Completely fresh install of Solaris 10 on Ultra20

Hi Folks,
I need to completely reinstall Solaris 10 on my Ultra 20, and due to past file system problems want to make this an entirely "clean" installation.
How can I format and prepare my drive for this clean installation? No dual/triple boots will be necessary.
Recent attempts have stalled after installation upon rebooting, when it never gets past the "Configuring devices" message....
Any help/suggestions much appreciated.
DVN

Hi Folks,
I need to completely reinstall Solaris 10 on my Ultra
20, and due to past file system problems want to make
this an entirely "clean" installation.Just run a normal "initial" install rather than an "upgrade". The process will suggest and prompt for a disk layout, and it will create a new, empty filesystem on the disk.
Recent attempts have stalled after installation upon
rebooting, when it never gets past the "Configuring
devices" message....If that happens, you'll need to troubleshoot it. Post here with more details.
Darren

Similar Messages

How to do a complete fresh install on my 2009 iMac

I have couple of nagging software problems with my 2009 iMac and I would like to do a complete fresh install of Mountain Lion and start again afresh. I have done a complete backup on my Time Capsule and then select just what I want reinstalled.

If you are on Mountain Lion, then use recovery to erase your drive and reinstall it:
http://support.apple.com/kb/HT4718

Windows Server 2012 R2 with Exchange Server 2013 SP1 Completely fresh install giving errors signing into EAC

Hi,
I am struggling with a completely clean installation of Server 2012 R2 and Exchange 2013 SP1. I followed these steps:
Installed Server OS
Windows Updates
Added Active Directory Role (This is a single standalone server that would have been SBS until it was dropped)
Added DHCP & DNS
Added Certificate Services
Added Windows Server Update Services (WID Database & WSUS Services)
Windows Updates
Added Media Foundation
Added File Server Resource Manager and Work Folders
Added Windows Server Backup
Windows Updates
Checked all running without errors in Server Manager and performed a full bare bones backup.
Ran Setup.exe from Exchange 2013 SP1 disc.
Installed Pre-requisites and then rebooted
Windows Updates
Ran Setup.exe from Exchange 2013 SP1 disc.
Installation completed without errors
Rebooted
Checked all running without errors in Server Manager.
I Launch Exchange Administrative Center and get "problem with website's server certificate error" (normal on machine with self-assigned certificates). Click Continue to Website and get:
Windows Security dialog box:
iexplore - "The server localhost is asking for your username and password. The server reports that it is from Digest"
however no username and password combination will work: have tried [Administrator]; [Domain\Administrator] even created a user to no avail.
I believe the issue is somewhere in the IIS configuration because I also get the same error when trying to log into the server website from either the server or another machine on the network.
I have tried the complete installation three times now: (full disclosure not all of the same features/roles each time). On the first attempt I got this error immediately and on try number 2 was able to get into the EAC and created the mailboxes
but then it started giving the same error. The above steps are try number 3.
Any ideas?
Thanks in advance.
Andy Halford
P.S. A Follow up which might be significant: The Default Web Site is not running and will not start (it was previously running before the Exchange installation) and when I try I get the message that Another Website may be using the same port however none
of the others (Exchange Back End or WSUS Administration) are using ports 80 or 443 and I still get the error when they are both stopped.

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Can I do a complete fresh install of 10.8 if I make a DVD of the downloaded image?

Folks,
Warning: contains minor rant.
I have a Macbook Pro that I have Linux on and rarely use with OS X. However, I want to use Logic to be compatible with fellow musicians that I want to write songs with, and I cannot use this application [Logic] with OS X 10.6.8. Obv.
I've downloaded Mountain Goat or whatever OS X 10.8 is called and tried to install it, but I'm getting this error that seems to affect a lot of people in that it gives this ****ing useless message "this disk cannot be used to start up your computer". Which is clearly nonsense as I can boot into Linux and OS X no problem. I am assuming that the problem is with refit, and OS X has thrown its toys out of the pram because there's a superior operating system installed which it's sulking and pouting about.
Soooo...
...rant over...
...it looks like I can burn the 10.8 InstallESD.img to a DVD (I assume this is just Apple's verssion of an iso) and, finally, here is the brunt of my gist:
Can I use this DVD to completely wipe the hard drive, get rid of the whole lot, install 10.8 and then reinstall refit and Linux to live in peaceful harmony alongisde 10.8? This is probably the easiest option in the end as all my important Linux data is always safely backed up and Linux is very quick and easy to install.
Many thanks.

