Completely Blank Blue Screen after Laptop is woken up from Sleep

Initial State: 1) Laptop is ON
2) Laptop is connected by LAN cable to ADSL Modem (BSNL Connection).3) Internet Connection is ON.4) Browser is ON.5) McAfee LiveSafe Internet Security (Antivirus) is ON.6) Skype is ON but not connected or logged on7) Download Accelerator Plus is ON but not in use. Process:1) I leave the laptop on and untouched for 5-10 minutes while I do something else.2) The laptop is in a Sleep State when I come back.3) I press a key or move the mouse to wake it up. Final State:1) I get the initial Windows Page on which I have to click on username to login.2) When I click on it, I do not get the page where I should enter password. Instead, I get a completely blank blue screen with absolutely nothing on it. I have to hard-press the power button for 10 seconds and then switch the laptop back on losing valuable data. Please help.

Hi , Welcome to the HP Forums!
It is a superb place to find answers and suggestions! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More I grasp that when you attempt to wake the notebook from sleep by moving the mouse or pressing a key, you are presented with your log on screen. When you click your username and before you enter the password it immediately presents a blue screen and becomes unresponsive. Here are links to two documents I believe will assist you. HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8) HP PCs - Computer Locks Up or Freezes (Windows 8) To say thanks for replying please click the thumbs up button below. If this resolved your difficulty please let other people know the good news by selecting solution provided. This would allow it to be found with greater ease. Best of Luck!

Similar Messages

Satellite L500 - blank blue screen after login to Win 7

Hi
I have this laptop and i can start up the laptop and it loads fine to the login page i then can login but when the screens opens after login it appears as a blank blue screen with the document folder open i have no background picture and no startup menu nothing else except the document folder.
From there i can access my files etc and anything else internet etc everything but i dont know how to get the screen back to normal.
If i go on background display i can see the image that should be on the background and change it but nothing happens on the full screen.
I have no restore point as yet as new laptop for xmas, i do have backup discs but think its just something to do with the display.
If go into files and folders it shows me the icons on the desktop but all i see is this blank screen.
Any ideas please, if not would restore files work or full back up disc
Thanks very much for any help

Hi
Check this:
Click right on the desktop and choose Personalize.
There you should check the area: Basis design and design with high contrast
Choose Windows 7 basic.
Then reboot the unit.
Usually this should help to get the Windows 7 common design and desktop settings.
But if this will not help then you could use an fast solution which would be a usage of the recovery disk of HDD recovery option.
This would format the HDD and would reinstall everything again

Blank Blue Screen After Log In

Hello ladies and gents...ill describe the problem im having and how it occured.
I was browsing the web and playing music when my Powerbook G4 froze suddenly. I did the usual and restarted it. After the loading bar that says "Starting MAc OSX" appeared and fully loaded it went to the normal blue screen that appears when loading the whole desktop and dock...however nothing appeared and it just stayed there. I could still move the mouse around but thats it. I restarted again and was taken to a black screen and DARWIN appeared i put in my username and password and then it said "Welcome To Darwin". I let the powerbook sit for like 2 minutes and it went back to the Blue screen again, nothing loaded. Im basically at a standstill on what to do. I Do not have the installation CD's that came with my powerbook and I dont know what 2 do.
Anyone know a solution to the problem??????
And another thing, if its some sort of harware failure is there a way i can get my programs and digital design work onto an external harddrive i realllyyyy cant afford to lose that stuff.
Help is greatly appreciated.

See if this works...
Might try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (nameofvolume) appears to be OK  
If fsck found issues and has altered, repaired, or fixed anything, it will display this message: 
*** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214

Blue Screen after MS Office 2013 upgraded from Office 2007

Can you please look at the mini dump and the blue screen message and advise.
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.256.48
Locale ID:   4105
Additional information about the problem:
BCCode:   50
BCP1:   FFFFF900C230F000
BCP2:   0000000000000001
BCP3:   FFFFF960000E2254
BCP4:   0000000000000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   256_1
Files that help describe the problem:
C:\Windows\Minidump\042214-57345-01.dmp
C:\Users\gleahy\AppData\Local\Temp\WER-359145-0.sysdata.xml
Thank-you,
Gwen

Hi Gwen,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete .DMP files upon use.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Dual 7916's showing blank blue screen after 30 mins. uptime

