Completed 3 hr iMove project, BUT iDVD sees it as being 4 hours

I just completed my iMovie project, and am now ready to use iDVD, however, 2 issues....
1 - I've noticed that while editing iMovie, at the end of my actual movie stuff, which is 2:50:45:09 long, there's additional "dead space" that goes out to 4:00:12:19......how do I get rid of this "dead space"?
2 - this "dead space" is recognized on iDVD as actual footage, so if I can take care of problem #1, then #2 will go away
and I actually have a 3rd ?, since my movie is 2 hours and 50 minutes long, it will not fit onto one DVD, and I'm on a MacBook, not a MacBook Pro, so I don't have a DL DVD RW......so I obviously need to greak this Movie onto 2 different DVD's:
how do I break my iMovie project into 2 shorter projects to put on 2 seperate DVD's, or how do I take the 1 iMovie project and split it onto 2 different DVD's?
thx for any help in advance

excessive +trial'n error+ editing in iM could create 'stray clips', just a single frame of video, 'somewhere' at the very end of the timeline.. set the zoom-slider to max and scroll at the very end.. you should be able to 'select' that almost-non-existing clip and delete it ...
that sets your project length to correct time..
2:50 is too much for iDVD, which benchmark is 120min...( real life: ~110)
follow Dan's exellent advice about splitting epic movies into two:
http://danslagle.com/mac/iMovie/usage/5003.shtml
just to say that: double-layer sound nice in ads, but many DVDstandalones don't accept DL-r-media.. plus: 2.5h for a 'homebrewn' movie? .. my audience usually falls asleep after 20min ..

Similar Messages

IDVD '06 Sees Old iMovie Projects But Not New Ones

I have found that iDVD '06 will let you do something really neat, that ended up in me discovering something really dumb.
First, if you want to add a folder with media in it to the Media section of iDVD, you can literally just drag/drop the folder there and POOF it shows up and your media shows up.
BUT... Ugh.
iDVD '06 does NOT see iMovie '06 project files. So, if you have a folder with iMovie '05 projects in it and iMovie '06 projects in it, and you drag that folder into the "Media" section of iLife '06, the '05 projects show and the '06 projects don't.
And this all came up because of another issues in iMovie '06 (posted about over here: http://discussions.apple.com/thread.jspa?threadID=421159&tstart=0 ) in which iMovie '06 doesn't actually delete video in cropped videos, discovered because I no longer can see video snips of a current iMovie project in iDVD (I used to see just enough to use in the menus, which was fine).
So, this sounds really weird to me. iDVD '06 can't see iMovie '06 project files? That can't be right, can it?

Never resolved but marking as answered to clean up my profile and login.

Trying to share a completed iMovie project with iDVD. iMovie keeps quitting. Why?

I've been trying to share a completed iMovie project with iDVD. iMovie keeps quitting unexpectedly. Why does it keep crashing?

Click on the button near the top of the window where it says Project Library (it toggles between Library and edit Project).
Click just once on the name of the project, so that it highlights in blue.
Go to File Menu > Duplicate Project. There will now be a second project with the same name, but with a number added to the end of the name
Open that duplicated project by double-clicking it
Lastly, Check out this Discussion Thread from September
I movie quits unexpectedly during editing and publishing
from Jasonryan1. It relates to a corrupted item existing in his project. And in his attempt to troubleshoot it, he suspected it was a Title he placed in the Project itself. Once he deleted the corrupted Title he was able to successfully export it. As to which item is causing instability, that's a tricky process to narrow down. And I would agree it seems unlikely all your projects could have some corrupted element in them. But it might work to concentrate on the simplest project which is showing the symptoms you describe. Duplicate that project and start deleting pieces of it and trying to add a Title to it and see if iMovie crashes. And that's not to say it's a title, it could just as easily be a picture, a transtion or a music clip that's preventing that project from being exported.

