Completing the DVD

I am using FCE, and export my files to iDVD in quick time format. I am mainly doing weddings, and like to present the DVD to customers with chapter settings and a 'theme.'
I find iDVD frustrating as there is a limit to the file size in iDVD. What other packages are available to complete the DVD before burning.
I am looking a Roxio titanium toast 10 pro. Does anyone have experience on this package?

I am looking a Roxio titanium toast 10 pro. Does anyone have experience on this package?
I have an use both.
IMO iDVD is the better option for you job you require. It's very customizable so can give the client a non-canned look. eg. The completed DVD can have menus, thumb nails all from their particular event, fonts and size are also customizable.
1 hour 20 mins will fit and Chapter Markers are certainly possible.
As mentioned the iDVD settings play a role in how muchwill go into a DVD as does menu options.
Al

Similar Messages

DVD Pro 3 locks up after completing the format phase can anyone help?

I am very experienced with FCP & DVDSP3. However, starting this week my entire computer locks up after I start to burn a dvd in dvdsp3? I have tried everything I can think of please help. I have burned several dvd's using same footage. I thought maybe the disk were dirty (fingerprints etc.) I have tried several dvd's but nothing works. Help please!!

Yes the project was built by me. I have burned several copies from the same file. After about the 10 copy it started to freeze. My disk drive would keep running but it sounded as if it was stuck. The program stopped responding at this point. I'm using Apple DVDRW. I also tried using Maxwell (poor decision). Do you think it's the program or the dvd burner (hardware). thanks for the help.

How do I install bootcamp on the new drive that I installed with the dvd drive adapter

Hello, I have a macbook pro mid 2012 13 inch, I have just earned some money, enough to buy a SSD, and I happily went to the store and bought a samsung evo 840 120gb SSD. My plan was to clean install windows 8.1 on the SSD, I already had bootcamp on the 500GB HDD with windows 8 that came with the mac, so I backed up the important files from the windows partition. I deleted the partition, and restored it to the mac's partition (which I was going to partition again after the windows installation is complete for the storage for my windows partition) I made a installation usb with the iso I have made with bootcamp assistant, and waited. After that was done I restarted my computer holding the option key, then I booted into the EFI boot partition, and went through the process, entered the serial key, and agreed the thing, and then when I did the format it said it couldn't do it, so I took it out put it in an external hard-drive case, then I plugged it into my windows 8 laptop, then I opened command prompt, then I typed "diskpart", then after the administrator thing popped up, I clicked yes, then in the diskpart prompt, I typed in "list disk", and my SSD was disk 1, so I did "select disk 1" then I typed "clean" Then I went into the drive manager, then a thing popped up saying which one would I choose between MBR or GPT so I selected GPT, then made a new NTFS partition on the SSD, then took it out, then I popped it back in then went through the installation, until the actual installing part where after copying files is done, this pops up "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D" So I downloaded a torrent because I had thought that this was corrupted, and downloaded a torrent from a website, and downloaded the iso, and I tried and the same error, again and again of taking out the drive from my computer to format it and putting it back in again (since there was some files made on the SSD) so I had decided that I would download a windows 8 torrent, then I did then it couldn't even start, so I want to install windows 8.1 on my macbook pro, on a separate drive in the the DVD cage (not external, internal), would there be any way to do it, please help!
Specs:
Macbook Pro Mid-2012
OSX 10.8.5
i5-3210m
Samsung 2x4GB 8GB RAM (Dual Channel)
Hitachi 500GB (comes with it) in the normal hard drive cage
Samsung EVO 120GB SSD in the DVD cage

1. The disk layout in OSX Disk Utility.
2. Choosing the Free Space partition.
3. Executing the installer
4. After the installation, from W8.1 Disk Management.
5. On a soon-to-be-released OS, diskutil list before and after W8.1 EFI installation.
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         128.7 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                 Logical Volume on disk0s2
                                 AFB7276E-51EF-478F-98A1-47D941BD9843
                                 Unencrypted
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         128.7 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:         Microsoft Reserved                         134.2 MB   disk0s4
   5:       Microsoft Basic Data                         126.4 GB   disk0s5
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                 Logical Volume on disk0s2
                                 AFB7276E-51EF-478F-98A1-47D941BD9843
                                 Unencrypted

Could not complete the video frames to layers command because the file could not be opened