Have any of you had this experience before? I have a 7975 series phone with dual 7916's expansion modules; The phone and the expansion modules boot-up fine but after 30 mins or more of idle time, the expansion modules display screen is Blue with no programing.This setup is working fine on other phones but is an issue on two 7975's right now. I have deleted and re-added the problem phones in CUCM 9.1 replace, ALL hardware (i.e. phone, pwr cube, expansion modules etc.) and swapped all network components. See the following Specs. below:
CUCM 9.1
7975 firmware SCCP75.9-3-1SR1-1S
7916 firmware B016-1-0-4-2

Hi Richard,
Just covering all steps here but are the expansion modules selected within the phone configuration within CUCM? On the physical phone itself, if you press the settings button and select Status, then Expansion Modules what do you see? May have to upgrade the firmware of the 7916's.
Hope this helps
Tony
Please rate helpful posts

My OS X is die ?? Blank blue Screen at start up.....

one day in the middle of use my Macbook Pro all the suddenly the screen all get scremble. and the machine just hang can't even reboot.
SO i takeoff the battery to reboot, but now all i get is a blank blue screen after the Apple Logo.
i try boot in safe mode.
i go as far as the login screen after login then just OS x10.5 default wallpaper and nothing etc ?
so how can i make my macbook work again ?
i really don't want to reinstall the OS as the comp also get another bootcamp partition.
so any suggestion ?
thx

True, everyone should but not everyone does. Some people, newcomers especially, have the naive idea that when they spend a lot of money on something it should work, so they don't worry that any day could be their computers last. I guess we all have to go through something like this so we learn the lesson. I hope that in the future he'll just get an inexpensive usb drive and use time machine if he wants. It works pretty well.
In the meantime we have to get him going again with the least criticism applied. The page I referenced is nonjudgemental and, I thought, contained the advice you gave him in a somewhat neater format.
Peace, and thanks for helping a fellow Macintosher

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Blank blue screen on macbook

I have a blank blue screen on my 2008 aluminum macbook how do I fix my problem?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Blank Blue Screen / Freezing

My iBook froze this weekend. Upon rebooting the thing, it started booting up with a blank blue screen and wouldn't go past. I tried booting into Safe Mode: Same result. I didn't have my installation disc with me so I began following these steps:
http://docs.info.apple.com/article.html?artnum=106464
I can get into Single-User mode fine and perform the commands in there, ran fsck . No Problems found. I reset the PMU. No luck. Eventually, I got home and tried to bootup using my Tiger install disc. I ran Disk Utility and it found no problems. After another reboot, the iBook boots up to a blank blue screen when loading from the installation disc just as it does when loading Mac OS X regularly. Randomly here and there, after about 10 tries, I may be able to get the laptop to boot into Mac OS X or the install disc, but it will freeze shortly after and I have to restart and get the blank screen again.
After trying the above, I took out the removable RAM and it booted up. I thought I had found the problem but shortly after it froze again. I'm not sure what the problem is but it's out of warranty and I know the answer I'm going to get is most likely hardware related.
Message was edited by: Kyle Johnson3

Hey Kyle,
So like Rhonda says the work is not guaranteed. Here are pics of exactly that problem on a recent repair I did:
"I just recently repaired a G3 iBook 900 MHz 14.1" that had the classic GPU problem. Unfortunately, while the GPU was healthy but loose before the reballing the "patient" died on the operating table. This is a known pitfall in the reballing process. So when I got the board back the GPU was working but totally dead exhibiting the dark moving shadows I've come to dread.
The GPU was a ATI 7500 so I referenced it to many other PC laptop graphics cards.
I settled on a new Inspiron 5100 ATI Radeon Mobility 7500 32Mb 9U768 on ebay and obtained it for $26 with shipping.
Dale at Superior swapped the chips and "Voila" the 900 works like new.
I have the Dell board and the 7500 chip and I thought that you all would be interested in what has been giving so many of us display headaches.
The picture is here:
http://tinyurl.com/3835w2
What you see is the bottom of the chip on the left and the mounting array on the graphics board on the right.
Even tho' this is a G3 the G4 chip is very similar."
The other place that does this work is First Phase.
Prices are like $75 for a reball and $50 for a reflow (probably not as good). You have to pull the board and send it to them.
If you want to/feel comfortable doing that email me and I can provide instructions.
You could take the bottom off and place a shim under that area we're talking about. iBooks have worked for quite a while with a shim in place. Your's might be a good candidate since it doesn't seem like there's a lot of detachment of the BGA.
Richard
Richard

