Completing value contract

Hi all,
I have a problem about the completion of value contracts.
I have defined that the document type that releases these contracts is a ZOR sales order document type. Is this correct or I should use WA Rel. to Value Contr.   document type?
I have chose as completion rule of both WKC and WKN item categories (for WK1 and WK2 contracts) the E rule u201CItem is completed after full target value is referencedu201D
Also at the copy control between ZOR-WK1 and ZOR-WK2 , I have set  the field Update document flow  to  u201CXu201D. 
I create a sales order with reference to a value contract and I reference there the full value of the contract. After that, the released value of the contract has been filled in correctly with the target value, but the status of the contract instead of u201Ccompletedu201D, it remains u201Copenu201D. 
Please let me know if there is something I can do about it.

Hi Katerina,
Please go to T-code VOV7 --> Select your item category --> click on "Details" --> Check the feild "Completion Rule"
Please see what is in the feild, it should be A or B or C but its should not be Blank.
I suggest make it as E -->Item is completed after full target value is referenced
Please check and revert back with your findings.
Regards,
MT
Edited by: M T on Mar 1, 2010 7:16 PM

Similar Messages

  • Release Value not Updated to Value Contract

    Hi,
    I'm trying to set up a value contract and subsequent sales order (release or call off orders).
    My document flow and copying control have been set up such that after I have created a value contract, I can create a sales order with reference to the contract. The contract data and items get copied over to the sales order. But after I have saved the sales order, the release value is not updated. Also the reference status in the contract item is 'Not reference'.
    Did I miss out any important configuration?
    Help would be greatly appreciated.
    Thanks,
    HweeLing Tay

    Hi,
    Yes the update document flow indicator has already been checked 'X'.
    The contract item category completion rule has already been set as 'E'. I have tried with C or D but still doesnt work.
    Any suggestion?
    Thanks,
    HweeLing Tay

  • Target value in value contracts

    Hello people. I have an issue with value contracts in ECC 6.0 (trx VA41). Usually when you put the target value in your resume screen, that value goes directly to the WK00 condition (because I´m working with the standart price determination Wk0001). But that doesn´t happen in my instalation. The system gives me a error of price calculation: missing Wk00 condition (message V1801).
    I checked other 2 systems, but they are working fine. I checked the configuration (conditions, price determination, items, header, copy control) between that systems and mine, and it´s the same.
    Additionally, I found this sap note (549875), which says:
          +2. Question: What is a value contract characterized by in SAP?
                  Answer: The completion rule of a value contract item is E (TVAP-ERLRE) that is, the item is completed if the full target value is referenced. The target value of a value contract item is saved as a condition, for example, WK00, on item level. +
    In other hand, I checked OSS notes and this forum, but I couldn´t find the answer. Anyone have any idea to solve this issue? Thanks a lot.
    Edited by: Rodriguez Gutierrez German Sigfrido on Nov 17, 2010 7:56 PM

    Hi,
    The error suggests that the WK00 is present in your pricing procedure, but is missing.
    Check If you have any other pricing condition type like ZK00 (Copy of WK00), and both WK00 and ZK00 are both present in pricing procedure. WK00 is a manual (no access sequence) and required entry in standard value contract pricing procedure.
    If you are not using any other customization in pricing and using standard WK00 condition type, then the error should not occur.
    regards,
    Vaibhav

  • Value Contract WK1 - no reference possible

    Dear Experts,
    I am currently checking out the use of the value contract WK1 for a long-term customer scenario.
    I used contract type WK1, item type WKN, completion rule "E" and with check of the target value.
    The contract has a target value (I checked VBAP-ZWERT, it's filled correctly)
    When I try to create a TA with reference to the contract by entering the materials or using the assortment I immediately get the message:
    "Target value of value contract has been exceeded!
    Value contract: 0036000001, Item: 000010
    Difference rate: 0,00 EUR
    You cannot copy from this value contract item!"
    The item has a value of 10.000 and I don't get the chance to enter a material number.
    I tried it with or without assortment, but it didn't work either, So I'm a little stuck now, how to get going with this?
    Thanks in advance & Kind Regards
    Benjamin

    Dear Ankur,
    thanks for the replay, but I want to use the value contract for checking if the value is exceeded. I entered a value of 10000 Euros, there is no sales order related to this contract yet, so as far as I understood this process, it should be possible to create a new sales order with reference to the contract. The released value should then be reduced by the sales order I created until it is exceeded. If I turn off this check the value contract makes no sense at all for me, because this is the reason why the businnes wants to use it.
    Kind Regards
    Benjamin

  • Value Contracts - Target value at header

    Hello Gurus,
    I have a scenario where in we need to provide the target value in the contract for all the items present in the contract.
    I am using the value contract type wk1, its only allowing me to provide target value for each material. Is there a way to have the value contract for all the materials in the contract.
    I have used assortment module with no use....
    Thanks and regards,
    Pavan P

    Mark teh condition WK00 as header group condition. The target value would be applied for the complete order.