The short answer is 'yes' and here's the easist way to do it...
If you've downloaded but not installed 10.8.x, you should have a file in your Applications folder named "Install OS Mountain Lion.app". If it's not there, download it again and quit the installer. The get a 8BG+ USB thumb drive and use Lion DiskMaker (don't worry, it works with ML, too) to create a bootable installation disk.
Boot from the USB stick and use Disk Utility to erase you boot drive. Then install OS X on your machine. THEN you can re-add Linux, etc., and all should be well.
Clinton

Fresh install of solaris 10 x86 hangs after 'Configuring devices'

Hi All,
I just received a new SuperMicro server with an LSI MegaRAID SAS 9261-8i controller. While trying to install Solaris 10 it hangs after "Configuring devices". I checked the LSI page and Solaris 10 is supported according to them. Any ideas how to proceed?
Fairly new to Solaris on x86 hardware.
The system has a Xeon X5690 processor in an Intel Workstation Board S5520SC motherboard. The motherboard documents claim that not disabling usb 2.0 can hang an install. I have disabled the usb 2.0 in the bios but the system still hangs. Booting it with the -kd and -kv options don't give much information.
Any help is appreciated. I might be returning these machines if I can't get this worked out.
Cheers,
Steve
Edited by: 967729 on Oct 25, 2012 3:51 PM

See if you can add the verbose option "-v" to the kernel boot options. I think you can get to the GRUB menu off the Solaris 10 install disk. That should tell you what device is causing the hang, or at least the last device that worked.
Also, can you try Solaris 11 and see if it gets past that point? A few years ago I has a similar issue with Solaris 10 on a Dell server. Solaris 11/OpenSolaris worked fine, though. IIRC I could work around the issue if I disabled the 2nd CPU - Solaris 10 had a problem bringing up the 2nd CPU on that Dell's CPU/MB config.

Solaris 10u6 fresh install - can't get Solaris Management Console working

Hey guys,
I have been searching all over but can't seem to find any help on getting SMC working. I have a fresh install of Solaris 10u6 on a Sun Fire V20z.
So I login via ssh to the solaris machine ("unknown"), and It looks like wbem is online:
root@unknown:/# svcs wbem
STATE          STIME    FMRI
online         16:37:50 svc:/application/management/wbem:default
root@unknown:/# And netstat shows that my machine is listening on port 898
root@unknown:/# netstat -an|grep 898
127.0.0.1.898              *.*                0      0 49152      0 LISTEN
root@unknown:/# The problem is
1)
When I try to do anything in the smc launched with as
smt -toption for terminal mode, I always end up getting the message:
There is no Solaris Management Console Server running on localhost.2)
If I login from my laptop with X11 forwarding on, and launch the graphical interface, it does come up with the main window that says "Solaris Management Console 2.1" and the "Open Toolbox" window. However, in the Open Toolbox window it says "Server Not Running"
I'm not sure what I'm doing wrong, since svcs says that wbem is running... I'm pretty new to Solaris, working hard to get up to speed, so I'd really appreciate any help you guys could offer.
Thanks,
Jamie

For some reason it was able to run once by running the command
# /etc/init.d/init.wbem start
But no matter what I do, I can't get it to work one lick with
# svcadm enable wbem
Any ideas guys?
Edited by: orange80 on Nov 29, 2008 8:18 PM

Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Fresh Install or Upgrade

I currently have Windows 2003, IIS6 and CF7 and CF8
successfully running side by side on my development server. CF7 is
loaded in stand alone mode while CF8 is loaded in multi-server
mode. I have 15 CF8 instances running on that server in a
pre-development environment. Next week I will be switching over our
Development side to CF8 and just connecting it to one of the
instances on that server. As it stands right now, we are not
thinking of running multiple instances in our test and production
environments but I was thinking of installing the multiple server
configuration and with just 1 instance just in case someone changes
their mind down the road.. So,
My question is this: What is the best approach to installing
CF8 in those environments, just upgrading or fresh install? Does an
upgrade remove the previous version? If not, do I have to do a
manual uninstall? I have always done fresh installs on major
version changes as I have not wanted any previous version file
hanging around to cause problems. But upgrading seems the painless
way to go especially when it just ports all of your settings,
datasources and k2 verity collections over.
What is the best practice?

