Support

Does the Outlook Integration Standalone add-on work over HTTPS?

We have a customer who is using MS CRM over HTTPS for out of the network access to Outlook and MS CRM within Outlook.
Does anyone know whether the SAP Outlook Integration Standalone add-on for 2007A will operate (sync/save email as activity etc) using a HTTPS connection?
Many Thanks
Brodie

Dear Brodie,
SAP Business One Outlook Integration (Standalone) needs to have Microsoft Outlook installed on the workstation.
Refer to [http://service.sap.com/smb/sbo/documentation|http://service.sap.com/smb/sbo/documentation].
So if the locally installed Microsoft Outlook is able to connect to (for excample) an Exchange Server in order to sync its own emails, then its no problem for Outlook Integration too.
By the way:
I think it was originally developed for Sales persons, who are visiting their customers, but either no or very limited bandwith is available in order to connect to any network outside the local Intranet. These Sales persons does not need to have a SAP Business One client installed on their laptop, but only the Standalone version of Outlook Integration (OI) and Microsoft Outlook itself.
So far as I can see the aim of OI is beeing able to work without any network access when onsite.
Kind regards
Mario Schoenberg
Senior Support Consultant
SAP Business One Forums Team
Edited by: Mario Schoenberg on Jan 5, 2009 3:20 PM

HT201320 Unable to step my outlook account keep getting warning unable to verify account I can send and receive mail on my iMac using the outlook account HELP

Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.

Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

Programmatically deleting task using the TaskService

Hi all,
I was trying to programmatically delete a task (logical delete) using the task service, but it states a security issue concernig the permitted actions of the user who creates the context. does anybody knows which is the recommended solution in order to handle this problem?
Kind regards,

If you authenticate as the admin user (weblogic) you should be able to perform the delete operation. The API allows you to authenticate as the admin in one context, then construct a user context on behalf of a normal user and act as that user. The context being used for the call must have the appropriate permissions to perform the delete.
Take a look at this post, it may be of some help:
Re: PAPI and weblogic security

How can I use the Outlook 2010 social connector to connect to a Sharepoint 2013 mysite?

Hello Forumfriends!
We have recently (like, last Weekend) migrated our Sharepoint 2010 Farm to SharePoint 2013 and we have started using mysites.
Now, there is a nice featur in Outlook 2010, the social connector. This connector connects nicely to SharePoint 2010 mysite (it does, I have tested myself).
Unfortunately, I seem to be unable to connect to my new SharePoint 2013 mysite with my Outlook 2010 Client.
Can anyone help me with this?
In SharePoint 2010 I configured the social connector using the URL
http://mysitehost/my. When I do the same with my SharePoint 2013 mysite it says "Could not connect to Server"
We are not using Office 365 and no, we will not rollout Outlook 2013.
Regards,
Jack

Hi Jack,
According to your description, my understanding is that you could use Outlook 2010 social connector to connect a SharePoint 2013 MySite.
The OSC makes Outlook 2010 a social networking tool by connecting to the new social experiences in SharePoint 2010. That connection allows the OSC to download activity feeds for colleagues and display them inside the new People Pane.
When using Outlook 2013 Social Connector connecting to SharePoint 2013, Outlook calls /_layouts/15/ActivityFeed.aspx with parameter (destination user email) to sync updates. However, it is likely that Outlook 2010 cannot recognize SharePoint 2013 newsfeed.
So, for solving your issue, I suggest you use Outlook 2013 Social Connector to connect a SharePoint 2013 MySite.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Complete tasks using the outlook integration

Similar Messages

Maybe you are looking for