  • Value Contract vs. Qty Contract

    Hi All,
    For Value Contract the system asks for Target Value in the header of the Contract. For example, if the target value is 10,000USD and I enter in the Target Value field in the contract and when I goto Item Overview the system's asking for Target Qty and Unit Price. Does the total of all the line item have to addup to the Target Value in the Header? I still can save the contract with the target value as 10,000USD and just a single line item with value of 50USD.....This doesn't make any sense.....Why is the system asking for "Target Value" when the line item can be under the Target Value???? Then what is the purpose of Value Contract?
    Any explanations for this?
    Thanks in advance.

    Hi
    Contract is the document that consist of terms and conditions (say Max value as you said 10000USD, validity date in value contract) or (maximum qty and validity date in qty contract).
    The document created with T.Code ME31K is known as Contract.
    With respect to This we need to create a release order in ME21 specifying delivery date, qty and price to supply it to vendor. You can create relese order upto the maximum value or qty specified in the contract with in the validity date.
    For given contract document you can create N number of release orers (but shoild be with in max value and validity date).
    USES:
    This type of document is used where there is bulk requirement of material/service is needed.  At each time they won't create PO, they will have an agreement with the vendor and send the signed contract document and vendor will supply/provide service as per our requirement.
    Our requirement is specified in relaese order.
    Hope will be helpful for you.
    Rgds
    Srini

  • Value contract and pricing procedure.

    HI All,
    I am working on value contracts. I have configured value contract and other related things. But I have some querries:-
    1) Can I use standard order as release order for value contract?
    2) Do I need to create a different pricing procedure for value contract?  If Yes  wont it conflict with the pricing procedure determined in the relaese orders?
    Kindly guide.
    Regards,
    Danny.

    1)Can I use standard order as release order for value contract?
    Ans: If you use the standard order as the release order document type, how would your restrict a particular customer for the orders (release)
    For example: you have something as FOC value Contract.
    Now when you can create a standard order same as the release order , how will you restrict the users from creation of orders for a particular customer.
    2) Do I need to create a different pricing procedure for value contract? If Yes wont it conflict with the pricing procedure determined in the relaese orders?
    Ans: To explain the q1 better , take the example of FOC value Contract( Free of costs)
    Say : you business offers free products to customers.
    Now the release order will can have a different pricing procedure than the Standard.
    The difference would only be a R100 condition type which will make the price as Zero but the taxes will be applicable.
    This explains why you should have a different order type for release orders.
    regrads,
    A S

  • Value contract - Need restrcition of amount in PO for contract line item

    Hello Guru,
    I want to create a single value contract (WK) for multiple years .. say 3 years with target value as 450K USD with three line items for each year of value 150K USD.  I would like that when buyers create a PO system should not allow them to create release purchase order for each line item more than 150 K for the year. Can somebody tell me how to configure that?
    Here is my current config example :
    Contract #ABC - Target value 450 with validity date 1/1/11 until 12/31/13
    Line item 1 - 150 K
    Line item 2 - 150 K
    Line item 3 -  150 K
    Now when I create PO with respect to contract#ABC line item 1 - system allows me to create PO with more than 150 K but gives me error message only if I exceed more than 450 K (because message 06/042 is error in config).
    The requirement is to create a single contract for the vendor. Can somebody help me to figure out the way to restrict PO amount by each year limit by standard or custom configuration?
    Thanks, Sachin
    Edited by: sachindubey on Feb 29, 2012 10:15 PM

    Hi,
    As far as I remember it was simple logic!
    Something like
    Goto EKPO select KONNR ;
    If  KONNR != blank (Not equal to blank)
    Do not allow to change condition type u201CPB00u201D
    Also incorporate addition date check for your need

  • Release Order for Value Contract WK1

    i dont want to create sales order with referance to contract.
    i have done below.
    1. i created assortment module in wsv2 tcode for value contract
    2. i created value conract (type WK1) in va41 tcode
    3. i created (messages about outline agreement) "check at item level and copy if unique" sales doc type OR in tcode vov8
    so, when i created a sales order (OR) without referance to value contract, i want the sales order to find the related contract at item level and copy
    but sales order cant find the material in the assortment module that i created in contract type wk1.
    where am i doing wrong?
    Edited by: manas han on Jul 6, 2010 11:14 PM

    Hi,
    Firstly, I assume you have properly setup all the copy control of of the document types you want to use and also properly defined the document types and item categories you want to use.
    Maybe you want to check/try the following: -
    1. Check the validity of the assortment module you have created.
    2. Try to create the assortment module again using tcode WSO1.
    3. In your Order Type "WK1" and under the "Contract", maybe include the subsequent Order = OR
    4. Check that your material has the product hierarchy properly setup?
    5. Finally, try to use indicator "B: check at item level" instead of "D: check at item level and copy if unique". You would not get a dialog box in OR if you use indicator D as it will automatically copy to the OR if there is exactly one reference document created.
    Hope this helps.
    Thanks.