fluxxy1245 wrote:
hi
I recently purchased the latest mountain Lion.
i was wondering what was the best thing to do.
A complete fresh install
or just upgrading from the previous OSX Lion.
I have 3 macs :
- iMac 27" (2009)
- Mac Mini (2010)
- MacBook Pro 13" (2011)
The 3 of them came with with Snow Leopard.
And I did an upgrade to Lion, shortly after it was relased.
If we upgrade :
- does leave unnecessary files
- is there a difference in speed and hard-disk space
or does it manage it all very well
Thanks for the info
maybe some links would be welcome that give an in-depth explanation about that
There is some house-keeping that you need to do before/after upgrading to Mountain Lion.
For installed, third-party applications (and device drivers where indicated), does the vendor offer latest OS X Mountain Lion support. Drivers that worked in Snow Leopard or Lion, may not work well in Mountain Lion without upgrades.
You may have to re-install some third-party applications that have system dependencies that have changed in Mountain Lion.
You may have to update your Printer preferences if printers do not work after the upgrade.
You should count on a minimum of 4GB of memory (8GB is better) in each Mac.
Although the upgrade process will not touch /Users, it is sound due diligence to backup user data on all these Macs beforehand.
Upgrading is simpler, multiple Mountain Lion downloads not withstanding. If these Macs have been through prior OS X updates, they may not operate as fast as a full, clean install would deliver. If you want to do a full, clean install, download the free Lion Diskmaker. It will automatically build a bootable, USB installer for Mountain Lion from your first ML purchase and download. I used it to make a clean install on my SSD. Works perfectly.

For a complete new install, do I have to install Leopard 1st, then Snow?

Ok, now Snow is out, I want to reinstall from scratch, do I have to install leopard 1st (my iMac came with it pre installed and have disks) or can I just use the Snow Leopard DVD to install from scratch
I have backed up what I want , ie iTunes, videos, docs, and want to do a brand new install from scratch.
cheers

Ok, so I can just do a complete fresh install of Snow, I'm not bothered about archive or anything, just a fresh copy of Snow, as if it came pre-installed from Apple factory.
I dont have a Time Machine backup yet, as I all I need for backup is iTunes Library, Videos, photos, everything else I'm not bothered about. So I take it can just manually copy these to my iMac after fresh install of Snow?
Also another question....I have a Intel iMac, bought Xmas 2007, spec wise It:
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Do you think Snow will speed up my system, as now its a "bit old". It was the lowest spec when I bought it in the range (added another 1Gb RAM) but it was my 1st Mac ever, and all I could afford
cheers

Fresh install and restore

I have just done a complete fresh install of Lion thinking it would clean out all of the old programs etc from the Library, which it did. Until I used migration assistant to transfer my Documents and settings. I left the Applications, as I was just going to copy those of which I wanted by hand. But all of the old program files have been copied and some how the applications as I can open them from the dock. E.g. Chrome, which I have technically not installed yet.
How might I go about this with out loosing all my settings but only having what I want? Is this even possible?
Thanks,
Alex

4129
Hello again Ian,
"a fresh install, then just copy the applications, library and user folders from the backup drive to the fresh install"
You could do that, but be careful to:
- work from the newly created admin User you just installed
- create other User Accounts in the same order the old ones were previously created
(then import your files separately from each new other account, dragging files from each "same" old other account)
- check which Application would not work anymore, trash its preferences and reinstall it.
Keep the new Apple apps (fresh install) rather than the old, and import your old files from them.
"migrate the settings and applications from the backup drive during the setup process"
This would imply everything is fine and works well on your current system,
so,
there is no need to do a "fresh install" of Mac OS X in the first place.
--> If your current instalation is fine, you need no reinstallation at all,
or,
you can just make an Archive & Install.
Now if there's something wrong in your system that makes you want this "fresh install",
then DO NOT import anything from your old backed up libraries.
--> Why is it that you need a fresh install?
In case it's because you want new User names, something like that,
better consider my first reply method as the safest solution.
Axl

Fresh Install of Lion

I may replace the hard drive on my late 2008 MacBook Pro. I am on OSX10.5.8. Actually I am hoping that with a complete wipe of the drive I can solve some of the minor problems that are annoying me. Slowness, heating up etc… Nothing major, but after nearly 4 years of heavy use some gremlins are creeping in. I have performed all the maintenance and diagnostics that should be run but never wiped the drive. I have upgraded the ram and know that my machine meets the minimum requirements for Lion.
Since I have full backups in Time Machine can I just buy the OSX Lion Thumb drive and do a fresh install?
I see that the license agreement does call for Snow Leopard but some on this forum and elsewhere say you can skip it if you do a complete fresh install. Will doing this cause any problems for me in the future?
Thanks

but you will always need to use the USB flash drive because you will not have Snow Leopard and cannot download Lion.
That's an interesting corollary.
Surely you can open a MAS account and register the purchase? Otherwise, it is obviously better to purchase the 10.6.8 disk and install that first, then purchase Lion, so that you have a MAS history and in the future can re-download if necessary.
What happens to the Recovery HD process in your instance, with only a USB?

