Completely FROZEN after restoring ??

My ipod froze and i tried to reset it several times using the menu & select buttons as instructed.
I also have let the battery die & recharged it fully - it was still frozen.
I have now RESTORED my ipod which seemed to work fine using the latest updater but the ipod screen is now frozen on the language choice setting. Itunes has let me put all my tunes back onto the ipod but obviously cant check this as its frozen on the language setting stage. It wont allow me to do anything... Please help - DESPERATE NOW !!

ME too! In order to get rid of the !folder I restored using the Jan10 2006 updater. All seemed to be going well but it sticks on the language screen and no button will work. It is like it is stuck on hold or something. When I reconnect the ipod after doing the flash charge with the AC adapter my PC recognizes the ipod and appears to be downloading songs but again it is stuck on language acreen and all buttons are stuck. Of course it was 2 weeks out of warranty when the thing started malfunctioning. Tried resetting of course-no luck.
I was using FOXFIRE browser but then used Explorer with the same results it that matters. PLease Help!!

Similar Messages

  • Ipod touch still frozen after restore

    ipod touch still frozen after restore

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPad 3 frozen after restoring in iTunes

    I'm new to this...less than a month old iPad. It has been frozen for 18 hours after trying to restore in iTunes. I have read discussions and nothing works. Any ideas? Thanks.

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • My computer is completely frozen, after two days of installing yosemite

    Two days ago I did the Yosemite update. I did the vault security encryption because it was suggested. After it, the login was taking longer than before, but the laptop was working fine. Then I shut down the computer from the initial page after it was asleep, and then I took it with me. When I turned it back on, all normal, the pages I was reading were there, and after a couple of hours of using it, it began to freeze, doing nothing but the horrible rainbow circle. I had to force quite. It restarted normally, but once I opened an application it just stayed loading there. Again forced shut. The same thing. The following time it just didn't even go into the desktop, just a blury background and the horrible rainbow. Nothing else happened. Sounds like Yosemite just screwed my computer, and now I have to wait until Monday for a technician. Does someone have a clue of what could've happened?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Time Machine wants to do complete backup after restore

    I had to restore my system from a Time Machine backup because of a recurring problem. Now Time machine wants to backup my entire drive as if I'm actually starting over. I've got 300GB left on my backup drive and this complete backup will use 133GB of it. I have had to do this in the past but I don't remember that Time Machine wanted to do a complete backup before. Is there something I can do to prevent it?
    Thanks,
    Frank

    See User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
    Might find something helpful in the above.

  • Iphone frozen after restore

    i recently got my brothers iphone 3gs for christmas after he got his new iphone 4s, last night i connected it to tiunes to restore it to facroty settings, i let it work away as it was taking a while and when i came back to it itunes was showing the iphone connected and a big screen with just iPhone in the middle of it and no way to get into the settings of my iphone. my phone then asked me to insert my sim card with no pin code to activate the iphone on the screen that showes the phone is connected to itunes, i done that half an hour ago and screen is still the same, what have i done wrong or what can i do to fix it?
    any help is well appreciate.
    thanks

    the phone was connected to ituen on my pc till itunes froze and stopped responding, so im downloading itunes 10.5.2 on my moms laptop and going to try and connect it to this and try the restore again, but when i was doing the restore the first time i had my sim card in the phone, it was taking a while so i left it work away and when i came back to my computer nothing showed in the progress bar and in the main screen where youd see all about your iphone and do updates and restore the phone is now a white screen with just iphone in the middle of it,
    tried rebooting the phone with the sim card in it and it still starts up the same showing the usb connection and the blue itunes symbol. starting to annoy me now as only got the phone yesterday

  • Lumia 920 completely frozen after Cyan WP 8.1 upda...

    Phone was working fine until I updated to cyan firmware wp 8.1. The upgrade went well, then when the phone rebooted it just froze on the AT&T flash screen (white circle with blue rings on white background). Did numerous soft and hard resets on my Lumia 920 but again it only goes as far as the AT&T logo screen and then freezes. Phone is un-responsive, won't turn off until the battery completely drains. Essentially my phone is dead.
    I installed Nokia Software Recovery Tool hoping to revert my Lumia 920 back to "Black" firmware. But my only option is to install the Cyan firmware again which makes my phone lock up. I have done this repeatedly with no success.
    Is there anyway to get Black firmware back on my Lumia 920? I think this is the only solution. Thanks.

    Your phone was connected to the outlet?
    If during installation consumes a certain percentage of battery and not connected to a power outlet installation stops until you connect the plug.