I started to publish an iMovie project in iDVD but it failled .... the mesage was start up disk needsmore space. deleate files to make more space. how can I do that, please? in help menue thre are no entris on start up... Thank you VERY much. Michael

I started to publish an iMovie project in iDVD but it failled .... yhe mesage was start up disk needs more space. delete files to make more space. how can I do that, please? in help menue tehre are no entris on start up... Thank you VERY much. Michael

Startup disc is Macintosh HD. If your HD is getting near full capacity you'll need to offload some files to an external drive or drives.
Freeing space on your Mac OS X startup disk:
http://www.thexlab.com/faqs/freeingspace.html
How to free up my disk space:
http://www.macmaps.com/diskfull.html

Sending completed imovie project to idvd

Explain how imovie and idvd work together.
If I send my completed imovie project to idvd it prompts me to pick a theme.
Essentially re-create what I just did in imovie.
I just want to burn my completed imovie project to a dvd.
What am I missing?

Everyone should have a look at Ken Stone's site:
Authoring in iDVD 6
http://www.kenstone.net/fcphomepage/idvd_6stone.html
And all of the iDVD tutorials...
http://manuals.info.apple.com/en/iDVDAtAGlance.pdf
http://manuals.info.apple.com/en/iDVD5GettingStarted.pdf
http://manuals.info.apple.com/en/iDVDTutorial.pdf
Sue

Low quality of burned DVD even if I drag&drop iMovie project into iDVD

Hi all,
I've a iMovie HD project that I want to burn via iDVD (7.0.4).
If I click "Share with iDVD" the quality of the resultung video (which is burned to DVD) is rather poor. As I've read within this discussions, the preferred way is to close iMovie and "drag and drop" the iMovie project into iDVD.
With this way, iDVD (instead of iMovie) will render the movie, which should give a video with far more quality.
Unfortunately, the burned DVD with the "drag and drop" method has the same low quality as the video with "Share with iDVD".
I've done a little research and noticed that the "shared movie" for iDVD (iMovie project->Show package Contents->Shared Movies->iDVD) for a 1:10 video has a filesize of only 32kb!
Is there any way to set the "export" parameters for this "shared movie" (it is a quicktime file)?
The quality of the completed DVD is acceptable if I export the iMovie project to "DV stream" an import this stream into iDVD. But in this case I lose all my chapter markers of the movie ..
Is there any way to export the movie from iMovie HD and keep all the chapter markers for iDVD?
Importing the iMovie HD project into iMovie 08/09 is not an option, as I lose the chapter markers also ..
Thanks in advice,
Kind regards.

Hi,
the iMovie project was created as "DV" project and I imported DV PAL clips. The iDVD preferences are also PAL (25fps) and the quality setting is "professional quality".
I've also tried the setting "best performance" within iDVD (as suggested within this forum), but with the same poor result.
I can see within the iDVD "project info" that iDVD will use "mymovie.mov" within the "Shared Movies->iDVD" of the iMovie project (Show package contents).
As this converted movie is of low quality, I think this is the root of evil.
If I export the movie from iMovie with "Export as DV stream" and import this converted movie into iDVD the quality is ok - but I lose the chapter markers ..
Is there any way to keep the chapter markers?
Kind regards.

Several iMovie Projects in iDVD

Hi. Can I import a few iMovie projects into iDVD to create an iDVD project? Thanks.

thanks. you mean one iDVD project can actually be
made of more than one iMovie projects? i didn't know
that....
Yup. You can only export one movie from iMovie into iDVD but you can drag and drop into iDVD as many as you have room for.

How to adjust the format of an iMovie project in iDVD?

Hello there,
I need urgent help for a project.
I want to adjust the format of an iMovie project in iDVD so that not only the TV safe area but the whole clip appears on the TV screen. Is there anybody able to help me?
And is it possible to add chapters, either in iMovie or in IDVD?
Thanks a lot in advance.
Later.

