Complete web service message not showing next operation

Hi,
When sending Xchange complete message, the response shows the next operation. But when using web service for complete the response shows the next queue operation as the same as I have done complete for. Have anybody seen this before and know a solution? I have tested both in 5.2 and 6.0
<PRODUCTION_REQUEST>
   <COMPLETE>
      <SFC_LIST>
         <SFC>
            <SITE>KRHALL</SITE>
            <ID>SE11410000</ID>
            <RESOURCE>X-LINE</RESOURCE>
            <OPERATION>SM2</OPERATION>
            <USER>JONORD</USER>
         </SFC>
      </SFC_LIST>
   </COMPLETE>
</PRODUCTION_REQUEST>
<PRODUCTION_RESPONSE>
<COMPLETE>
    <SFC_LIST>
      <SFC>
        <ID>SE11410000</ID>
        <ITEM>3EST000215-9384</ITEM>
        <ROUTER>3EST000215-9384</ROUTER>
       <STEP_ID>021</STEP_ID>
       <REWORK>false</REWORK>
       <QTY>1</QTY>
       <TIMES_PROCESSED>1</TIMES_PROCESSED>
       <STEP_COMPLETED>true</STEP_COMPLETED>
       <DONE>false</DONE>
       <DATE_TIME>2012-02-22T14:59:19.320Z</DATE_TIME>
      <QUEUED_STEPS>
         <QUEUED_STEP>
           <ROUTER>3EST000215-9384</ROUTER>
           <STEP_ID>030</STEP_ID>
           <OPERATION>AOI</OPERATION>
        </QUEUED_STEP>
     </QUEUED_STEPS>
   </SFC>
</SFC_LIST>
</COMPLETE>
</PRODUCTION_RESPONSE>
     <me:CompleteRequest_sync>
         <me:CompleteRequest>
            <me:SiteRef>
               <me:Site>KRHALL</me:Site>
            </me:SiteRef>
            <!1 or more repetitions:>
            <me:SfcRequest>
               <me:SfcRef>
                  <!You may enter the following 2 items in any order>
                  <me:Sfc>SE1141000A</me:Sfc>
               </me:SfcRef>
               <me:ResourceRef>
                  <!You may enter the following 2 items in any order>
                  <me:Resource>X-LINE</me:Resource>
               </me:ResourceRef>
               <me:OperationRef>
                  <!You may enter the following 3 items in any order>
                   <me:Operation>SM2</me:Operation>
                  <me:Revision>#</me:Revision>
               </me:OperationRef>
               <me:UserRef>
                  <!You may enter the following 2 items in any order>
                  <me:UserId>JONORD</me:UserId>
               </me:UserRef>
            </me:SfcRequest>
         </me:CompleteRequest>
      </me:CompleteRequest_sync>
         <ns2:CompleteResponse>
            <ns2:SfcResponse>
               <ns2:DateTime>2012-02-22T16:45:22.319+01:00</ns2:DateTime>
               <ns2:Done>false</ns2:Done>
               <ns2:ItemRef>
                  <ns2:Item>3EST000215-9384</ns2:Item>
                  <ns2:Revision>03</ns2:Revision>
                  <ns2:SiteRef>
                     <ns2:Site>KRHALL</ns2:Site>
                  </ns2:SiteRef>
               </ns2:ItemRef>
               <ns2:Quantity>1</ns2:Quantity>
               <ns2:QueuedStep>
                  <ns2:OperationRef>
                     <ns2:SiteRef>
                        <ns2:Site>KRHALL</ns2:Site>
                     </ns2:SiteRef>
                     <ns2:Operation>SM2</ns2:Operation>
                     <ns2:Revision>1</ns2:Revision>
                  </ns2:OperationRef>
                  <ns2:RouterRef>
                     <ns2:SiteRef>
                        <ns2:Site>KRHALL</ns2:Site>
                     </ns2:SiteRef>
                     <ns2:Router>3EST000215-9384</ns2:Router>
                     <ns2:Revision>03-02</ns2:Revision>
                     <ns2:RouterType>U</ns2:RouterType>
                  </ns2:RouterRef>
                  <ns2:StepId>021</ns2:StepId>
               </ns2:QueuedStep>
               <ns2:Rework>false</ns2:Rework>
               <ns2:RouterRef>
                  <ns2:SiteRef>
                     <ns2:Site>KRHALL</ns2:Site>
                  </ns2:SiteRef>
                  <ns2:Router>3EST000215-9384</ns2:Router>
                  <ns2:Revision>03-02</ns2:Revision>
                  <ns2:RouterType>U</ns2:RouterType>
               </ns2:RouterRef>
               <ns2:SfcRef>
                  <ns2:Sfc>SE1141000A</ns2:Sfc>
                  <ns2:SiteRef>
                     <ns2:Site>KRHALL</ns2:Site>
                  </ns2:SiteRef>
               </ns2:SfcRef>
               <ns2:StepCompleted>true</ns2:StepCompleted>
               <ns2:StepId>021</ns2:StepId>
               <ns2:TimesProcessed>1</ns2:TimesProcessed>
            </ns2:SfcResponse>
         </ns2:CompleteResponse>