  • Iphone frozen after restoring

    Hi!, Recently I bought a used iphone 3g, it was working AOK, but to save a little time I decided to perform a full reset but my iphone froze after restarting and now only show de Apple logo and iTunes won't recognize it, I've already tried all advises of http://support.apple.com/kb/ts1538, any hint what could I do next?
    Thanks in advance.

    I think I solved it, use DFU mode, http://www.youtube.com/watch?v=tuXaa9mxKZE

  • My iphone 4s is frozen after downloading is 08 what can i do?

    My Iphone 4s is completely frozen after downloading the new iOS 8. Any suggestions?

    Hello Pierre Merone,
    It sounds like you cannot get your iPhone to respond to anything you are doing after installing iOS 8. I recommend you reset your phone with this process, which should get your phone back on track:
    Turn your iOS device off and on (restart) and reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Local snapshots not working in Lion after restore from TM

    After some problems I must restore my MB Pro from TM backup (fresh Lion install and then restore from TM using User Migration tool).
    From that point I can't get "local snapshot" working. Normal Time Machine backups are working OK (I must did new complet backup after restore) when I'm connected to my home network, but I can't see any local backups in "Star Wars" view. "Star Wars" view is not accessible when I'm not connected to my TM drive.
    When I open /Volumes/MobileBackups folder in Finder, I can see MobileBackup volume mounted, but it have name coded in some hash (3lvtSzcL34......). Inside of this volume is standard /Backups.backupdb/[Computer Name]/.. structure, but with only one snapshot with date and time when I restored my MB Pro from backup.
    I was looking online bud didn't find any info, how to get it wokrs again.
    What I already tried?
    - repair disk permissions - didn't help at all, only 5-8 permissions were wrong on some Java Library
    - disabling and re-enabling TM - no change. After disabling TM, MobileBackups volume is unmounted, mounted again after enabling but with different hash name
    - manualy turn local snapshots on/off - using tmutil enablelocal/disablelocal have same effect as above
    Is there any way how to delete current MobileBackup volume so it can be created again?

    Your best bet is to install iWork '09 the same way you did originally, if that was a download and install package or a disk. Once we got into the era of the App Store, things became more difficult. If that's the case for you, you could contact App Store support, I suppose, and see what they recommend.
    If all else fails and having iWork '09 is really important to you, you could purchase a disk from Amazon at a very reasonable price.
    Jerry

  • I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

    I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My iphone 4s is frozen at restore after trying to update

    After syncing to itunes my phone tried to update to ios7 and is now frozen at  restore.  Itunes is unable to restore itat gives error message 21.  Phone will not open past the apple

    Thanks but I have already tried that .  It seems that the phone is frozen at the screen showing the plug and connect to Itunes.  Itunes cannot restore and keeps giving me error #21.  I looked that up and followed the fix but astill note working.

  • My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

    My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

    Hello, VvioletT. 
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues syncing your iOS device.  Here are a couple articles that I would recommend going through when experiencing this issue.
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Resolve issues between iTunes and security software
    http://support.apple.com/kb/ts3125
    Cheers,
    Jason H.

  • Ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over

    ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????

    ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????

  • Iam from india i have purchased iphone 3gs for seconds and i restored it, after restore completion i got a problem of no sim installed .... iam worried plz help me what to do

    iam from india i have purchased iphone 3gs for seconds and i restored it, after restore completion i got a problem of no sim installed .... iam worried plz help me what to do

    dheeraj2468 wrote:
    now what i have to do ? :-(
    Return the phone and get your money back. That phone was hacked and is now permanently damaged.

Maybe you are looking for

  • How do I notify Apple of a software failure:  in Win 7 64 bit, using Get Info function causes iTunes 10.5 to fail and exit?

    I have Win7 64 bit running iTunes 10.5. When I import a CD and click on the "Get Info" context menu item for the CD drive item on the left side of the window, the expected context menu and input boxes appear. When I type anything into any of the avai

  • SIGSEGV on install of 9ias on Solaris

    Install says 100% complete, I am happy, but then disaster strikes - GUI disappears and I am left with Java errors:- Trigger altered. Trigger altered. SQL> SQL> Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Pron With the Partitioni

  • Im stuck in a loop !!!!!!!

    hi every one im new to java...i was given a psuedo code to perform a while loop but whe i run it it keep repeting the first part my code as follow.. import java.io.*; public class Mark { public static void main(String[] args) throws IOException{ Buff

  • Syncing iPhone from other computers

    I am unable to download the latest version of itunes to my computer. Can I log into itunes on my wifes computer and upload my apps to my new iPhone 4?

  • Bpc7.5 calling bpc packages withinn ssispackages

    All, I am trying to find a good documentation as well as create SSIS package which will call import, manage dimension packages within SSIS. What are the steps to execute the task within SSIS package. Thanks