While we all have MacBooks in this forum not all of us use iMovie or iDVD. There're iMovie and iDVD Support Communities where everybody has iMovie and iDVD. You should also post this question there.
https://discussions.apple.com/community/ilife/imovie
https://discussions.apple.com/community/ilife/idvd

Imovie project to idvd

I'm trying to export an imovie project to idvd. The project is a slideshow of photos from iphoto with an itunes soundtrack. When I click "create idvd project", it advises that its needs to "render & proceed" , but nothing happens. I've also tried using "Share" and clicking idvd in the imovie menu, but that does not work either. I'm using imovie 4 and idvd 4. Has anyone else encountered this?
Thanks,
Peter

Hi Peter
This is an often reported problem.
No I don't have a direct solution but
instead of using iPhoto to make Your Slide Show You could do as I do.
I start a new iMovie project
open pictures/photos in iMovie and drop the photos into Time-Line
edit:
- duration for each photo +
- adding sound and narration.
- transitions
- color correction
- etc
now
a) Close iMovie and save.
b) find the project icon/folder
c) Ctrl-click on it and Show package.
d) in this there are a folder -> Shared Movies -> iDVD
e) in this there are a QT movie nnnnnnn.mov
f) drop this into an open theme in iDVD and save it as a desktop image
(if iDVD prior HD/5 You have to add a hack to make this possibly
named HPfurz and install it)
Test this with Apple DVD-player - OK then burn it with iDVD
or Toast if You have and dont want to re-code the movie.
Yours Bengt W

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

I previously made an iMovie project, but with the new version of iMovie (10.0.1) it does not have the option to import. How do I retrieve my old iMovie project?

I previously made an iMovie project, but with the new version of iMovie (10.0.1) I cannot import the project. How do I retrieve and import my old iMovie project?

You have to upgrade your iMovie 9 projects from iMovie 10 before you can use them. See:
http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
Geoff.

Transfered DVD ( via Handbrake ) to Aperture folder. Was able to transfer still photos to iMovie project but DVD project ( in same folder would not transfer. What is correct procedure?

Transfered DVD ( via Handbrake ) to Aperture folder. Was able to transfer photo stills to iMovie project BUT DVD project in same folder would not transfer to iMovie. What is correct procedure?

I actually already checked Pondini's and didn't find the answer. Any other suggestions?
thanks

The time on the weather widget on my home screen does not match the phone time. Initially it did, but one day it started being 1 hour earlier than the phone time. I went into Settings/Date

The time on the weather widget on my home screen does not match the phone time. Initially it did, but one day it started being 1 hour earlier than the phone time. I went into Settings/Date & Time & now the time on the weather widget is correct, but the phone time is 1 hour earlier. Any suggestions??

Settings | Date and Time then select Automatic date & time, and Automatic time zone. In this way, the carrier time will populate the phone. If it's still going 1hour off, then I'd call VZW and inquire if they have a tower issue, specially if it happens in one particular place.

Combining several iMovie projects into one, time-not space-being the factor

Hello,
Space is not an issue (large external drive), but I'm trying to figure out the fastest way to combine several iMovie projects into one (so each movie will become a chapter in iDVD). I'm pretty sure there must be a better way than I'm attempting, selecting all the clips in clipviewer, then dragging and dropping to the new project clipviewer. As I've done this, the "time remaining" window keeps growing (started out about 4 minutes, climbed to "92 minutes remaining," then I aborted the move). Details: each movie is about 8-10 minutes long, widescreen, made up of various (sometimes many) dv clips, audio segments, still photos, etc.
I have added dv clips to a project via the media folder (project unopened), but this was a single item and simple to move from trash into the project. In this case, I'm not sure what to move in order to save the entire project intact.
Thanks so much for any help,
b
Message was edited by: Bimp

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

Unable to open IMovie Project in IDVD

I have created a 40 minute movie in IMovie 08 (my first). I am unable to open the movie in IDVD 08 and Garage Band. The project name is visible in the media browser but is not available for selection.
I have published the movie to the media browser and it still is not available to IDVD.
I am new to apple computers and have been unable to get help with this problem.

Here's two things to try:
This frequently helps solve some problems. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.
http://docs.info.apple.com/article.html?artnum=306290

Completed 3 hr iMove project, BUT iDVD sees it as being 4 hours

Similar Messages

Maybe you are looking for