Migrating, Fresh Install, or Best Approach?

I'm currently running Mountain Lion on this late 2008 MBP. For the past couple years it's had issues where it goes off into never never land and I believe it's from corrupt system files or something. Sometimes it's different programs that cause the issue like if I open Preview, Text-Edit, etc. The computer will work fine unless I open one of them and then it just starts running totally sluggish and getting stuck. Closing the programs doesn't fix the issue. I'll have to restart and avoid those programs as long as I can. I've also noticed normal image files of mine and files I created going corrupt at times for no reason. I've tried every thing in the book, upgraded operating systems, run repairs, purchased new HD etc. Nothing fixes it.
So, I'm finally upgrading to Yosemite and figure now it's the time... once and for all... to fix the issue by doing the first complete erase of the OS and fresh install after all these years. So right now I'm cloning the drive to an external via Data Rescue 3. Once that is complete then what is the best approach here to be sure none of any corrupt system code or anything makes it over so that it's like I have a brand new MBP (just that's really old...LOL)?
I'm thinking the migration option from the external backup clone I'm making would be best but with that I'm not sure how it installs the old programs if you chose to have it copy the apps over. Won't it copy the apps code from this install? If that's the case it sounds like migration might be a bad choice for me as it's risking possible corrupt code back in? At the same time I want my settings, images, passwords, email, iPhone backups, music, etc. So won't it be really difficult if I don't use the migration choice or is it simple to copy that stuff over? Please advise on the best and easiest way for me to get what I need onto this computer but without letting any possible old corrupt code in...
Thanks!

fluxxy1245 wrote:
hi
I recently purchased the latest mountain Lion.
i was wondering what was the best thing to do.
A complete fresh install
or just upgrading from the previous OSX Lion.
I have 3 macs :
- iMac 27" (2009)
- Mac Mini (2010)
- MacBook Pro 13" (2011)
The 3 of them came with with Snow Leopard.
And I did an upgrade to Lion, shortly after it was relased.
If we upgrade :
- does leave unnecessary files
- is there a difference in speed and hard-disk space
or does it manage it all very well
Thanks for the info
maybe some links would be welcome that give an in-depth explanation about that
There is some house-keeping that you need to do before/after upgrading to Mountain Lion.
For installed, third-party applications (and device drivers where indicated), does the vendor offer latest OS X Mountain Lion support. Drivers that worked in Snow Leopard or Lion, may not work well in Mountain Lion without upgrades.
You may have to re-install some third-party applications that have system dependencies that have changed in Mountain Lion.
You may have to update your Printer preferences if printers do not work after the upgrade.
You should count on a minimum of 4GB of memory (8GB is better) in each Mac.
Although the upgrade process will not touch /Users, it is sound due diligence to backup user data on all these Macs beforehand.
Upgrading is simpler, multiple Mountain Lion downloads not withstanding. If these Macs have been through prior OS X updates, they may not operate as fast as a full, clean install would deliver. If you want to do a full, clean install, download the free Lion Diskmaker. It will automatically build a bootable, USB installer for Mountain Lion from your first ML purchase and download. I used it to make a clean install on my SSD. Works perfectly.

I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have

I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have a complete inventory of all my catalogs.

<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

I have a used iMac, HD wiped, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements won't start saying "could not complete because of missing or invalid personalization info." previous owner's name still there preventing initialing?

I have a used iMac, HD wiped clean, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements was installed but won't start saying "could not complete because of missing or invalid personalization info." is previous owner's name somehow still there preventing initialing? How do I remove and install my own? I don't understand as HD was completely wiped with no OS when I got it.

I think Adobe allows their software to be installed on 2 computers only. However, if say you buy another computer and wish to install PSE on the new computer ( effectively a 3rd computer as far as Adobe is concerned ) PSE needs to be properly uninstalled ie not simply by uninstalling using the operating system's uninstall process. It needs to be uninstalled using the Adobe uninstall process that is contained within the software.
You should then be given a prompt as to whether you will be reinstalling on the same computer or if you wish to remove altogether. If the latter, then all traces are removed and the software can be (re) installed on the new computer.
If, unknown to yourself, the software had been installed on 2 computers and although you or the previous may have wiped the hard drive clean, as far as Adobe is concerned the software is still ' registered / assigned ' to 2 computers.
If the previous owner bought a new computer and installed their PSE on it, wiped the hard drive clean without properly uninstalling/removing PSE thentherein probably lies the prblem.
As Allan Jones said, it 's probably worth your while to purchase your own copy.
Hope this helps.