  • Release orders for value contract

    Hi Folks,
    I have question on value contract.
    Customer contract is fullfilled by issuing orders against the contract. When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract. System checks this value with "Outline agreement target value" in value contract and issues warning or error message depends on configuration settings in value contract item catagory.
    We have business scenario where system has to check net value of value contract rather than checking "Outline agrrement target value" in value contract. Because we offer some discounts to customer in value contract thus net value of the contract differs from agreement value. So that system will issue error message when release order value exceeds net value of value contract.
    Is there any customizing settings available to meet the requirement?
    Awaiting for your inputs.
    Regards,
    Prabhaharan

    Hi,
    In transcation VTAA at item level have your own cory requirment code which will calcullate net value of the doc, hope this works out
    regards
    sriky

  • Release Value Contract Report

    Hi,
    As we can get individual customer released value contract amount through T Code VA43 and report Via T code Z_XX_SD_059 for mass customers which is usually not giving the correct amount of released from value contract. The report which is extracted via T code Z_XX_SD_059 normally not reconciled with the end result of T Code VA43.So, Is there any other T code for getting correct release value contract report for multiple customers? Please share if anyone knows.
    Regards| Adnan Mahmood

    Hi,
    tcode Z is an in house development. Check with an abaper why there are differences with respect to VA43.
    Regards,
    JM

  • Discount issue on a value contract

    Hi Experts,
    I have created a value contract which contains 4 materials.
    I have put a Discount % on Gross of 5 % on the header thinking that it will have an effect on the target value but when I create a Contract Release Order it's appears on the material item level.
    How can I put a discount on the target value, please ?
    Thansk in advance,
    BR,
    Cesar

    Thanks for the quick reply.
    I would like to create a value contract which contains material to be release against the conrtact.
    I have a target value on the header and the contract contains 4 materials (I do not want to put any target quantity at material level, only price)
    Requirement: I would like to create PO's with the contract release order functionality and to put in the PO the material (contained in the value contract) I need.
    But: I don't want to put any target quantity on material level (just a price) and I need the system gives message if the target value (on the header) is exceeded by the total amount of the material release against this contract (in all the PO's created)
    Can I manage this ?
    Thanks in advance.
    BR,
    Cesar

  • Configurable Material : error while creating value contract

    First snapshot of our Configurable Material  'Material 01'
    In MM03 > Basic Data 2
    under Client specific configutarion
    Cross-Plant CM : (material 01)
    Varient (checkbox checked)
    In MM03 > MRP1
    MRP Type: PD
    In MM03 > MRP3
    Plant-specific configuration
    Configurable Material : Material 01
    Varient (checkbox checked)
    Planning Varient (checkbox checked)
    When we are raising value contract, we are getting error
    'Material 01 has status: Configure to Order'
    In Item category assignment we have assigned Zw1 (value contract doc type) on lines of 'OR doc' type  as follows
    SaTy ItCGr Usg   HLevltCA Difftc MltCa
    Zw1  0002  blank blank    TAC    TAM
    Zw1  0002  blank TAC      TAE   
    Zw1  0002  blank TAE      TAE   
    Zw1  0002  blank TAM      TAC   
    Still we are getting same error .how to resolve this.
    Thanks
    Rohit

    closing...

  • Problems in creating a Value Contract

    Hi,
    I'm trying to create a value contract using VA41.
    The process succeeds for one sales organization, but for another sales organization, I am getting a line in the document incompletion log, saying G/L account data is missing. This is despite the fact that a G/L account IS assigned to this sales organization in VKOA. Even when doubleclicking the error message, and getting to the Analysis Account Determination, it is clearly seen that the system did find a G/L account!
    After getting deeper into this, I found that the problem is caused by the item category of the contract line item, which has Revenue Recognition category B (Service-related revenue recognition). If I change this value to blank or a different value in the item category definition (VOV7), then I am able to add the line and save the contract.
    The question is whether there is a place where this sales organization (or the company code above it) is defined not to be able to accept lines with Revenue Recognition B? Or maybe I am misunderstanding this whole thing, and the problem is of a different kind?
    Thanks in advance for your help,
    Amit

    Hi Sri,
    Thanks for the quick response.
    The item category group is not NORM but our company's own item category group - YNOR.
    This is not the issue, as this item category group is assigned to the material also in the sales organization that works...

  • What does it take to complete a contract?

    Hello Gurus,
    I would like you to use a Sales Contract. Change the completion rule of the according Item Category to 'Not relevant for completion'. When you reference a sales order to this contract item, the contract status will stay open. What does it take to complete the contract in this case??
    Thank you!

    HI
    In copy control of Item Category maintain Create document flow records in Update document flow so that when ever the material is referred to subsequent document the status of doc will be completed OR enter the reason of rejection in line item.
    Regards
    Santosh.A.R

Maybe you are looking for