Hi,
I have now raised a ticket for this issue.
Br,
Johan

Similar Messages

Web Services do not show up in the console

I am using WebLogic 10.3 on Ubuntu. I have an application that has some web services using JAX-WS. I can deploy these on weblogic and they work fine (I can create a client app to call them). However, I do not see these services from the WebLogic console when I click on the deployments link.
I can create a new web application using IntelliJ that has JAX-WS web services. This app has one class, web.xml and sun-jaxws.xml. When this is deployed, the web service shows up in the Weblogic console under "Modules and Components". I have looked at the differences between the two applications and I do not see any.
Is there any trick to get the Web Services to display in the Weblogic console?
Thanks

You're welcome

WSUS not working completely, no MMC connect, all web services are not working

Hello all,
I have a problem not sure what causing it or what is the source of it as I am not into WSUS that much...
THe status is as follows:
I have 1 server 2008 sp2 RTM x64, I had WSUS 3.0 SP2 on it since a while, it was working fine until a week ago, when I started receiving the below messages in the event viewer
I have spent too much time trying to trace or troubleshoot this issue, but all I got was to check the registry and check permissions on the temp folder and other folders, I have done complete removal with the database for the old WSUS and reinstalled it
again but I got the same problem
Nothing strange and no problems happened on the server perior to this issue, it just happened...
Any help will be appreciated
Regards
============== MSG 1 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:52:54 PM
Event ID:      7053
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact
your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">7053</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:52:54.000Z" />
    <EventRecordID>884368</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission
please contact your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()</Data>
</EventData>
</Event>
============== MSG 2 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      13051
Task Category: 6
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
No client computers have ever contacted the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">13051</EventID>
    <Level>3</Level>
    <Task>6</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884373</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>No client computers have ever contacted the server.</Data>
</EventData>
</Event>
============== MSG 3 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12002
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Reporting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12002</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884374</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Reporting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 4 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12012
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The API Remoting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12012</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884375</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The API Remoting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 5 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12032
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Server Synchronization Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12032</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884376</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Server Synchronization Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 6 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12022
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Client Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12022</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884377</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Client Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 7 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12042
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The SimpleAuth Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12042</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884378</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The SimpleAuth Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 8 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12052
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The DSS Authentication Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12052</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOAMIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The DSS Authentication Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 9 ==============
Log Name:      Application
Source:        ASP.NET 2.0.50727.0
Date:          9/21/2011 1:53:09 PM
Event ID:      1314
Task Category: Web Event
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
Event code: 4010
Event message: An unhandled security exception has occurred.
Event time: 9/21/2011 1:53:09 PM
Event time (UTC): 9/21/2011 10:53:09 AM
Event ID: 11b96ca285fa46d2a05d38e2e9b168af
Event sequence: 1
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820
    Trust level: High
    Application Virtual Path: /ApiRemoting30
    Application Path: C:\Program Files\Update Services\WebServices\ApiRemoting30\
    Machine name: APP-SVR
Process information:
    Process ID: 8332
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Request information:
    Request URL:
http://app-svr:8530/ApiRemoting30/WebService.asmx
    Request path: /ApiRemoting30/WebService.asmx
    User host address: 192.168.5.22
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 2.0.50727.0" />
    <EventID Qualifiers="16384">1314</EventID>
    <Level>4</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:09.000Z" />
    <EventRecordID>884380</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>4010</Data>
    <Data>An unhandled security exception has occurred.</Data>
    <Data>9/21/2011 1:53:09 PM</Data>
    <Data>9/21/2011 10:53:09 AM</Data>
    <Data>11b96ca285fa46d2a05d38e2e9b168af</Data>
    <Data>1</Data>
    <Data>1</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820</Data>
    <Data>High</Data>
    <Data>/ApiRemoting30</Data>
    <Data>C:\Program Files\Update Services\WebServices\ApiRemoting30\</Data>
    <Data>APP-SVR</Data>
    <Data>
    </Data>
    <Data>8332</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>http://app-svr:8530/ApiRemoting30/WebService.asmx</Data>
    <Data>/ApiRemoting30/WebService.asmx</Data>
    <Data>192.168.5.22</Data>
    <Data>
    </Data>
    <Data>False</Data>
    <Data>
    </Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
</EventData>
</Event>
Saleh Ramadan