I recently learned to make gif images using KMPlayer and my Photoshop CS6, but today I hit a snag that I can't seem to get around. Normally I capture a scene from a show DVD I have in KMPlayer and then import the video frames into layers/frames in photoshop with no problem. Well today I went to do that, and captured the scene with what seemed like no problem (the small captured scene saved with no problem) but when I went to CS6 to import the video into layers, I got the error message "Could not complete the video frames to layers command because the file could not be opened". At first I thought it was the KMPlayer saving the files wrong, so I retried and got the same error message. Irestored the players settings back to a default and the file still wouldn't open in photoshop, and then I even tried uninstalling/reinstalling the player trying to get it to work, and then I thought it must be photoshop, because even scenes I had captured at an earlier day that worked perfectly fine when importing would not open.
What could possibly be causing this problem to occur. Should I uninstall/reinstall photoshop and see if that works, or am I doing something wrong?
The files I'm trying to import are AVIs as always, I even tried to capture scenes in other formats to no avail. What could be causing the problem?

I uninstalled an reinstalled photoshop totally and it didn't fix the problem either. I made a post on the KMPlayer's forum hoping for an answer but I haven't recieved one yet. I'm starting to think it's the kmplayer having a problem capturing, since I've started getting the error "could not import the file to layers because the file has no layers" sometimes in photoshop, but I'm still trying to work around in photoshop to see if the problem came from there.

The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36)

I recently did a clean install on a 2011 MacBook Pro with Mavericks. Went to install Adobe Acrobat 9 with the DVD media and about 3/4 of the way through the install, the install stopped and the following window appeared: The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36). I've tried to install a few times and get the same message. Is Adobe Acrobat 9 incompatible with Mavericks. I've seen some posts on Apple Support Communities indicating that it is indeed compatible, but no explanation why the error pops up.

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

Finder cannot complete the operation because some data in.....

Hello everyone.
I burned about 10 TDK DVDr's about a month ago. I didn't get any errors while burning them and put them directly into cd cases to prevent them from getting scratches or marks. I just took them out to copy the files back to my Macbook. As soon as i start to drag and drop the files, the dvd player starts reading the files, copies some of them, and about 20 seconds in to the copy it powers down and displays the following message. This is true for all 10 of the dvds i burned. It copies to my hard drive for about half a minute...and then the drive powers down.
"Finder cannot complete the operation because some data in (NAME OF CD) could not be read or written (Error Code-36)."
Does anybody have any suggestions? I'd hate to think that all of the dvds are coasters now because i have data on them.

hi easeupjosh,
did you ever get help with your DVD-Rs?
I am having the same problem and was wondering if there's someway I can salvage the data on my DVDs?
thanks

I removed my optical drive because i added an ssd hard drive. when i plug in the dvd to usb it will not play from the macbooks dvd program. the error message is there was an initialization error, a valid drive could not be found.

I can go into disk utility and see the optical drive and mount what ever cd is in the drive and quicktime will play it. but i would like to have the dvd program recognize the optical drive and open what ever is in it.

Freakin amazing! I installed a new 1TB Samsung SSD in my main hard drive slot and moved my old hard drive into my DVD slot and moved my DVD to an external DVD case and it would never work with movies, only software disks. I have Late 2011 Macbook Pro running Mavericks with 1TB Samsung SSD and a 512GB HDD in the DVD slot with my DVD in an OWC external DVD case.
I tried this trick but at first, this did not work because OxED was saving the new file as a text file and not a unix file. I was perplexed until I read the comments below the article and found the tip to use Terminal to change the saved file to a Unix file. I have never used Terminal before and I had no clue what I was doing, but I just followed the steps to a T and it worked. It took two tries with Terminal.
The comment mentioned "Code:" so I typed that along with the rest and it didn't work. I tried it again and this time just typed
chmod +x (with a space after the x) then dragged and dropped the saved dvd file from my Desktop into Terminal and hit enter. Worked great. Thank you. I have my DVD player back.
I also had to play around with some permissions and I had to remove the original file completely from the "A" folder, before I dropped the new file back in.
Took a little work, but I am back up and running. Thanks to all who contributed to this and yet OWC definitely needs to have all this in their manual or even provide a disk or software download that does this automatically.
Here is the trick: http://macenstein.com/default/2011/07/how-to-get-your-external-super-drive-worki ng-in-lion/
Be sure that the new file saves as a Unix file. If it doesnt save as Unix, you will need to:
Open Terminal.
Type: chmod +x
…with a space at the end (and do NOT press enter yet).
Then, drag the saved file you want to change from whereever it is saved and drop it on top of the Terminal window. The file path and filename should automatically fill in (and you should ensure that there’s a space between “+x” and the file path).
Press enter.