Boot freezes at blank blue screen

I am completely stuck. I have a Powermac G4, which just today became suddenly unstable---apps crashing when I tried to quit them, everything freezing, logging out didn't work. So I shut it down and restarted.
Now I get the chime, the apple screen, and then the blue screen (and a mouse pointer) but at that point nothing else happens. No window showing services starting up, just a blank blue screen.
I can log into single-user mode, and the file system checks out ok. I did the cmd-opt-P-R, I reset-nvram from the Forth interpreter, all that.
I can boot verbosely, and it doesn't tell me anything because the hanging happens after it leaves the text screen and the UI starts.
Question: what should I do? Here's a related question: from single-user mode, is there any way to get files off the computer, towit accessing a USB drive or the network?
Xcott

Empty,Blue Screen.
http://docs.info.apple.com/article.html?artnum=106464
1. Start up in Safe Mode.(shift key at startup)
a. Drag the Fonts folder from the Mac OS 9 System Folder (not the Mac OS X System folder) to the desktop.
b. Drag the Fonts folder from ~/Library/Fonts to the desktop.
b. Restart the computer in Mac OS X.
c. If this solves the problem....you have a corrupt font in one of the above font folders
2. Remove incompatible third-party startup items.
a. Start up in Safe Mode.(shift at startup)
b. Open the Mac OS X hard disk.
c. Drag third-party items out of ....
/Library/StartupItems .......
/System/Library/StartupItems ... Place them on the desktop .... If you're unsure whether an item is a third-party item or an Apple-installed item, don't move it.
d.Restart the computer.
Note.. If this resolves the issue, add the Startup Items one at a time until the symptom occurs again. That way you'll know which one is incompatible. Repeat these steps and remove the incompatible item.
george

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
Tim

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Blue Screen After Load, No Safe Boot, No Reinstall possible. Think you can figure this one out??

MacBook Pro "Core i7" 2.2 15" Early 2011
2.2 GHz Core i7 (I7-2720QM)
Intro.
February 24, 2011
Disc.
October 24, 2011
Order
MC723LL/A
Model
A1286 (EMC 2353-1*)
Family
Early 2011 15"
ID
MacBookPro8,2
RAM
4 GB
VRAM
1 GB*
Storage
750 GB (5400 RPM)
Optical
8X DL "SuperDrive"
Ok so i got this laptop in a few days ago here are the problems and the things i have tried. This laptop when it came to me did not have a hard drive, so obviously no OS. Upon installing a hard drive then trying to load Yosemite from a USB stick, I turn mac on, sleep light will blink 5 times then boot, Will come to normal gray screen then apple logo, will then load the OS install, but go straight to a blue screen with vertical lines. Tried different hard drive, tried different RAM sizes and speeds, tried different OS, tried CD instead. Have done numerous PRAM and SMC resets. trying Safe mode gets me a panic cpu 4 caller error then restarts. I have tried using a hard drive that had an OS already installed and will go straight to blue screen after loading. I have tried fsck -fy in single user mode. I do get that disk2s3 is write protected in single user mode, but im pretty sure that its the OS disk. I do not see a second hard drive in single user mode but i believe that because its not partitioned yet. Any ideas community?

Tried doing OS X lion by CD now, and will only get half way through load bar before the apple logo and loading bar disappears and then it will sit at a gray screen.

Blue Screen after clean reinstall snow leopard

I have a mid 2011 that came with Snow Leopard and disks. I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest. So I just decided to take my disks and go back to Snow Leopard. I did this and it asked to go to disk utility and repair both the HD and Permissions. It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen. So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over. It didn't work, still the blue screen. (it does fine in safemode.)
I need help to get this mac running. If someone can help me......

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Blue Screen After Waking up from sleep.....

So whenever I put put my screen dowm(the laptop is on) and after while i open my screen.
There are blinking black colored lights and after while a blue screen appears and says "There is a problem in the computer or installed drivers or in a update so windows is shuttig down to prevent the damage.....
Dumping files:125 (and so on)
after it reboots by itself the windows gives me message saying "There is a problem with ATI DISPLAY DRIVER"

Hi,
Please try the Microsoft fix:
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blue-screen-after-sleep-mode/...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Completely Blank Blue Screen after Laptop is woken up from Sleep

Similar Messages

Maybe you are looking for