So, in reality, this issue has nothing at all to do with "it was working; now it is not", because you've destroyed all of the evidence that would exist in a "was working; now is not" scenario. What we really have here is a NEW installation that has failed.
So, from the perspective of a NEW installation that is not working...
Are there any other roles, features, services, or applications installed on this server?
Did you install the Web Server Role exactly as described in the documentation?
Did you install the WSUS Role exactly as described in the documentation?
Were there any other roles, features, services, or applications installed onto this server
after your original (working) installation of WSUS?
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com
Oh, well, I have red and followed the documentation exactly step-by-step on the technet library, and I can guarantee you nothing went wrong because this is not my first installation for it
When I told you about the old damaged installation and the new installation which is also failed and showed me the same symptoms as the old one, I was sure that nothing wrong with the WSUS itself, but rather it is something wrong with the environment
Answering to your above questions, the answer for all is that: that server is only used for WSUS, nothing more
Anyway, I have managed to restore the service thanks to your previous reply where you point to the CONFIG folder inside the NET framework folder, I checked the files in there, some were changed to the date I think has stopped the service, so I repaired the
NET framework 2, and restarted
It is working fine now and syncing with the update server
Saleh Ramadan

Service Interfaces not showing in the IP when imported in ID in PI7.1

HI Experts,
     I have developed an Integration process(IP) in ESR using some Service interfaces and Operation mapping for implementing BPM.
I am trying to import the IP into my Integration Directory. But the imported Integration process(which is now as good as a Business Service) does not show the Interfaces i have used in the BPM in the ESR.
   Without the interfaces being attached to the IP, i cannot create RD and ID's.
This is the first time BPM is being configured in this server.
Please guide me if there are any settings specific to ccBPM to be done in ECC.
Please help me resolve this issue... i am in a crictical condition to meet the deadline..
Thanx in advance,
Nandan

Hi Neetesh,
         Thanx for your reply. If there are any initial settings to be done in PI, please list them so that i can check if they exist in our system.
Also,when i check(f7) my IP , its showing a message that " Container element my_interface in step Send1 is initialized but is not used ". Is this a concern ?
I have copy pasted my interface names in the RD and InterfaceDtrmn in my ID and completed the ID part of configuration.When i test the BPM by triggering my Purchase Orders from my sender service,it is showing the following error in moni:
"<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack> " in error section and in TRace its showing this error:
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 70126C4C0C4D0B11E1000000AC113034</Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
Please suggest how these can be resolved????