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Windows could not complete the installation recovery error message with HP recovery discs

While doing a system recovery on an HP G72-b50US notebook using HP purchased recovery DVD's, the reboot "Welcome" screen always (tried 5 recovery attempts from scratch) generates the error message "Windows could not complete the installation. To install Windows on theis compuiter, restart the installation". any attempt at a reboot, even into safe mode, regenerates this same error message. How does this get fixed to allow completion of the installation process?

I wish I could tell you.
I also used the HP factory recovery disks on an 8200 Elite CMT. I used them once before with no problem.
The second time was a show-stopper. The recovery process would ask for all 4 disks, then the recovery installation would begin, reboot continue on, everything normal.
Then on the last reboot, when the recovery program stated it was configuring windows, it just quit and stated Windows could not complete the installation.
I made sure that I had absolutely nothing connected to the PC except the keyboard, mouse and monitor.
The only thing I can possibly think of was that I installed a Radeon HD 6570 video card which I replaced the Radeon HD 6350 card with. However, both cards are supported in the PC, and I cannot remember if I did the restore with the 6350 the last time or the 6570.
Now, the reason the ISO file will work is because this is a plain and simple Microsoft Windows 7 ISO file--the very same one that you download when you purchase W7 online from the very same download site.
It is not PC-specific and will install on any PC in the world.
A recovery disk is PC-specific, and is a very complicated mish-mash of programs, drivers, operating system, all customized for your specific model PC. Even something like installing a new hard drive or memory can foul up the works.
The downside of using the plain MS disk is the only programs and drivers you can install are the ones found on your notebook's support and driver page.
The upside of using the plain W7 installation, is you normally end up with a better performing PC, free of bloatware and unnecessary running processes.
For someone like me, it is a non-issue, but for others, they may miss some of the included software.
But that is better than having a computer that is of no value with no operating system installed, wouldn't you agree?
Paul

Equium P200D PSPBNE: device manager does not show the DVD-RW DVR-K17A ATA DVD/CD

Hello experts out there i need urgent help!!
My Equium P200D all of a sudden it decided to show the DVD/CD Drive in device manager as no longer working due to a corrupt driver??
I am running Vista Home and despite deleting the drive and trying to update the driver nothing seem's to work can anybody help i am getting to the point of throwing it out of the window.
Regards
Stephen

Hi dude
This issue is known to me it happened to me too
The problem is you Windows registry!!!
One registry entry is corrupt and therefore the CD/DVD ROM does not work as I should.
So what to do.
Firstly remove the driver from the device manager. Just simply delete it.
Then access the registry and and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the notebook.
Check it out

THE WORDS IN MY TITLES...... AREN'T SHOWING UP WHEN I PLAY THE DVD's ON TV!

I'm using two different title windows....LOWER THIRD & UPPER. The words show up fine on the computer but in playing the completed DVD's in the DVD player, the LOWER THIRD bottom line and the UPPER only line, aren't appearing on the TV screen. I'm using iMovie'09. Can this be corrected without starting all over again???

Hello TayTaySereno,
If you have still not been able to reset your security questions, I would recommend reaching out to the Account Security team for additional assistance:
Contact Apple for help with Apple ID account security
Thank you for using Apple Support Communities.
All the best,
Sterling

"TIme Machine could not complete the backup"

My Time Machine has started giving this message. It says it needs 69 GB and only 60 GB are available -- but it is a 500GB drive. I thought it was supposed to delete old backups when it did not have space? That is what it has always done before. What do I need to do?
Thanks
Bob