Illustrator CC 2014 won't launch (Could not complete the requested operation) even after fresh install (3 times), anyone know how to solve? (Windows 8.1)

Hi guys, my Illustrator CC 2014 won't launch, getting an error message "Could not complete the requested operation", this is not a specific file issue I can't launch Illustrator stand alone. I've un-installed and re-installed about 3 times and contacted support but they haven't been able to solve as of yet. It's a relatively fresh install of windows 8.1 and no custom fonts have been added. I've tried deleting the preferences folders and launching and that has not had any effect. No idea what else I can do, any help would be greatly appreciated.
Edit: Forgot to mention I have also tried running Illustrator as administrator and that Illustrator was running perfectly fine on this computer since install (about 2 weeks) before this started happening.
Thanks
Chris

Hi Jacob, I decided to completely remove the entire creative suite from my computer, ran the cleaning tool (although some errors showed in the log file) and it now works! Let's just pray it stays this way haha. Thanks for the suggestion.
Log File:
[Thu Mar 05 10:18:58 2015] Choose from one of the following options to clean up :
[Thu Mar 05 10:18:58 2015] 1. All
[Thu Mar 05 10:18:58 2015] 2. Adobe Flash Player 10.2
[Thu Mar 05 10:18:58 2015] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Thu Mar 05 10:18:58 2015] 4. Creative Cloud 2014 only
[Thu Mar 05 10:18:58 2015] 5. Creative Cloud only
[Thu Mar 05 10:18:58 2015] 6. CS6 only
[Thu Mar 05 10:18:58 2015] 7. CS5-CS5.5-CS6
[Thu Mar 05 10:18:58 2015] 8. CS5-CS5.5
[Thu Mar 05 10:18:58 2015] 9. CS3, CS4
[Thu Mar 05 10:18:58 2015] 10. Adobe Id credentials
[Thu Mar 05 10:18:58 2015] 11. Quit
[Thu Mar 05 10:18:58 2015] Choice :>
[Thu Mar 05 10:19:00 2015] User selected: All
[Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
[Thu Mar 05 10:19:00 2015] List of products installed on this machine
[Thu Mar 05 10:19:00 2015] Listing products for cleanup:
[Thu Mar 05 10:19:00 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Thu Mar 05 10:19:04 2015] Are you sure you want to clean all the listed products and associated files?
[Thu Mar 05 10:19:04 2015] Type (y) to confirm and remove or (n) to quit ... >>
[Thu Mar 05 10:19:06 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Thu Mar 05 10:19:06 2015] OSVersion : 64-bit
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:Adobe Creative Cloud
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:AdobeCEPServiceManager
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsManifestBaseURL
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsUpdateCheckInterval
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:LogLevel
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AAM
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.1
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.2
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\Users\Public\Desktop\Adobe Creative Cloud.lnk
[Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Creative Cloud.lnk
[Thu Mar 05 10:19:06 2015] CoreSync custom hook not found
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Retry deleting the folder since folder still exists
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Some files could not be cleaned up. Please try closing your internet/web browser, and rerun the Cleaner Tool to complete your clean-up.
[Thu Mar 05 10:19:06 2015] :: Cleaning-up left over inventories ::
[Thu Mar 05 10:19:06 2015] Inventory: 'AdobeApplicationManager-1.0' Type: SelfUpdate, Action: NoDelete
[Thu Mar 05 10:19:06 2015] Found AAMref : ACC.aamref
[Thu Mar 05 10:19:06 2015] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: True
[Thu Mar 05 10:19:06 2015] Removing content of Product : CS5Installer, Version : CS5
[Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] LOG FILE SAVED TO: C:\Users\Chris\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Thu Mar 05 10:19:07 2015] Adobe Creative Cloud Cleaner Tool completed successfully
[Thu Mar 05 10:19:07 2015]
[Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Mar 05 10:19:07 2015] ---------------------------------------------------------
[Thu Mar 05 10:19:07 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Thu Mar 05 10:19:07 2015] ---------------------------------------------------------

Completely fresh install of Solaris 10 on Ultra20

Similar Messages

Maybe you are looking for