Web Service Security not configured on this component.

Hi Experts,
                       Before configuring the scenario, i went to RWB to check whether the comopnents are in active mode or not.
                              Integration Engine XID
                              Business Process Engine XID
                              Mapping Runtime XID
                              Adapter Engine XID
                              Integration Engines
                      All components are in Green mode Except Integration Engine, The Integration is in yellow mode
                       and shows the following details.
                     Details for 'Is Web service security available?'
                       Web Service Security not configured on this component.
Can you give the solution for this.

Hi,
                  1, While sending idoc from sapR/3 to PI , in r/3 sm58 shows the foll error:
"No service for system SAPQA,client 200 in integration directory"*
                           Even the Bussiness sytem pointing R/3.
From your initial post, it appears that you are using XID system and from above error, I believe you are trying to send the IDoc from QA system. R3 dev will communicate to PI dev, so verify the partner profile and ports in your IDoc Header settings.
                     2, When i execute the tcode sm58 in PI   it shows the following error:
                               "Syntax error in program SAPLSXI_AC_CACHE _REFERESH"
I am kinda confused how come sm58 tcode can show an error for this program, as sm58 is for checking the transactional RFCs and SAPLSXI_AC_CACHE_REFERESH is for XI Cache refresh for Alert Category. Might be some one else can explain this.
                     3, WHEN I EXECUTE THE tcode SXI_CACHE
                                         Under the *STATUS OF RUNTIME CACHE
                                                       Unable to refresh cache contents
                                                       Error during last attempt toreferesh cache
                                                         (red colour triangle leading above both)
Check this SAP Note 764176, might help in your situation.
Worth reading - http://help.sap.com/saphelp_nw04/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
                    4, Still there is no messages in Message monitoring.
Obviously because of error # 1, you are unable to send IDocs, how come you expect messages to reach PI ... strange, isn't it
Hope this helps.
Regards,
Neetesh

Urgent!! PL/SQL web service can not get output param in BPEL

OC4J 10.1.2 generate PL/SQL web service can not get output param can not get output param in BPEL when call a pl/sql webservice.
wsdl as follow:
<types>
<schema targetNamespace="http://db.func.getqf/COMMON.xsd" xmlns:tns="http://db.func.getqf/COMMON.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<complexType name="db_func_getqf_COMMONUser_getqf_Out">
<all>
<element name="pnqfysOut" type="xsd:decimal"/>
<element name="pnzqfOut" type="xsd:decimal"/>
</all>
</complexType>
</schema>
</types>
<message name="getqfOutput">
<part name="return" type="xsd1:db_func_getqf_COMMONUser_getqf_Out"/>
</message>

the wsdl which generate by OC4J is as follows:
<?xml version="1.0" ?>
- <definitions name="COMMON" targetNamespace="http://db.func.getqf/COMMON.wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://db.func.getqf/COMMON.wsdl" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd1="http://db.func.getqf/COMMON.xsd">
<documentation>WSDL for Service: COMMON, generated by Oracle WSDL toolkit (version: 1.1)</documentation>
- <types>
- <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://db.func.getqf/COMMON.xsd" xmlns:tns="http://db.func.getqf/COMMON.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <complexType name="db_func_getqf_COMMONUser_getqf_Out">
- <all>
<element name="pnqfysOut" type="xsd:decimal" />
<element name="pnzqfOut" type="xsd:decimal" />
</all>
</complexType>
</schema>
</types>
- <message name="getqfOutput">
<part name="return" type="xsd1:db_func_getqf_COMMONUser_getqf_Out" />
</message>
- <message name="getqfInput">
<part name="param0" type="xsd:string" />
</message>
- <portType name="COMMONPortType">
- <operation name="getqf">
<input message="tns:getqfInput" />
<output message="tns:getqfOutput" />
</operation>
</portType>
- <binding name="COMMONBinding" type="tns:COMMONPortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc" />
- <operation name="getqf">
<soap:operation soapAction="urn:db-func-getqf-COMMON/getqf" />
- <input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:db-func-getqf-COMMON" />
</input>
- <output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:db-func-getqf-COMMON" />
</output>
</operation>
</binding>
- <service name="COMMON">
- <port name="COMMONPort" binding="tns:COMMONBinding">
<soap:address location="http://localhost:9700/plsqlgetqf/getqf" />
</port>
</service>
</definitions>

The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.

Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

Office 365 Reporting Web Service Message Trace - It says it can get the past 30 days but i can only get the past 7 days

It says Message Trace data is stored for 90 days here: http://technet.microsoft.com/library/jj723162(v=exchg.150).aspx
When running the MessageTrace report using the Office 365 Reporting Web Service it only returns the past
7 days, even though it says up to 30 days here: http://msdn.microsoft.com/en-us/library/office/jj984335(v=office.15).aspx.
PowerShell’s "Get-MessageTrace" cmdlet only returns the past 7 days as well. PowerShell also has
an alternative cmdlet called "Start-HistoricalSearch" which returns the MessageTrace results between 7 and 90 days old.
Is it supposed to return 30 days, or is the documentation wrong, or is their an alternative report (like
PowerShell) to get MessageTrace results for over 7 days using the Office 365 Reporting Web Service?
Note: I'm aware that the results are returned in batches of 2000 MessageTrace results.

That document is pretty old last modified March 2013 so I would say it's out of date. The reporting services are still pretty new in the current release I believe 7 days is limit for the Rest Endpoint and the Get-MessageTrace cmdlet (which is what
the more recent documentation around message tracking say) there is no REST endpoint for Start-HistoricalSearch you can see all the current endpoints by looking at the Metadata via
https://reports.office365.com/ecp/reportingwebservice/reporting.svc/$metadata
These services are evolving so new features and reports are added which is explained in
http://msdn.microsoft.com/EN-US/library/office/jj984346(v=office.15).aspx . But there is no public information on Timeframes and what reports and features are going to be added in future updates (that I know of). If you need data older then
7 days then Automating the HistoricalSearch cmdlets would be the way to do it for now.
Cheers
Glen

Web services - Could not create stubs on some servers

My error is related to web services.
The problem is that on some servers I can consume webservices
and on some other not. The servers have the same configuration - at
least it look like that.
The calling page and the webservice component are in fact
very simple. The source code is at the bottom of the page.
When the web service is not consumed I have a following error
message:
coldfusion.jsp.CompilationFailedException: Errors reported by
Java compiler: Found 5 semantic errors compiling
"/opt/app/coldfusionmx8/stubs/WS941899941/DefaultNamespace/WebserviceCompCfcSoapBindingSt ub.java":
175. if (axisFaultException.detail != null) {
<-----------------------> *** Error: No field named "detail"
was found in type "org/apache/axis/AxisFault". 176. if
(axisFaultException.detail instanceof java.rmi.RemoteException) {
<-----------------------> *** Error: No field named "detail"
was found in type "org/apache/axis/AxisFault". 177. throw
(java.rmi.RemoteException) axisFaultException.detail;
<-----------------------> *** Error: No field named "detail"
was found in type "org/apache/axis/AxisFault". 179. if
(axisFaultException.detail instanceof
coldfusion.xml.rpc.CFCInvocationException) {
<-----------------------> *** Error: No field named "detail"
was found in type "org/apache/axis/AxisFault". 180. ....
When I took a look to the stubs directory I found that all
java classes are compiled except for:
WebserviceCompCfcSoapBindingStub.java
Just to save your time - I've been trying stuff with the
displayname etc... :-/
If you would like me to supply you more information - please
let me know.
Thanks for any answers.

After investigation it turned out that one of the libraries
was using java.rmi.RemoteException.class which was quite old.
Apparently when the servers were starting they were launching
the libraries in different order. So some of them were using old
version of java.rmi.RemoteException.class and the AxisFault.class
that inherited from it couldn't compile.