I kept getting that error message, too. And it was with Leopard 10.5, since my Superdrive failed to mount the SL DVD that was under warranty. Apple repair facility sent me a defective disk, so that didn´t help, either.
Finally after foregoing backups for 3 months, I got the Superdrive replaced by a 3rd-party rapir facility and then installed SL. As I also had a new hard drive installed and the Apple repair facility threw away the old hard drive, I WAS REQUIRED TO USE MY 3-MONTH OLD BACKUP.
This worked, so I now have a 640GB WD drive on my 2.6GHz MBP with SL 10.6. I Formatted a Western Digital MyBook in HFS+ and the GUID or whatever, according to Apple instructions for an external backupdrive.
THis drive was working perfectly as a backup drive when connected via USB directly to my MBP.
When connected via USB to my Airport Extreme 500GB Time Capsule, it also worked fine... ONLY THE FIRST TWO DAYS!
Suddenly and for no apparent reason, I am suddenly getting the following error message when Time Machine ties to do a backup to the WD drive connected to the TC:
Time Machine could not complete the backup. The backup disk image "/Volumes/drive/baackupname.sparsebundle" could not be created (error 22).
I have tried connecting both wirelessly and via ethernet from my MBP, but neither of these mattered. I access the internet just fine, and I can see the Time Capsule disk just fine. I also see other network share. Why does Apple seem to be so difficult once you peel the shiny facade away?

Problems while burning the DVD

I have worked a little with Encore 1.5.1. This is my first attempt with the upgrade to 2.0. I love the features but have run into a number of problems when I actually attempt to build the DVD. On three occasions the burn has encountered errors during the build/write process. Messages like "Preparing project for Build failed" and "Stream type invalid" have occurred. Once the build seemed to work but the resulting DVD does not play on either a DVD player or on my PC.
I have no build errors (by the way, I like the Check Project functionality) and I can preview the project with out a problem.
A potentially related issue... Encore runs very very slow on my system. I have a P4 with 1 Gig memory. The old version of Encore ran fine. Premiere has good performance.
Any suggestions on how to fix the burn problem?

Andrew,
As Ruud states, PP does not recognize DL DVDs, while Encore does. However, with 1.5 hours of Video, you should not need DL. With good transcoding specs., it will easily fit on a DVD-5 (single-layer).
I'll bet that you are looking at the size of your Exported file (what format is it - DV-AVI?) and figuring that THAT will not fit on a 4.7GB DVD-5. What you have to allow for is that either PP, or Encore will "transcode" the file to MPG-2 for the DVD, and it will compress that file. If you have already Exported to MPG-2, you need to look at your Export settings, as they are likely too high. They may also be too high, for any DVD player to actually play the DVD.
A very nice feature of Encore is that if you feed it a nice DV-AVI file from PP, it will automatically choose the correct settings to fit the file onto a DVD-5 (provided that you have set DVD-5 in your Disc tab). If you wish to do all of the math yourself, and not rely on Encore to do it for you, then you'll need to study up on "bit budgeting." This forum would be a great place to start, with a "search." However, you will likely need to spend a great deal of time learning this, plus you'll need a few "tools," most of which are freeware, though not 100% intuitive.
The next stop should be Jeff Bellune's "Focal Easy Guide to Encore2." Even if you have CS3, which includes Encore3, Jeff covers bit budgeting and that part will be the same. Some buttons and switches will likely have changed between the two versions, but the principles will be the same.
Still, most of us rely on Encore's automatic transcode settings, until we have a really involved project with specific Assets.
Considering the age of the original thread, and how far down it is on the forum, I'd suggest that you start a new thread. First, I'd set it up a bit differently, than the one that you tagged onto this thread. State what your Assets are, which programs you are using and which programs you have at your disposal, or plan on acquiring to complete your Project. Next, a bit of info on your system, might help others, should they have to "trouble shoot" your Project. It would look a bit like this:
Five hours of DV tape, Captured into Premiere Pro X and edited to a 1.5 hour Project with stereo Audio from the original tape.
Exported from PP to DV-AVI (file size) as elemental streams DV-AVI Video and PCM WAV Audio.
Imported to EncoreX as a Timeline. Imported 3 Menus from Library(details).
Desired medium for Export = DVD-5 to be played on both computers and stand-alone set-top players.
System: Intel Core2 Duo 2.6GHz, OS=XP-Pro SP2, nVidia 8800 GTX, 4x 250GB SATA II HDDs, Adobe PP2, Encore2, etc.
This way, we'll know what you have, what you want, what gear you're using to get there, and what you've done so far.
Good luck,
Hunt

Completing the DVD

Similar Messages

Maybe you are looking for