12002 The Reporting Web Service is not working.

Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
Nenad

Hi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Previous Photos In Messages Not Showing (Blue Question Mark)

Previous Photos In Messages Not Showing (Blue Question Mark)
iPhone 4s, updated to iOS 8.1.1, and now previous photos in messages (imessage & text) show as blue question mark.
Not viewable in details (view) either. However any new photos sent or received are viewable. PLEASE HELP!!!
(MMS is turned on & over 5GB of free space on phone)

I have the same issue. Does anybody know how to fix it?
It is really annoying... I chose iphone to be ensure about functionality and stability of this product.
Any help appreciated.
IOS. 8.1.1 iphone 5s

Web Services do not work in NSW2004S ABAP Sneak Preview

Guys,
I can't connect to the XMLA service (even though it's active in SICF) in a NW2004S ABAP Sneak Preview. Can you confirm that web services are not available in the Preview?. Will they work if i apply a patch the the SNeak Preview?
Please let me know,
Thanks,
Gili

it will work in 2004s sneak preview.
there were some problems while creating clients (2004S MiniSAP ABAP: SAPGUI crashes when creating a Web Service)
whats the exact error you are getting?
Raja

Web links do not show as visited according to my color selection in content menu. visited siles/links should be in red, mine are not chsnging sfter a visit to a sits.

web links do not show as visited according to my color selection in content menu. visited sites/links should be in red, mine are not changing after a visit to a sits. A good example would be a visit to a news article in google. mu colors are set to res for visited sites - it does not happen, in fact nothing changes

Google is using a visited color (#551a8b) that is hardly distinguishable from the unvisited color (#2200cc), so may not notice it.
* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
You can look at these prefs on the about:config page to make sure that you keep history.
*http://kb.mozillazine.org/browser.history_expire_days (180) (also affects saved form data)
*http://kb.mozillazine.org/browser.history_expire_days_min (90)

Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.

Hi,
I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
allow "Have full access via EWS to all mailboxes in the organisation".
After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
I passed this token to EWS Java APIs,
it gave me error saying:
microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
I tried similar thing with EWS managed APIs for .net. Got similar error.
Can anyone provide some help and direction to resolve this error.
Thanks & Best Regards,
Pranjal

I see you found an answer with the X-AnchorMailbox header on StackOverflow:
http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none

New Services Downloads Not Showing Up

I downloaded and installed (for all users) the the Internet Services package and I can't seem to get the services to become visible. For example, the "Lookup in Wikipedia" service does not show up in the services menu when I highlight text in Pages and open the services menu. I have:
1. Tried doing the same thing in TextEdit (with no success)
2. Tried restarting the computer.
3. Tried reinstalling the Internet Services and restarting the computer.
4. Tried repairing permissions on the disk
One thing that seems odd to me is that /Library/Services/ is blocked (the no-entry sign) to me in finder from my profile (non-administrator). Is this normal? Here are the permissions on it:
mycomputer:~ user$ ls -l /Library | grep 'Services'
drwxrwxr-x 6 root admin 204 23 Jun 08:47 PDF Services
drwx------ 14 administrator wheel 476 3 Sep 17:41 Services
Might this be the problem? (I don't want to change the permissions on this folder without knowing what those permissions are 'supposed' to be).

Thanks. I had the same problem. I checked the permissions on both the Automator and the Services folder and they were set to another user as the owner and wheel as the group. I used batchmod to change the permissions to match the rest of the folders in the /Library - root owner, group admin, users read and execute. I'm rusty on my unix so didn't go for the chmod because I forgot how.
As soon as they were repaired, my installed services finally showed up and other services started appearing. I even repaired permissions on my disk and it didn't pick it up.
It still seems really inconsistent where the services show up (menu, contextual, button on finder window) but at least I know it's sort of working now.

Complete web service message not showing next operation

Similar Messages

Maybe you are looking for